Ubuntu Networking :: Gray - Apply - Button In NetworkManager Openvpn Connection Window
Nov 19, 2010
I installed all the necessary packages for the networkmanager-openvpn function to function. The openvpn-connection-setting are successfully imported into the networkmanger via the conf file but the apply button is grayed out, so that actually saving and using the connection isn't possible? Does anyone know, where the problem is? It's a fresh install of Ubuntu 10.10 after the upgrade from 10.04 sent the networkmanger down the drain.
View 2 Replies
ADVERTISEMENT
Jun 4, 2011
As I reported in this bug:[URL].. root is not able to start an openvpn-connection via the "nmcli"-command to control NetworkManager, whereas my user does not run in any problems with this command. My error output when starting as root is as follows:
Code:
# nmcli con up id "my-openvpn"
Active connection state: unknown
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/5
state: VPN connecting (need authentication) (2)
Error: Connection activation failed: no valid VPN secrets.
Does anybody know what to do about this strange behaviour? The vpn-secret seems to be stored in the gnome-keyring and in the /etc/NetworkManager/system-connections/my-openvpn simultaneously. But root cannot access any of these. Why this is important? I'm trying to set up a dispatcher-script to automatically start openvpn on eth-connection. but this does throw the exact error from above (no valid vpn secrets..).
[Code]...
View 1 Replies
View Related
Apr 5, 2010
i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
View 1 Replies
View Related
Jan 16, 2011
I got it set up in the NetworkManager applet (imported the client.ovpn), but when I connect it sends ALL my traffic through the VPN. I would prefer all accesses to the internet go over my normal default gateway, rather then all the way through to the VPN's default gateway.When I connect through the command line:
Code:
openvpn --config client.ovpn
I don't have this problem, and accesses to the internet still go over my default gateway on
[code]...
View 1 Replies
View Related
Jul 5, 2011
I have a Fedora 14 machine, and I have an OpenVPN CentOS 5.5 server installed and running without issues.I've setup the Fedora machine to connect as a client to the server, and all goes pretty well using NetworkManager.What I'm not able to do is getting NetworkManager to autoconnect to the server upon user login. I have the "Auto Connect" marked, but nothing happens at boot/login.
View 4 Replies
View Related
Jul 27, 2010
i have added a vpn connection on my Lucid desktop machine, but every time i try and connect, it fails. I also have the same, identical vpn connection on my karmic install on my laptop. everything works perfectly on Karmic, but Lucid is having problems. I have followed identical steps for creating the vpn connection on both machines: vpn connections can be made in 2 ways, the first is through the network manager, but trying to connect through the nm-applet returns an error about vpn failing to connect and "no valid vpn secrets".
I suspect this is at the root of the problem. The only way for my Lucid machine to successfully connect through the command line is if I run the openvpn command under sudo.
View 2 Replies
View Related
Jul 13, 2010
I am trying to use my tmobile 8320 blackberry as a modem I hook it up through the USB and the phone is recognized I go into network manager to enter the settings for my Apn and Number to dial to and when I try to enter the Network to connect to the apply button goes away and it won't let me go past that point is this something screwed up in Ubuntu
View 1 Replies
View Related
Mar 13, 2011
I'm getting a timeout error from NetworkManager when attempting to connect to my router/firewall.
Excerpt from /var/log/messages attached.
View 1 Replies
View Related
Jun 15, 2010
I just installed Ubuntu using WUI. It went OK. I am able to launch it, etc.
However I cannot manually enter my static IP information. I go to Edit Connections > IP4 settings > I then change the tab from DHCP to manual and then the "apply" button turns to a light darkish color and is non-selectable.
I also cannot save any network config note using gedit. It says I don't have permissions. I checked and changed my account type to Administrator and checked all the boxes then rebooted and still nothing.
View 5 Replies
View Related
May 8, 2010
I have problem in making connection to my vpn server I can make connection from windows xp to that but can not open any website and I can not ping 172.16.10.1 when connection established.
These are my configuration files:
server config file:
Quote:
client configuration file:
Quote:
And this is my server syslog tailed file:
Quote:
And I added this routing to /etc/rc.d:
Quote:
And this is my iptable:
Quote:
And vpn connection is lost after establishing a lot.
View 4 Replies
View Related
Mar 7, 2011
I have installed an OpenVPN server on my OpenWrt 10.03 router [freshly flashed]:
[URL]
It seems "ok".
I connect my pc to the lan port of the router, and i want to try it out. I'm using Fedora 14 with GNOME. In the NetworkManager applet i set these things: this and this. Ok!. i try to connect, but it fails. Here are the logs: [URL]
one important thing: my routers [the one with the openvpn server] ip address is 192.168.1.2, and i didn't had to write it nowhere. so how could the networkmanager applet know the ip address of my openvpn server? i think this is the problem, but i just can't find where to write 192.168.1.2
p.s.: yes, i tried to google for: "No server certificate verification method has been enabled." but i didn't find a thing, and i'm trying for hours now... :
p.s.: if i [on the router]:
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT
[Code]....
View 1 Replies
View Related
Jan 22, 2011
I have an OpenVPN setup at work, and windows clients are able to connect fine. On my dual-boot system (Windows XP 64-bit and Ubuntu 10.10 64-bit) I'm able to connect on Windows but not Ubuntu. I use the same files for each. The network manager wasn't working, so I'm doing it via the command line right now:
Below is the output (sanitized)
Code:
Does this mean it's connected? If so, I'm not able to ping anything on the remote network, not even the OpenVPN server.
View 4 Replies
View Related
Aug 21, 2010
I'm using OpenVPN to connect to a remote system. When I run
Code:
It brings up a new tunnel interface. The problem is that once the tun interface is brought up and the VPN is established, my whole Internet connection slows to a crawl.
Here is the output from ip route show before openvpn:
Code:
And after openvpn:
Code:
View 2 Replies
View Related
Dec 5, 2010
I have an openvpn bridge up and running (ubuntu to ubuntu, both in vmware fusion machines on macs). My problem is that I cannot get a connection faster than ~9mbps even though 20+mbps is available. I've been troubleshooting for a while and have tried many fixes. I just now did ethtool tap0 and I think maybe I found it. It says the link is 10mbps. I tried to change it with:
sudo ethtool -s tap0 speed 100
but it says ethtool cant change speed on tap0. How can i define the link speed of tap0?
View 3 Replies
View Related
Jul 20, 2011
I have installed OpenVPN for network-manager using "sudo apt-get install network-manager-openvpn". Now I have it in my network-manager, but I dont know how to configure a connection, I have a configuration script, when I import that script in network-manager it automatically creates a connection, but still problems exists ...
View 3 Replies
View Related
Jul 28, 2010
i'm realatively new to linux am just getting my head around the command line, any way my problem today is, my network connection and networkmanger program have been deleted/uninstalled after i did a system update. im running ubuntu 10.04 32 bit. I have run of some commands which should be able to tell you whats going on. at the moment i'm using a live ubuntu cd to gain net access.
so the question is How do i restore my network connection and get my networkmanager program back without a internet connection. (i can download stuff to a memory stick and do manual install) Hope someone can shed some light on this, i know this topic has been covered before although each case seems slightly different to mine.
[Code]...
View 8 Replies
View Related
Feb 24, 2011
I'm running Ubuntu 10.04.2 LTS and from time to time eth0 connection is lost.
Looking at syslog (below), if its a hardware (network card) problem or a software bug?
syslog file:
View 4 Replies
View Related
Jul 12, 2011
I am having problems setting up openvpn with networkmanager. I am running fedora15 with the newest networkmanager. Okay here is some info...
openvpn runs at boot time no problem...
Here is a copy of the boot time message from /var/log/messages
Code:
Here is a copy of tun0 from the ifconfig, and also you can see that openvpn is running from the command "netstat -ntl"
Code:
Here is the options i am using for server.conf for openvpn.
Code:
Okay well when i try to add openvpn to network manager i select the openvpn option and it ask for the required fields.
For gateway i am using -> 10.0.0.0
ALL other options i am just using the defaults...
Now i am not sure if they options that i am using is correct... if anyone has any input i would love to hear some.
Now when i try to start New VPN Connection from network manager it fails to connect and here is what i am getting from /var/log/messages
Code:
If you want to recommend command line options instead of using the network manager gui i am okay with that...
View 7 Replies
View Related
Sep 7, 2010
I have setup an OpenVPN server on Ubuntu server. I am able to connect with Windows clients. I am, however, unable to correctly connect using Ubuntu.
If the router firewall is blocking the pings to keep the connection alive, then the connection initially does not work, but will work after the first timeout and reconnect. If the firewall does not block the pings then the initial connection attempt never times and therefore the connection does not work.
Attached is the readout from the client.
The first attempt gives error ERROR: Linux route add command failed: external program exited with error status: 7
Successive attempts work, they just time out every two minutes.
View 1 Replies
View Related
May 25, 2011
I'm using Fedora 15 with KDE, and in the NetworkManager settings I can't set my Ethernet connection to be a System Connection. The box is greyed out. I assume only root can enable this option, but GUI apps typically ask for an administrator password. I did add my user to the "Administrator" group when I installed and I can use sudo and all that.
View 2 Replies
View Related
Dec 24, 2009
After some wonderful days with fedora with my CDMA mobile internet connection (the only connection where I live) NetworkManager can't connect anymore.
I tried to delete the settings and rewrite them without success.
I have A Novatel Ovation U720 CDMA/EDVO USB modem.
I can connect with wnXP and kubuntu, but can't connect with fedora anymore.
I wish to make the definitive move from kubuntu to fedora... but I should wait.
View 2 Replies
View Related
Jun 23, 2010
My network is barely functional. I'm running 2 linux servers connected by openvpn (tun) through routers on both sides. There are Windows clients (98 and XP) on both subnets. One server (ls3) acting as PDC for the domain. The Windows clients use the respective linux boxes as gateways. On the server side (ls3 which is both openvpn server and samba server), all the clients can read/write properly to shares on both sides. The problems are all on the client side. Share connections to the server side disconnect after a few moments.
Browsing on the client side windows machines is fine. I can see shares on the server side. Some server side files open and are readable, writable, other server side files will not open. Some samba logon scripts on the server side can be opened from the client side. Others open after a long wait to a blank file! Permissions on server side files are set to 777 for testing. If a file won't open or reads "blank", that doesn't change no matter how many times you try. A non-readable/writable file overwritten by a readable/writable one can be read and written to!
I can ping successfully from any client on either side to any other client by either ip address or workstation name. Firewalls on both side are set to forward tcp and udp traffic going to port 1194 to the respective gateway linux boxes. Iptables on both linux gateways are down for testing. I tried reversing the openvpn server/client roles with the same result; the same physical side of the network had the problem. On one of the windows 98 clients, I wiped out the networking configuration completely and rebuilt it from scratch. Same result.
One one of the windows xp clients, I tried to rejoin the domain. It went through successfully but the result was the same as above. The network was operating smoothly for several years until the client side dsl modem broke last week. It was replaced with a newer model and at the same time I migrated from a pptp connection to openvpn. How to resolve this, Is this something to do with openvpn? Is this a network hardware problem? Am I missing something in the port forwarding on the routers? My smb.conf files are ancient except I added interface tun0. I have never seen 2 files sitting next to each other in the same directory where one opens and the other doesn't!
I'm running Mandrake 9.2 on the client side and Mandriva 2008 on the server side. I have a Sonicwall firewall on the server side, a Westell 7500 on the client side. I note that during the modem install, the http port was opened to the linux box on the client side and the access log got huge over the weekend and I ran out of disk space until I closed it down and deleted the log. I tried a simple test while viewing /var/log/daemons/errors on the client side. From a windows workstation in the client subnet, I opened a dos window and tried to print a file located on the samba server on the openvpn server machine which I knew NOT to be problematic.
The file printed and there were no errors reported in the log. I repeated the test with a known problematic file. The file would not print. The errors log noted:
Authenticate/Decrypt packet error: packet HMAC authentication failed
I regenerated the static.key file on the server side and scp'd it to the client side and restarted both openvpn's. I checked for duplicate files named static.key on both sides. Same error.
View 1 Replies
View Related
Jun 13, 2009
The symptom is that NetworkManager repeatedly ask for password to connect to my AP.My AP is secured with WPA-PKI. The problem even happens with Fedora 11 live cd if I'm not quickly configure wireless connection using NetworkManager right after Fedora completes booting up. It means if I promptly configure wireless connection, i'm still able to access Internet. Same thing happens for the first boot of Fedora from hdd. For the second boot or when I dont quickly configure wireless connection when system finished booting up, NetworkManger repeatedly asks for password for AP.
I did try several approaches posted in this forum but problem still persisted. Some of approaches I tried are:
[Code]....
View 2 Replies
View Related
Aug 10, 2010
Yesterday I did an upgrade and today my box is unable to connect to the internet.
I have tried another cable, it didn't help.
Basically NetworkManager does not connect eth0 to the network, if I try to run ifup from the command line I get:
Code:
I can see in network configuration settings, that the device has been correctly detected and eth0 interface is correctly activated, yet when I try to uncheck the box manage by NetworkManager and start it manually, it tells me that the cable is disconnected... I've tried two different cables, different ports on my router - no help.
View 3 Replies
View Related
Nov 30, 2010
i have installed fedora12 in my compaq laptop.i am under proxy..i just gave the local ip address to the laptop..and try to activate the etho device..but ..all the activate,deactivate,delete buttons are grayed out..they are completely looking dead..
View 2 Replies
View Related
Jul 8, 2011
I like to start Emacs as part of a login script and leave it running for the duration of my login session (which is typically weeks).
I have scripts to call emacs-client which will allow me to use a file-manager or Windows Explorer to locate files and right-click to edit them in Emacs.
I often end up with a lot of emacs windows (frames) open and I like to just be able to close them by clicking on the MS-Windows or KDE X button at the top-right.
The trouble is, if the window is the last one, this will shut down emacs which will lose all kinds of interesting history information.
As a work-around I use C-x 5 0 which won't let me close the last frame but this is often not as convenient as using the mouse
Does anyone know how to configure Emacs so that it can intercept the Window-Close button of the last frame to either request confirmation or simply disallow it?
On MS-Windows, disallowing closing of the last window may cause logoff to hang if emacs is still running but I'm not too worried about that.
View 2 Replies
View Related
Feb 3, 2011
i was so happy using the window buttons applet in gnome panel. it was working fine in maximize window , now suddenly i find the close button has vanished i tried to remove and re install, changed theme and all the jugglery within my limits... have absolutely no idea what went wrong, any clue ? to get back the "CLOSE" button ? its funny with just the minimize and restore button visible in maximised mode... its the close button i use most in maximise mode
View 1 Replies
View Related
Mar 2, 2011
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
View 5 Replies
View Related
Apr 8, 2011
Still pretty new to this, from what i have read, the more info i give the better, I am running ubuntu 11.04 with KDE installed via the terminal. I was trying to get my TV to work as another display, I don't know what I have done, after my earlier problems I have learnt to back up and restore my xorg.conf file but with no luck, I now can't change any settings as the title says the apply button is grayed out and when i try and save it to the xorg.conf file and restart the xserver it says that "Your current changes to the X server display configuration may no longer be applied due to changes made to the running X server.
You may either reload the current X server settings and lose any configuration setup in this page, or select "Cancel" and save your changes to the X configuration file (requires restarting X to take effect.)
If you select "Cancel", you will only be allowed to apply settings once you have reset the configuration.Your current changes to the X server display configuration may no longer be applied due to changes made to the running X server. You may either reload the current X server settings and lose any configuration setup in this page, or select "Cancel" and save your changes to the X configuration file (requires restarting X to take effect.)
If you select "Cancel", you will only be allowed to apply settings once you have reset the configuration. Your current changes to the X server display configuration may no longer be applied due to changes made to the running X server. You may either reload the current X server settings and lose any configuration setup in this page, or select "Cancel" and save your changes to the X configuration file (requires restarting X to take effect.)
If you select "Cancel", you will only be allowed to apply settings once you have reset the configuration."
when I booted last i got terminal with this showing, for the first time,
Xlib: extension "RANDR" missing on display ":0".
(orca:1984): Wnck-WARNING **: Property _NET_WM_NAME contained invalid UTF-8
My xorg.conf is
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 270.29 (buildd@roseapple) Fri Feb 25 14:43:24 UTC 2011
Section "ServerLayout"
[Code]...
View 5 Replies
View Related
Mar 20, 2010
This has already been asked, and answered here: [URL] but there is one problem, this requires a window manager, and network-manager. I am using Ubuntu 9.10 Minimal with no window manager, and i want to recreate the exact effects of the second post in the above thread.
I have one desktop (Ubuntu 9.10 Minimal) with a USB wireless adapter (wlan1) and an ethernet port (eth0). I want my second desktop (also 9.10 Minimal; connected to desktop 1 via ethernet on eth0) to recieve the connection through desktop 1's wireless. I realize this is rather easy with network-manager, but I am not sure how to go about it through command line.
View 9 Replies
View Related
