I've setup a PPTP server on my ubuntu 11.04. PPTP settings seem to be OK and I can connect to my machine from a Windows PPTP client. But then I dont have access to Internet from my Windows machine. Authentication is successful and I can see GRE traffic to my PPTP interface on my Ubuntu, but I can't reach any host (including Internet) after my Ubuntu machine. I suspect this is a routing or NATing issue.
View 1 RepliesI am a newcommer to Centos. I should connect to internet via a pptp vpn connection. I created the connection in "network connections". In other distrows I could connect to created pptp vpn connection simply by clicking on network-manager-applet and selecting the connection, but there is no network-manager-applet in Centos. Is there any way to connect to the vpn connection I created or I should go to do it by manually editing config files?
View 3 Replies View RelatedI'm running an own PPTP Server, but I can't get it to access the internet. All my PCs at home run in the 192.168.0.0/24 net, the PPTP Server has local IP192.168.0.5 and remote IP 192.168.0.80-99. The router to the internet is at 192.168.0.1, and the IP of eth0 on the machine where the pptpd runs is 192.168.0.4. I want to be able to connect to the internet trough that VPN and access my local LAN servers (which works fine so far). I can ping internet and local IPs successfully, but can not access them with a browser, or connect to them in any other way. I have 'accepted' all in/output and forwards.
I am running a Squid proxy on the same machine, and if I do:
iptables -t nat -A PREROUTING -j REDIRECT -i ppp0 -s 192.168.0.0/24 -p tcp --dport 80 --to-port 3128
I can access the internet through Squid, but of course Jabber/ICQ etc. Won't work then because it just refers port 80. But I want the PPTP Clients to connect to the internet directly, if I don't use that rule it's not possible to load any pages. But pinging works all the time. DNS is also working fine, but I can't even access webpages via IP directly. How can I allow the PPTP IPs 192.168.0.80-99 to get direct access to the Internet with Iptables?
I have started a newly started a VPN-service with some friends and are offering both OpenVPN and PPTP-vpn.The OpenVPN works perfectly, but we have some problem with the PPTP.It is possible to connect to the VPN, but once connected you can't get any type of access to the outside world ( the interner ).I've googled (Ok, not I, but the tech-guy has) and havn't found any solution so therefor we try here.We are running Debian 5.0 on a XEN VPS.On the machines we've tested OpenVPN works like a charm.
View 12 Replies View Relatedi have installed Linux i.e ubuntu 10.04 on my PC in which i have installed pptp client and able to connect it successfully but problem is that it unable to browse internet. in windows it works fine.
View 1 Replies View RelatedI'm looking for a way to tunnel the internet connection of my Ubuntu VPN server to the remote client.The server is running Ubuntu Server 9.04 64-bit, and has a fully functional installation of Poptop and Squid. Is there a way I can get internet requests from the VPN client to tunnel over the VPN and be connected through Squid? I'd think this would be a iptables thing, but I'm not sure.
View 5 Replies View RelatedI am trying to connect to a PPTP VPN at work, and I cannot accomplish that. Both server and client are using Ubuntu 10.10.
Code:
Jan 7 11:32:26 multicore-dev03 NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
[code]....
I've searched the forums (250 thread limit) for a fix on this, but all the questions seem unanswered or unrelated. My situation is this: I'm running Ubuntu x64 10.10 'Maverick'. I have a cablemodem connection for my Internet access. I have home network running on DD-WRT with the dreadful Linksys WRT54G series router.
My DD-WRT router is 192.168.1.1, subnet 255.255.255.0.
My Linux box is 192.168.1.61, subnet 255.255.255.0.
I have a VyprVPN connection set up successfully on Linux. Mostly everything works great, speed's fine, latency is what I expect it to be. Except... I also run an SSH server to remotely admin the box at port 22, an Apache server running over SSL at port 7001, and a Transmission web client at port 7002 (only secured by basic HTTP realms auth). All of these things worked before I got the VPN working, I'm of course using NAT at the DD-WRT router.
The endresult I am looking for, is to have the security and protection of the VPN (even if it's only perceived) for everything I do on this machine -- EXCEPT on Apache, the Transmission web panel, and the SSH server, which I want to access from the outside world. I have no firewalls running or configured, not even iptables, not even the SPI firewall on DD-WRT. All connections to the aforementioned services from the outside world timeout coming in to the Linux box. They all work from inside my home network (182.168.1.0/24). In case it's needed, he's my routing:
[Code]....
i have a VPN server PPTPD on Centos 5.3
eth0: 62.2.2.x (public on the internet)
GW: 62.2.2.1 (cisco router)
i want to configure my ppptp server to allow users access internet with their own public ips of class 62.2.3.0 62.2.4.0 62.2.5.0
every time i configure my server all users can get thier IPs but they only go out with my server IP same as NAT not routing.
can you show me the proper configuration to make my users connect with public IP and have internet access. use specific DNS ( i did this but some users can not brows by DNS)
is there any way to specify an expired date for each pptp user.
I'm trying to connect to a Microsoft ISA PPTP server from my Linux box. The box I'm connecting from is itself a router. I have no problem connecting a Windows XP machine to the VPN via this machine. This is fine, but I would rather connect via the Linux machine, giving me far more advanced routing options (i.e. no to send every packet from the XP box completely unnecessarily via the PPTP tunnel). The Linux router is running Debian Lenny.
I've checked iptables. There were initially some issues. I've fixed those.
Invoking pppd from the console, I can see that authentication succeeds, but then some negotiation goes wrong and the server terminates the connection. Here's the output from pppd, with the more sensitive stuff removed:
Code:
<hostname>:~# pppd call <peer> nodetach debug
using channel 19
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe3e45f75> <pcomp> <accomp>]
code....
I have cent OS 5.5, i am not getting proper command for the same.
View 6 Replies View RelatedI am going to build a Linux VPN server(PPTP) for my friend but here is the problem: He don't know Linux and command line to manage users, monitor server, etc
View 1 Replies View RelatedI recently installed Kubuntu 10.10 on my machine, and I configured the PPTP VPN connection through which I connect to the internet. I can successfully connect, but it works really slowly. Slower than it does on Windows 7 on the same computer, with the same settings for the PPTP dialer. In about 20 minutes after I connect, the connection fails and even the modem restarts itself. I tried setting the MTU for the pptp connection to 1400 (I checked, and 1372 is the maximum value before the packets start to fragment + 28 bytes for the IP/ICMP headers), but nothing seems to help.
View 3 Replies View Relatedsince installing opensuse 11.2 KDE, is that I can connect to the local resources when I'm not connected via the pptp vpn to the Internet but as soon as I establish an Internet connection, I cannot. Under Windows and other distros I've tried, this has never been an issue, usually I can connect to either local or Internet resources, interchangeably. In a nutshell, I don't know how to troubleshoot this.
View 9 Replies View Relatedeverything works fine, clients can connect to the vpn server with no problems and they can ping local machines! but no internet access through the vpn connection unless i uncheck the default gateway option on my client machine which is not what i want. I want my clients to get my server's ip address. my server is behind a router (router's ip : 192.168.0.1 | server's local ip: 192.168.0.100) so i used localip 192.168.0.100 & remoteip 192.168.0.234-238 in pptpd.conf. it think there is something wrong with routing or firewall rules, because it seems that the DNS resolution works .. when i try to browse a website my browser says "Waiting for xxxxx.com..." and it stays on that stage forever ! the funny part is that google.com works fine (don't know how).
p.s :
* I have already opened the port in on my router. I even tried it locally to make sure that the router is not the problem here. * already added ms-dns 208.67.222.222 / ms-dns 208.67.220.220 to pptpd-options. (found another guide that suggested to do this, before adding these two lines even dns resolution was not working.)
In my client side, i got 4 machines(2 database server,2 application server). One database server for DC and another database server for DR. Similarly, I need to use the application server also. The two database server are having the same ip.(192.168.1.10) and two application server are having the same ip(192.168.1.11). But they give the another ip for all machines like below.
DC-Database server-10.168.12.40 DC-application server-10.168.12.21
DR-Database server-10.168.13.40 DR-application server-10.168.12.21
Now i want to do the IP Natting.
I have been using ubuntu for my college work for some time, and suddenly last week for ubuntu users in a specific Department/building lost the ability to connect to the internet through the school proxy.The problem seems to have effected only our department/building .
What is so annoying is even its the same computer we have internet if we use Windows but no internet for ubuntu.When using ubuntu the DHCP server automatically assigns IP's just as before, and we can reach the Default gateway using ping, but cant reach the proxy server. When we ping the proxy we get a message saying it refuses a connection. When using firefox or chrome we get the same message when we try to browse <proxy server not available>. The network guys says that the only change they did recently is to activate ipv6. But i fail to see how this can become a problem.
I had installed openvpn in linux machine (public ip) remote pc.. and installed client openvpn in windows xp machine (local network )remote pc... ...how can i accesss openvpn server to access local lan network without performing NATING in firewall.
View 2 Replies View RelatedTrying to connect to my office as a PPTP client, I have setup my PPTP connection in Ubuntu 10.04, and the connection is active, as I can see from the top bar, and the output of ifconfig:
Code:
eth0 Link encap:Ethernet HWaddr 00:18:8b:b7:a3:ef
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:580 (580.0 B) TX bytes:580 (580.0 B)
ppp0 Link encap:Point-to-Point Protocol
inet addr:192.168.0.166 P-t-P:192.168.0.254 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1
RX packets:9 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:108 (108.0 B) TX bytes:96 (96.0 B)
wlan0 Link encap: Ethernet HWaddr 00:19:d2:7a:96:e5
inet addr:192.168.1.107 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::219:d2ff:fe7a:96e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8525 errors:0 dropped:0 overruns:0 frame:0
TX packets:8496 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5799296 (5.7 MB) TX bytes:1408867 (1.4 MB)
Now I want to access the folder named ABC on the remote PC with IP address of 192.168.0.12, with username USER1 and password PASS1.
I'm trying to connect to [URL] but it will not work no matter what settings. I have ticked MPPE, configured gateway, username, MSCHAP and MSCHAPv2 are ticked, using 128-bit encryption. I have tried to forward port 1723 and 1127 in my router, I have also ticked "enable PPTP PassThrough" in the router. I cannot telnet to vpn.itshidden.com. This is on Ubuntu Lucid. These are my logs from an unsuccessful connection attempt:
[Code]....
I am having trouble connecting back to my vpn at work while I'm at home. Mainly need to get our local svn repos for at home development. I successfully connected to the vpn following this [URL]..I am running Lucid Lynx 64bit and I followed the 9.10 section of the tutorial on setting up PPTP connection.
It worked fine. Then I walked away from my computer and it was disconnected when I came back 2 hours later. I was unable to connect back to it. I used my laptop which is running windows 7 and it connected just fine. So, now I am unable to connect to it and have no idea why. I viewed my system log and don't know what to do with the information. Could someone help me out on this.
Jan 18 18:51:43 david-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Jan 18 18:51:43 david-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 5532
Jan 18 18:51:43 david-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections
[Code]...
10.04 Ubuntu, Have tried every single combination of fields in the Advanced options area when setting up the VPN.
Code:
Apr 25 02:48:10 John NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Apr 25 02:48:10 John NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 12263
Apr 25 02:48:10 John NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections
Apr 25 02:48:10 John NetworkManager: <info> VPN plugin state changed: 1
Apr 25 02:48:10 John NetworkManager: <info> VPN plugin state changed: 3
[Code].......
I just installed ubuntu 9.10 but there isn`t pptp VPN on Network manager. How can I install its packages?? I dont have any internet access on my linux because the only way to connecting to the internet is pptp VPN for me.
View 1 Replies View RelatedI setup a PPTP VPN connection in ubuntu 9.10 (x86_64) using NetworkManager. After enabling the VPN connection, I can browse web pages (it's perfect) but after a while the vpn connection is terminated! The following is my syslog after connecting and terminating:
Code:
Mar 12 22:10:10 amir-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Mar 12 22:10:10 amir-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 2204
[Code]....
Having problems connecting to a work's VPN server.syslog output pasted here:
Code:
Sep 7 22:45:31 localhost NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Sep 7 22:45:31 localhost NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 1771
Sep 7 22:45:31 localhost NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections
[Code]...
I got this working om my laptop but on my desktop this keeps going wrong, its an upgraded system to 10.04. Made a standard pptp connection using network-manager (and the connection is 100% fine, working on laptop and on windoooz machine) This is syslog any ideas, i reinstalled network-manager-pptp and pptp-gnome, but no go no go..
[Code].....
I am trying to connect my pptp client Linux to a pptp Linux server using modem but no success. I can only tweak ppp linux side Observing the following log I found it�s due to MPPE Support configuration mismatch in pppd, pppd (linux client) is refusing to accept MPPE encryption.
pppd[24545]: pppd 2.4.5 started by root, uid 0
chat[24547]: abort on (NO CARRIER)
chat[24547]: abort on (NO DIALTONE)
chat[24547]: abort on (ERROR)
chat[24547]: abort on (NO ANSWER)
chat[24547]: abort on (BUSY)
[Code]....
i have a Domain Cotroller installed on Windows & DHCP Server installed on Ubuntu. i want to give access only authenticated Users(Active Directory Users) can get IP from DHCP. No one else canis there any option available here in DHCP ???
View 2 Replies View RelatedI tried to configure my vpn connection using pptp from the shell following following tutorial: [URL] now, if i use Code: pppd call novax to connect to my vpn i see following appearing in /var/log/messages:
Code:
Feb 10 21:11:57 reg-laptop pppd[2655]: pppd 2.4.5 started by root, uid 0
Feb 10 21:11:57 reg-laptop pppd[2655]: Using interface ppp0
Feb 10 21:11:57 reg-laptop pppd[2655]: Connect: ppp0 <--> /dev/pts/0
Feb 10 21:11:58 reg-laptop pppd[2655]: CHAP authentication succeeded
Feb 10 21:11:59 reg-laptop pppd[2655]: MPPE 128-bit stateless compression enabled
Feb 10 21:12:00 reg-laptop pppd[2655]: local IP address 10.243.249.22
Feb 10 21:12:00 reg-laptop pppd[2655]: remote IP address 10.243.249.20
verifying with ifconfig, my ppp0 ip is correctly set to 10.243.249.22 - i can also ping this ip but i tried to ping other ips in our network and i can't reach any of them - did i mess up the route maybe? Content of my /etc/ppp/ip-up.d/route-traffic:
[Code]...
I am running 64-bit 9.10 on a Acer Aspire 1810T. I can connect to the internet via both wifi and the Novatel U998 modem. I have a PPTP VPN that works correctly via wifi, but does not work via the modem. The obvious problem would be that the ISP is doing something... but I'm dual booting Windows 7, and the ISP's Windows based software is able to connect to the VPN without issue.
I'm running VMWare player to be able to access my required Windows apps, so I'm almost in a position to dump MS if I can get this VPN issue resolved.