I recently installed Ultimate Edition 2.7. It works great. My problem is that most of my apps like frostwire, Ktorrent .... for that matter any application that requires to connect to the internet....are not able to detect my internet connection. I'm connected to Auto ethernet....I can browse...All my browsers work though and the OS is also able to connect.
View 1 RepliesI have just installed ubuntu 10.10 on my windows 7 os as part of a dual boot, and im having trouble connecting to the internet. I have a wireless edimax PCIe adapter and seem to be able to detect the signal fine but when i try to connect ubuntu starts thinking about it and then after a while says "disconnected from wireless internet".
I'm pretty much a noob to lunix but have a small amount of experience with the terminal, also not so great on the networking terms, so please dont go too deep to quick on the terminology!
very slow internet connection with a download speed of only five kbps and my problem is i have many softwares installed which startup during my boot and i can see network activity in the system monitor that some software is using my internet speed and all other important downloads run slow...Can anybody tell me some softwares which tell me which software is using my internet bandwidth, I tried iftop and it shows only the connection between client and server with ip address ...I need softwares which tell the software using the internet bandwidth
View 2 Replies View RelatedI am using tata indicom photon+ for mobile broadband internet connection.
Code:
Befor yesterday, I was able to connect via this, but today(i guess a update yesterday is the culprit) i cannot. while it should connect automatically, even usb_modeswitch cannot detect anything.
Quote:
my /etc/modeprobe.conf is also blank. But I can work with wireless
I'm using a pppoe internet connection, when enter connection manually everything works fine but when connect automatically on startup (put script in ect/init.d/) the connection is ok and works, but applications can't join internet like firefox, chrome, only terminal and lynx browser can use internet! ping responds are OK
View 8 Replies View Relatedsince last month i'm using ubuntu 10.04 and i have installed lots of apps and packages i needed on my old 20GIG hard drive and i'm very happy with it but now i had to use this 20gig hard on other old PC and erase it and install all the stuff again on my 500 gig hard drive dual boot with win7 but i don't have enough Internet bandwidth to download all apps again and i want to use my current apps installed on my old hard drive
i tried cloning with Acronis true image but i didn't work then i tried pasting my old hard /var/cache/apt/archives to my new installation but it didn't work neither. does anyone know how can i clone or use my already downloaded packages on my new installation?
Using lsof I noticed that everytime I open some apps (like Rhythmbox or Banshee) it connects to the internet over ports 80 and 443. All I'm doing though is surveying my music collection. Why is it connecting to the internet for this? I don't have podcasts or album covers or any of that stuff set. In fact I turned all that stuff off.
the problem is that I only get so much bandwidth on my mobile broadband plan. I don't want apps connecting when I don't need them to. I played around with the UFW but it appears to only allow port configuration. I can't see how to control the connections of applications. I can't block ports 80 and 443 because then I'd shut down the web browser. How do Linux users control the internet connections of installed applications?
ubuntu dont detect the Vodafone K3765 3G my internet... my note is a aspire 1410 . and i install ubuntu 10.04 LTS .. and he dont detct my vodafone 3G
View 7 Replies View RelatedI installed Slackware 12.1 as I dont like KDE4 much yet. Any way For Some reason I find I can only use the internet by using apps with root privileges. Does anyone know what I may need to edit by any chance & what.?
View 8 Replies View RelatedIn my network I have 25 workstations and some serves. Everything working in local LAN with firewall. The problem is that on one machine (I dont know which one) is installed software which sending data to the internet. Actually I dont know what it is. Last time as I remember was trojan which can create new network interfaces in windows and send some data to the internet. The half speed of my network connection is used by this infected machine. How can I detect which machine it is? How can I listen/capture some traffic and analyze from which machine I have more connections.
Please take a look on this time. Instead of 141-150ms should be 4-5ms.
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=1 ttl=249 time=141 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=2 ttl=249 time=135 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=3 ttl=249 time=147 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=4 ttl=249 time=127 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=5 ttl=249 time=156 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=6 ttl=249 time=129 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=7 ttl=249 time=188 ms
How can I detect which machine is infected using only linux and keyboard ?
Some minimized apps no longer appear in the top menu and by that are no longer accessible.For example firefox with the minimize addon or Jungel Disk backup service.How can I reach apps that minimized them self and are not shown in the top menu?
View 2 Replies View RelatedI've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.
A small sample of what keeps on repeating:
Quote:
Code...
To find the appropriate firmware without knowing the make or brand of your wireless chip, you can use the command:
#fw-detect
But apparently debian package do not offer this useful tool, well, certainly for sidux exclusively.
Is there a package of fw-detect eventually?
I recently installed the 64bit version of 10.10 onto my machine, which runs on an Intel DP55WB motherboard. The on board NIC is not detected and I cannot get it to connect to a local wired connection. I ran sudo lshw and it returned (among other items)
Code:
*-network UNCLAIMED
description: Ethernet controller
product: 82578DC Gigabit Network Connection
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
version: 05
width: 32 bits
clock: 33MHz
capabilities: pm msi cap_list
configuration: latency=0
resources: memory:e0200000-e021ffff memory:e0224000-e0224fff ioport:2020(size=32)
How to get 10.10 to recognize the NIC?
I could not connect to any wireless network on my laptop with ubuntu 9.10. Network manager detects all wireless networks avaliable, but could not connect to any of them. When I try to connect, system asks for wpa-key, but typing it gives no result. I tried home and office network, but it is the same. There is WinXP installed on the other disc partition and no problem with wireless connection at all.
I have Acer 3680 with broadcom wireless adapter 4318 (driver was installed via ndiswrapper). I've already spent hours, browsing the Internet, but it does not help unfortunately, so I'll appreciate any advice of experienced user.
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11g ESSID:"SvoyDom"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1E:8C:E5:12:BE
Bit Rate=54 Mb/s Tx-Power:25 dBm
[Code]...
I recently downloaded Ubuntu 10.04 into my Windows Vista laptop & I have downloaded the one that can run alongside my current system, so I'm running dual OS. At the start up screen where I choose the OS, I choose Ubuntu & it loads fine. Everything looks perfect except that it won't connect to or detect any wireless connections. I have tried clicking the Network Manager icon & clicking New Connection. I typed in the SSID & security key for my wireless connection/router & after I hit create, a small window pops up saying "Wireless Disconnected: you are now working offline" or something like that. Nothing happens/changes. There is no internet connection on Ubuntu OS. But when I switch over to my Vista OS, the internet works perfectly (obviously.)
View 1 Replies View Relatednot connect to hotspot via wireless..i was check via console terminal "ifconfig wlan1 up" but not display message.. i have used network tool via gui but i don't know how to setting this wireless.. iam using ubuntu 10.04and my netbook specification is:
Cipset : Intel
Prosesor : Intel atom 1.66 GHz, 667Mhs FSB Cache 512 KB
Hardisk : WDC 250 GB
[code]...
I have hp q 610 ubuntu 10.10 can't detecte wirless whatshould i do?
View 2 Replies View RelatedJust like the title said it won't detect my wireless card. Anybody know what's wrong with it?
View 9 Replies View RelatedI have installed Ubuntu 9.04 onto a USB stick (8mb). Works OK, it detects my Wireless Broadband, connects and works OK. But it does not detect the Wireless from my PC router. Do I need to install something to do this?
View 2 Replies View RelatedUbuntu 10.04 can not detect my wireless connection.I don't know anything about this subject.I am using :
Linux lucas05-desktop 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC 2010 i686 GNU/Linux
lucas@lucas05-desktop:~$ iwconfig
[code]...
I have looked through many different forums and ..... tutorials on how to get Samba to work. I am new to Ubuntu (Linux in general). I am able to access my shared folders on my Windows 7 system with my Ubuntu system. I cannot access the shared files on my Ubuntu though on my Windows 7.
View 1 Replies View RelatedI'm having trouble detecting wireless networks in range.
View 1 Replies View RelatedMy computer is Dell Inspiron N4020.And after I installed the Ubuntu 10.04 successfully,a problem occured:No wireless device appear nor the wireless signal
View 1 Replies View RelatedI am trying to connect my desktop to my laptop over a non-internet connected LAN, but when i enable the LAN connection on my desktop (the one with the wireless) its internet stops working.
it is a very similar problem to this except that i am using ubuntu for the machine with the two connections.
right now i have my wireless on the 192.168.1.* address space, while the LAN is to be on 192.168.5.*
note: my goal is not to share internet with my laptop, just be able to connect to it and the internet at the same time.
desktop: ubuntu 9.10 , wireless and LAN
laptop: windows xp, LAN only
I'm trying to set up a wireless AP with Internet sharing. I currently have the AP setup with hostapd and a dhcp server. The clients can connect but there is not Internet sharing. Now my situation is somewhat uniqe in that my internet connection is my teathered android cell phone. The tether app is azilink and i use openvpn to create a virtual networking interface(tun0).
View 4 Replies View RelatedI have a simple home network consisting of 2 laptops - one is a linux box and the other runs windows and linux with a dual boot setup.I develop my web apps on the linux box but would like to test them out on the windows machine using IE7. I have abandoned the idea of doing this in Linux using wine since in the real world this is unrealistic
View 9 Replies View RelatedOn this box I have Two seperate Ubuntu installations. Recently in both I seem to be having the same problem. I initially can connect to the internet as per normal and use any internet application. But after a period of time, sometimes just minutes, sometimes hours, even though the icon says connected, I cant update pages or send emails etc because there is no actual connection. My Physical connection is good I know - My Ubuntu laptop and Windows gamming PC connect fine during this period. So
Does this suggest an intermittent hardware fault or is there some thing in Ubuntu I can check to make sure that it is setup correctly and nothing has been corrupted? I am a lay PC person - I dont really want to be command prompting - Plug & Play and Point & Click is my limit.
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies View Related