Fedora Networking :: Monitor Broadband Internet Traffic Only ?
Aug 23, 2009
I have a 2 machine LAN with both machines having an ethernet card and a wireless card. There is a Netgear router, both eth and WiFi, allowing both machines to access the internet.
On my Linux machine I am looking for some software that allows me to keep track of my broadband usage on that machine, excluding traffic between the two machines.
There are numerous such programmes for this in XP, which use Winpcap and a GUI frontend. The "other" machine on my LAN is XP and uses just such a program.
View 4 Replies
ADVERTISEMENT
Mar 9, 2009
Is there a nice easy to use tool that displays (in KB/s) the internet traffic from every IP on a network?
Currently I'm using iptraf, but it's very hard to understand at times.
A little info on my network:
I'm using SNAT for internet sharing.
View 4 Replies
View Related
Apr 27, 2010
We have something on our network that is reaking havoc with our content filter. I am trying to track it down, but so far I have been unsuccessful. We have approximately 500 devices in 100+ different locations spread across 9 states. Looking at each computer is not really feasible.
I need a machine that can sit in between our network and our internet connection and graphically monitor in real time and logs how much traffic each device is sending and receiving. It would need to sit inline so it has to have two nics and be able to pass traffic. The machine also needs to be transparent. Reconfiguration of our routers or workstations is not an option.
I have used ethereal and wireshark before. Ethereal may be a viable option, but wireshark seems to provide lots of information, but no practical way to make use of it. how to set up the box to be a transparent device on the network that will allow internet bound traffic to flow (freely)?
View 3 Replies
View Related
Mar 8, 2011
Ubuntu system monitor applet doesn't show internet traffic although my wireless is working just fine. I use a conky to monitor bandwidth through vnstat and had no problem till I upgraded to maverick.
**ifconfig
wlan0 Link encap:Ethernet HWaddr 00:24:d2:c4:3e:da
inet adr:192.168.0.100 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::224:d2ff:fec4:3eda/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
View 1 Replies
View Related
Mar 6, 2010
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
View 3 Replies
View Related
Apr 5, 2009
Does anybody use successfully a broadband internet service on Fedora 10? I'm seriously thinking of buying a wireless card but don't know if it will be compatible.
View 7 Replies
View Related
Oct 4, 2010
I tried to preupgrade to f14 and cancel it after some time. Now, I am facing a problem that I cannot access internet from mobile broadband; but I can access net while i am connected via ethernet or wireless. I have cleared preupgrade files with
Quote: yum clean all; yum remove @preupgrade
$ uname -rs Linux 2.6.34.7-56.fc13.i686.PAE
It can detect my HUawei modem and creating an IP as well. But no Internet. Can you tell me the reason?
View 1 Replies
View Related
Nov 8, 2010
I would like to be able to monitor which programs are allowed to access the internet, but a search for programs to do this has turned up nothing. Preferably, I would like a notification to come up every time an application uses the internet. Is there any (n00b friendly) software available to do that?
View 2 Replies
View Related
Feb 1, 2011
In Fedora 14 (kernel 2.6.35.10-74.fc14.i686) I am not able to get an internet connection on my laptop via mobile broadband. However dialing succeeds and the provider starts the daily flate rate accounting.I tried the graphical network management as well as wvdial and even sakis3g (achitecture free variant from URl...).With wvdial (well configured I think) and sakis3g the dial connection is established (permanent blue light on Huawei E169). "netstat -ie" shows that the network configuration has changed (device pp0 instead of eth0 and "netstat -rn" shows that default router is set to 10.64.64.64). But "ping" does not receive data from any internet IP address and browser cannot render any website. A later check call of my prepaid balance said that the daily rate countdown was initiated (so I pay for nothing).
The GUI of the KDE network icon seems to work similar but does not set the usb key into the connected state (only blinking blue light and break-off after a few seconds).Disabling of selinux didn't change anything as well.With Mandriva 2010 I didn't have any problems with same mobile key and provider.
View 4 Replies
View Related
Dec 26, 2009
I have a little bit of a prediciment with my Mobile Broadband dongle, even though I know I'm in a 3G area (Dongle Supports 3G connection) my internet still loads at the normal GPRS speeds max of 5kb/s. Is there anyway to change the speed of it or do I have to keep with GPRS at the moment?
View 2 Replies
View Related
Mar 26, 2010
I am using tata indicom photon+ for mobile broadband internet connection.
Code:
Befor yesterday, I was able to connect via this, but today(i guess a update yesterday is the culprit) i cannot. while it should connect automatically, even usb_modeswitch cannot detect anything.
Quote:
my /etc/modeprobe.conf is also blank. But I can work with wireless
View 5 Replies
View Related
Jan 8, 2010
is it possible to see the router traffic using a remote system? can those packet headers b modified for marking purpose?
View 5 Replies
View Related
Dec 18, 2010
How will I monitor the traffic of tun0 ?
View 5 Replies
View Related
Jan 20, 2011
Is there an easy way to monitor network traffic? I want to make sure my kids are surfing safe...
View 5 Replies
View Related
Sep 27, 2010
what I want to achieve is just to be able to say to who ever is killing our relatively fast connect that they aren't the only person using the network. Everyone just says "I hardly download anything." which is obviously untruthful as normally I can download at 1.5 MB/s but now loading even google.com takes way too long (same with pinging and all other sites). Once I do this, I can determine whether or not I need to call my ISP and do the long 'on hold' dance and "have you tried rebooting the router" BS.
View 8 Replies
View Related
Oct 29, 2009
is there a utility with which I can get the current traffice towards a given host, for example;
command 87.255.33.32
22000
View 1 Replies
View Related
Sep 14, 2010
I am connected to a network with free traffic inside it and post-paid outer traffic. So I need a way to be able to separately monitor the download traffic from inside and outside the network. All the solutions I`ve found for now offer monitoring of ALL up/down traffic.
So, I want to get separate statistics on these:
1 — 81.89.188.0/23, 217.197.9.0/24
2. — 81.89.186.0/23
3. — 81.89.178.0/23
4. — 81.89.176.0/23
5. — 81.89.180.0/24
9. — 217.197.12.0/24
[Code]...
UPD: I`m connected to the internet through the network`s gate, so all the traffic comes through eth0. I wish to separate traffic incoming from the IPs on top from all other traffic
View 9 Replies
View Related
Oct 6, 2010
I am sharing my DSL internet connection using a modem+wireless router (single device) to 5 systems. I want all my internet traffic to go through one of the linux boxes in my network.
The problem here is that wireless devices connect directly to the modem+wireless router.
Is such routing of traffic possible??
PS: I am not sure if i could convey my situation clearly...
View 2 Replies
View Related
Jul 19, 2011
My PC is part of a LAN so while configuring eth0, we specify the Gateway to access all other resources in the network. The PC successfully access Internet through a proxy server configured in Mozilla(manual proxy config) but the update option or the Synaptic Pkg mngr are not able to access internet anyway. I have tried the option "Apply System Wide" in "Network Proxy" but no progress so far.
I also tried to forward all request coming for udp/tcp on port 80 to the proxyserver on a specific port, but with no success. Also I can't ping any website from terminal, reiterating the fact that I can access internet in firefox through the proxy on a specific port.
View 2 Replies
View Related
Mar 4, 2010
My ISP has given me 3 IP addresses to use for the internet (76.148.200.3, 76.148.200.4 and 76.148.200.5).
If I do a "wget whatismyip.com" or netcat into another server, I am appearing as 76.148.200.3.How do I change my route (command line) in linux to route internet traffic through 76.148.200.5?
Code:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
code....
View 9 Replies
View Related
Mar 28, 2010
I have eth0 and tun0. tun0 is a VPN tunnel going over eth0. Everything on the other end is setup and working fine, when I type Code: traceroute 4.2.2.1 I see my the ping is going over 192.168.2.99 (eth0). When I then type Code: route add -net 4.2.2.1 netmask 255.255.255.255 dev tun0 traceroute 4.2.2.1 I see ping is going over 10.8.0.1 (tun0) instead of eth0, so that is working
What does not work however is when I do Code: route add -net 0.0.0.0 netmask 0.0.0.0 dev tun0 traceroute 4.2.2.1 I get no ping! I believe the problem is because all traffic is routing over tun0, which means even the VPN tun0 needs to go through eth0, it can no longer do this. Is there a way around this where I can route everything except for 114.77.31.26 (which is my VPN gateway for tun0)?
View 18 Replies
View Related
Mar 30, 2010
I'd like to allocate a certain quota to my local user for their internet navigation.
View 8 Replies
View Related
Aug 8, 2010
I've just installed Ubuntu 10.04 on a Dell Inspirion 1501 and I can't get the internet to work. I've tried configuring a DSL connection from System> Preferences> Network Connections and It doesn't recognize the password. On Windows it works just fine.
View 3 Replies
View Related
Jun 29, 2010
iam install ubuntu 9.10 i want to connect my bsnl broadband internet
View 3 Replies
View Related
Oct 4, 2010
probably I have screwed myself. I tried to preupgrade to f14 and cancel it after some time. Now, I am facing a problem that I cannot access internet from mobile broadband; but I can access net while i am connected via ethernet or wireless. I have cleared preupgrade files with
Quote:
yum clean all; yum remove @preupgrade
It can detect my HUawei modem and creating an IP as well. But no Internet.
View 7 Replies
View Related
May 24, 2011
I am having broadband connection, I need to connect broadband internet through eth0. Please give me some use full information for configuring this.
View 6 Replies
View Related
Jul 27, 2010
I have a desktop, a laptop, & a wireless router. The router, unfortunately, doesn't support dd-wrt, tomato, etc firmware, but I would still like to prioritize voip/web browsing over bulk Internet traffic. I hope I can offload the router's missing QoS to my desktop.
Is it possible to have the laptop's connection go from the wall to the router to the desktop, where the desktop could perform the QoS of tomato, then continue on to the laptop? I'm a bit of a noob to networking (subnets?) but do well enough following good instructions.
As for the program that would do the QoS... Don't some Linux machines basically work as super-powered routers for businesses? So there must be some package but couldn't find one. The closest I got was wondershaper but it only shapes traffic for the computer on which it's installed; it might form part of the solution but falls short on its own. other devices should be able to access the Internet normally if the desktop is turned off, & work with other devices like a (jailbroken) iPod Touch.
View 1 Replies
View Related
Feb 8, 2011
I have the standard wired LAN NIC and a wireless NIC installed. What my problem is, the wireless NIC will not take any internet traffic. The LAN connection gets it's internet from my LAPTOP with a Clear 4G module. I have a very strong wireless connection, but when I remove the LAPTOP from the network, I get nothing on my Ubuntu computer here, even though I have a solid connection. What is needed in the config to let the wireless run in the "back up" internet connection mode?
View 9 Replies
View Related
Aug 31, 2010
I have some questions about openVPN. I am wanting to hide my downloading through transmission and I'd like to know if I can use openVPN for this? Also do I need access to a server? I don't understand how it all works.
View 5 Replies
View Related
Jun 3, 2010
My internet gateway is 192.168.1.1 with a 255.255.255.0 subnet mask. I have a router connected to it running ddwrt with an ip 192.168.2.1/24 creating a second subnet behind it. I have a tenant moving in that will be wirelessly connecting to the ddwrt router, so to the 192.168.2.0/24 subnet. What I am looking for is a rule that will pass internet traffic to and from this client, but restrict him access from the 192.168.1.0/24 subnet otherwise. The ddwrt router is connected to the 192.168.1.1 gateway through its wan port, btw. For example, the client would get an ip address of 192.168.2.100 wirelessly from the ddwrt router. I want him to be able to surf the internet through the 192.168.1.1 gateway, but not to have any other access to the 192.168.1.0/24 subnet (ideally not have access to ANYTHING besides the internet).
View 4 Replies
View Related