Ubuntu Networking :: Realtek 8185 Not Working ?
Feb 15, 2010
I am brand new to ubuntu (I installed it about 2 hours ago on my new PC). Everything so far has seemed really easy and straight-forward, but I am having problems trying to connect to my wireless network.
I have a Realtek 8185 wireless card, and have the disk with the inf file on it. I installed ndisgtk but when I pointed it to the inf file, I got an "error while installing" message, then it showed up in the list of currently installed drivers in ndisgtk but as an invalid driver. I'm not really sure what I'm doing wrong.
I actually have another wireless card in my old PC (a belkin of some sort) - would I be better off using that? I'm using an ethernet cable at the moment and it works absolutely fine, I just plugged it in and off I went.
View 1 Replies
ADVERTISEMENT
May 12, 2010
Im not able to establish a Wireless Internet connection in Ubuntu 10.04.
Ive tried these steps:
1. Wireless Internet did not show via the Network-icon. Only the 2 LAN-gates where shown
2. I installed the Windows Driver (net8185.inf) via ndisgtk package
3. After restarting the computer, 2 LAN-gates and 1 WLAN where listed via the Network-icon
4. Normally WLAN should automatically start scanning for available networks, but that didnt happen
5. When I tried to connect to my own network, the computer tries to connect for 1 minute and than stops because no connection could be established
6. A wired Internet-connection does not give any problems
Details:
- I first had Ubuntu 9.10 but I wasnt able to make a WLAN connection either. I followed the same steps. After that I upgraded to 10.04
- iwconfig in Terminal gives an IP-address which consists of 12 identical characters.
- lspci in Terminal shows these data:
01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
[Code]....
My questions:
- How to create an Internet connection via my WLAN-card?
- How to install the option to search for available networks automatically?
View 9 Replies
View Related
Oct 2, 2010
I'm using Ubuntu 10.04 32 bits and a Realtek 8185 wireless card. The card worked perfectly fine with WPA for a long time in Windows 7, but on Ubuntu I'm having problems. Using it without installing anything else makes it work for a very short time. It disconnects after a while and I have no other choice but to restart the computer.
Using windows drivers and ndiswrapper doesn't work at all (in fact it makes things worse because it stops recognizing my card at all). Using the linux drivers from Realtek's website is what works the best so far. I had to compile them and install them. But it still disconnects after a few hours if I'm using WEP (and only after a few minutes if I'm using WPA). I looked at other people with 8185 problems in this forum but their solutions didn't work for me.
View 3 Replies
View Related
Mar 3, 2011
Just installed ubuntu on my computer, but when I try to connect to my wireless I type in my password and it doesn't connect.
It says its WPA/WPA2 and won't let me change that (I am not sure what mine actually is)
Im using a virgin media 'superhub' to connect but have changed the default wireless password.
View 5 Replies
View Related
May 30, 2011
I recently upgraded to Ubuntu 11.04 (natty-64 bit) and my wireless PCI card is not being recognised by default. Previously, when I upgraded to 10.10 I had to go to the Realtek website, download the driver for RTL8185 and install it (following instructions in the readme file) to get my wireless card recognised and working properly. This time around, that approach doesn't seem to work. When I try to install it using "make" I get the following error:
make: *** /lib/modules/2.6.38-8-generic-pae/build: No such file or directory. Stop.
make: *** [all] Error 2
[Code]...
View 1 Replies
View Related
Jan 11, 2010
The card is recognized by Ubuntu 9.10 and I have it in the network manager. I followed one tutorial about creating an ad-hoc network and all looked good, until I actually wanted to connect (or to be more precise, my machine is a host for other computers). The wireless icon just loops endlessly, without connecting and eventually I get "Wireless network - disconnected" message.
So, the main issue here is - connecting! I just can't. Also if you know/have some good tutorial for ad-hoc,
Code:
ivan@ivan-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"internat3"
[Code]...
View 2 Replies
View Related
Sep 1, 2011
For reasons of "soon to arrive baby taking over my office" I have had to install a wifi PCI card in my PC. It's a TrendNet TEW423PI and the chip is a Realtek rtl-8185. the card will not connect and if I hover on the network manager widget, it says "wireless disabled by hardware". I have run a few commands to try to understand what is going on but I can't see anything wrong.
Code:
macdo@McMachine:~$ sudo lshw -C network
[sudo] password for macdo:
*-network
description: Wireless interface
product: RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller
[code]....
View 9 Replies
View Related
Jun 21, 2010
I've been busy all day searching forums to get my RTL-8185 to work -consistently- on Ubuntu with no luck. Now most threads were quite old and were about older 32 bit versions of Ubuntu, so i'm wondering if someone found a way to get this card working properly with a fully up to date version of 10.04 64bit ? (uname & lspci output below)
The best (/least bad) result so far was to unload the rtl8180, clear the auto wlan0 setup in 'Network Connections' and reload rtl8180. I tried the ndiswrapper way with the 32 & 64 bit XP drivers but it complained in -both cases- that the 32b driver wouldn't work with a 64b kernel and wlan0 didn't show up in iwconfig.
[Code]...
View 9 Replies
View Related
Jan 1, 2011
I have tried ndiswrapper using 32 bit and 64 bit winxp drivers and the 32 bit driver just doesn't work period (as expected.) The 64 bit driver locked the system up completely and I ended up reinstalling ubunto. I have now reinstalled and updated and upgraded ubunto 10 times in the last 3 days of trying to get this to work and need some external!
using
Code:
lshw -C network
I do see my network card and driver.
Where I am at currently: I have a fresh install of ubunto 10.04 with it upgraded and updated. I do not have ndiswrapper gtk installed and I have not downloaded any drivers for the wireless card.
View 9 Replies
View Related
Oct 4, 2010
when I updated from 10.04 to 10.10 beta, I lost my wireless on my Gateway MX3410 laptop. In 10.04, the wireless Realtek RTL8185 card was auto-detected, worked with the default driver.
So I installed the linux driver version of Realtek RTL8185. Although the driver shows up in the "Additional Drivers" panel under "Administration", the computer is not recognising the driver.
Below is all the specs of the current situation.
Gateway MX3410 Computer
OS: Ubuntu maverick (development branch)
2.6.35-22-generic x86_64
lspci:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
lsusb:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
View 2 Replies
View Related
Oct 20, 2010
The Realtek RTL8111 wireless does not work in Mint 10 or Ubuntu 10.10. Works perfectly in Mint 9 and Ubuntu 10.04. No proprietary driver necessary. Has anyone managed to get it working in Ubuntu 10.10? : You can click the one you want to connect to and enter your security key. I just use WEP because it's easy. I enter the key and the system just tries to connect until it times out. You can repeat this process indefinitely. Wired works fine but after any available updates are installed, still no wireless capability.
View 3 Replies
View Related
Feb 23, 2010
I have no internet connection. I am running dual boot windows XP and ubuntu. The card works fine in windows, but doesn't work at all in Ubuntu. This is the card I am using Realtek rtl8139/810x Family Fast Ethernet Nic. I am using Ubuntu 8.10, codename intrepid. I hate windows because of the viruses I contract everyday, so I decided to use Ubuntu, but this does no good without networking. so I can get online. What I do now? It is an onboard LAN card, cable is plugged in a green light is on, ubuntu just doesn't recognize it.
View 2 Replies
View Related
May 30, 2011
Today I realized that my newly installed Natty does not recognize the Ethernet port, I used to have it when I was working on the Ubutnu 10.10. The following is the output (only the network related part) of lshw command:
Code:
-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[code]...
View 5 Replies
View Related
Mar 18, 2011
I've been using a RealTek 8190 PCI wireless card on my desktop in Ubuntu 10.04. The net819xp driver worked fine in ndiswrapper. Then my housemates got a new router and switched our wireless SSID & password. In network manager, I can see the SSIDs, but when I try to connect to our SSID, it continues trying to connect but never does connect. Something related to the router change and router firmware upgrade created this problem and i'm sure i need to fix it on my computer. All my windows7 flatmates are connecting with no problem. Right now I'm using my laptop, so i can't copy & paste results from terminal commands,
View 1 Replies
View Related
Jun 22, 2011
(For the record, I have already read the other threads. Either they don't work for me or are too difficult.) My laptop is an Acer TravelMate 250. I have installed Ubuntu 10.10 (2.6.35-28 generic i686) after erasing Windows 7. At first, the usb wireless adapter worked. Then, I restarted the PC because of some updates and it didn't work anymore. In "edit connections" I find "Auto SpeedTouch8350DB" which is the wireless connection (on my sis's computer it works). When it tries to connect, I'm asked the password but it doesn't work.
[Code]...
View 3 Replies
View Related
May 11, 2010
The device it's properly recognized and iwlist scan even list the networks, but the "activate wifi network" on the network manager on right-top of the screen it's grey and therefore cannot be activated. This seems to be the problem ( rfkill list ouput ):Quote:
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: yes
[code]....
View 6 Replies
View Related
Feb 10, 2010
I use Ubuntu Intrepid Ibex. I have a Realtek HD Audio Sound Card. All works well, but i dont get any sound, when i insert an earphone/headphone into the audio jack. The speakers are working though. I have an Acer aspire 5542g laptop, with ADM Turion dual core, 3gb ram, ati mobility radeon GPU.
View 1 Replies
View Related
Jan 24, 2010
I'm running Ubuntu 9.10, but so far I've been unable to get sound to work. I know my sound card is Realtek, because I've had to install the HD Audio Codec Driver when I was on Windows. I downloaded the driver for Linux and it is currently sitting in my home folder. When I tried to Code:sudo ./installthe driver, it failed for the following reason:
Code:
WARNING!!! The mixer channels for the ALSA driver are muted by default!!!
**************************************************************************
[code]....
View 7 Replies
View Related
Oct 22, 2010
Supported chipsets:
8188
8191
Terry Polzin on the Fedora list today posted a request for help with getting a Realtek 8188S(U) working. I replied saying that I had a similar device and shared my experiences.
I told him that there is a driver in staging which supports the device, but that Fedora only ships quality working drivers by default, so no staging drivers are included. It's easy enough to get them though, just add the RPMFusion Free repository and install their kmod-staging package which (as the name might give away) includes the staging drivers for the current kernel.
Once you have that installed, the r8192s_usb module can be loaded, but the device still needs external (presumably proprietary) firmware to work. Fortunately, although the driver available from Realtek does not include it, it was included on the disk, and is also available in the Billion driver from their website. So, once you have put the firmware in the right place, the device just works.
Here are the steps to get it working (you will need to have RPMFusion enabled, and run these as root).
Code:
yum install kmod-staging unzip
depmod -a
wget http://au.billion.com/downloads/3011N/3011N_Linux_Driver.zip
unzip -j 3011N_Linux_Driver.zip "*rtl8192sfw.bin" -d RTL8192SU
[Code].....
The main downside here (apart from the obvious) is that you will be relying on RPMFusion to build an updated kmod-staging version when you get a Fedora kernel update. Sometimes this might not happen before you get your kernel, so when you reboot, you lose your wireless (because there's no driver). If so, boot to your older kernel for a while, or build the driver yourself, or create an akmod instead of kmod.
View 5 Replies
View Related
Apr 15, 2009
Just installed latest Ubuntu (intrepid Ibex) on my DFI Ultra Infinity II system. It has onboard audio via a Realtek ACL650 chipset. Unfortunately, no sound. Have searched various forums, etc. and found recommendations to download the ALSA driver from realtek, but those posts are from ~2007 and the drivers are dated from back then as well. Nobody present-day seems to be suffering audio problems with this motherboard or chipset. I did install the 2007 realtek driver, but no change. What logs can I check?
View 3 Replies
View Related
Aug 29, 2010
I'm trying to get sound from Ubuntu 10.04 out thru the integrated realtek alc850 chipset to my home theatre via the spdif port. I installed the drivers from realtek but still no sound. Under Places-Preferences-Sound, only the IEC958 shows up. What else should I do? Neither Rhythmbox nor Alsa show the Realtec spdif.
View 1 Replies
View Related
Mar 22, 2010
as reported on the Milestone 3 release news:
Originally Posted by Me, myself
I�d like to report a bug in the distro that KDE cannot deal with my Sound Card (snd-hda-intel). It�s recognized by the kernel and the module works well, the Yast tested it well too, but when I try to use AmaroK or a media/video player it doesn�t work, never, since the version 11.1 when I acquired my PC.My sound card is a onboard nForce 630i, that uses Realtek High-Def audio driver; I suppose I ain�t sayin� foolishness, so on openSUSE and KDE the sound doesn�t come up,but only on programs, in tests and on another situation it works,even on streaming videos! That�s why I don�t understand what is the real deal.I tested it on Gnome too and the problem persists,so I�ve to change the distro and I�m using Mandriva now, which I don�t like it too much, but everything works well.
View 1 Replies
View Related
Mar 14, 2015
Have a very unusual problem that I am looking at troubleshooting. Only problem is I don't know where to start.I have the following wireless usb device:
Code: Select allBus 002 Device 007: ID 050d:845a Belkin Components F7D2101 802.11n Surf & Share Wireless Adapter v1000 [Realtek RTL8192SU]
Now it is fine when browsing the web, but whenever I download a large file/game from Steam it becomes unresponsive and stops working.I have noticed it happens whenever the download is maxed..which at the moment is at around 5.4mbps on steam.Never get a warning...just internet stops working...no pages can be displayed...The connection never disconnects.I can only get it working again when I unplug it and re insert it back in again.
Things I have tried:
- Returning it to the shop and getting a new one (didn't fix it).
Code: Select allzerocool@hal9000:~$ uname -a
Linux hal9000 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03) x86_64 GNU/Linux
View 7 Replies
View Related
May 28, 2010
I am not very experienced using Linux but I never had big problems with Ubuntu. Now I am busy writing my PhD thesis and therefore I had to install CentOS to use one lousy program that I could not get to work under Ubuntu. However, it seems to be quite fine and it is working well besides one fact: The network card stopped working. In the beginning it was working fine although the speed was only on the level of 100mbit. The switch and the LED on the card indicated gbit connection, though. I tried to install the driver for the 8168 card which reduced the card to 100mbit (indicated by the LED on the switch and the card).
Ethtool indicated it was gbit capable but I couldn't activate it. After reading more and more I figured I have to use the 8169 driver again and live with the 100mbit. Unfortunately, after uninstalling the old driver and reinstalling the driver 8169 the network isn't working at all anymore. The network-manager displays the card as inactive and when I try to turn it on it complains about the wrong mac address, which I am not able to change to the proper one. I am using CentOS 5.5 with the latest updates.
View 17 Replies
View Related
Jul 11, 2010
I recently installed realtek sound driver software in my system,
but after installing it,the speakers are not working....
I'm using fedora 13(x86_64).
i just want to make my system speak,like before....
how to make my speakers work ?
View 3 Replies
View Related
Apr 6, 2010
I'm using openSUSE 11.2 KDE on a Fujitsu-Siemens Amilo Pi 1536 laptop. My problem is that my microphone (I'm attempting to use a 3.5mm headset) doesn't work. Audio playback however does work through the built-in speakers and headphones.
I have gone through the SDB:AudioTroubleshooting - openSUSE as suggested by oldcpu on the Welcome to multimedia sub-area sticky.
I have tested audio recording with
Code:
arecord -vv -fdat foo.wav resulting in a silent recording. The vumeter showed 0% during the recording.
Here is my url produced by the alsa-info script:[URL]
rpm -qa '*alsa*'
Code:
alsa-plugins-1.0.21-3.3.i586
alsa-1.0.21-3.2.i586
alsa-oss-1.0.17-25.2.i586
alsa-devel-1.0.21-3.2.i586
[Code].....
View 10 Replies
View Related
Feb 26, 2010
I have a white label netbook with the Realtek RT8187SE Wireless card on PCIe. It is not detecting wireless networks consistently. When I am even 1 meter from the wireless router, I get no networks in range, but sometimes I pick up networks that are more than 20 meters from me. I can not connect, even if it is unsecure.
WiFi Radar does not detect the card. If I run a system check on the PCI bus I get the following: 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22) Subsystem: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller Flags: bus master, fast devsel, latency 0, IRQ 17
[Code]...
View 3 Replies
View Related
Jul 24, 2010
I've had this problem ever since I've installed this ethernet card in the PC (after the 'effin integrated one blew off for some reason), I wasn't ever able to make the networking work again. Every time I try to trigger the PPPoE connection (DSL), the PPP configurator keeps on looking for the concentrator, reaches over 100% and stayed like that for 1 hour. Here's the terminal log of everything that I've tried:
Code:
~$ sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8139D [Realtek] PCI 10/100BaseTX ethernet adaptor
vendor: Hangzhou Silan Microelectronics Co., Ltd.
[Code]...
View 9 Replies
View Related
Oct 12, 2010
I have an ASUS M4A785-m and it has the Realtek 8112L gigabit nic. The weird thing is, the 10.10 rc saw the nic card just fine, and windows sees the card so it's not disabled in the bios.
Ubuntu says i have no network connections and i need to get internet. Any suggestions?
I should also note that i'm running from the livecd and lspci shows that it detects my NIC. but my NIC isn't "detected" in that it can be used.
View 5 Replies
View Related
Jan 14, 2011
Bus 001 Device 007: ID 0bda:8171 Realtek Semiconductor Corp. RTL8188SU 802.11n WLAN Adapter this adapter shows up in network manager when connected to computer but doesn't detect network and cant connect to any network I have setup in nm, the adapter works fine in windows and it's supposed to work in linux or do I have to install drivers?
View 8 Replies
View Related
