General :: Ubuntu Does Not Detect The Vodafone K3765 3G Internet?
Jul 28, 2010ubuntu dont detect the Vodafone K3765 3G my internet... my note is a aspire 1410 . and i install ubuntu 10.04 LTS .. and he dont detct my vodafone 3G
View 7 Repliesubuntu dont detect the Vodafone K3765 3G my internet... my note is a aspire 1410 . and i install ubuntu 10.04 LTS .. and he dont detct my vodafone 3G
View 7 RepliesI'm trying to connect to the Internet via my Vodafone phone in tethering mode, either directly or via wifi using a Netgear goggle but neither is working.
View 1 Replies View RelatedI'm using SuSE 11.3. I have installed this betavine stuff with which I can use my Vodafone mobile connect usb device. (vodafone-mobile-connect-2.10.01-1.noarch.rpm + dependencies.) I was able to get it to run, it can connect, I can even send text messages (SMS) with it.
However, if I try to use the internet, the system behaves as it wasn't connected to it at all. ping doesn't see anything, neither does firefox etc. I have turned off all proxy and firewall settings.
I suppose I should tell Linux to use this connection for the internet, but how? Do I have to configure something with NetworkManager?
I have a Hauwei K3765 Mobile Broadband stick and would like to use it on my Ubuntu 9.10 operating system.I've tried downloading the vodafone-mobile-connect_2.15.01-2_all.deb package, but I recive the following error message:- /tmp/vodafone-mobile-connect_2.15.01-2_all.deb could not be opened, because the associated helper application does not exist. Change the association in your preferences.Does anyone know what this means and how I could install the package?
View 4 Replies View RelatedI am trying to get my daughters Ubuntu Laptop to connect to the internet via a Vodafone USB dongle.
I have managed to get the modem itself to connect to Vodafone using the Sakis3G script (brilliant), however once connected the laptop will not pass data through this connection. i.e. when I select "Vodafone prepaid" as a network connection, the little pop up comes up and says GSM no connected?
When I get a connection information from Sakis, it gives an IP address and even had a tiny bit of throughput, however I do not know how to tell it to use the vodafone thingy.
I am new to linux (Ubuntu 8.10). I don't know anything about sudo commands. At the moment I am using windows to connect to the internet because I con't get my vodafone K3765 USB 3G modem instal om Ubuntu. There is only .exe installation files on the stick. Every thing I try I first have to download it to a disk, restart my pc in Ubuntu and then try it if it dus not work,I have to restart my pc in windows connect to the internet and ask again. I love Ubuntu but I need internet.
View 3 Replies View RelatedI have tried geting the Vodofone dongle to work on Ubuntu 9.10 with some difficulty, followed several web suggestions, the software appears unstable.
This is for Australia.
Is there a good set of instructions to follow that work okay.
Dose Ubuntu 10.10 work better for this.
My name is Mayan Viljoen & I am from South Africa. I am very new with Ubuntu and I don't understand why the Vodafone 3G modem HSDPA USB stick (model k3570-Z) which I recently bought should not like Ubuntu as much as it does Windows. I want to work on the Ubuntu side of my split hard drive rather than the Windows side. It is notoriously difficult to get connected to the net on the new Ubuntu with this 3G modem. Is it because it is really manufactured for Windows or is there another reason? It will only really connect approx. 1 out of approx. 8 odd times on the Ubuntu 10.8 Operating System, which is very annoying to me. What can be the reason for this? If it is that this modem was really made for Windows, what then is the best 3G modem and network to use with Ubuntu 10.8?
View 2 Replies View RelatedMy daughters friend has brought me her Eeepc 900A and asked me to get it to work the a Vodaphone Dongle ..
Here what i know ... the Dongle is a K3570-Z and the Eeepc 900A says Lunix ASUS ...
I know nothing at all about Linux and reading howto's on the net has totally thrown me...
I also tried to get wireless to connect and it just says Pending and same with a Network Cable ..Pending ... whats that .. ?
i try to connect vodafone usb modem on it but m unable to connect
View 1 Replies View RelatedI recently installed Ultimate Edition 2.7. It works great. My problem is that most of my apps like frostwire, Ktorrent .... for that matter any application that requires to connect to the internet....are not able to detect my internet connection. I'm connected to Auto ethernet....I can browse...All my browsers work though and the OS is also able to connect.
View 1 Replies View RelatedI have just installed ubuntu 10.10 on my windows 7 os as part of a dual boot, and im having trouble connecting to the internet. I have a wireless edimax PCIe adapter and seem to be able to detect the signal fine but when i try to connect ubuntu starts thinking about it and then after a while says "disconnected from wireless internet".
I'm pretty much a noob to lunix but have a small amount of experience with the terminal, also not so great on the networking terms, so please dont go too deep to quick on the terminology!
very slow internet connection with a download speed of only five kbps and my problem is i have many softwares installed which startup during my boot and i can see network activity in the system monitor that some software is using my internet speed and all other important downloads run slow...Can anybody tell me some softwares which tell me which software is using my internet bandwidth, I tried iftop and it shows only the connection between client and server with ip address ...I need softwares which tell the software using the internet bandwidth
View 2 Replies View RelatedIn my network I have 25 workstations and some serves. Everything working in local LAN with firewall. The problem is that on one machine (I dont know which one) is installed software which sending data to the internet. Actually I dont know what it is. Last time as I remember was trojan which can create new network interfaces in windows and send some data to the internet. The half speed of my network connection is used by this infected machine. How can I detect which machine it is? How can I listen/capture some traffic and analyze from which machine I have more connections.
Please take a look on this time. Instead of 141-150ms should be 4-5ms.
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=1 ttl=249 time=141 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=2 ttl=249 time=135 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=3 ttl=249 time=147 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=4 ttl=249 time=127 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=5 ttl=249 time=156 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=6 ttl=249 time=129 ms
64 bytes from web30.ispnetz.de (62.xx.191.74): icmp_seq=7 ttl=249 time=188 ms
How can I detect which machine is infected using only linux and keyboard ?
I am using tata indicom photon+ for mobile broadband internet connection.
Code:
Befor yesterday, I was able to connect via this, but today(i guess a update yesterday is the culprit) i cannot. while it should connect automatically, even usb_modeswitch cannot detect anything.
Quote:
my /etc/modeprobe.conf is also blank. But I can work with wireless
I am having problems connecting to the internet using a mobile dongle. I have installed Ubuntu 10.10 and am attempting to use a Vodafone ZTE K3570-Z on pay as you go. I have followed instructions to the letter, installing software downloaded from Betavine and attempted various alternatives, but cannot get connected.The dongle works fine using Windows. This is currently my only source for the internet at home, so am becoming desperate. If I do not get this problem sorted out I will be forced to return to windows xp os.
View 2 Replies View RelatedI've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
We recently got a new mini PC which came pre-installed with Ubuntu 10.10, so far, so good. Today, we invested in a Vodafone broadband dongle (model number: K3570-Z/K3571-Z). I've installed the dongle on our old XP machine, with no problems, however, Ubuntu won't even recognise that it's plugged in. What am I doing wrong? We've had the new machine for 3 days, so I'm really new to all of it and haven't learnt how to use the command prompt yet, so I'm hoping someone has some advice for a complete beginner. I can't understand why it's not recognising that somethings plugged in, because from what I've found, you need usb_modeswitch in over for the dongle to be recognised as a modem.
View 6 Replies View RelatedI can't using my usb modem on ubuntu 10.10.
I use vodafone usb modem, without detail information of what type or chipset used.Here is what I can collect, when I plugged the usb modem to laptop..
result of dmesg..
---start---
[ 956.873758] usb 1-1.1: new high speed USB device using ehci_hcd and address 5
[ 956.974318] scsi5 : usb-storage 1-1.1:1.0
[ 957.974336] scsi 5:0:0:0: CD-ROM HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
[ 957.975167] scsi 5:0:0:1: Direct-Access HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
code....
how can I troubleshoot the problem, so the usb modem can work properly.
I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.
A small sample of what keeps on repeating:
Quote:
Code...
To find the appropriate firmware without knowing the make or brand of your wireless chip, you can use the command:
#fw-detect
But apparently debian package do not offer this useful tool, well, certainly for sidux exclusively.
Is there a package of fw-detect eventually?
I have a Vodafone (UK) PAYG USB stick (Huawei K3565 v2) which worked perfectly out of the box in 10.10. I also installed Betavine Connection Manager but never actually needed it. Since upgrading to 11.04 the stick won't connect. When I plug it in I get a green flashing light then a blue one but it never registers with Connection Manager. Nothing I can do tweaking the settings seems to make it work either.
View 9 Replies View RelatedI want to get a vodafone internet stick, but "they" say I have to install: vmb_1.1.0-0_i386.deb, downloaded the file and get this error: Dependency is not satisfiable: libboost-serialization1.40.0 (>= 1.40.0-1) Now it turns out that I have libboost1.42.0 (1.42.0-4ubuntu2) installed...
Am I right in assuming that vodafone is to blame for the software not working?
Is there anyone who has got this software to work or has any tips?
My PC crashed and I replaced Windows XP with Ubuntu. My laptop is still on Windows. Haven't been able to connect to the internet on my PC, Linux IT guy told me there was an issue with drivers on Ubuntu. Was told the Ubuntu community would know how to fix this. I've been reading through the posts and found a similar sort of problem posted with a solution posted also. The solution it seemed, lay in the Sakis website. I went to the Sakis website and downloaded Sakis3G onto my memory stick via my laptop. I need to get internet connectivity on my PC. My friend advised me to put the stick into the PC and then to open the terminal and type the following commands: gunzip sakis3g.g2 > chmod+xsakis3g > /sakis3g --interactive. Each command on a new line however after typing the first line: gunzip sakis3g.g2, I got 'No such file or directory'.
View 9 Replies View RelatedI 've problem with this usb stick to connect to Internet. I desperately tried for 6 long hours but could not resolve it! I almost tried every possible / meaningful solution but none worked! My system detects the modem but it says NO CARRIER !
Code:
chinmaya@chinmaya:~$ sudo wvdial
--> WvDial: Internet dialer version 1.61
--> Initializing modem.
--> Sending: ATZ
[Code]...
Anyone know how can get a vodafone huawei 4511 dongle working on ubuntu?
I've spent several hours reading stuff, most of which is way above my head.
I plug it in, set it up in "edit connections". Nothing happens.
It shows up in disk utility twice, as a usb vodaphone storage (huawei) and cd drive (vodafone cd rom)
I switched from puppy to ubuntu because I read that you could just plug dongles into ubuntu and they would be recognized. (Spent many many hours trying to get it working in puppy.)
how to use vodafone datacard on suse 11.1?
View 4 Replies View RelatedI have installed the 3 following pakages of Fedora 13 ozerocdoff-0.4-1.fc11.i386.rpm usb_modeswitch vodafone-mobile and after that I have given the command
vodafone-mobile-connect-card-driver-for-linux-debug
all I see after that :
vodafone-mobile-connect-card-driver-for-linux-debug
/usr/lib/python2.6/site-packages/twisted/persisted/sob.py:12: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[Code]....
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
I'm somehow troubled by my Vodafone UMTS-Card (E3730) because it's not working. It used to work on this very laptop back when I still had openSUSE 11.2 installed. Back then all it actually took was to put it in - everything necessary to make it work was already onboard.
I'm now running CentOS 5.4 with the latest Kernel and it just won't do. The hso module is compiled and seems to be working:
[root@localhost udev]# lsmod | grep hso
hso 84036 0
I'm new here. This is my first post. Something tells me my problem will be met with great sighs and shrugs of shoulders. I think you may have heard this problem just a few thousand times. couple of days ago i took the plunge and installed Ubuntu 9.10. I already run XP Pro. I have the system set for dual booting until i get to grips with Linux and have all that i use daily from software to hardware comprehesively installed and running. then i have this ideal romantic dream of dumping my microsoft heartache, and living a happy life with the new love in town (an OS that works!)
Vodafone (Huawei K3520) mobile broadband dongle. Yes i know its a touchy subject but i am going cross-eyed reading info on various forums from this one to the betavine forums and a detour through vodafone themselves. I just can't find clear concise info on how to get this dongle up and running with Ubuntu. My laptop is Acer Aspire 5633 WLMi. I would really really appreciate your help on this subject i need to get online with this dongle and Ubuntu.