I'm doing a few tests with fedora 15. I'm surprised because they changed the naming way on network devices. eth0 is now called em1.At every fedora I have found the configuration files in /etc/sysconfig/network-scripts, but today I can't find them.
View 1 Replies
Need help on how the scsi and multipathing works in Linux. From the docs i have read, i understand that by the use of multipathing we can assign multiple paths to a SAN partition. If there is a problem then one path will failover to other path.However, i am not clear on how linux recognizes the SAN partitions using the multipath drivers. For e.g. I have a HP Proliant server on which we have the following mounts:
Filesystem Size Used Avail Use% Mounted on
/dev/cciss/c0d0p3 59G 11G 46G 20% /
/dev/cciss/c0d0p1 494M 27M 443M 6% /boot
[code]...
Does anyone know of an application that continually scans for devices on a network and notifies you if a device connects/disconnects to/from the network? I just want a way of knowing when a computer is connected and when it's not.
View 10 Replies View RelatedI'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
I'm looking for some help on how to troubleshoot the network on Ubuntu 10.04 64 Desktop. It's on a Acer Aspire 721. There's a wireless card but the widget in the top right says there is no network device.
View 2 Replies View RelatedJust built a box and once 10.04.2 64 bit was all installed and loaded up I realized instead of showing my Ethernet as connected it had the ol x. So when I clicked on it I got "No network devices available." The mainboard is an Asrock 890GX Pro3, link light completely out.
View 1 Replies View RelatedRight now I have this error
On my top right hand corner. No network devices available.
My distro is Centos 5.3
Loaded Ubuntu 10.4lucid on TransPort NX Mobile Pentium II, 328MiB,Using Netgear Rangemax wn511b. with Broadcom STA wirless driver. bcm43gx.Boot computer and network manager shos "no network devices available" Run system/administration/hardware drivers and the Broadcom STA driver shows up (only one that shows up) REMOVE and then ACTIVATE and the network manager sees it and connects fine. Shut down computer, restart and no device. I am forced to Remove and Activate each time I start the computer.Is there a way to set this driver to be found and run at computer start.
View 4 Replies View RelatedI've got a co-worker who is trying to connect multiple devices to his wireless router - Xbox, Wii, TV, Dishnetwork box, etc. Not all of the devices are wireless however. He's had several thoughts on how to get this done and I know very little about this kind of thing so I thought I'd ask some of you.
His first thought was to buy a multi port bridge, but he doesn't like any of the ones he's seen so far.The other thought was to connect all of the devices to a switch and then use a single bridge, but he isn't sure if this would work.
I'm running Ubuntu 10.04 on a HP Mini 1116nr as expected i have no Wireless access but i also seem to have no wired access either.
View 2 Replies View RelatedI boot linux off a USB stick on many different computers with different hardware. How can I determine in a script which devices eth0, eth1, wlan0 exist and which hardware devices they apply too? Sometimes a wireless card is wlan0, other times it is eth1 or even eth3! The proc/net/dev file does not inidicate which hardware is installed.
View 2 Replies View RelatedI have not tried this, and I am only wondering about the result.Let's say that I have a PC/Laptop with two network devices: an ethernet and a wireless. Can I connect both of the to the same network (if this network allows both connection) to increase the transfer rate between the PC/Laptop and the server???
View 5 Replies View RelatedI am running Ubuntu 9.10 and Windows 7 (Wubi). Windows Networking shows all devices on the network (computers, routers, etc). Is there a way to get Ubuntu to do this (Would prefer GUI)?
View 3 Replies View RelatedI installl centos in my pc after i install, i cant surf the net,showing no devices for network
View 1 Replies View RelatedI've got three network devices on a laptop:
1. Built-in ethernet LAN
2. Built-in ethernet WLAN
3. PCMCIA ethernet LAN
I installed Ubuntu Server on this computer without the last one inserted.I inserted the last one today, and it lights up when i put in the cable. To be sure if Ubuntu has found it, I tested with the install CD and could see that it found all three at the first part of the installation where I have to chose a primary device.I can't get my WLAN card working, neither do I get my PCMCIA LAN card working. The third card, this PCMCIA card, has worked on Ubuntu Desktop using another laptop. And as said, the setup finds all three.
I just loaded 10.10 on an Acer Aspire One D255. When I installed Ubuntu, network manager loaded and I was able to use both the wired and wireless cards. After I used update manager, the kernel was upgraded, and I also added some wireless applications (RutilT WLAN Manager, SWScanner, and WiFi Radar). Upon reboot, the network manager doesn't work, and it cannot find any of the devices.
View 9 Replies View Relatedi'm quite new to Fedora, altough i'm now installing it on my second computer, a desktop pc,it is old (4 years or so), and has an ASUS M2N-SLI DELUXE URL... which worked fine under windows XP and had no problems.Now, after i've installed Fedora 13, i've found out that it isn't recognized, i'm unable to connect to internet, or to any other device, because under the network management window there are no network devices to select.
View 4 Replies View RelatedDoes anyone know where the System->Administration -> <Network Configuration> has been placed in F14? Can only find the System -> Preferences -> Network Connections, but here you have no checkbox to activate a device (although even so discribed in the HELP).
View 2 Replies View RelatedThis may be more suited for the networking forums, but I figured Community Cafe would be well rounded enough for someone to tell me if this is even possible (with minimal configuration that is).There are a few places I travel where I only have a wired connection to the Internet (no wifi), but when this happens is there a simple way to create an adhoc network so wireless devices can route through my computer and to the network? Reason I'm asking is I'm thinking of getting an iPad or iPod Touch which have wireless connections, but in the cases where my laptop is using a wired ethernet connection and the wireless card isn't used, I'd like to create an adhoc wireless network that'll let such wireless devices work.
View 4 Replies View RelatedI'm running Ubuntu 11.04 on my desktop and the 70-persistent-net.rules file seems to be ignored. The ethernet interfaces are randomly shuffled around on boot (i have 4 interfaces). The original one was configured to have a static IP address (eth0). Is there anything that prevents the /etc/udev/rules.d/70-persistent-net.rules from being applied/used?
View 1 Replies View Relatedi have a centos 5.5 server running tomcat,oracle xe,apache etc..i would like to be able my windows machine to access this server by name, and not ip, for example have http://backserv:7080 for oracle xe web admin and so on..i know one way is DNS, but if i install oracle on a windows machine in peer-to-peer network, i can allready access with by it's name. o i'm guessing i should do something with samba, wins or something like that.never mind i got now for the REAL complex stuff of insalling web sphere 7 without user interface (need to look for a response file).
View 2 Replies View RelatedI just installed Fedora 12 and grub is not working for me. I have 2 physical drives, and installed Fedora on sdb (win xp is on sda). I picked the option that the computer booted from sdb when I installed. I then went and switched the boot order in the bios so that the computer would boot from sdb. Now Fedora boots fine, but when I try to boot into windows I just get a blinking cursor. I tried booting to windows manually (via picking that drive from the bios options) and that works fine.
I tried to edit grub.conf, but wasn't sure how to address the appropriate hard drive. How do I know what to fill in? The linux drive is (hd0,0), and grub tried to make windows (hd1,0). How do I know what to put in (hdx,y) for the windows partition? Grub tells me I have a /boot partition so everything is relative to that.If I'm way off base, please let me know. Is there a way I can just re-run grub so that it looks for everything anew? I also looked at device.map and sda is hd0.---------- Post added at 02:42 PM CDT ---------- Previous post was at 02:37 PM CDT ----------If it helps, this is my grub.conf:
Code:
# grub.conf generated by anaconda
#
[code]....
What I am trying to do is the following: I have many IBM MT-M 6223 towers (Intel Xeon processor) that need to run a certain Fedora 9 configuration. It is working on one box, now it needs to be replicated on all of the others. What is being done is the working box is cloned, and then that image is loaded on all of the others.These boxes have 5 total Ethernet devices. There is one on-board port, and there are two 2-port expansion cards for a total of 5.
There was one initial problem out of the gate that has since been solved (or perhaps not completely). What was happening is that the boxes that received the cloned image had their Ethernet devices misnumbered. Instead of eth0 through eth4, they were numbered eth5 through eth9.This was eventually traced to the following file: /etc/udev/rules.d/70-persistent-net-config. That file contained the original settings from the box that was first cloned. It had eth0 through eth4 at the top with MAC addresses belonging the box that was the source of the cloned image. It looks like this mismatch was detected, and five more entries, numbered eth5 through eth9, got appended to the bottom with MAC addresses belonging to the new box.
Once /etc/udev/rules.d/70-persistent-net-config was deleted, and the machine rebooted, the 5 ethernet devices came up with the correct numbering (0 thru 4). /etc/udev/rules.d/70-persistent-net-config was rebuilt with the correct devname-MAC pairing.
Now for this new problem.... Part of the configuration across all these machines is that only eth3 should have an IP address. It is a static IP address set through the /etc/sysconfig/network-scripts/ifcfg-eth3 file. All of the other devices must NOT have any IP address. They are either not used or used only for raw Ethernet.After clearing out /etc/udev/rules.d/70-persistent-net-config, /etc/sysconfig/network-scripts/ifcfg-eth3 was edited to give the new box its own unique static IP address before rebooting.Sample ifcfg-eth3 file:
Code:
DEVICE=eth3
BOOTPROTO=static
[code]....
I'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
View 6 Replies View RelatedI can't see any of my devices showing up in network manager to configure even though they're using dhcp and working. How do I get them in so I can configure a proxy?
View 3 Replies View RelatedJust installed 11.3 kde. When running the live cd both wireless and ethernet devices appeared in the network connections manager utility. I even connected to a wireless AP.I just booted up for the first time and none of these devices are available. There is no network manager icon in the system tray, and when the network manager utility is maually opened the only connection type i can select is vpn.I know that opensuse should be able to recognize these devices since they were available and working via the live cd, so can anyone help me restore them?
One extra piece of info, is that I am sharing a home directory with a gnome ubuntu install. there were a few minor issues i dealt with initially, but i didnt need to change this user's UID like I have had to do in the past so that's good. Each time i open a terminal I get two pieces of output assuming from the bash startup saying something like.URL...I highly doubt that these problems are related, but figured I'd post. Also if someone knows the solution to that as well, that would save me a bit of googling.
i have an isolated LAN (no connection to outside) with 3 fedora boxes. Suppose one of the boxes has an IP device connected to the serial port. We use SLIP and slattach to configure it and we can ping the device from every fedora boxes. Is it possible to bring the external device (192.168.1.9) to the set of LAN devices that receive LAN broadcasts?
box 1: 192.168.1.1
box 2: 192.168.1.2
box 3: 192.168.1.3.
It runs slattach and uses 192.168.1.9 to address serial connected ip device. I set up this scenario and the external device is ping(ed) with success but if I build a socket udp program that sends a broadcast to the LAN all the fedora boxes receive it except the external serial device. Why.
I'm having an issue with dual networking on RHEL 5. My initial question is can the order the ethx (0,1) devices are brought up be changed at boot time, so I could bring up eth1 before eth0?
Some background: eth0 is DHCP'd and using DNS, basically this is my primary network. eth1 is an isolated subnet, with a manually configured IP which has no connection to eth0 or the outside world. When I bring up networking it first brings up eth0 and then eth1, what happens is eth1 becomes the 'primary' network of the host and I lose my connection to DNS/NFS/NIS and the outside world.
If I login and manually bring up eth1 first, then eth0 everyone is happy and connections work. So, I'm looking for a solution to either bring up eth1 before eth0 or somehow make eth0 my primary IP and not have it be clobbered by eth1.
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
I have a machine with several IP addresses with eth devices like eth0, eth0:1, eth0:2, eth0:3. Can I restart only eth0 without bringing down eth0:1? It would be really convenient to be able to log in via SSH on eth0:1 and restart eth0 without locking myself out or not being able to bring the network back up.
If I stop eth0, will that automatically stop all the others?
