Ubuntu Networking :: Disable Prompt For PUK / PIN For Broadband Wireless At Startup?
Jan 13, 2011
I've looked quite a bit, but didn't find an answer.
I have a Thinkpad x61s which comes with a "Sierra Wireless Mini Card module".
When I start up my computer, I get prompted for a PUK / PIN.
"Unlocking SIM PUK required" (sorry, this is a direct translation of the French, might not be the exact same words in English)
With three fields to fill:
Code PUK
New PIN Code
Reenter new PIN Code.
I don't have a card in my computer, and broadband mobile is not activated in networkmanager.
Does anyone have an idea how I can disable this prompt (I don't intend to put in a SIM card before some time).
View 3 Replies
ADVERTISEMENT
Jun 21, 2010
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies
View Related
Dec 17, 2010
I've recently installed Ubuntu 10.10 on my laptop -- clean HD, no other partitions.
(It's odd, though; when I go to System -> About Ubuntu, it tells me I have version 11.04 Natty Narwhal.)
Anyhow, when switching on my laptop, a short drumming sound effect can be heard when the login prompt appears on the GUI.
There are numerous threads on the Internet explaining various methods to disable this. I have done everything as instructed in these threads to no avail, including:
1) System -> Administration -> Login Screen -> Unlock -> [enter password] -> make sure "Play login sound" is unchecked (it was already) -> Close
2) System -> Preferences -> Startup Applications -> uncheck "Gnome Login Sound" -> Close
3) System -> Preferences -> Sound -> Sound Effects -> Alert volume -> check "Mute" -> Sound theme -> No sounds -> Close
It's foolproof, really. Nevertheless, when restarting the computer, the drum sound is heard again at the login prompt.
I realize I can simply find and delete the sound files, but isn't that a bit harsh? Surely there must be a more elegant way to silence the login.
View 3 Replies
View Related
Dec 22, 2010
I've been using Debian since the early days of Lenny being testing as OS on the same Computer. Its a Acer Aspire Notebook with switches for wireless and bluetooth. While booting Lenny my wireless and bluetooth stayed off as long as I didn't switch them on. But since squeeze they get activated ( you can see it by looking at the LED's ) the moment after the grub screen. I now do have to turn bluetooth and wireless off by hand everytime which is quite annoying since I mostly use eth0.
how to disable bluetooth and wireless per default in a way I can simply turn them back on by using the switch?
View 5 Replies
View Related
Apr 8, 2010
I have cricket wireless broadband and the starcom um100 usb stick. It reconized it when I first put it in and was able to set it up. I connect to the internet and I am able to go to one or two pages before it freezes on me.
I ran the lshw -C network code and this is what I got it doesnt see my wireless
When I connect my wireless it does see it when I ran the lsusb code ( it didn't see it before when I didn't have it connected)
Here are some screen shots of what I got when I ran these codes:
View 5 Replies
View Related
Jun 26, 2010
I have an old Linksys WUSB54G USB wireless card lying around, and occasionally I like to use it as an access point for my laptop. For assigning IP addresses I use dhcp3-server. The only problem is that the server attempts to start itself up on boot, which I do not want- I want to start it up manually if I need it. how to disable this service on boot?
View 9 Replies
View Related
Jul 25, 2010
May I ask if I can share my mobile broadband connection via Wifi?
View 2 Replies
View Related
Mar 27, 2010
Using my usb mobile broadband dongle I am able to access the internet about 25% of the time. I am able to make a connection to the '3' wireless network 100% of the time, but often Mozilla and all other applications that rely on an internet connection do not recognise that this connection has been successfully established, and give me error messages claiming there is no internet connection.
I can't discern any pattern as to whether the connection will be recognised or not. When it isn't recognised, the only solution is to disconnect and reconnect to the network. Sometimes this works and sometimes it doesn't. Sometimes restarting the computer fixes the problem, and sometimes it doesn't. I also have access to a wireless network at uni. I have no problems using this network whatsoever. Housemates using the same dongle on Windows have no problems. I'm using an Acer Aspire one, the dongle is a Huawei e220, I'm running Ubuntu 9.10. I have only recently reinstalled the operating system and have not needed to mess around with any network settings to get the usb dongle to 'work' the way it is currently.
View 1 Replies
View Related
Jun 7, 2010
I've just completed switching both my laptop and desktop from Ubuntu 10.04 to Kubuntu 10.04, all seems to be working well, except that I can't get my Virgin Mobile HUAWEI E160E wireless broadband modem working. I used to have it working flawlessly in Ubuntu, I've used the smae step as described in this post: [URL] that worked for me with Ubuntu, but the Wireless Broadband tab is greyed out under the manage connections dialog. I'm running the 64-bit version of Kubuntu BTW.
View 2 Replies
View Related
Jun 26, 2010
I am deployed to Iraq and the Earthlink ISP here uses PPPoE to configure a connection to their wireless broadband. His english skills are pretty good and from what I gather, he's got a DSL connection that he's trying to connect me to. He showed me how he does it on a Windows machine but I can't figure it out on my ubuntu laptop. That windows machine didn't need any IP addresses or server names. It only used a username and password to connect. Of course a strong wireless signal detected was also pre-requisite.
I know my laptop works because I've had great success with it here lately, just not on the Earthlink service.I see their wireless is broadcast and I can connect to it. I just can't figure out how to post my credentials and authenticate.I don't see a way of entering my username and password because I don't know how to install (or configure) for PPPoE.I did use the pppoeconfig and got to the part where I add my username and password, but most of what's going on up to and after that, I do not have the knowledge base to use. So I figured that allowing the defaults and recommended settings would be acceptableYou'll have to forgive me if I've asked another dumb question here. I'm another one of those Linux enthusiasts who is learning and I'm just not willing to switch back to MS just to get internet while deployed.
View 1 Replies
View Related
Jan 18, 2011
I had previously been sharing my ethernet connection over wireless using Hostapd & dnsmasq on my headless server as this tutorial shows: here which had been working fine. I now wish to share my USB mobile broadband over the wireless. I using a ZTE MF112. I was able to get the connection working using the application wvdial.
- Firstly I had to create a hard link between /dev/gsmodem & /dev/modem
- wvdial then made a new connection ppp0 which would work for internet access.
Changing the interfaces to have the br0 port like so:
Code:
iface br0 inet static
address 192.168.1.1
network 192.168.1.0
netmask 255.255.255.0
broadcast 192.168.1.255
bridge-ports eth1 ppp0 wlan0
Flushing the IPTables & then adding:
Code:
iptables -A FORWARD -i br0 -s 192.168.1.0/255.255.255.0 -j ACCEPT
iptables -A FORWARD -i ppp0 -d 192.168.1.0/255.255.255.0 -j ACCEPT
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
Doing so works fine, but I'm not entirely sure how to make this all automated. I could try making a script to launch, but I don't have a huge amount of experience writing scripts. Is wvdial the best application to use? Keeping in mind I'm using a headless server. I use Squeezebox server & the scrobbling didn't seem to be able to connect to last.fm. Do I need to specify which connection Squeezebox uses?
View 2 Replies
View Related
Aug 3, 2009
I am trying to use my air card (Sprint U760), which works under Windows, on CentOS 5. I have a manual from Sprint that has instructions but I am having trouble with installing required PPP packages. The Sprint instructions say to go to Add/Remove Software and download packages KPPP and KPPPLogView. However, these packages do not appear in the list of available packages. I do have a working hard wired connection to the internet while I am get the air card working.
View 7 Replies
View Related
Feb 2, 2010
I just got a new Asus Eee 1001P, and the wireless isn't working at all. I had an Asus EEE 1005HA before that and since both use the AR8132 network card I hoped it would be the same problem as with that, where installing the backports fixed the problem. However, that doesn't do anything. With the 1005HA the connection was only flaky and disconnected a lot, but the 1001P doesn't find any networks to connect to at all. Also, the mobile wireless will connect only once and after disconnecting every attempt to reconnect ends in that connection symbol spinning wildly until I tell the network manager to disconnect. On Kubuntu it doesn't even connect once.I never had that problem with the 1005.
Code:
$ lspci
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
02:00.0 Network controller: Atheros Communications Inc. Device 002c (rev 01)
[code]....
View 9 Replies
View Related
Mar 25, 2010
I am getting a prompt namely unlock keyring when i start up my PC and when i type in my password my wireless gets connected automatically... I didnt have this issue before.. My wireless onnection used to start up automatically when i start my PC...
View 4 Replies
View Related
May 22, 2011
lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
View 9 Replies
View Related
Jun 28, 2011
I have a Acer Aspire running dual boot Ubuntu 9.10 and Vista. Although it has an Atheros wireless card (AR5001 according to linux, AR5007 according to Vista) until recently I didn't have any apparent problems with it.I installed a ZTE MF112 Mobile Broadband Dongle. Now I am experiencing great difficulty in communicating with my wireless router (with both LAN and WAN traffic). Connecting to the network in the first place appears to happen quite smoothly and my computer obtains a DHCP IP address. However the ping response times are measurable in seconds rather than the milliseconds I would expect, and any traffic across the network crawls, or just times out and fails.
I do not believe it is the router at fault as two laptops, both also with Ubuntu, can connect to it fine and swapping it out for another router does not fix the problem either. Also there is no problem connecting from Vista.I suspect that installing the dongle has altered something which has made the bugs in the wireless card/drivers apparent and that's where I need some help.
View 2 Replies
View Related
Aug 4, 2009
I have a Sprint U760 air card that apparently works under Linux. Sprint has a guide: "Wireless Mobile Broadband Setup Guide for Linux OS" that I am using to setup the air card. When I go through the procedure in the manual for "Setting Up PPP Using KPPP" the last task is to query the modem to see if Linux recognizes it. When I do the query I get a response "unable to open modem". I have tried going back through the PPP setup but still get the same response.
View 8 Replies
View Related
May 7, 2010
How do I installed a sprint novatel 3g modem? I see sprint under the mobile broadband tab when I create a new connection, and it shows all the right information, but I never can connect.
View 1 Replies
View Related
Mar 30, 2011
I have internet access using mobile broadband and i also have a wireless network for home usage without internet access.
When my wireless network is connected every application in ubuntu (Meerkat) tries to use it for inernet access (as neededobviously). As soon as i disconnect from the wireless network (and assuming the mobile broadband is on) everything has access to the internet again using the mobile brodband.
How do i tell ubuntu that i don't want it to use my wireless network for internet access?
View 6 Replies
View Related
Mar 13, 2009
Is there an easy way (or even a hard way) to activate wireless network capability from the command prompt? I want to do this because I like to use the fvwm window manager, but I also like wireless! (In fvwm wireless networking doesn't start up automatically.)
I tried just starting the wireless by...
Code:
Despite the promising messages, wireless didn't work.
View 14 Replies
View Related
Jan 21, 2010
connect to a hidden wireless network from command prompt? The networks ESSID is "sh0mis"
View 5 Replies
View Related
Dec 9, 2010
How do you disable the keyring prompt in 10.04
View 1 Replies
View Related
May 11, 2011
I've had a host of problems since upgrading to 11.04 Natty Narwhal, so let's deal with these 1 at a time.
I've got a Hewlett-Packard Pavilion G60 laptop. Next to the power button is a handy wireless on/off button. This has always worked well with previous editions (9.04,through 10.10). first press toggles the wireless off, second press toggles it on.
Not so in 11.04. The toggle off works great, first time. But, it will not toggle back on. Not after any number of tries, not after restarting, not after booting into other OS's (9.10 and Vista) re-enabling it there and then booting back into Narwhal. to further complicate the issue, this feature bypass the network manager, so toggling the wireless off by the switch leaves me showing no wireless adapter in the network manager. I also restarted, switched from Unity to a Gnome session, but the issue still persists.
As my only network options are wireless, this has become a substantial inconvenience.
----
EDIT: so the network util is actually saying "wireless disabled by hardware switch". Also noticed it I enable it in 9.10, reboot to 11.04 (where I inevitably fail to re-enable it), then reboot into 9.10, it will initially be disabled. The key difference is in 9.10 I have the ability to enable wifi using the hardware button. It seems that 11.04 is remembering that wireless is disabled between boots. Is there a place it might be storing this value? If so, I may be able simply to set the value as enabled, since toggling that silly button isn't working.
-----
EDIT 2:
found this thread:"Wireless disabled by hardware switch" bug? - Natty
seems to be a similar issue. I'll be following how that one develops, too.
View 3 Replies
View Related
Jan 29, 2011
My wireless can connect to my router without a problem, but in order to do so (after boot) I must first disable networking in the Notification Area and then re-enable it. I don't mind it too much, but when other people use my computer, it's made painfully obvious to me, that this was never an issue with Windows 7 (as much as I despise MS).
View 9 Replies
View Related
Apr 2, 2010
Whenever I boot up my computer, Ubuntu (10.4) brings me to my desktop, then immediately displays a prompt to enter my login keyring. After some searching on the forums, it appears that this is because I set my laptop to auto-login. Am I missing something here, but what does auto-login have to do the the keyring? Why do I even need to enter that password? I understand that many Ubuntu users are picky about security, but why isn't their any option to disable this? It's almost as bad as UAC from Vista, which is one of the reasons I'm dual-booting Ubuntu in the first place. This is an annoying "problem" that has been bugging me since I first installed Ubuntu - how can I change it?
View 9 Replies
View Related
Sep 10, 2010
I configured my flash drive to be bootable using the gui startup disk creator, and it's working pretty well for me, but every time it boots, it pops up the dialog where you have two options, to use the live usb mode or to install. Is there any way to bypass that prompt and just go straight to the live usb mode?
View 4 Replies
View Related
Nov 12, 2010
I click on the corresponding checkbox in users and groups but but it doesn't do anything. I also want to disable password prompts in general. Also when I try using Computer Janitor it says it could not complete and to check if other package managers are open, but none are.
View 9 Replies
View Related
Feb 17, 2011
How do I disable showing Usernames? I want to be prompted for BOTH un and pw. If it is necessary I could just change it so that it boots into a fullscreen terminal so that you would have to input "startx" and then username and password. Or I could just change it through gui or 3rd party software.
View 7 Replies
View Related
Aug 23, 2011
Can I disable the password prompt after I come out of suspend. I remember a setting in the last release but I can't find it in 11.04. Is this setting still there? Where can I find it?
View 4 Replies
View Related
Jun 25, 2010
I don't get a UI login prompt at startup and it makes a sound. I'm using 10.04, though this did happen to me in 9.0x as well. When I press ctrl-alt-F1, I login and sudo gdm stop and do sudo startx this seems to put me at root and there is an error with the applets and the panel does not load. "Killall gnome-panel" does not fix it.
If I simply do startx (w/o going to root), it goes to a black screen and if I press ctrl-alt-F1 it repeats "No protocol specified" until I get the error message xinit: Resource file temporary unavailable (errno 11): unable to connect to Xserver.
View 1 Replies
View Related
