I installed ubuntu and i installed it using the install as a program inside windows options but when I boot into ubuntu it does not detect any networks I tried the command sudo pppoeconf it says ethernet card is not there and then it asked me to try modconf and when i try modconf it says that modconf is not installed How can i set internet connection in ubuntu 10.04 I get address assigned by DHCP
View 7 RepliesI have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies View RelatedI'm dual-booting Ubuntu 9.10 (upgraded from 9.04) and Windows 7 on my Dell Inspiron 1525 laptop.Ubuntu doesn't recognize any wireless network (both in 9.04 and 9.10); my Windows OS works perfectly well with wireless, as does my wired Internet connection with Ubuntu and Windows.I've had this problem on previous installations of Ubuntu (I've removed and re-installed it several times) but I can't locate the solution anywhere. I've tried numerous fixes that I've found online, but none of them have worked.System>Administration>Hardware Drivers tells me that the Broadcom STA Wireless driver is activated and currently in use
View 4 Replies View RelatedI've tried every fix i could find. I'm on a Dell Inspiron 1420 running Ubuntu 10.10 lucid lynx using a BCM4312 LP-PHYi've tried everything to get my wireless networks to connect but nothing works. I finally got my computer to recognize my wireless card but it doesn't detect or connect to networks. Before i was able to at least see the networks but not connect or stay connected once i disconnected the ethernet cable. i will post the output of ifconfig, iwconfig, iwlist scan
View 3 Replies View RelatedI've used this computer to connect to a wireless router before. I recently moved and for some reason it isn't working.I have a too long of an lspci output to type (I'm on a different computer).
View 1 Replies View RelatedNo wireless upon re-installation of 9.10 Drivers seem installed. No wireless networks detected. code...
View 6 Replies View Relatedi installed backtrack recently....and wireless networks are not detected.... which deb to install because it is based on ubuntu 8.10
View 1 Replies View RelatedI have a msi netbook with ubuntu netbook remix installed and it was working great until yesterday when suddenly it stopped detecting my home network. There are no problems on my two other machines, so I'm sure the problem is the netbook. I have no idea how to go about troubleshooting this. I was hoping someone could help me by giving me a place to start.
View 2 Replies View RelatedI have ubuntu 11.04 installed. I have a D-link USB Wireless Adapter. Ubuntu detected it and it worked fine. I have a Beetel 450TC1 Router which broadcasts my internet connection. Ubuntu recognizes it, and keeps on trying to connect.It asks me for Authentication again and again.( Don't tell me to check the password again, it does work on everything else )And its not the router problem also, as I tried broadcasting through a laptop I have, Ubuntu again detected but couldn't connect and kept asking me for Authentication
View 2 Replies View RelatedNo wireless networks detected with AR5001 chipset
View 1 Replies View RelatedNew Ubuntu user here, and I'm having difficulties connecting to my router at home. I've searched around the forum for a couple of hours now, to no avail. My router was originally not broadcasting ssid, so I turned broadcasting on. Now I can see the router, but when I enter a password (which I know is correct) nothing gets connected.
View 9 Replies View RelatedI'm running ubuntu 9.10 on my desktop.Wireless networks appear on the dropdown menu but when I try to connect to my home network the authentication box appears, after typing my password the box disappears and it continues to connect but nothing happens and after a while the authentication box appears again. So.. no internetz connected.
View 7 Replies View RelatedI am running debian testing dist-upgraded to sid with the latest gnome-shell. All is fine, I have recently moved to a new house and noticed that network manager wont detect my home wireless network. It does scan for networks and locates SSIDS from other local networks including my neighbours wifi where I can connect but will not detect mine. The modem router used is a zte quite popular in Greece and I have the broadcom wl driver installed. By the way since it is a dual boot machine - nasty win7 connect just fine and so does my mobile phone...
View 3 Replies View RelatedI am trying to configure my android phone (rooted Eris running kaossfroyo 2.2) to be used as a midi controller. Which I am having enough trouble with as it is but it has raised an annoying issue that occurred a month ago when I used the phones tethering network with my laptop. After connecting the laptop to the phones network (either tether, or an Ad-hoc network created using the network manager) I am unable to switch to other networks. In other words when I'm done with the phone-laptop connection I cannot connect my laptop to my home network! When I click on the other network connection I can see that it is attempting to connect in the upper right corner of the desktop (the network icon) but it will not make the connection.
What happens is that the network indicator will make the little circle graphic as if it is trying to connect but it never will display the other circle as green indicating that it has connected. but when I disconnect from the home network that is not connecting I will get a message underneath that will say that ad-hoc network disconnected! If I am switching from the android tether it will say Android-Tether disconnected etc. Even though when I click on network manager it shows that I am attempting to connect to the home network (labeled LIBERTY in my case) upon disconnection it shows the ad-hoc or tether connection being disconnected.
I am absolutely baffled by this! The issue persists even after deleting the ad-hoc connection from the wireless settings tab!!! I would speculate that for some reason the laptop is attempting to connect to the previous ad-hoc connection despite me wanting it to connect to LIBERTY. I am very confused and hope someone can lead me in the right direction.
My wireless network is being detected but it refuses to connect to it. I am entering the accurate passcode and I have tried doing various commands for it to work, but it is being stubborn.
Also, it would help to know which WEP Index to use and type of Authentication.
I am running -current on an ASUS eeePC 1000HE. Wireless was working fine up until the time I applied the latest changes from the Slack -current tree, which upgraded wpa_supplicant. Now, no networks are detected.
I looked at some related threads here and did some basic checking: neither the eth1 nor wlan0 interfaces show up in iwconfig or ifconfig output. Am afraid I am still a wireless dunderhead and don't know where to start troubleshooting this issue.
I could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
I have configured a wireless pcmcia card using ndiswrapper. I'm sure that works, as with the command "iwlist wlan0 scan" gives me back
the list of detected wireless networks. At this point I was wondering: is there a way to detect the new interface (wlan0) with network manager? Even after enabling the wifi card the network manager gnome applet always finds only eth0.
What i need to do is setup a gateway with 2 red networks, reason being 1 is my internet connection and the other is my bDSL connection for our IP phone system and i need an IP range of traffic routed to the bDSL rather than internet, i can do this on individual PC's but id like to do it at the firewall level so i dont have to configure each machine on the network.
basically i want all traffic to go to internet except for say 203.x.x.x which i want routed to the bDSL router and let it handle it. Ive dome some reading and it seems ipcop and smoothwall cant do it so i was hoping with some tricky work maybe i can get ubuntu to do it for me.
I just bought a new toshiba c655 laptop and had windows 7 on it. i made the dual boot partition on it, yada yada yada, anyway, on the windows partition i can see two networks at my house. one is mine, one is my neighbors. but when i go to the ubuntu side of things not a single wifi network shows up. i did a little combing of the forums and decided to try installing the ndisgtk package which i obviously need internet for. i thought i would plug it into an ethernet cable running straight from the modom and i could connect and download no problem. however. this has turned out to be quite a mistake. ubuntu does not even recognize the fact i have an ethernet cable plugged in. this may or may not be related, but niether my ipod or my cell phone does not show up when i plug those in and when i try to mount them i get an error message that says they could not be found. Im running 10.04.
View 2 Replies View Relatedi have an acer aspire 7551, and trying to setup wireless. The WI-FI indicator is turned off. Here is the basic output that i get:
Code:
ubuntu@ubuntu:~/Desktop$ sudo lshw -C network
*-network
[code]....
I have an hp dm1z and ubuntu 10.10 64bit. After I suspend (close the lid) and wake it up (open the lid) at a different location with a network connection (wired or wireless), my system always fails to connect. I need to reboot and then it sees the network and connects fine. I have tried /etc/inet.d/networking restart, but nothing changes. The only exception to this rule are two networks that have WPA security settings and are stored. I can always switch between those two. I have tried ifconfig eth0 up & down and restart networking. I have also tried to connect manually (dhclient) and no success. None of these work. I am including the output of lshw -C network.
lshw -C network:
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
[code]....
I have an MSI Wind U100 netbook running Maverick, and it has a Realtek RTL8187SE Wireless controller according to lshw. My computer can "see" some wireless networks where they are present, meaning when I click on the little network icon at the top of my screen it shows the available networks. But when I click on them to connect, the icon does its little "connecting" motion, but I never receive any message saying "Connected" and when I open Firefox and try to browse to google.com, it says "Server not found"
View 8 Replies View RelatedI have an ethernet card connected to my LAN and a USB cell modem internet connection. I am running ubuntu 10.10. The problem is this: I can use either network, but only am connected to one of them. If I connect to both at the same time my speed drops to zero.f I disconnect one, the other starts working. I have done a lot of searching and reading, but it looks like I don't know how to find what I am looking for.My LAN was setup as 3 WinXP computers peer to peer. One of those computers was replaced by this one that I am having trouble with (computer A). Another one was replaced by one that is not yet on the network (computer C).Computer B dual boots Win XP and ubuntu 10.4. Mostly it ns xp for Quickbooks and BobCAD, also it is connected to the printer. My router is setup for DHCP
View 2 Replies View RelatedI have Ubuntu 9.10 on VirtualBox.How can i view my wireless networks via 2 ways ?
1)via Terminal(Shell)
2)via a suitable apps in GUI.
I am using a Toshiba Laptop model P205D-S7802 with an atheros wireless card. Since I upgraded to 10.04 I am unable to connect to the internet unless I use an ethernet cable. I have been surfing the threads for a fix and have tried what has been posted but to no avail.
HTML Code:
eth0 Link encap:Ethernet HWaddr 00:1b:38:b6:cb:98
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21b:38ff:feb6:cb98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I can normally connect to most wifi connections, but for some reason I can't connect to my broth's-gf-parent's network. Windows 7 can connect to it just fine, but not Ubuntu. Once in a while I'll go to a cafe, and this will happen there too.hough, like I said I can normally connect to all other wifi networks with no hassle
View 1 Replies View RelatedI'm running Ubuntu 10.04 64bit on a Thinkpad T61, and I keep running into some issues with the wireless networks. For a while, the connection works fine (sometimes several hours, sometimes 15 minutes or so--there doesn't appear to be an event associated with it). Eventually, though, the connection disappears; first, though the widgets say I'm connected, nothing will go through, and soon after, it realizes I'm not connected and, moreover, it can't find a single wireless network, despite the fact that it was just fine a couple of minutes beforehand (and other devices still have access to the WLAN, so I know that the router hasn't crapped out). I've tried using wicd, but the same thing happens.
View 2 Replies View RelatedI am quite new to Ubuntu, so please give me easy to follow steps.So, I have just installed Ubuntu 10.10 x64, but cant get my wireless to work. It detects my networks and tries to connect to them - infinitely, whithout success.I have tried it on an unprotected and on a WPA2-personal protected network with the same results.My card is a RaLink rt3090.
View 7 Replies View RelatedI have a pretty beat-up laptop, on which the inbuilt wireless doesn't work, and so I now have an ASUS WL-167g, which is acting up!It almost always connects to the required networks without an issue, but then once I'm connected it's REALLY slow on some of them! For example, while I'm at school, it works flawlessly! And at a couple of friends' houses, it works too! however, at home, and at a couple of other places, despite the fact that it connects, its so slow, that google takes like 5 mins to load and searching for anything on google leads it to time out!! This happens whether I'm right next to the router (full signal strength) or 2 floors up (at like 3 bars strength)!
It's getting pretty frustrating to have to swap my lan cable between my desktop and laptop constantly, and also to not be able to use my laptop away from my desk!Does anyone know what might be going on??Also, while i have you guys here! I have another problem -- with the inbuilt card.. Initially, it wouldn't work at all.. but more recently, it has started to function (it connects and works on my home network fine) the only problem is that about 10 mins after I turn the wireless switch on on my laptop, it hangs! (EVERYTIME) (if it's relevant, my laptop is a SONY VAIO VGN-S46GP). Again, any input would be appreciated!!