Ubuntu Networking :: OpenVPN Bridge - Cannot Get Faster Connection
Dec 5, 2010
I have an openvpn bridge up and running (ubuntu to ubuntu, both in vmware fusion machines on macs). My problem is that I cannot get a connection faster than ~9mbps even though 20+mbps is available. I've been troubleshooting for a while and have tried many fixes. I just now did ethtool tap0 and I think maybe I found it. It says the link is 10mbps. I tried to change it with:
sudo ethtool -s tap0 speed 100
but it says ethtool cant change speed on tap0. How can i define the link speed of tap0?
View 3 Replies
ADVERTISEMENT
Nov 7, 2010
I have OpenVPN running on my Ubuntu Server just fine. I can connect over the Internet and access all my resources on the LAN via bridged mode perfectly. My server only has one LAN card and sits behind my router, which means it has a private IP address of 10.1.1.2....Which brings me to my question. I want to open up access to my friends via OpenVPN, but I don't want them to be able to access other machines on my LAN (e.g. 10.1.1.20). However, I do want them to be able to talk to each other and pass broadcasts (old LAN games), as well as my laptop (let's say 10.1.1.7).I've tried using iptables to block traffic to the LAN (such as .20), to no avail. I've been reading up and it seems as though iptables won't even filter the traffic, as it's passed at a lower layer. Is this true? If so, what do you recommend I do in order to prevent my buddies from accessing the rest of my LAN while siumultaneously allowing broadcasts pass for some very old Windows LAN games (we're talking Windows 9.
View 2 Replies
View Related
Apr 5, 2010
i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
View 1 Replies
View Related
Oct 27, 2010
I followed this tutorial => https://help.ubuntu.com/community/OpenVPN
I'm working on ubuntu 10.10 OS
So everything is ok when i start the tutorial with my interface on code...
The only way I can make it work again is by setting the interfaces back to
auto lo
iface lo inet loopback
>> then reboot
and after that put back the br0 settings in the interfaces en restart the network.
View 4 Replies
View Related
May 8, 2010
I have problem in making connection to my vpn server I can make connection from windows xp to that but can not open any website and I can not ping 172.16.10.1 when connection established.
These are my configuration files:
server config file:
Quote:
client configuration file:
Quote:
And this is my server syslog tailed file:
Quote:
And I added this routing to /etc/rc.d:
Quote:
And this is my iptable:
Quote:
And vpn connection is lost after establishing a lot.
View 4 Replies
View Related
Jul 19, 2010
I have a Gateway laptop running ubuntu 10.04, and just now have a compaq desktop running windows 7, my laptop has wireless internet connection, it's the only way that i can get it in my room. my desktop has only ethernet plugin. My question is, If i plug my laptop up to my desktop using an ethernet cable, can i bridge that connection to get internet from my laptop(using the wireless) to my desktop(using the cable)
View 1 Replies
View Related
Oct 22, 2010
I use openvpn to connect otherwise isolated machines, and use samba to share filesystems across the vpn, which works just fine.But I recently discovered that copying files using rsync -e ssh is so much faster than copying from a mounted filesystem - like about 5 times faster.I've got comp-lzo enabled in both server and the client, at least I think I have, the directive is there in both the server.conf and the client.conf files, but how do I check that it's active?Does anyone know if I can make openvpn behave more like rsync, because copying is easier than rsyncing?
View 8 Replies
View Related
May 5, 2010
How I can make this "link" with Ubuntu 10.04?
pc 1 == win xp
pc 2 == Ubuntu 10.04
View 1 Replies
View Related
Jul 23, 2011
just wondering if I could get a hand with bridging my eth0 and wlan0 connection. I'm using Ubuntu 11.04 if that helps at all.
View 1 Replies
View Related
Jul 3, 2009
I want to connect my dataone broadband connection in bridge mode in fedora 7. As i am currently using a bridge connection through this modem (smartAX MT882) in win XP, i want a bridge connection in fedora 7 too to access the internet from linux. I have gone through some forums discussing this issue. somewhere i have found the option "adsl - setup" and tried it in my fedora 7. But it is showing the message "adsl- command not found" on this issue. I need a detail step by step procedure for brigde connection using datone in fedora 7.
View 3 Replies
View Related
Sep 9, 2010
I'm following this guide [URL]. I am trying to use a bridge to vpn from work to home.
/etc/network/interfaces
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto br0
iface br0 inet dhcp
bridge_ports eth0
iface eth0 inet manual
up ifconfig $IFACE 0.0.0.0 up
up ip link set $IFACE promisc on
down ip link set $IFACE promisc off
down ifconfig $IFACE down
I am forced to use dhcp because of my router. (although it is a static lease) I think this is where I am hung up. Everything else seems to be working properly though. I have a windows client connecting but is limited to the server serving out openvpn. (192.168.1.21) In other words it is not functioning as a bridged vpn service.
ifconfig
openvpn server.conf
local 192.168.1.21
port 1199
proto udp
dev tap0
up "/etc/openvpn/up.sh br0"
down "/etc/openvpn/down.sh br0"
ca ca.crt
cert server.crt
key server.key # This file should be kept secret
dh dh1024.pem
ifconfig-pool-persist ipp.txt
server-bridge 192.168.1.21 255.255.255.0 192.168.1.100 192.168.1.200
keepalive 10 120
tls-auth ta.key 0 # This file is secret
comp-lzo
user nobody
group nogroup
persist-key
persist-tun
status openvpn-status.log
verb 3
View 2 Replies
View Related
Feb 3, 2011
I have an Ubuntu VPS running 10.10 x86_64
This is what is in my /etc/network/interfaces right now.
Code:
auto eth0
iface eth0 inet static
address 67.202.x.x
gateway 67.202.x.1
netmask 255.255.255.0
auto lo
iface lo inet loopback
My server.conf
code....
I can get the VPN server running and everything connects fine from the client. I just don't know how to tunnel all the traffic through the VPS because it involves making the bridge which I'm having trouble with. What exactly am I supposed to put in /etc/network/interfaces?
View 1 Replies
View Related
May 12, 2011
I'm trying to setup openVPN on debian, well this worked. But every client will get the same ip (172.17.0.6 - local it is). how to set my server in bridge mode. I've read about: server-bridge LOCALIP 255.255.0.0 172.17.1.20 172.17.1.100
BUT, my server has no ipv4 address, but only ipv6: 2001:41d0:2:b2d6::542a:74a so I am not sure how I can do this.
View 1 Replies
View Related
Oct 2, 2009
"I am new to Linux. Could you please guide me how to make ADSL bridge connection. I have tried to make connection using Network manager. But, it some times works and some times doesn't works."
View 1 Replies
View Related
Jan 22, 2011
I have an OpenVPN setup at work, and windows clients are able to connect fine. On my dual-boot system (Windows XP 64-bit and Ubuntu 10.10 64-bit) I'm able to connect on Windows but not Ubuntu. I use the same files for each. The network manager wasn't working, so I'm doing it via the command line right now:
Below is the output (sanitized)
Code:
Does this mean it's connected? If so, I'm not able to ping anything on the remote network, not even the OpenVPN server.
View 4 Replies
View Related
Sep 10, 2010
I need to execute scripts to setup the bridge after openvpn is restart. Where do I put the scripts? How do I get openvpn to execute them?
View 2 Replies
View Related
Aug 21, 2010
I'm using OpenVPN to connect to a remote system. When I run
Code:
It brings up a new tunnel interface. The problem is that once the tun interface is brought up and the VPN is established, my whole Internet connection slows to a crawl.
Here is the output from ip route show before openvpn:
Code:
And after openvpn:
Code:
View 2 Replies
View Related
Jul 20, 2011
I have installed OpenVPN for network-manager using "sudo apt-get install network-manager-openvpn". Now I have it in my network-manager, but I dont know how to configure a connection, I have a configuration script, when I import that script in network-manager it automatically creates a connection, but still problems exists ...
View 3 Replies
View Related
Oct 27, 2010
I have a bridged network setup ifconfig -a gives following output
Code:
br0 Link encap:Ethernet HWaddr 00:26:b9:82:42:38
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::226:b9ff:fe82:4238/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:150779 errors:0 dropped:0 overruns:0 frame:0
[Code]...
3) What are these vmnet1,vmnet2,vmnet3,vmne4 which I see above. I used kvm and virt-manager to create a bridged setup.
View 1 Replies
View Related
Jul 12, 2011
I am having problems setting up openvpn with networkmanager. I am running fedora15 with the newest networkmanager. Okay here is some info...
openvpn runs at boot time no problem...
Here is a copy of the boot time message from /var/log/messages
Code:
Here is a copy of tun0 from the ifconfig, and also you can see that openvpn is running from the command "netstat -ntl"
Code:
Here is the options i am using for server.conf for openvpn.
Code:
Okay well when i try to add openvpn to network manager i select the openvpn option and it ask for the required fields.
For gateway i am using -> 10.0.0.0
ALL other options i am just using the defaults...
Now i am not sure if they options that i am using is correct... if anyone has any input i would love to hear some.
Now when i try to start New VPN Connection from network manager it fails to connect and here is what i am getting from /var/log/messages
Code:
If you want to recommend command line options instead of using the network manager gui i am okay with that...
View 7 Replies
View Related
Sep 7, 2010
I have setup an OpenVPN server on Ubuntu server. I am able to connect with Windows clients. I am, however, unable to correctly connect using Ubuntu.
If the router firewall is blocking the pings to keep the connection alive, then the connection initially does not work, but will work after the first timeout and reconnect. If the firewall does not block the pings then the initial connection attempt never times and therefore the connection does not work.
Attached is the readout from the client.
The first attempt gives error ERROR: Linux route add command failed: external program exited with error status: 7
Successive attempts work, they just time out every two minutes.
View 1 Replies
View Related
Jun 23, 2010
My network is barely functional. I'm running 2 linux servers connected by openvpn (tun) through routers on both sides. There are Windows clients (98 and XP) on both subnets. One server (ls3) acting as PDC for the domain. The Windows clients use the respective linux boxes as gateways. On the server side (ls3 which is both openvpn server and samba server), all the clients can read/write properly to shares on both sides. The problems are all on the client side. Share connections to the server side disconnect after a few moments.
Browsing on the client side windows machines is fine. I can see shares on the server side. Some server side files open and are readable, writable, other server side files will not open. Some samba logon scripts on the server side can be opened from the client side. Others open after a long wait to a blank file! Permissions on server side files are set to 777 for testing. If a file won't open or reads "blank", that doesn't change no matter how many times you try. A non-readable/writable file overwritten by a readable/writable one can be read and written to!
I can ping successfully from any client on either side to any other client by either ip address or workstation name. Firewalls on both side are set to forward tcp and udp traffic going to port 1194 to the respective gateway linux boxes. Iptables on both linux gateways are down for testing. I tried reversing the openvpn server/client roles with the same result; the same physical side of the network had the problem. On one of the windows 98 clients, I wiped out the networking configuration completely and rebuilt it from scratch. Same result.
One one of the windows xp clients, I tried to rejoin the domain. It went through successfully but the result was the same as above. The network was operating smoothly for several years until the client side dsl modem broke last week. It was replaced with a newer model and at the same time I migrated from a pptp connection to openvpn. How to resolve this, Is this something to do with openvpn? Is this a network hardware problem? Am I missing something in the port forwarding on the routers? My smb.conf files are ancient except I added interface tun0. I have never seen 2 files sitting next to each other in the same directory where one opens and the other doesn't!
I'm running Mandrake 9.2 on the client side and Mandriva 2008 on the server side. I have a Sonicwall firewall on the server side, a Westell 7500 on the client side. I note that during the modem install, the http port was opened to the linux box on the client side and the access log got huge over the weekend and I ran out of disk space until I closed it down and deleted the log. I tried a simple test while viewing /var/log/daemons/errors on the client side. From a windows workstation in the client subnet, I opened a dos window and tried to print a file located on the samba server on the openvpn server machine which I knew NOT to be problematic.
The file printed and there were no errors reported in the log. I repeated the test with a known problematic file. The file would not print. The errors log noted:
Authenticate/Decrypt packet error: packet HMAC authentication failed
I regenerated the static.key file on the server side and scp'd it to the client side and restarted both openvpn's. I checked for duplicate files named static.key on both sides. Same error.
View 1 Replies
View Related
Nov 19, 2010
I installed all the necessary packages for the networkmanager-openvpn function to function. The openvpn-connection-setting are successfully imported into the networkmanger via the conf file but the apply button is grayed out, so that actually saving and using the connection isn't possible? Does anyone know, where the problem is? It's a fresh install of Ubuntu 10.10 after the upgrade from 10.04 sent the networkmanger down the drain.
View 2 Replies
View Related
Dec 8, 2008
I want to set up a bridge using bridge-utils within /etc/network/interfaces like is shown here in this guide: [URL] The problem is that, at the same time, I want eth0 to have a specific static IP address. Right now I have a configuration for eth0. This guide tells me that I should not configure eth0 outside of the br0 configuration.
View 3 Replies
View Related
Jun 24, 2011
So I switch between Ubuntu and Windows alot, because some games I can only get to run smoothly in the windows environment. Anyways, one thing I have been noticing ever since I got Ubuntu but never really questioned, was about my download speeds. When downloading a torrent in Windows, I topped out out about 2.0 mb/s. Where as in my Ubuntu install, running the same torrent program (utorrent) and downloading the same file, I was getting 3.0 mb/s. I was wondering, what is it about Ubuntu that is utilizing my internet connection better? Only a hand ful of times have I ever reached 3.0 in my windows install (such as right now while I am downloading a game through steam).
View 3 Replies
View Related
Jun 4, 2011
As I reported in this bug:[URL].. root is not able to start an openvpn-connection via the "nmcli"-command to control NetworkManager, whereas my user does not run in any problems with this command. My error output when starting as root is as follows:
Code:
# nmcli con up id "my-openvpn"
Active connection state: unknown
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/5
state: VPN connecting (need authentication) (2)
Error: Connection activation failed: no valid VPN secrets.
Does anybody know what to do about this strange behaviour? The vpn-secret seems to be stored in the gnome-keyring and in the /etc/NetworkManager/system-connections/my-openvpn simultaneously. But root cannot access any of these. Why this is important? I'm trying to set up a dispatcher-script to automatically start openvpn on eth-connection. but this does throw the exact error from above (no valid vpn secrets..).
[Code]...
View 1 Replies
View Related
Oct 25, 2010
I am using Red Hat Linux enterpriser 4 using two physical LAN cards.There are two different ISP internet lines coming into a single gateway computer. Is it possible that if in our one network we are using 2 MB bandwidth and from another network we are getting 2 MB bandwidth.(Two different Networks) and combine it into 4 MB. In bonding it combine the bandwidth or it do loadbalancing ?
The question is can we accumulate or add these two bandwidth in Linux machine and it sent total bandwidth 4 to the end users ?
Lan Card A
IP Address: 192.168.1.250 2MB Bandwidth
l
l
l
[Code]....
View 2 Replies
View Related
Nov 3, 2010
My host is ubuntu 9.04 and the guest is winxp sp3. I need to use QEMU to monitor the network communication for security researches. But I failed to establish the connection between the host and the guest.
To build a TAP connection, I input commands as the following t.
How should I establish the TAP and Bridge connection in the QEMU?
View 1 Replies
View Related
May 5, 2011
First of all I have a Ethernet cable from the wall to my desktop then I have a Ethernet cable from my desktop to my laptop. Before I did a fresh install of Ubuntu 11.04 I was using Ubuntu 10.10 and I found a tutorial to make this network bridge work by changing settings in the Devices - Network Tools. I need to make this bridge work again and i totally forgot how and I can't find the tutorial.
View 1 Replies
View Related
Mar 12, 2011
I have installed opensuse 11.4 xen on a HP ML115 G5 AMD Opteron server, which previously hosted a fully working opensuse 11.3 xen. The problem seems to be that br0 is not showing as a bridge device in network settings. When I first installed opensuse 11.4 networking was available via dhcp, I then installed the xen tools and answered the prompt to create a bridge, it was only when I re-booted the system that I lost my network connection.
Going back into network settings I compared the settings to an existing working opensuse 11.3 xen install that I have and noticed that br0 is not showing as a bridge device in network settings so cannot be selected, in fact no bridged devices are shown.
View 5 Replies
View Related
