Ubuntu Networking :: HP Mini 1116nr 'No Network Devices Available'
Aug 12, 2010I'm running Ubuntu 10.04 on a HP Mini 1116nr as expected i have no Wireless access but i also seem to have no wired access either.
View 2 Replies
ADVERTISEMENT
Ubuntu Networking :: Wireless Home Network Is Not Recognized By Network Card (RealTek RTL8190 Mini PCI)
Jul 12, 2010my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
Ubuntu Networking :: Connecting To Network In Netbook Version On Hp Mini?
Jun 22, 2010I decided to try ubuntu on my netbook and it seems to have set up well other than I cannot see any wireless connections. I can't click on connection information. The blue light is on, indicating that my netbook's network card is on.
is there another version that would work better with an hp mini? Otherwise the netbook is rather pointless
Ubuntu Networking :: Freeze On Network Cable Plugging-in HP Mini 5101?
May 2, 2011Since I upgraded to Ubuntu 11.04 my system freezes when I plugging-in an ethernet cable.My network devices:
Code:
#sudo lshw -C network
*-network
[code]....
Fedora Networking :: HP Mini 2140 Wired Network Won't Work
Jun 20, 2011i dosent get the wired network in my HP mini 2140 to work. It had worked before but today it stoped. I think it's the network card that is the problem. im running fedora 15.
View 4 Replies View RelatedUbuntu Networking :: No Network Devices Available?
Nov 17, 2010I'm looking for some help on how to troubleshoot the network on Ubuntu 10.04 64 Desktop. It's on a Acer Aspire 721. There's a wireless card but the widget in the top right says there is no network device.
View 2 Replies View RelatedUbuntu Networking :: No Network Devices Available 10.04.2
Jun 6, 2011Just built a box and once 10.04.2 64 bit was all installed and loaded up I realized instead of showing my Ethernet as connected it had the ol x. So when I clicked on it I got "No network devices available." The mainboard is an Asrock 890GX Pro3, link light completely out.
View 1 Replies View RelatedUbuntu Networking :: Boot Computer And Network Manager Shos "no Network Devices Available"?
May 10, 2010Loaded Ubuntu 10.4lucid on TransPort NX Mobile Pentium II, 328MiB,Using Netgear Rangemax wn511b. with Broadcom STA wirless driver. bcm43gx.Boot computer and network manager shos "no network devices available" Run system/administration/hardware drivers and the Broadcom STA driver shows up (only one that shows up) REMOVE and then ACTIVATE and the network manager sees it and connects fine. Shut down computer, restart and no device. I am forced to Remove and Activate each time I start the computer.Is there a way to set this driver to be found and run at computer start.
View 4 Replies View RelatedUbuntu Networking :: Multiple Devices On Single Network
Jan 14, 2010I've got a co-worker who is trying to connect multiple devices to his wireless router - Xbox, Wii, TV, Dishnetwork box, etc. Not all of the devices are wireless however. He's had several thoughts on how to get this done and I know very little about this kind of thing so I thought I'd ask some of you.
His first thought was to buy a multi port bridge, but he doesn't like any of the ones he's seen so far.The other thought was to connect all of the devices to a switch and then use a single bridge, but he isn't sure if this would work.
Ubuntu :: Mapping Network Devices Like Windows Networking?
Jan 9, 2010I am running Ubuntu 9.10 and Windows 7 (Wubi). Windows Networking shows all devices on the network (computers, routers, etc). Is there a way to get Ubuntu to do this (Would prefer GUI)?
View 3 Replies View RelatedNetworking :: Fedora 15 Naming Network Devices
Jun 23, 2011I'm doing a few tests with fedora 15. I'm surprised because they changed the naming way on network devices. eth0 is now called em1.At every fedora I have found the configuration files in /etc/sysconfig/network-scripts, but today I can't find them.
View 1 Replies View RelatedCentOS 5 Networking :: Error - No Network Devices Available - 5.3
May 6, 2009Right now I have this error
On my top right hand corner. No network devices available.
My distro is Centos 5.3
Ubuntu Networking :: Server Doesn't Find My Other Network Devices
Jun 30, 2010I've got three network devices on a laptop:
1. Built-in ethernet LAN
2. Built-in ethernet WLAN
3. PCMCIA ethernet LAN
I installed Ubuntu Server on this computer without the last one inserted.I inserted the last one today, and it lights up when i put in the cable. To be sure if Ubuntu has found it, I tested with the install CD and could see that it found all three at the first part of the installation where I have to chose a primary device.I can't get my WLAN card working, neither do I get my PCMCIA LAN card working. The third card, this PCMCIA card, has worked on Ubuntu Desktop using another laptop. And as said, the setup finds all three.
Ubuntu Networking :: Network Manager No Longer Seeing Devices After Reboot
Dec 5, 2010I just loaded 10.10 on an Acer Aspire One D255. When I installed Ubuntu, network manager loaded and I was able to use both the wired and wireless cards. After I used update manager, the kernel was upgraded, and I also added some wireless applications (RutilT WLAN Manager, SWScanner, and WiFi Radar). Upon reboot, the network manager doesn't work, and it cannot find any of the devices.
View 9 Replies View RelatedFedora Networking :: App That Continually Checks For Devices On Network
Dec 4, 2010Does anyone know of an application that continually scans for devices on a network and notifies you if a device connects/disconnects to/from the network? I just want a way of knowing when a computer is connected and when it's not.
View 10 Replies View RelatedNetworking :: Identifying Network Devices At Boot Time?
Dec 23, 2008I boot linux off a USB stick on many different computers with different hardware. How can I determine in a script which devices eth0, eth1, wlan0 exist and which hardware devices they apply too? Sometimes a wireless card is wlan0, other times it is eth1 or even eth3! The proc/net/dev file does not inidicate which hardware is installed.
View 2 Replies View RelatedNetworking :: Two Network Devices For Increased Transfer Rate?
Jan 28, 2011I have not tried this, and I am only wondering about the result.Let's say that I have a PC/Laptop with two network devices: an ethernet and a wireless. Can I connect both of the to the same network (if this network allows both connection) to increase the transfer rate between the PC/Laptop and the server???
View 5 Replies View RelatedCentOS 5 Networking :: After Install Cant Surf The Net - No Devices For Network
Sep 12, 2010I installl centos in my pc after i install, i cant surf the net,showing no devices for network
View 1 Replies View RelatedUbuntu Networking :: Enabling Wifi In Laptop For Other Devices When Connected To Wired Network
Jul 14, 2010This may be more suited for the networking forums, but I figured Community Cafe would be well rounded enough for someone to tell me if this is even possible (with minimal configuration that is).There are a few places I travel where I only have a wired connection to the Internet (no wifi), but when this happens is there a simple way to create an adhoc network so wireless devices can route through my computer and to the network? Reason I'm asking is I'm thinking of getting an iPad or iPod Touch which have wireless connections, but in the cases where my laptop is using a wired ethernet connection and the wireless card isn't used, I'd like to create an adhoc wireless network that'll let such wireless devices work.
View 4 Replies View RelatedFedora Networking :: FC10 - Wifi Devices To Work On 128bit WEP Network - Linksys Wireless-G And 5100AGN
Jun 20, 2009I'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
Ubuntu Networking :: Can See All Devices On Local Network And Their Local Ip Addresses
May 16, 2010I'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
View 6 Replies View RelatedOpenSUSE Network :: Can't See Any Of Devices Showing Up In Network Manager
Feb 2, 2010I can't see any of my devices showing up in network manager to configure even though they're using dhcp and working. How do I get them in so I can configure a proxy?
View 3 Replies View RelatedOpenSUSE Network :: No Network Devices Recognized On New Install
Feb 24, 2011Just installed 11.3 kde. When running the live cd both wireless and ethernet devices appeared in the network connections manager utility. I even connected to a wireless AP.I just booted up for the first time and none of these devices are available. There is no network manager icon in the system tray, and when the network manager utility is maually opened the only connection type i can select is vpn.I know that opensuse should be able to recognize these devices since they were available and working via the live cd, so can anyone help me restore them?
One extra piece of info, is that I am sharing a home directory with a gnome ubuntu install. there were a few minor issues i dealt with initially, but i didnt need to change this user's UID like I have had to do in the past so that's good. Each time i open a terminal I get two pieces of output assuming from the bash startup saying something like.URL...I highly doubt that these problems are related, but figured I'd post. Also if someone knows the solution to that as well, that would save me a bit of googling.
Ubuntu Installation :: Mini.iso Network - Auto Configuration Always Fails
Jul 12, 2010I've got this old IBM thinkpad which has 128mb of ram, and I'm trying to configure a small mini.iso minimized ubuntu distro set up on it. From here: [URL] During the instillation, it requires that I connect to the internet to install and choose packages, the problem is the auto configuration always fails. I plugged in via Ethernet, but I'm still not exactly sure how to get it working.
View 4 Replies View RelatedOpenSUSE Network :: Can't Get WLAN Up On Dell Mini 10v?
Jul 25, 2010I can't get WLAN up on my Dell Mini 10v (BCM 4312)/openSUSE 11.3/LXDE. And yes, I have thoroughly read iwfingers's 'Getting your Wireless to Work'. After installing openSUSE 11.3 ifconfig can see eth0, l0 and wlan0. No WLAN running. dsmesq|grep firmware prompts me to '/usr/sbin/install_bcm43xx_firmware"
After having done that and reboot ifconfig can only see eth0 and l0. Installing broadcom-wl-5.60.48.36-7.pm.16.4.i586.rpm broadcom-wl-kmp-default-5.60.48.36_k2.6.34.0_12-7.pm.16.4.i586.rpm (current ones from Packman) does, Shall I try to install the drivers without installing the firmware first?
Why does broadcom-wl-kmp-default-5.60.48.36_k2.6.34.0_12-7.pm.16.4.i586.rpm install a new default kernel? Ubuntu Netbook Remix 9.04 had no problems with WLAN.
Ubuntu Installation :: Minimal Install - Mini.iso - No Network Interfaces Detected?
May 9, 2010Trying a minimal install with the mini.iso. I don't have a wired internet connection, only wireless from my iPhone which works fine with my full install of Ubuntu. The installer is not able to find my wireless connection stating "No Network Interfaces Detected". I did try to install yesterday in town with a friends wired internet connection and I got the same result. I'm able to get to the command line in the installer but have no idea how to start my wireless connection so the install can continue. I have searched here, and elsewhere on the net to the point of giving up.
View 7 Replies View RelatedGeneral :: Restarting Network Devices Remotely?
Oct 4, 2010I have a machine with several IP addresses with eth devices like eth0, eth0:1, eth0:2, eth0:3. Can I restart only eth0 without bringing down eth0:1? It would be really convenient to be able to log in via SSH on eth0:1 and restart eth0 without locking myself out or not being able to bring the network back up.
If I stop eth0, will that automatically stop all the others?
Fedora Hardware :: No Network Devices Found
Aug 14, 2010i'm quite new to Fedora, altough i'm now installing it on my second computer, a desktop pc,it is old (4 years or so), and has an ASUS M2N-SLI DELUXE URL... which worked fine under windows XP and had no problems.Now, after i've installed Fedora 13, i've found out that it isn't recognized, i'm unable to connect to internet, or to any other device, because under the network management window there are no network devices to select.
View 4 Replies View RelatedFedora :: Configure Network Devices And Connections
Dec 4, 2010Does anyone know where the System->Administration -> <Network Configuration> has been placed in F14? Can only find the System -> Preferences -> Network Connections, but here you have no checkbox to activate a device (although even so discribed in the HELP).
View 2 Replies View RelatedOpenSUSE Network :: Accessing Snmp Devices Through Nat?
Jan 12, 2010I've problem to access snmp devices through nat.Some devices I can access others not ...All are the same devices...What I see that I have problems it the device has logical interfaces and I want access with snmp to the logical interface...
View 2 Replies View Related