I installed 10.10 for some days ago, networking was working smooth back then. I use a ethernet cable to connect to the internet.But yesterday when I installed 10.10 on my brothers laptop(he connects through wireless), I began to get these disconnects and reconnects.They just seem to happen random.
View 2 RepliesI want to know any command which is equal to disconnecting and reconnecting lan cable. actually sometimes my router takes some time to connect to internet and when this happens my desktop shows network disconnected. but when router is connected system does no detect it and i have to manually disconnect and reconnect the cable which is not convenient.
I have debian 6.0.1 (squeeze) with gnome 2.30.2
And i have already tried following commands:
I am access my linux box remotely using putty. I ran some build process on the remote machine. I lost my connection and now I had to re login using putty. I dont know if my process has finished or not. How will I check that.
View 2 Replies View RelatedBeen trying to deal with this one for some time, and still not sure it's more or an issue on the Samba or Win 7 side.
Running Ubuntu 10.04 with Samba 3.4.7, using Windows clients from 2000 on up to access shares.
2000 and XP have no trouble both connecting initially to shares, but upon reboot the shares are disconnected and do not automatically reconnect unless one of them is double-clicked on. Passwords and mappings are saved such that Windows tries to reconnect upon restart. When manually reconnected in this way, shares remain open as they should. This isn't a big issue, but it would be preferable to have these shares reconnect so that links and shortcuts across the LAN work right from bootup.
The bigger issue is with Vista/Windows 7 - When shares are set up with appropriate passwords and such on the clients, they work as expected, until the client is rebooted. After signing into windows 2 things are observable:
- Black screen for 2-5 minutes before desktop appears
- error message appears when you try to double-click on a mapped share (even with a saved password) that the connection cannot be restored.
If you go into credentials manager and delete the saved password for the share(s) on the samba server, you are prompted for the password when you try to open any of the shares - reenter it and you're then fine until the next reboot.
There must be some issue with the persistence of the saved password, but not sure if this a Windows-side issue or not. Read some other info on this, and had to make the following changes earlier to even get Win 7 clients to connect to samba at all:
[URL]
It appears that when Win 7 starts up, it simply can't connect using the saved password, and the desktop doesn't come up until the reconnecting action(s) time out (if you disconnect your win 7 machine from the network the delay is not present).
It's not a game-breaker, but really annoying when rebooting having the delay and reentering the network share password(s).
I've just loaded the new Hamachi2 Linux beta with Haguichi for a GUI. Everything installed & connects OK, but the connection at the hub is dropping & reconnecting every minute or so. I tried adding a line to the sshd_config file to keep it alaive but it didn't make a difference.
View 3 Replies View RelatedI am using ubuntu 9.10. in my area there are frequent power outage. So my wifi get disonnected as the router stops. And it asks for security code. So when power comes the router starts but i have to manually write the security code and connect to wifi again. how i can make the computer to auto connect to wifi after power comes.
View 3 Replies View RelatedI am running openVPN to secure my wireless network traffic right now. Everything works great except every once in a while, my Internet connection will drop out for about a minute or so. Ubuntu very nicely tries to reconnect, and most of the time successfully does. The issue is that if I don't catch it every time this happens, I am now running without my VPN.
I want to know if there is any way to DISABLE auto-reconnect to a wireless network if connection is lost or signal fades.
Im running ubuntu 10.10 by the way
Within the last couple of days or so, my wireless has been on the fritz. It keeps disconnecting and reconnecting every minute or so, which is annoying to say the least. The information relating to my wireless network is:
Laptop model: Toshiba Satellite L350
Wireless interface: Atheros AR5001 Wireless Network Adapter
Interface:
[code]...
after maybe half an hour, the wireless download rate drops to about 110ks (and runs happily at up to 20x this until then). At that point, it will never pick back up above that rate unless i disconnect and reconnect. Once the problem occurs once, its like to reoccur about every 5 to 10 minutes until the machine has rebooted.
[Code]...
I am running F13 on my Desktop (with a Ralink RT2870 wireless card) and also on my Laptop (Acer Aspire 5738Z) and am connecting to the internet via a NetGear router. On my Laptop I can connect to the internet fine with no problems. However on my Desktop when I turn my computer on it connects to the internet fine, and works, however after some time (maybe 5-10 minutes) it disconnects and the box asking for the password reappears, then I click connect but no joy.
The connection box just keeps reappearing and it won't connect again until I restart the computer (although sometimes it takes more than 1 restart!). This is not a signal issue, as my Desktop also has a Windows partition and that connects to the internet fine and does not drop off. I have installed the RT2870 driver through rpmfusion, which didn't fix the problem, although uninstalling the driver didn't stop the card from working.
I have a Dell Inspiron 6000 laptop running Fedora 12. Recently my wireless connection has begun dropping every few hours and not reconnecting. After trying for about 30-45 seconds, the WPA password prompt comes up but still doesn't connect.
Fedora release 12 (Constantine)
Kernel Linux 2.6.32.9-67.fc12.i686
GNOME 2.28.2
Memory: 2.0 GB
Processor: Intel Pentium R 1.60 GHz
My laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?
View 4 Replies View RelatedWifi seems to disconnect fairly requently, sometimes reconnecting automatically and sometimes requiring me to re-enter the wep password.
I would like to make it so it stays connected.
The router is not very close, but I think it's close enough. I even moved it closer. Other devices (such as my N900 mobile phone) hold the connection without issue.
One complication is that there are several devices all with the same SSID, though there should be one which is clearly stonger.
Details below.
1 ) Machine Brand and Model (PC/Laptop):
Code:
2 ) Wireless Brand, Model and Wireless Chipset:
Code:
3 ) check interface:
Code:
4 ) Check for modules:
Code:
5 ) Kernel boot messages
Code:
I never had this problem with Ubuntu before and I am now confused. This is a clean install and I have not change anything about my AP so don't why this is happening.
Every 5min or so my wifi keeps disconnecting and sometimes have problems reconnecting. I also have Windows on this machine and it does not do this at all. My AP is set to channel 9(changing it makes no difference), WPA2. Logs below
Code:
[ 15.668746] alloc irq_desc for 33 on node -1
[ 15.668748] alloc kstat_irqs on node -1
[ 15.668768] iwlagn 0000:02:00.0: irq 33 for MSI/MSI-X
[ 15.696615] alloc irq_desc for 22 on node -1
[Code].....
I have recently purchased a cellular usb modem, a ZTE MF637. To my surprise and pleasure the device worked (almost) out of the box (almost, because I had to supply a user name and password to the wireless broadband connection properties).
Anyway, the problem is, that the connection work fine, but only for 20 minutes or so (I did not actually measure it), then I experience 0 network activity, and shortly after that the connection drops, and the device is no longer recognized as wireless broadband.
What I do is remove the device, replug it, and after a minute it reconnects. until the next drop.
I'm using Lucid on an Asus eee 1101HA.
Oh, one more thing, in lsusb, the device is listed as MF636, but the box reads MF637. I don't know if it matters, but there it is.
I have always had trouble in the past getting wireless adapters and what not to start working on Ubuntu but with each 6-month upgrade most problems are fixed while new ones are made. Since Ubuntu 10.10 just came out I thought I'd give it a go and test it with my hardware.
Before 10.10 Ubuntu could not connect with my wireless device and I had to do many things with gedit and such to get it working. After I have upgraded to 10.10 Ubuntu now recognizes my wireless device and network and I can search the web...but wait here it comes.
Literally minutes after a fresh install and first connection to my network my wireless signal will drop and prompt me to reconnect. Of course the first thing comes to mind I reconnect which doesn't work so I unplug the device and replug it making it works...Two minutes later my connection drops again and so I so reboot, and if you really want to know what happens next just restart this paragraph.
Things you need to know Operating System - Ubuntu 10.10 64-Bit Wireless Adapter - Hawking HWUN3 Hi-Gain Wireless-N Network USB Adapter Router - Apple Airport (99% sure it has all updates)
When you access the VPN service gives this error below.
daemon.log
Code:
i installed ubuntu 10.10 remix netbook edition on hp mini 110 last day. my wifi is working fine its connecting every network only problem is it cant keep its connection constant, i mean it keep disconnecting frequently. once it disconnect i tried to connect again but it connects but i can not surf internet.
View 1 Replies View RelatedI have a Toshiba Satellite M55-S325 (as it came from the factory, no mods), a Linksys WRT54G router, and Ubuntu 9.10/Karmic with all updates. I've had issues since I upgraded from 9.04/Jaunty to 9.10/Karmic. It did work for awhile (I think a few days), but then it suddenly just couldn't find our wireless network. I reformatted (with 9.10) thinking it had just been a bad install - now I can connect to our network, but it throws me off every two minutes. My roommate (Dell laptop, Vista) has no problems with the internet, and I've visited a friend (in another state) and used her wireless internet without issues (though I couldn't tell you which router they were using). I've gone into our router's settings (with both my laptop and my roommate's) to reset the router or change the security settings, but with no real progress.
Here is my ifconfig results:
Code:
eth0 Link encap:Ethernet HWaddr 00:0f:b0:87:b3:80
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code].....
I recently did a clean install on my ASPIRE 5490G laptop with 9.10x64 and am having some odd problems with wireless.
The wireless will suddenly drop and ask me for re-authentication of the encryption key which I put in. Then it will ask me again. It will then refuse to connect to the router.
If I hit cancel then on the notification area the nm-applet will not have the router listed in the wireless networks .
If I kill the nm-applet and restart it with ALT-F2 and run nm-applet --sm-disable it still does not show the networks available.
I know it is not the router as my flatmate who I share with uses a laptop with Windows 7 and they have no problems.
I'm currently using putty on my laptop to control my headless server (both Ubuntu 8.04.) I'm running an rsync job that ran all night long and still going all day today so far. I need to restart my laptop, but if I do, I'll break the SSH connection. If I SSH back in, I won't see the same thing (rsync is showing me each file it's copying) that I'm seeing now. (At least I think that's true. Please correct me if I'm wrong.)
So I guess my questions are..Is there some way to restore my SSH session when reconnecting? (So I can resume seeing which file is being copied and - more importantly - when the rsync job (finally) finishes?If not, how else can I know when the rsync job finishes?
I updated Kubuntu from 8.10 to 9.04. After the update, I saw a problem with VPN connections. I am using an mac pro with 2 ethernet ports. Only one of them is connected to switch. I am using a static IP in my local network. The problem is that I lose dns information after connecting and disconnecting to a VPN by KVpns.As I am using static ip, I entered my dns server to resolv.conf file with "nameserver 192.168.128.4". My interfaces file is as follows:
auto lo
iface lo inet loopback
address 127.0.0.1
[code]....
Brand new to linux/ubuntu..Just downloaded the most recent version. Well when i try to connect to my network....it connects...then about 2 min later it disconnects and i have to unplug and replug my adapter.
Using a belkin usb wireless adapter.
I am new to Linux and just put Ubuntu on my pc when i am using Ubuntu my wireless keeps connecting and disconnecting. Im not sure what I am suppose to do.
My laptop is a Sony Vaio NW130J
The wireless card/driver is Intel WiFi link 5100 AGN
I dont know anything about Linux so if you could please explain it as easy as possible.
I installed ubuntu 10.04 a few days ago. And I am running into a few problems wherein my wireless network disconnects and prompts me again for password.
Even when I re-enter it (correctly of course) I cannot reconnect and I have to do a system restart. After the restart, the wireless stays connected but disconnects again after a while and I find myself stuck in this loop.
I do not know if the following is any help, but below I am producing the output of lspci command and a few log messages that I think maybe related to this problem
Here is the output of lspci command
And here are some messages that show up quite often in daemon.log
I have a MSI netbook, U100, on which I've installed Ubuntu 10.10. This keeps disconnecting from the network, though the applet shows me that the netbook found it. I mention that I have a wireless network and another laptop, with WIN 7, where I have no problems with the Internet connection. I also have a 3G USB modem, which let me connect without problem.
View 3 Replies View RelatedMy router is a Netgear router with Comcast, and after going on Ubuntu for a couple hours just doing normal things, the Internet disconnects. Then I have to restart my computer and start everything over again. I check the router and everything seems to be fine, I even unplug everything on the router first (like I am instructed to do so if this sort of thing happens) to make sure that's not what is causing the problem. It has to be the Ubuntu system.
View 4 Replies View RelatedI just bought a new laptop. This one came with win7 home. The wireless works perfect. Today I installed ubuntu 10.4 next to windows. I made a first connection which went easy. But after 30 seconds it disconnects. Then it tries 30 seconds to reconnect. It reconnects and after 30 secodns or so, it disconnects again. It keeps doing this all the time on ubuntu while on windows it works without any problems. This is what sais under the device manager for my wirelesscard stuff:
Intel(R) WiFi 1000 BGN
Microsoft Virtual WiFi Miniport Adapter #2
Microsoft Virtual WiFi Miniport Adapter
Realtek PCIe GBE Family Controller
[Code]...
I'm finding my wireless connection is disconnecting alot, I never had this problem when I was runnning windows 7. I have tried running wicd client but found it was doing the same, then uninstalled the normal network manager and tried just using wicd but it kept saying bad password and wouldnt connect at all. Even though it would work fine but disconnect alot when i still had network manager on.
View 2 Replies View RelatedHere is my problem:
I can reconnect to internet after disconnecting (this happens every 3-4 hours) only if I manually poke out and in ethernet cable to network adapter or reboot ubuntu. Even restarting network-manager not helps. My provider provides internet over pppoe. I have "DSL-connection 1" item in network managers gui menu. And that item disappears after disconnection.
pppd runs with following arguments: lcp-echo-failure 3 lcp-echo-interval 20 So where can I change this parameters, where is that configuration file?