Every time I turn on my ubuntu box, it somehow kills our internet connection... yes, even through the router. The internet will not work until I call tech support and they run a line test. Then it works again as if by magic. I'm at a loss. A friend suggested maybe ubuntu is trying to establish itself as the dhcp server on the network? I have ubuntu 9.04, 32-bit, workstation.
View 2 RepliesI bought a wired broadband dsl router to provide another layer of security for my computer running ubuntu. I just plugged it in without installing any software etc. It blocks the internet connection.
View 3 Replies View RelatedWe just set up a password for our wireless router (D-link DIR-615). WPA personal. After doing that, I can no longer connect to the internet. I can connect to the wireless router, however. Same problem for the Apple Macs in the house. We called Dlink. The fix for a Mac was to add DNS servers (4.2.2.2) under TCP/IP But there doesn't seem to be anywhere to specify a DNS server in Ubuntu.
View 8 Replies View Relatedwhen I was still at my university room where the connection would work after a few reboots. After moving back home the connection worked on and off for a day before not working at all. NetworkManager is telling me that I am connected and have an ip address, etc, but nothing is able to get an internet connection. I am able to ping myself but am not able to ping my router. Everything works fine on M$ and other PC's on the network, it's just my ubuntu 10.04 that is playing up.
View 9 Replies View RelatedI have just installed Linux Mint 8 to an Asus A6000. My problem is that the computer won't connect with my wireless router. I have tried with MAC-adress and such, but still no respons. I also tried to connect with a cable to my modem, but no response there either.
I think I may lack some drivers, to what I think is Broadcom b43, but I am not sure. I tried to download the drivers on my other computer, and transfered them to the Asus. I managed to install 2/4 drivers, but on the two others, I get this message "Failed to fetch ... Couldn't reach archive.ubuntu.com"
I have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
View 9 Replies View RelatedI have internet access through 3G/4G USB dongle direct into my Ubuntu 10.04 box. Works great! Now I would like to share this connection out through my Netgear WGR614 wireless (and wired) router. Any clues? I've tried the simple (GUI) instructions using Network Manager, but just can't seem to get it right. Previously, I had DSL and this plugged nicely into the WGR614 and internet and ethernet access was had by all. Now, I'm a bit confused on how to get the sharing (ethernet and wireless) between my Ubuntu box and the wired/wireless network while at the same time getting Internet access to all through the Ubuntu box.
View 2 Replies View RelatedI have just recently installed Ubuntu 10.04 and I can't get the internet connection to work. I have found out that the wireless adapter that is pre-installed in my laptop (toshiba satellite A665) has been interfering with the main wireless.
The adapter Ubuntu is trying to use it my WiMAX local wireless adapter which is incorrect. My main wireless adapter is my Intel(R) Centrino(R) Advanced-N 6250 AGN which Ubuntu can't find.
I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
i have a routed and a PPPoE type internet connection, recently i tried a thing in terminal with the pppoeconf option since the network manager has problems with connectiong to the internet with a pppoe DLS connection, or anyway in my case it does not work. Ok i did the pppoeconf thing i inserted my pass and my user and left the program to do its thing, ok it all worked fine but then i restarted my system and suddenly the network manager did not want to recognize my network it hat as options some weird ipupdown options for connection and when i tried the pppoeconf thing again it did not work. what could i do to reactivate at least one way my connection, if i understood correctly the terminal type connecting and the network manager are two different things. now i am using my router and it should connect but the network manager still does not see the connection.
View 3 Replies View RelatedI cant get my wired internet connection to work. The command 'dpkg -s pppoeconf' returns ' installed ok installed'. My connection is through a router which is probably in a semi-bridge mode and I need to dial a connection to get the net started. The connection Auto eth0 is setup properly with the correct cloned MAC Address (that of my laptop).
I've also executed 'sudo pppoeconf' and ran the whole series of steps which towards the end said that my connection will be set on boot. However, the net doesnt work directly and I dont know how to dial manually either. 'sudo ifup eth0' returns 'interface eth0 already configured'. I tried some 10-15 threads but none worked. Ubuntu is handicapped without internet.
As of now, my internet works fine when connected with an ethernet cable.The problem is it doesnt seem like my wireless is working at all.The led light is orange, (its usually blue when it connects) and I cannot see my home dsl network.Is thereany specific troubleshooting steps I should take?HP dv6000 laptopwireless card: Broadcom Corporation BCM4311 802.11b/g WLAN
View 6 Replies View RelatedI have a mobile broadband usb modem that I get my internet connection from, and I would like to share this connection through a router that is connected to the same computer via ethernet. I'm running Ubuntu 9.10.
View 8 Replies View RelatedAfter i install it i lost my internet connection . i got a message " Wired Network " " you work offline ". i use cable ADSL ,.... my Pc information HP Pavilion 6700 running with both Window 7 & Ubuntu 10.10 note... my network connection work correctly on W7.
View 1 Replies View RelatedI am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
The problem isn't with thew new computer but with my computer running Ubuntu. The problem is that I'm having trouble getting the Internet to work. Before the router I just plug my PC straight into the modem but now with the router I can't get on the Internet. I can get a connection to the router but no Internet. I know the it is not the router because I use my PS3 and it worked fine. I spend like an hour just trying to get the connection but can't figure out the Internet problem. What I did to get the connection is copy the ip address, Mac, and etc. from the PS3. Then I made a new connection and put the data in the IPV4 settings and it got a connection but I'm not sure if I did that right or just got lucky
View 2 Replies View RelatedI'm trying to do a SSH connection between my home and work PC both machines are running ubuntu 10.04. I have read all the comunity documentation at [URL] from Work PC. I went on to the web site what is my ip address and noted down the number, From Home i opened a terminal and typed: pnig (ip address). to which their was no reply, now i'm assuming i need to configure the works router to except connection requests, is this Correct?
Also what information do i need from my works network and how do i get it? I understand that I need the routers expernal ip address, but how do i referiance a specified computer after that address? What program do i use in ubunu and how is that information applied to it?
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedI just installed Linux on a partition to my hard drive and now my wireless internet doesn't work.
View 2 Replies View RelatedI have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies View RelatedIts a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
I just changed my wireless connection over to wired and my computer claims it's connected but when I try to open and webpage (or even ping) it can't connect.
Keep in mind I am plugged directly into the router. Also I'm not sure if this is helpful but, I did have connection sharing for my xbox when I had wireless. I'm typing this on windows 7 which is driving me further into insanity by the minute.
My lan connection to my router isn't working i have it plugged in the cable is good ( fyi i do have some computer knowledge) So my wireless is working right when i booted up but my lan is not. i have a @#$^ i am afraid to say what it is lol dell with their integrated ethernet card. OS: ubuntu 10.04 everything works fine but the wired connection.
Dlink router with all of the settings made properly. i read somewhere about doing a whole bunch of stuff but i thought that since this was a higher version they would have that problem fixed. i also have aim or msn whichever is more preferred. i hopefully will be notified that someone has responded to this thread.
I am having problems connecting to my new router. It just does not appear in the list of connections under Network Manager. It is not a problem with my laptop's wireless adapter as I can connect to another wireless router. It is also not a problem with the router itself - my Nintendo Wii can pick it up over Wi-Fi and use it and that is further away from the router. It also works if I ethernet it straight into the laptop.The router was provided by Sky Broadband and is a D-Link, pretty standard type of ADSL router with four ethernet ports, wireless and telephone cable socket. I am using the default settings for the SSID and network key, as well as the encryption type (WPA).Ubuntu version = 10.04. The wireless adapter is a very standard issue onboard Intel device but as I say, I can connect to my old Belkin wireless router no problem.
View 1 Replies View Relatedubuntu recognizes the router im using that goes to my ps3 but for some reason i cant link the router to my internet connection.
View 1 Replies View Relatedi recently had to switch routers because my old one didnt work anymore. i have a dual boot machine with win7 for games and natty narwhal (64-bit) for everything else. i'm quite new to ubuntu, i know how to navigate the menu, change settings, install things, just the basic stuff. i dont know how to use the terminal yet except some basic commands for installing and updating software.
after my router swap, my connection for windows was back, although i had to pull out the network cable and plug it back in for this to happen. unfortunately my connection in ubuntu is still gone. i see the connection in network manager, but i cant access the internet through it. i tried setting up a new one with the same settings, to no avail. i connect to the internet directly through my router. i tried finding some documentation for it but havent had luck with that. is there some way to reset the connection? or let ubuntu set up a new one like when i'm doing a fresh install? i think that ubnuntu still thinks i'm using the old router and that this is the cause for the connection fail.
I'm still kind of a linux newb, so I might just be missing a little bit of knowledge here, but I've been having some real problems getting my machine to connect to my wireless network under Ubuntu 9.04.
Here are my basic specs:
Intel Pentium™ 4 CPU @2.66 GHz
1.5 GB RAM
3 HDDs: 1 40GB Maxtor internal, 1 320GB WD internal, 1 160GB Maxtor USB external.
OSes: Windows XP Home Edition (on Maxtor internal drive) Ubuntu 9.04 (on WD internal drive)
I don't think my video card would make any difference, so I won't list it on here...
Anyway, what happens is I try to connect (I select the network SSID from the pull-down list in the NetworkManager panel menu), and it seems to connect okay to the router, but I can't get out to the net. I can pull up a terminal and ping the router's address, but I get a "Destination Host Unreachable" message. It's as if, to the computer, the router isn't even there on that level, but it can still somehow connect to it.
Now, here's the strange part. If I reset the router from another (Windows) computer on the network (specifically, the one with a wired connection to it), then I can connect just fine and I can get out to the internet.
Even if you don't know specifically, but have some good ideas as to what might work, that's fine too. I hate having to do this every day, as it affects everyone's internet connection. Granted, it's not like I'm in a strict business situation with tons of machines and multiple access points, but there are 3 of us in the house and we all share internet access from the same router (as I'm sure most people do), and I feel kind of guilty having to interrupt everyone's connection, if even only for about 30 seconds just so I can get a net connection under Linux.
Windows connects to the router/internet just fine, btw. No problems there. I'm also using a NetGear WN111 USB wireless adapter, with the Windows drivers under ndiswrapper.
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies View RelatedI seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies View RelatedI am trying to set up an ssh server on my Debian squeeze box so that I can access it remotely when I'm not at home. I connect to the internet through an at&t 2wire modem/router. First off, I *can* ssh into the machine from inside the local network, e.g.
[Code]...
Nmap done: 1 IP address (1 host up) scanned in 2.12 seconds Playing around with Nmap, I also found that it only sees port 50001 as open.