I am running Ubuntu 9.10 and Windows 7 (Wubi). Windows Networking shows all devices on the network (computers, routers, etc). Is there a way to get Ubuntu to do this (Would prefer GUI)?
View 3 Replieshave a workstation, that, even after a fresh reboot, has a constant network activity.I used Wireshark on the machine, and i saw there is a constant HTTP trafic(even after a fresh reboot).I just know that my local TCP/44188 port is used to send the HTTP trafic to the web server on Internet.However; I don't know which process is doing that.How can I identify the binary responsible for using this particular TCP port and sending data?
View 2 Replies View RelatedIn my university linux lab I have access to a linux network drive where I save programming code.I have ubuntu as a guest in virtualbox on my xp computer in my dorm. How can I map the linux network drive to ubuntu for use in virtualbox? I already have it mapped in windows, but can't get it mapped in ubuntu / virtualbox
View 1 Replies View RelatedI'm have a server running linux ver: Linux version 2.4.22-1.2115.nptl (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #1 Wed Oct 29 15:42:51 EST 2003
from my windows xp machine I can see that there are three shared folders using : 1- run then \10.1.2.4 I can map tow of these folders to a network drive using the root credentials. but when I tried to map the third one (it was mapped before) I got the following errors: first asking to insert the password again [URL]
then: asking to put the password but as a gust [URL]
I'st just installed 10.10 on Virtual Box. I'm trying to map some windows drives (On the host) permanently. Using Places->Connect To Server etc I can connect to my windows box no problem and see the directories etc in Nautilus (2.32.0) all ok.But rebooting the system results in my having to log in again - I've looked atis that the only what to get this to work permanently?Also, and more importantly K-Develop (And possibly others) can't see this mapped drive when I want to open a file from it? What would be the problem here?
View 4 Replies View Relatedfinding / mapping network shares on Win 7 guest in vmware. I am running 10.10 64 bit ubuntu and installed vmware workstation 7 (64 bit version). I created and installed win 7 (ultimate) vm. everything is good so far. The issue is I have a second desktop with ubuntu and I have shared 4 drives on that desktop. I want those shared available to the win 7 guest. And even after enabling the shared folders I do not see them.
Note: I have a shared folder on the same machine where I have vmware installed and win7 has assess to that drive.. its just that the shares on network are not available. Note2: i had virtualbox installed and it worked fine.
Have been configuring fedora 14 to connect to a windows domain server and have been successful so far....am now on mapping network drives when the user logs in via the gnome gui.
If there is a better method of mapping network drives on login
After reading up on PAM_MOUNT and using that for mapping drives on login I have been able to successfully map them, but it doesn't do this automatically on gnome login.
Problem is as follows: It works when i connect / login using the terminal but requires me to enter the password once (even when i logged into the user account on gnome).
How I want it to work:I would like the mapping to occur when i login via gnome so that i dont have to open a terminal once logged in to gnome to map the network drives. I would like it to login without having to type the password again as the user is already logged in
Config Files:
#--- ~/.pam_mount.conf.xml ---#
<?xml version="1.0" encoding="utf-8" ?>
<pam_mount>
<volume fstype="cifs" server="GRA.GI" path="apps" mountpoint="/mnt/GRA.GI/apps"/>
</pam_mount>
[Code].....
I'm looking for some help on how to troubleshoot the network on Ubuntu 10.04 64 Desktop. It's on a Acer Aspire 721. There's a wireless card but the widget in the top right says there is no network device.
View 2 Replies View RelatedJust built a box and once 10.04.2 64 bit was all installed and loaded up I realized instead of showing my Ethernet as connected it had the ol x. So when I clicked on it I got "No network devices available." The mainboard is an Asrock 890GX Pro3, link light completely out.
View 1 Replies View RelatedLoaded Ubuntu 10.4lucid on TransPort NX Mobile Pentium II, 328MiB,Using Netgear Rangemax wn511b. with Broadcom STA wirless driver. bcm43gx.Boot computer and network manager shos "no network devices available" Run system/administration/hardware drivers and the Broadcom STA driver shows up (only one that shows up) REMOVE and then ACTIVATE and the network manager sees it and connects fine. Shut down computer, restart and no device. I am forced to Remove and Activate each time I start the computer.Is there a way to set this driver to be found and run at computer start.
View 4 Replies View RelatedI've got a co-worker who is trying to connect multiple devices to his wireless router - Xbox, Wii, TV, Dishnetwork box, etc. Not all of the devices are wireless however. He's had several thoughts on how to get this done and I know very little about this kind of thing so I thought I'd ask some of you.
His first thought was to buy a multi port bridge, but he doesn't like any of the ones he's seen so far.The other thought was to connect all of the devices to a switch and then use a single bridge, but he isn't sure if this would work.
I'm running Ubuntu 10.04 on a HP Mini 1116nr as expected i have no Wireless access but i also seem to have no wired access either.
View 2 Replies View RelatedI'm doing a few tests with fedora 15. I'm surprised because they changed the naming way on network devices. eth0 is now called em1.At every fedora I have found the configuration files in /etc/sysconfig/network-scripts, but today I can't find them.
View 1 Replies View RelatedRight now I have this error
On my top right hand corner. No network devices available.
My distro is Centos 5.3
I've got three network devices on a laptop:
1. Built-in ethernet LAN
2. Built-in ethernet WLAN
3. PCMCIA ethernet LAN
I installed Ubuntu Server on this computer without the last one inserted.I inserted the last one today, and it lights up when i put in the cable. To be sure if Ubuntu has found it, I tested with the install CD and could see that it found all three at the first part of the installation where I have to chose a primary device.I can't get my WLAN card working, neither do I get my PCMCIA LAN card working. The third card, this PCMCIA card, has worked on Ubuntu Desktop using another laptop. And as said, the setup finds all three.
I just loaded 10.10 on an Acer Aspire One D255. When I installed Ubuntu, network manager loaded and I was able to use both the wired and wireless cards. After I used update manager, the kernel was upgraded, and I also added some wireless applications (RutilT WLAN Manager, SWScanner, and WiFi Radar). Upon reboot, the network manager doesn't work, and it cannot find any of the devices.
View 9 Replies View RelatedDoes anyone know of an application that continually scans for devices on a network and notifies you if a device connects/disconnects to/from the network? I just want a way of knowing when a computer is connected and when it's not.
View 10 Replies View RelatedI boot linux off a USB stick on many different computers with different hardware. How can I determine in a script which devices eth0, eth1, wlan0 exist and which hardware devices they apply too? Sometimes a wireless card is wlan0, other times it is eth1 or even eth3! The proc/net/dev file does not inidicate which hardware is installed.
View 2 Replies View RelatedI have not tried this, and I am only wondering about the result.Let's say that I have a PC/Laptop with two network devices: an ethernet and a wireless. Can I connect both of the to the same network (if this network allows both connection) to increase the transfer rate between the PC/Laptop and the server???
View 5 Replies View RelatedI installl centos in my pc after i install, i cant surf the net,showing no devices for network
View 1 Replies View RelatedSamba up and running on my pc. pc runs FC12 with kde. A laptop has win vista. The pc can access the shares on the laptop but the laptop has authentication issues to access the pc. Note that windows doesnt enforce authentication forincoming network connections.Using the system-config-samba util i tried to map a windows user to the unix user "feduser". The laptop (named LAPPY) has a user (lapuser) which has on windows no password.What should I tell samba config what the windows username should be? lapuser or LAPPYlapuser doesnt work because when accessing the pc via the laptop, the authentication fails. The only auth that is successful is when choosing the same winusername as the unix username.
Secondary, id like to setup the laptop so that the user doesnt have to provide a name and password, or at least not more then once in the lifetime of the laptop. Note that you cant provide an empty password to system-config-samba. How is that possible?
Strange but not really on issue imho:the samba - KDE control module(kcmshall4) (and the smb.conf) shows 2 shares: the homedirs and the data dir the samba server configurator (system-config-samba) shows only the datadir.
This may be more suited for the networking forums, but I figured Community Cafe would be well rounded enough for someone to tell me if this is even possible (with minimal configuration that is).There are a few places I travel where I only have a wired connection to the Internet (no wifi), but when this happens is there a simple way to create an adhoc network so wireless devices can route through my computer and to the network? Reason I'm asking is I'm thinking of getting an iPad or iPod Touch which have wireless connections, but in the cases where my laptop is using a wired ethernet connection and the wireless card isn't used, I'd like to create an adhoc wireless network that'll let such wireless devices work.
View 4 Replies View RelatedI'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
I've found that simply sharing a folder on my Ubuntu PC with other Linux PC's on my network proves unwieldy from an 'ownership' standpoint. For example, if I create a file from my Ubuntu Laptop and save it onto my Ubuntu Desktop 'share', I find that if I try to access it from the Desktop that the group/ownership prevents my access so I end up having to chown it. I'm finding sharing in a mixed environment to be a pain.
So, I recently configured an old desktop box with FreeNAS and I want to move all of my files from my main Ubuntu PC over to it, and have those files accessible from various clients (both Windoze and Linux) from thoughout my network. Now I've got the FreeNAS all set up and shared, and I'm ready to transfer files to it. What's the best way to mount Mr. FreeNAS on my various desktops and laptops such that sharing is not a problem from a security (group/owner) standpoint? Should I be using CIFS/SAMBA or is NFS mounting better? Will there be sharing problems or ownership issues when accessing from Windows?
Code:
HP Mini 210
Fedora 14 xfce
2.6.35.6-48.fc14.x86_64 #1 SMP Fri Oct 22 15:36:08 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
Currently when I press the windows key nothing happens. However, I can get some events from this key. xev displays the following event information:
Code:
KeyPress event, serial 31, synthetic NO, window 0x3800001,
root 0xaa, subw 0x0, time 1744572, (161,180), root:(584,386),
tate 0x0, keycode 133 (keysym 0xffeb, Super_L), same_screen YES,
[code]....
how I can map a drive/directory on a remote Centos 5.3 server in my office to my local Windows XP at home. Is there any guides on how this could be done? eg. VPN, SAMBA, NFS, etc..
View 2 Replies View RelatedIs it possible to make the Windows key on a keyboard actually do something in Linux? Like pop up the KDE menu or something?
View 1 Replies View RelatedI'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
View 6 Replies View RelatedI use opensuse 11.4 with TightVNC Server version 1.3.9. I use french keyboard mapping (yast configuration).When I connect with putty via ssh all is ok (keyboard mapping). But when I use tightvnc viewer on windows the mapping is not correct.I've verified many time the configuration of the keyboard in yast (graphical) and desktop options (french mapping). I can't map correctly. It seem there is no issue with direct attached keyboard.Another strange behavior is the shift key. I want to use . (need to press shift + and this put a >. But sometime if I press "shift + ," before then "shift + ;" it works.
I've passed long time on google and find no answer yet.Is there a issue with tightvnc server ?A bug with tightvnc viewer ? (I've tried with realvnc and same results).
in my windows7 laptop, I installed a virtualbox 4.0 then Fedora 14 as OS. Can I transfer the files from Linux system to windows syatem? I mean can I create a relationship between two OS like mapping network drive?
View 3 Replies View Related