Ubuntu Networking :: Invalid MAC Address Detected?
Nov 26, 2010
I've just installed a fresh copy of Maverick Meerkat 64bit and I wanted to setup static ip, but unfortunately I can't because of invalid mac address detection during each startup. The message looks like this
Code:
dmesg |grep Mac
[ 5.988576] forcedeth 0000:00:07.0: Invalid Mac address detected: 0b:68:66:ea:0f:00
[ 5.988590] forcedeth 0000:00:07.0: Please complain to your hardware vendor. Switching to a random MAC I remember having the same problem on suse distro and the solution I found at that time, was to change the /etc/udev/rules.d/70-persistent-net.rules and edit it to look like this
[Code]...
View 3 Replies
ADVERTISEMENT
Jun 23, 2011
Kubuntu's Network manager says that my (wired) network is in an invalid state because I don't have an IP address, but Firefox and Chorme work perfectly, as do Synaptic and Software Centre, and a Superkaramba network monitor says that my IP is "192.168.1.101" In fact, the only thing that isn't working is Pidgin, and it says it's "Waiting for network connection."
View 3 Replies
View Related
Jul 30, 2011
I'm running Ubuntu 11.04 on a Compaq Presario CQ62, with factory specs. I have downloaded and installed VirtualBox 4.1.0 r73009, and successfully installed Windows XP SP3 and Windows 7. However, I have now hit a problem. When I go to Settings for either virtual machine, I get an error that says "Invalid settings detected". It doesn't matter what I try to change or adjust, this message will not disappear. I do not currently have USB support for the Virtual machines, but it's not a big concern to me at this time. I don't know what commands I need to issue or what information I can offer to get the readout of what's not working right. I am very comfortable using Terminal, but have no idea what to look for or where to go.
View 4 Replies
View Related
Mar 1, 2010
My computer was working fine yesterday. Last night I opted to load the newest ubuntu os ver 9.1. Now all I see after the initial booting takes place is a blank screen. I have managed to look at the booting up sequence and at the end of the multiple lines of code is the message: 'Invalid RT chipset detected'. I do not know if this is significant or not.
View 14 Replies
View Related
Aug 5, 2010
hey dude error in gnu c pointer
I am using Red Hat Enterprise Linux 5.0.
#include <stdio.h>
#include <stdlib.h>
int main()
{
char * cp = NULL;
[Code].....
View 4 Replies
View Related
May 30, 2010
xbmc 9.11 HTPC (confluence skin) on an acer revo 3610 running ubuntu 9.10 can someone possibly help me as I cannot get WOL to work. Went into BIOS under power management and enabled WOL.I have used this guide to set up. HOWTO: Set your system up for Wake On LAN (WOL my ipconfig is
Quote:
xbmc@xbmc-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 90:fb:a6:2c:b2:1f
inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::92fb:a6ff:fe2c:b21f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I then tried to follow this guide HOW-TO set up Wake-On-Lan (Ubuntu) and followed those steps also still nothing. I deleted this script however as it did nothing and didnt want to have two scripts that might be interfering with each other.How can I check that the magic packs are being received by the computer? I think it has something to do with the MAC address but Im a linux noob and gettng kinda lost now, ANY help would be much appreciated. I also have a another linux computer hooked up on the network to test however I want to WOL via the internet incase I am traveling and need to wake up my htpc. Can anyone please help me as I think I have the scrips installed and Im just not doing something simple like configuring the magic packs correctly to send the information.
View 6 Replies
View Related
Feb 23, 2011
I've lost 6 CD-R's to this error. I have no idea what the hell could be wrong. I do not have a SCSI interface in this unit, but no matter, when ever I try to burn a cd it starts and then spits out this error; "SCSI error on write(16,16): [5 21 02] Invalid address" The log from the first attempt to burn that fails. Just before this I had burned a CD and the only problem was it couldn't eject it at the end.
[Code]...
View 1 Replies
View Related
Apr 27, 2011
When I am using Mailutils to send messages to myself as a test, I get them but they are from <"ryandward@ryandward"@gmail.com> which is not a valid email address and I have no idea why my system is configured to send them from this address. This is indicative of some problem there is going on in my system.
View 9 Replies
View Related
Jan 7, 2016
I got the Raspberry pi 2 Model B. I flashed my sdcard with raspberian Jessie kernel 4.1 (latest).Also tried wheezy and NOOBS, same behavior.With a ethernet cable (known working), I tried connecting my Pi to my home router, and I got a invalid ip address 169.254.xxx.xxx, and therefore no linkup. I got the same results by connecting my Pi directly to my modem (wired).
I know that /etc/dhcpd.conf is the new /etc/network/interfaces for network configurations.So I tried the debug option, and I noticed that the router doesn't seems to response to the DISCOVER command from the Pi (dhcp v4 protocol).Here's a dump of by /var/log/syslog | grep dhcp
Code: Select allDec 28 12:00:02 raspberrypi systemd[1]: Starting dhcpcd on all interfaces...
Dec 28 12:00:02 raspberrypi dhcpcd[349]: version 6.7.1 starting
Dec 28 12:00:02 raspberrypi dhcpcd[349]: udev: starting
Dec 28 12:00:02 raspberrypi dhcpcd[349]: dev: loaded udev
Dec 28 12:00:02 raspberrypi dhcpcd[349]: eth0: disabling kernel IPv6 RA support
[code]...
ANd if i use raspbian flesh out of installation, I get this when i run
dhcpcd -k
dhcpcd eth0
eth0: probing for an IPv4ALL address
eth0: using IPv4ALL address 169.154.202.224
Seems like my home router TP-link (default setup) doesn't send a response to the dhcp request.
View 1 Replies
View Related
Feb 28, 2011
I try to setup a HPC cluster with CentOS 5.5. But now there is no Internet connection available in the room where the hardware is located so I set up ntpd server using synchronization with local clock (maybe I do something wrong). Here is my ntp.conf file on a master node (the master node has IP 10.0.1.1, a file server has IP 10.0.1.2 and compute nodes are 10.0.1.3..10.0.1.11, comments are omitted):
Code:
restrict 127.0.0.1
restrict -6 ::1
restrict 10.0.1.1 mask 255.255.255.255 notrust
restrict 10.0.1.0 mask 255.255.255.0 nomodify notrap
code....
Any time I try to install software building it from source when I run make I get a waring "Clock skew detected. Your build may be incomplete". Some software build successfully and run normally after install but some build tasks are failed for example when I try to build RPM's via 'make rpms' for BLCR I get an error message about invalid date in changelog. But the system date seems to be right. I suppose I have invalid settings of NTP.
View 5 Replies
View Related
Mar 8, 2010
I installed the citadel suite on ubuntu server 9.10 Email obviously works fine internally. I tried to setup a smart host to send my mail through as my isp(Verizon) obviously blocks port 25. I tried to send out the Verizon smtp server on port 587. In the Administration> Domain names and Internet mail configuration>Smarthosts.My smarthost entry on the citadel configureation page above was usernameassword@outgoing.verizon.net:587 but after sending an outgoing email, it comes back with a "invalid/host-not-in-DNS return address not allowed"
I have also tried using gmail and a hotmail account with the respective smtp address's in but they come back with "Must issue a STARTTLS command first".I have researched both messages and come up with squat that has helped me.
I know that my mail will have to go out through a smarthost of somekind. So is am I on the right track with choosing verizon/gmail/or something else as my smtp relay, or is there a free service out there that I can send email through(haven't found one if there is)
Anyone else ever setup Citadel and got around their isp blocking port 25?I am also not sold on citadel, it was just the first/ nicest looking one that I found.
View 2 Replies
View Related
Feb 24, 2010
Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
View 5 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Mar 12, 2011
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
View 1 Replies
View Related
May 12, 2011
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
View 1 Replies
View Related
Apr 24, 2010
Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
View 2 Replies
View Related
May 7, 2010
I am running my own Postfix mail server. Some time ago I noticed that most email was rejected because of the server's dynamic IP address. So I got a fixed IP address. However then I noticed that some mails got rejected due to failing the reverse DNS check. So my ISP told me to get a range of IP addresses and they could then create a PTR record for one of those addresses. That is now running but it turns out that the IP address used for the PTR record is a ... dynamic IP address. So Spamhaus PBL rejects my emails again.
View 1 Replies
View Related
Oct 6, 2010
In my job I use some ethernet embedded devices. They take an ip address from dhcp server or auto ip. I only know mac address.How can I obtain ip from mac address? In other words I need a rarp packet generator.
View 6 Replies
View Related
Jun 7, 2009
I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
View 2 Replies
View Related
Oct 28, 2010
I dont know for what reason, since 2 days, I started having this message whenever I try to start httpd.I commented "Listen 443", restarted httpd started correctly. I needed to comment "listen 443" in order to be able to start httpdWhat is strange is when I do
Code:
telnet mylinux 443
it responds
[code]...
View 9 Replies
View Related
May 29, 2011
how to assign a address to my ethernet card all the options available
View 1 Replies
View Related
Sep 20, 2010
I installed Debian 5.03 Lenny successfully on my machine. I got this error during boot: ACPI : invalid PBLK length [5]. After that the Operating System boots properly and starts normally. What does this error statement mean? Is it safe to work with this installation despite this error?
View 1 Replies
View Related
Feb 10, 2011
Trying simply to insert into table. Have succeeded in doing this but now want to correct user use of invalid characters. If I'm understanding correctly, Real-escape-string seems to correct these, so I've been trying to figure out how to use it. A short, test code version gives me a syntax error at INSERT VALUES, which--because it still has the single quotes in the text--tells me the real-escape-string didn't work. The code below gives me a parseing error with invalid $END at </body>.
Insert Error: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ' VALUES (UTC_TIMESTAMP,'What's happen' bra?')' at line 1 Parse error: syntax error, unexpected $end in /home/powere15/public_html/DB/exercises_insert_record.php on line 94
<html><head><title>Exercise Catalog Insert Record</title></head>
<body>
<?
/* Change db and connect values if using online */
[Code]....
View 2 Replies
View Related
Jan 18, 2010
I have a dedicated control computer that can only be accessed with web-browser (with its ip-address). My DHCP-server gives a static ip-address to the control computer (base on its mac-address). Somehow and after some time the control computer looses its ip-address (can't ping to it any more) ... and then I have to reset the control computer to get it to pick up the ip-address ... this is not a good solution since the control computer is not nearby. is there a way to force the control computer to renew its ip-address based on its mac-address
View 1 Replies
View Related
Apr 18, 2011
My security software has picked up multiple port scanning detections on my router/network and only the IP addresses are available. Is it possible to find out what the remote mac address is to see if the IP source has been spoofed? I've got a couple of different IP sources which were found scanning my ports.
I don't know if my IP and the remote IP address are on the same network or subnet for that matter which is the reason for my wanting to know what the mac address is to find out if its coming from the same remote machine.
View 8 Replies
View Related
Jan 5, 2010
I'm running ubuntu 9.04 and trying to pull over some files via the GUI from a XP box over locally. I'm getting this error:"error while copying file into /volcano/tunes invalid argument" (under show more details)If I just copy over a mp3 file it works fine but the when I copy the entire directory I get this error.
View 9 Replies
View Related
Jan 12, 2010
I'm not sure if this is even possible and I've tired searching, but I can't seem to figure it out. I have a few shares setup in Samba. I want them to prompt for a username and password. If an invalid user/pass is entered I want the user to be authenticated as a guest.
View 6 Replies
View Related
Jan 19, 2011
I keep getting this error message:
The VPN connection '<insert name here>' failed because of invalid VPN secrets
I have Ubuntu 10.10 installed on a Dell Latitude D600. It's a fresh brand new install. After I installed all the updates, I proceeded to install network-manager-vpnc. Then, I imported .pcf files so that I can connect to the office VPN,but it gives me the error message above.I have gone to ~/.gnome2/keyrings and renewed everything.Tried moving them away, and then back again. Created a new keyring. Nothing.
View 7 Replies
View Related
Jan 31, 2011
I am trying to connect to a wireless network. I got a problem with network manager. So I try to connect manually
I found wireless network around by using "iwlist scan" command.
I want to connect to a network with ESSID "MCC(Mandalay)" and Key "mdymcctraining"
Here is my problem The output of "iwconfig" command is
Code:
What does it mean "invalid argument"? It means that my wireless pre-sharedkey is not correct? I am sure the key is valid. It is used by any others with window 7.
View 1 Replies
View Related
May 27, 2009
I have an ubuntu 8.04 running samba that's integrated with active directory but not using winbind. Things are working fine except there are lot of entries in the samba logs about:
smbd/sesssetup.c:reply_spnego_kerberos(439)
Username CARBYkentoso$ is invalid on this system
CARBY is the domain name and kentoso is the computer name. I only see this error for the computers and not the users. Other than this, it's working fine. Is there a way to make this error go away? This is the smb.conf file:
[global]
workgroup = CARBY
realm = CARBY.LOC
server string = LION
security = ADS
map to guest = Bad User
obey pam restrictions = Yes
passdb backend = tdbsam
pam password change = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *Entersnews*spassword:* %n
*Retypesnews*spassword:* %n
*passwordsupdatedssuccessfully* .
unix password sync = Yes
client NTLMv2 auth = Yes
client lanman auth = No
syslog = 0
log file = /var/log/samba/log.%m
max log size = 1000
name resolve order = dns hosts lmhosts bcast
printcap name = /etc/printcap
disable spoolss = Yes
preferred master = No
local master = No
domain master = No
ldap ssl = no
usershare allow guests = Yes
panic action = /usr/share/samba/panic-action %d
invalid users = root, nobody
[printers]
LOCment = All Printers
path = /var/spool/samba
create mask = 0700
printable = Yes
browseable = No
[print$]
LOCment = Printer Drivers
path = /var/lib/samba/printers
[SHARE]
LOCment = Samba share
path = /share
valid users = @share
admin users = djoe
read only = No
View 6 Replies
View Related
