Ubuntu Networking :: Ethernet AC Outlet
Sep 11, 2010
Since it seems that it will take a while for Linux to get reliable wireless, I've been looking at that Ethernet AC Outlet as a possible solution. I'm hoping it's an all hardware solution (my ethernet works fine). However the vendors, if they list any OS at all, never list Linux.Has anyone had any experience with these?
View 9 Replies
ADVERTISEMENT
Oct 20, 2010
Is there a way to monitor a wall outlet with nagios.I want to check if we got some power out of a wall outlet.This is to check whether we are running on the electricity network or on our diesel power generator.The wall outlet is connected only to the electricity network, so if there is no more power coming out of the outlet that mean that we are running on the diesel power generator.
View 2 Replies
View Related
Sep 1, 2011
My laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?
View 4 Replies
View Related
Mar 1, 2010
Im trying to make an ubuntu server box my entrypoint to my networking. Meaning itll function as a server, a firewall, and a gateway. so i already installed dhcp3 and a dns server.
I have 2 ethernet cards in it. So now i wonder, should i the second card into a router's modem/wan port and make the router a switch? or should i plug it into one of the routers lan ports?
View 3 Replies
View Related
Apr 18, 2011
I have a server with two ethernet ports. I configured eth0 to be static, set at 10.1.10.148. I plugged in another router into the other ethernet port in order to configure that router. I configured eth1 to use dhcp. Using /etc/network/interfaces rather than gnome network manager. When I did this, I lost internet connectivity (internet routes through eth0 of course)
- Why did I lose internet connectivity?
In order to recover internet activity, I had to disconnect the new router on eth1 of course, and do sudo ifdown eth1. That wasn't enough however. After rebooting numerous times and pulling out my hair, I finally tried configuring eth0 as dhcp, rather than static, and this fixed the problem.
- Why didn't sudo ifdown eth1 solve the problem? What information was saved between reboots that somehow remembered that I plugged in the new router? Because my thinking was if /etc/network/interfaces was identical, and the network topology was identical, after a reboot everything should be restored, but it wasn't.
View 7 Replies
View Related
Feb 8, 2011
I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.
DSL-->1sr Eth --> 2nd Eth (currently works)
DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)
The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).
View 2 Replies
View Related
Apr 4, 2010
how to use a ethernet conenction(Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller )in ubuntu...my internet requires user name and password ..can u even tell me how to config the user name and password
View 3 Replies
View Related
May 11, 2010
I installed 10.04 today, and I can't get any connection through the LAN. I've tried some stuff on my own, but I've been unsuccessful so far. It's not a hardware or connection issue, as it works perfectly fine in Windows 7. I haven't had this issue in any previous version of Ubuntu (or any Linux distro for that matter).The weirdest part is I booted from the installation CD as as LiveCD, and everything worked perfectly fine. It only stops working after I actually install it. Here's the results of ifconfig:
eth0 Link encap:Ethernet HWaddr 00:17:31:d8:d5:76
inet6 addr: fe80::217:31ff:fed8:d576/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 6 Replies
View Related
Jun 5, 2010
i was instelling ubuntu 8.10 on my laptop type HP (nx6110) but the Ethernet and the wireless are not work. i was used the nm-tool on terminal the code is
zaid@zaid-laptop:~$ nm-tool
NetworkManager Tool
State: disconnected
- Device: eth0 ----------------------------------------------------------------
Type: Wired
[Code]....
View 7 Replies
View Related
Jul 9, 2010
I just installed 10.04 on a Dell C800 and I've been trying to connect to the internet via Ethernet with no avail. I did some searching and ran lspci -nn and got this:
user@user-desktop:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub [8086:1130] (rev 02)
[code]....
View 1 Replies
View Related
Oct 17, 2010
I have been using Ubuntu for quite a while now (~3 years.) I recently installed 10.10 on an HP Mini 1000. The installation went fine, but now I am puzzling over how to connect to the internet. When I plug an ethernet cable into the netbook, the port light lights up, but the system does absolutely nothing. Under the connections menu on the top panel, it just says disconnected. Also, the wireless connection section states that the device is not ready because firmware is not installed. Most solutions I see for problems of this kind are to download the drivers, but I cannot do that because neither connection works.
View 1 Replies
View Related
Apr 1, 2011
I have a dual boot netbook (Acer Aspire One D255) with Mint and Ubuntu 10.4. Using Mint, I was able to connect via the ethernet and install all updates including wireless driver.
In Ubuntu 10.4, regardless of what I do, I cannot connect via ethernet cable at home and at work.
How can I locate the right wireless driver? In the past, I have always been able to simply plug in the ethernet cable and get the necessary updates.
View 9 Replies
View Related
Jul 13, 2011
i'm a beginner with ubuntu and i installed 11.04 yesterday (so not yet familiar with the new desktop configuration). Also, I have the french version so i'll do my best to translate the terms in english. I have a major problem: i can't connect to internet by ethernet cable or by wireless. The network icon is always empty. It doesn't detect the ethernet cable and the wireless networks around. I've tried different things i found on forums. I'v reinstalled the b43 package and rebooted. At the beginning i was only having problem with the wireless; i could connect via ethernet. But on one forum, a dude suggested the command
[Code]...
View 3 Replies
View Related
Sep 1, 2011
In 10.04 I get the following error in the log while connecting to ethernet:
Code:
Aug 24 17:33:24 Linux dnsmasq[11069]: started, version 2.52 cachesize 150
Aug 24 17:33:24 Linux dnsmasq[11069]: compile time options: IPv6 GNU-getopt DBus I18N DHCP TFTP
Aug 24 17:33:24 Linux dnsmasq-dhcp[11069]: DHCP, IP range 10.42.43.10 -- 10.42.43.100, lease time 1h
Aug 24 17:33:24 Linux dnsmasq[11069]: no servers found in /etc/resolv.conf, will retry
Aug 24 17:33:24 Linux dnsmasq[11069]: cleared cache /etc/resolv.conf only has "Generated by NetworkManager" comment, so is this a bug in Networkmanager?
View 5 Replies
View Related
Feb 13, 2010
i shut down my ubuntu karmic for a bit. turned it back on after an hour or so and now i have no network connection. i checked all the obvious things like cords etc wife's computer is connected through the same router / modem and no probs here.i even replaced the card in mine.
View 9 Replies
View Related
Feb 14, 2010
I have an Asrock A330GC, with onboard ethernet, and an Engenius PCI card for wifi.I installed ubuntu server 9.10 no problems, and it picked up my ethernet in the installation with no difficulties.I couldn't get 9.10 to do what i wanted, so I tried installing 8.4 instead. This however didn't pick up any of the drivers, so i couldn't get online.So i reinstalled 9.10, only to find that no couldn't find network in the installation.Absolutely NOTHING has changed, the ethernet cable still plugged in, and if i plug same cable into my laptop, it works fine.Any ideas people?ifconfig doesn't mention any eth0, just lo, with an ip of 127.0.0.1 and amask of 255.0.0.0 which i'm fairly certain means its dead
View 1 Replies
View Related
Mar 9, 2010
I'm kinda new to this, but is there any way to send out power-over-ethernet from the Ethernet port on my computer?
View 2 Replies
View Related
Apr 26, 2010
My computer needs the boot option "noapic". Unfortunately the Ethernet doesn't work. It does work when I use the boot options "noapic acpi=off" but the printer that is connected via a parallel port does not work. Also I have to push the power button the system is shutting down with this option.
Output of lspci:
Quote:
View 1 Replies
View Related
May 3, 2010
I just upgraded to 10.04. I had wireless connection for 1 day and now nothing. No ethernet connection either. I CAN use both wireless and ethernet using my machine on Windows.....so the connection stuff does work. Here's the output of of the commands I got from the "sticky". I can't display the output as this forum puts it all together as one continuous sentence with no line break!
View 9 Replies
View Related
Jun 6, 2010
I'm trying to set up a shared Internet connection that had been broken by a previous update, I believe. Eth0 is connected to the Internet, whereas eth2 should be the connection going to my Roku set-top box. Under the nm-applet icon, an entry exists for "Auto eth0" for the first card, but there is nothing under the second card except "disconnected". How do I make a connection entry under my eth2 card so that I can share my Internet connection with my Roku box?
View 6 Replies
View Related
Jun 14, 2010
The motherboard is an L7VMM2 Rev 1.1Initially everything was running smoothly, then I brought it upstairs and everything just failed. The computer would hang right before the POST memory check, and after a few reboots it would do the memory check and reboot. So, I opened it up and switched the RAM around thinking it may have been a BIOS bug or a loos connection and it seemed to work. Now it boots into 10.04 perfectly and is blazing fast for an old computer. THe only problem now is that according to ubuntu, my ethernet controller is non-existent. It doesn't show up in lspci, dmesg and the only thing in ifconfig is the lo interface. It will however recognize the USB interfaces. I upgraded to linux 2.6.2.32-22-generic #33 but that didn't help the issue any. Now I'm stuck, and running out of ideas
View 2 Replies
View Related
Jul 14, 2010
I have a Toshiba Satellite L645D-S4030 running on Ubuntu 10.04. When I plug an ethernet cable into the ethernet port, simply nothing happens, and when I try to connect to my wireless network, it connects but there is no actual internet available. I'm sure the wireless works as I'm on an older model Toshiba Satellite and it connects fine (running Ubuntu 10.04 as well.) I tried to follow the procedure in the stickied thread, so when I type in these commands, here's what shows up:
Lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
[code].....
View 9 Replies
View Related
Sep 10, 2010
I have never been able to use any network connection on my Vaio except wireless. In many places (hotels, usually) where there are wired connections I get nothing. Whereas with another Vaio I have owned with UbuntuLL also it work just fine.
I have 1gig RAM and 10.4 installed with all updates. Is there a way to test the ethernet part of the computer?
View 1 Replies
View Related
Sep 11, 2010
I am trying to get this laptop`s wireless to connect to my router or any wireless connection. It does not have an ethernet port,so it has been tough.I have been reading everything i can,but cant get it to work.Maybe I need a different wireless card or a usb adapter.The one I have is a Texas Intruments acx100.Can anyone tell me if this should work.I have ndiswrapper installed and the windows driver for it but still nothing.
View 4 Replies
View Related
Oct 22, 2010
I recently moved to a student dorm in my university (RWTH Aachen) and I have an ethernet connection from my room. The thing is that I can't connect to the internet, I don't get any IP through DHCP. I tried using wicd instead of network-manager, and doing it manually with dhclient. None of those worked (actually I don't know much about how networking works so maybe I didn't do it well with dhclient). The weird thing is that Windows 7 gets the IP instantly and I can connect to the internet from windows. But I don't know why Ubuntu refuses to get an IP. Info from lshw, lspci:
lspci
Code:
sudo lspci -vv
02:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 4380 (rev 10)
Subsystem: Sony Corporation Device 905e
[Code].....
View 9 Replies
View Related
Oct 26, 2010
I installed 10.10 for some days ago, networking was working smooth back then. I use a ethernet cable to connect to the internet.But yesterday when I installed 10.10 on my brothers laptop(he connects through wireless), I began to get these disconnects and reconnects.They just seem to happen random.
View 2 Replies
View Related
Dec 3, 2010
I have brought a new DELL INSPIRON 1410. I installed ubuntu 10.04 but my ethernet card is not getting detected where as in windows 7 is working..
View 2 Replies
View Related
Jan 11, 2011
I have two computers, a laptop and a workstation, both running linux (Ubuntu and Fedora).For some reasons, it's handier for me to work from the laptop, accessing the workstation only from remote.At present, I have to connect to the workstation using a very complicated system that implies VPN + ssh passing through the internet. It works, but it would be far easier and faster if I could set up a direct connection between the two computers. Unfortunately, I can't use the ethernet ports or wi-fi (it's a long story why, but I really can't).I own a usb data transfer cable, but I don't know how to use it.
View 1 Replies
View Related
Apr 8, 2011
My first one is the network: Our routers' ethernet ports are all in use and I cant get one of them. So Im asking you what I need to buy. Our router now is a speedport w701v. The new router should have wlan and good working LAN. It shouldnt be very expensive... give me some tips what I should look for (because Im very new with router...) and maybe give me a link where they tested many routers (and where I can trust the results).
View 3 Replies
View Related
Apr 27, 2011
I've been doing some reading and I cannot work out why I'm having this problem. My 32-bit Ubuntu Server running 10.10 has a Realtek RTL8111 ethernet card which supports up to 1000mbps. However, when I run sudo ethtool eth0 I get:
Code:
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
[Code]....
After running sudo ethtool -s 1000 to try and change speed to 1000mbps, the output is still the same as before. Why is this :S?
View 9 Replies
View Related