i installed ubuntu 10.10 remix netbook edition on hp mini 110 last day. my wifi is working fine its connecting every network only problem is it cant keep its connection constant, i mean it keep disconnecting frequently. once it disconnect i tried to connect again but it connects but i can not surf internet.
View 1 RepliesMy wireless connection drops after a while when downloading torrents. I have to reconnect manually. Current configuration is Macbook Pro 5.5 with Broadcom card and Lucid. I've tried with Transmission and KTorrent. It's not a network problem as my Win laptop works smoothly and with higher transfers rates (i.e. 1MB/s in Win vs. 300KB/s at most in Ubuntu).
View 7 Replies View RelatedWireless connects fine, then disconnects regularly. I thought it might be an issue with the rt2870sta driver, so I blacklisted it, and it uses rt2800usb now:
Code:
[ 13.625932] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.633139] usbcore: registered new interface driver rt2870
[Code]...
I have a tenda wireless adaptor running on 11.04 natty. The USB id is: 148F 3070
Using the already installed drivers rt2800usb it can connect to all 13 channels but is very flaky, transfers slowing and stopping regularly. The rt2870sta driver is a lot more stable, but it will only connect to channels 1-11, but I need to use channel 13 due to massive wifi congestion on other channels...
I've tried iwpriv but it says there are no ioctls for the device.
Is there any way to get the installed driver rt2870sta to scan and connect to channel 13?
I've also tried to install the latest drivers from the ralink website: rt2870sta says it can see all 14 channels, but fails to scan. I also tried rt3070 driver but I cannot insmod as there are errors...
I am in kolkata zone, just bought the 3g sim and teracom-lw272 device. The problem is, its not activating regularly(its detecting, but some time, after Network Manager starts working, its failing ), and once its failed to get enabled, its unmounting the device all together....so i have to physically detach the usb device and reinsert. I have installed a rpm file that installed a script VKGEther....a small script file...but nothin else. Also, speed is very little(in [URL], it shows 0.1Mbps d/l speed) here some more info:
[Code]...
With Fedora 11, I got NetworkManager, and it never worked right.. Right now, the nm-applet crashes regularly, no message nothing, just disappears from the panel. I wrote a two-liner to run it in an infinite loop. But my wifi also disconnects every 10 minutes. It's like clockwork, it just disconnects. I see things about "error 38" in the logs. I tried downgrading, upgrading, nothing helped.
[Code].....
Wifi seems to disconnect fairly requently, sometimes reconnecting automatically and sometimes requiring me to re-enter the wep password.
I would like to make it so it stays connected.
The router is not very close, but I think it's close enough. I even moved it closer. Other devices (such as my N900 mobile phone) hold the connection without issue.
One complication is that there are several devices all with the same SSID, though there should be one which is clearly stonger.
Details below.
1 ) Machine Brand and Model (PC/Laptop):
Code:
2 ) Wireless Brand, Model and Wireless Chipset:
Code:
3 ) check interface:
Code:
4 ) Check for modules:
Code:
5 ) Kernel boot messages
Code:
I never had this problem with Ubuntu before and I am now confused. This is a clean install and I have not change anything about my AP so don't why this is happening.
Every 5min or so my wifi keeps disconnecting and sometimes have problems reconnecting. I also have Windows on this machine and it does not do this at all. My AP is set to channel 9(changing it makes no difference), WPA2. Logs below
Code:
[ 15.668746] alloc irq_desc for 33 on node -1
[ 15.668748] alloc kstat_irqs on node -1
[ 15.668768] iwlagn 0000:02:00.0: irq 33 for MSI/MSI-X
[ 15.696615] alloc irq_desc for 22 on node -1
[Code].....
I have recently purchased a cellular usb modem, a ZTE MF637. To my surprise and pleasure the device worked (almost) out of the box (almost, because I had to supply a user name and password to the wireless broadband connection properties).
Anyway, the problem is, that the connection work fine, but only for 20 minutes or so (I did not actually measure it), then I experience 0 network activity, and shortly after that the connection drops, and the device is no longer recognized as wireless broadband.
What I do is remove the device, replug it, and after a minute it reconnects. until the next drop.
I'm using Lucid on an Asus eee 1101HA.
Oh, one more thing, in lsusb, the device is listed as MF636, but the box reads MF637. I don't know if it matters, but there it is.
I have always had trouble in the past getting wireless adapters and what not to start working on Ubuntu but with each 6-month upgrade most problems are fixed while new ones are made. Since Ubuntu 10.10 just came out I thought I'd give it a go and test it with my hardware.
Before 10.10 Ubuntu could not connect with my wireless device and I had to do many things with gedit and such to get it working. After I have upgraded to 10.10 Ubuntu now recognizes my wireless device and network and I can search the web...but wait here it comes.
Literally minutes after a fresh install and first connection to my network my wireless signal will drop and prompt me to reconnect. Of course the first thing comes to mind I reconnect which doesn't work so I unplug the device and replug it making it works...Two minutes later my connection drops again and so I so reboot, and if you really want to know what happens next just restart this paragraph.
Things you need to know Operating System - Ubuntu 10.10 64-Bit Wireless Adapter - Hawking HWUN3 Hi-Gain Wireless-N Network USB Adapter Router - Apple Airport (99% sure it has all updates)
When you access the VPN service gives this error below.
daemon.log
Code:
I have a Toshiba Satellite M55-S325 (as it came from the factory, no mods), a Linksys WRT54G router, and Ubuntu 9.10/Karmic with all updates. I've had issues since I upgraded from 9.04/Jaunty to 9.10/Karmic. It did work for awhile (I think a few days), but then it suddenly just couldn't find our wireless network. I reformatted (with 9.10) thinking it had just been a bad install - now I can connect to our network, but it throws me off every two minutes. My roommate (Dell laptop, Vista) has no problems with the internet, and I've visited a friend (in another state) and used her wireless internet without issues (though I couldn't tell you which router they were using). I've gone into our router's settings (with both my laptop and my roommate's) to reset the router or change the security settings, but with no real progress.
Here is my ifconfig results:
Code:
eth0 Link encap:Ethernet HWaddr 00:0f:b0:87:b3:80
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code].....
I recently did a clean install on my ASPIRE 5490G laptop with 9.10x64 and am having some odd problems with wireless.
The wireless will suddenly drop and ask me for re-authentication of the encryption key which I put in. Then it will ask me again. It will then refuse to connect to the router.
If I hit cancel then on the notification area the nm-applet will not have the router listed in the wireless networks .
If I kill the nm-applet and restart it with ALT-F2 and run nm-applet --sm-disable it still does not show the networks available.
I know it is not the router as my flatmate who I share with uses a laptop with Windows 7 and they have no problems.
I'm currently using putty on my laptop to control my headless server (both Ubuntu 8.04.) I'm running an rsync job that ran all night long and still going all day today so far. I need to restart my laptop, but if I do, I'll break the SSH connection. If I SSH back in, I won't see the same thing (rsync is showing me each file it's copying) that I'm seeing now. (At least I think that's true. Please correct me if I'm wrong.)
So I guess my questions are..Is there some way to restore my SSH session when reconnecting? (So I can resume seeing which file is being copied and - more importantly - when the rsync job (finally) finishes?If not, how else can I know when the rsync job finishes?
I updated Kubuntu from 8.10 to 9.04. After the update, I saw a problem with VPN connections. I am using an mac pro with 2 ethernet ports. Only one of them is connected to switch. I am using a static IP in my local network. The problem is that I lose dns information after connecting and disconnecting to a VPN by KVpns.As I am using static ip, I entered my dns server to resolv.conf file with "nameserver 192.168.128.4". My interfaces file is as follows:
auto lo
iface lo inet loopback
address 127.0.0.1
[code]....
Brand new to linux/ubuntu..Just downloaded the most recent version. Well when i try to connect to my network....it connects...then about 2 min later it disconnects and i have to unplug and replug my adapter.
Using a belkin usb wireless adapter.
I am new to Linux and just put Ubuntu on my pc when i am using Ubuntu my wireless keeps connecting and disconnecting. Im not sure what I am suppose to do.
My laptop is a Sony Vaio NW130J
The wireless card/driver is Intel WiFi link 5100 AGN
I dont know anything about Linux so if you could please explain it as easy as possible.
I installed ubuntu 10.04 a few days ago. And I am running into a few problems wherein my wireless network disconnects and prompts me again for password.
Even when I re-enter it (correctly of course) I cannot reconnect and I have to do a system restart. After the restart, the wireless stays connected but disconnects again after a while and I find myself stuck in this loop.
I do not know if the following is any help, but below I am producing the output of lspci command and a few log messages that I think maybe related to this problem
Here is the output of lspci command
And here are some messages that show up quite often in daemon.log
I installed 10.10 for some days ago, networking was working smooth back then. I use a ethernet cable to connect to the internet.But yesterday when I installed 10.10 on my brothers laptop(he connects through wireless), I began to get these disconnects and reconnects.They just seem to happen random.
View 2 Replies View RelatedI have a MSI netbook, U100, on which I've installed Ubuntu 10.10. This keeps disconnecting from the network, though the applet shows me that the netbook found it. I mention that I have a wireless network and another laptop, with WIN 7, where I have no problems with the Internet connection. I also have a 3G USB modem, which let me connect without problem.
View 3 Replies View RelatedMy router is a Netgear router with Comcast, and after going on Ubuntu for a couple hours just doing normal things, the Internet disconnects. Then I have to restart my computer and start everything over again. I check the router and everything seems to be fine, I even unplug everything on the router first (like I am instructed to do so if this sort of thing happens) to make sure that's not what is causing the problem. It has to be the Ubuntu system.
View 4 Replies View RelatedI just bought a new laptop. This one came with win7 home. The wireless works perfect. Today I installed ubuntu 10.4 next to windows. I made a first connection which went easy. But after 30 seconds it disconnects. Then it tries 30 seconds to reconnect. It reconnects and after 30 secodns or so, it disconnects again. It keeps doing this all the time on ubuntu while on windows it works without any problems. This is what sais under the device manager for my wirelesscard stuff:
Intel(R) WiFi 1000 BGN
Microsoft Virtual WiFi Miniport Adapter #2
Microsoft Virtual WiFi Miniport Adapter
Realtek PCIe GBE Family Controller
[Code]...
I'm finding my wireless connection is disconnecting alot, I never had this problem when I was runnning windows 7. I have tried running wicd client but found it was doing the same, then uninstalled the normal network manager and tried just using wicd but it kept saying bad password and wouldnt connect at all. Even though it would work fine but disconnect alot when i still had network manager on.
View 2 Replies View RelatedHere is my problem:
I can reconnect to internet after disconnecting (this happens every 3-4 hours) only if I manually poke out and in ethernet cable to network adapter or reboot ubuntu. Even restarting network-manager not helps. My provider provides internet over pppoe. I have "DSL-connection 1" item in network managers gui menu. And that item disappears after disconnection.
pppd runs with following arguments: lcp-echo-failure 3 lcp-echo-interval 20 So where can I change this parameters, where is that configuration file?
My wireless card disconnects frequently and sometimes it won't even connect at all. I've googled the card and the driver and it looks like others are having similar issues as well. [url]-[url]
My lspci | grep -i network is as follows
Code:
Under iwconfig, it's identified as wlan0, and I'm running kernel x86_64 2.6.32.9
I'm using Ubuntu 10.04 32 bits and a Realtek 8185 wireless card. The card worked perfectly fine with WPA for a long time in Windows 7, but on Ubuntu I'm having problems. Using it without installing anything else makes it work for a very short time. It disconnects after a while and I have no other choice but to restart the computer.
Using windows drivers and ndiswrapper doesn't work at all (in fact it makes things worse because it stops recognizing my card at all). Using the linux drivers from Realtek's website is what works the best so far. I had to compile them and install them. But it still disconnects after a few hours if I'm using WEP (and only after a few minutes if I'm using WPA). I looked at other people with 8185 problems in this forum but their solutions didn't work for me.
I'm running Ubuntu 10.04 64bit on a 15' Dell Studio After doing an update my internal wireless will not connect to my wireless network. The card is on, I can see networks around me, but it will not connect to mine. It just acts like its connecting and then disconnects.
View 4 Replies View RelatedIts been like this since fedora 12, in fedora 11 its no problem, i hope it will be fixed in fedora 13 and i am waiting..., and after fedora 13 released the problem is still the same...
I use Intel 3945ABG. wifi connect with no problem and after few seconds its disconnected, and re-asking my saved password (which is stupid since i save the password so fedora won't ask me that stupid question again).
Need help, ubuntu keeps connecting and disconnecting to my wireless router. whenever i am able to get it to connect for a significant amount of time, i still have no access to the internet.
using ubuntu 10.04
using Linksys router, not sure what model but can find out.
using toshiba satellite laptop
I am able to access my router and internet in Windows without any problem
dont have anything of importance on ubuntu install, so i could reinstall but would rather not so that i could fix this problem in the future.
I'm using Mobile Broadband Connection (Huawei 180), When I plugin my RJ45 Ethernet cable, my Broadband connection is no more. I have no access to Internet. why it happens and How can i establish both connections @ once..?
View 1 Replies View Related