Ubuntu Networking :: Apache2 On A Computer On A Gateway?
Jul 8, 2010
I have Ubuntu 10.4. My computer is connected to AT&T U-verse on a 2Wire brand Residential Gateway. The RG has the actual IP address. It's assigned my computer the address 192.168.1.66. I want to run the apache server to share files between my two computers across town. My other one is directly connected to the internet with a DSL modem so it's IP is static and was easy to set up and get going. What I want to know is what do I type to access my apache server on my RG? Galactic newbie here.
View 3 Replies
ADVERTISEMENT
Jan 2, 2010
I have a gateway computer that I've been trying to fix up - whenever I try to install Windows XP/2000/Ubuntu, it finds a bunch of errors. I'd really like to get this computer working, it has a 300GB HD, TV inputs, USB ports out the wazoo, and all that other good stuff. Can someone help me with what to do or have a suggestion on what to replace?
I have formatted the hard drive (the Windows installation did it.) The windows installation is to the point where its copying the installation files to the disk, then it gives me an error that it can't find/can't copy the file. The Linux installation just gives me cryptic errors before it even does anything.
I just want to get it to a point where it's usable I really don't care what operating system.
View 1 Replies
View Related
Mar 26, 2010
I am having some strange requirements. In my office we all are suppose to use internet by proxy. Squid is installed as proxy. we are given a username and password, that we are suppose to authenticate our selves before we can use internet. But tell u some rules are very bad, like we can not download file from net larger than 3MB,etc. Squid is configured with strict policy. Now, for R & D purpose I am having root access to an unrestricted computer, which is connected to Internet directly. and there is no such limit, as I can use wget to download files of anysize on that machine. It uses fedora 10. I am using fedora 12. Now is there any way I can configure these two PC to use unrestricted net. I mean can I configure my pc to use Internet via that unrestricted pc. What are the changes I will be needed to do at my PC and other open net PC? I am having root access to both PC.
View 1 Replies
View Related
Apr 28, 2009
And I'm currently working on a new CentOS 5 install I've made on a computer I've got.. So I'm now trying to get that computer to reach my home network through one of my other computers, which have got XP installed. I've configured the XP computer to act as a gateway from one network card to another, and It works with another XP pc, but no luck with my CentOS 5. I used this link [URL] And I configured the correct network card.
So.. the IP of the XP machine is 192.168.1.70, which I have set as a static. So that the CentOS will find it. And I've connected the (fully working) network cable correctly.
What do I have to do?
I have configured the CentOS to recieve an IP dynamically. (dhcp).. Might that be the problem? (well.. one of the problems.. I've tried to set it to static.. ...?)
Is there more to it than this? I mean when I'm working on communication through an XP machine... ?
View 1 Replies
View Related
Mar 4, 2011
I am wanting a computer with an external dialup modem (ppp0 modem through a com port /dev/ttys1) to act as a gateway to the internet, forwarding internet traffic through ethernet (eth0 is set to static 192.168.2.2) to a router (the router is 192.168.2.1) where it will be broadcast to other wireless computers like my laptop (192.168.2.3). I've had this setup until recently when the gateway computer (the one with the modem) died. Now I'm replacing that machine with another box and an install of Ubuntu 10.10 but so far things aren't working for me.
Success so far:I have dialup access working on the new box. Took me a while to work out the configuration for getting dialup working, though the IP address is Dynamic (or it won't stay connected), "Check carrier line" is off, and "Ignore Terminal Strings (stupid mode)" is on in order to successfully connect and stay connected to my ISP. I also had to make my normal (non-root) user "lancer" a member of the "pid" group (the reboot) in order to use gnome-ppp as non-root. The laptop (192.168.2.3) is successfully connecting to the router (192.168.2.1) as I can see the router configuration page when I type http://192.168.2.1 into the laptop's web browser. This setup is unchanged from how I had it before when this was previously working and I don't want to change how the router itself is set up. What I want is to know what to fix in the new box in order to get it connected to the router (through ethernet) and bridging the internet through.
My problem is that whenever I plug in the eth0 from the gateway (192.168.2.2) to the router (192.168.2.1), Ubuntu's automatic plug-me-in network detection kicks in and I find my dialup no longer working through some kind of IP conflict (at least that's what I think it is). Maybe I don't have the "gateway" correctly assigned? (in the gateway computer for the ethernet connection, I had it pointing to itself as I don't know what to put for "gateway IP" as that is automatic So, just to check my connection, here I am pinging google (from the gateway computer which has the dialup modem) once a dialup connection has been made.
Code:
lancer@lancer-desktop:~$ ping www.google.com
PING www.l.google.com (74.125.237.17) 56(84) bytes of data.
64 bytes from 74.125.237.17: icmp_req=1 ttl=55 time=179 ms
64 bytes from 74.125.237.17: icmp_req=2 ttl=55 time=176 ms
64 bytes from 74.125.237.17: icmp_req=3 ttl=55 time=158 ms
[Code]...
What do I need to do in order to make Ubuntu of my gateway computer stay connected to my dialup but also simultaneously share an ethernet LAN to my wireless router and feed traffic to the other computers from there? I have googled this but some of the most promising instruction (e.g. http://www.ubuntugeek.com/sharing-in...in-ubuntu.html) call for packages like dnsmasq or ipmasq which seem defunct now in Ubuntu 10.10. Other pages seem to suggest dual-networks "can't be done" in Ubuntu [URL].. (what!?! I had it before my other gateway died)
View 1 Replies
View Related
Mar 5, 2011
Someone in my building has placed an old Gateway computer in the trash room. All I know from looking at it is that it says made for Windows XP and its the old tan hue computers use to have. My question is what are the odds that if I go grab it before trash day I could boot up Ubuntu 10.10 or some other current Linux build on it? I just want to use it as a secondary computer and solely for web browsing and possible word processing.
View 9 Replies
View Related
Sep 30, 2010
The dhcp doesnt work unless i put a switch or router between the ubuntu gateway and the connecting computer.
setup
Code:
Code:
Code:
Code:
Im on ubuntu 10.04. is this normal? or should i be able to connect without having a router or switch between the ubuntu server and the internal network....
View 3 Replies
View Related
Nov 19, 2010
I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 9 Replies
View Related
Dec 9, 2009
I am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
View 1 Replies
View Related
Jul 11, 2011
I am trying to get a Linux (Slackware 13.37) working in a Windows networking environment. The IT support for this organisation does not extend to Linux support, so I'm limited in what help I can get for this.
I'm trying to get to the point where I can get to the internet to download what I need on this Linux machine.
The situation is this (*fictitious addresses used) -My Linux machine uses a fixed IP address (10.100.150.21)
My Windows machine uses a DHCP assigned IP address (10.100.150.213)Both Linux and Windows machine are configured to access the gateway server (10.100.150.1)So, I can ping the Linux machine from the Windows machine and vice-versa.I can ping the gateway machine from the Windows machine.I can browse Windows Shares on the network via SMB from the Linux machine.I CANNOT ping the gateway machine from the Linux machine with the Destination Host Unreachable message being the error message.
For actual internet access I need to access a proxy server but since the Linux machine can't even ping the gateway server, it fails to ping the proxy.Now, I have been told the gateway is a HW based router and for Windows machine they use some software for authentication to connect to the network. This software isn't available for Linux, so that's why I've been told to use a fixed IP address.My experience of networking is pretty basic and most of the Linux setup is done via running Slackware's setup program.
View 12 Replies
View Related
Aug 18, 2010
I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies
View Related
Jan 26, 2010
FTP is not working through a gateway and I think I found that I need to modprobe ip_masq_ftp. However, when I do try to load ip_masq_ftp I get the error: FATAL: Module ip_masq_ftp.o not found.My question is: how do I get ip_masq_ftp?More questions: Do I have to build a new kernel? If I do need to build a new kernel do I just include the ip_masq_ftp module or are there other modules that I need?
View 1 Replies
View Related
Jun 21, 2010
What i need to do is setup a gateway with 2 red networks, reason being 1 is my internet connection and the other is my bDSL connection for our IP phone system and i need an IP range of traffic routed to the bDSL rather than internet, i can do this on individual PC's but id like to do it at the firewall level so i dont have to configure each machine on the network.
basically i want all traffic to go to internet except for say 203.x.x.x which i want routed to the bDSL router and let it handle it. Ive dome some reading and it seems ipcop and smoothwall cant do it so i was hoping with some tricky work maybe i can get ubuntu to do it for me.
View 2 Replies
View Related
Feb 12, 2011
I can ping my IP, and other PC in the same LAN, but I CANNOT ping the gateway on my 10.04LTS ubuntu. Other PC in the same LAN(Ubuntu 10.04LTS) could ping the gateway and my IP. I thought that (1)network cable is OK because I could ping the other PC in the same LAN.(2)Gateway is OK because other PC could ping it. (3)setting of operating system might be somehow wrong.
I have tried to restart the network several times and still not works. I followed the HOW-To debug tips and following is the results. Any suggestions?
1. ifconfig
eth2 Link encap:Ethernet HWaddr 00:1d:7d:aa:d5:d3
inet addr:140.112.61.75 Bcast:140.112.61.255 Mask:255.255.255.0
inet6 addr: fe80::21d:7dff:feaa:d5d3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 2 Replies
View Related
Nov 11, 2010
My wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.
View 2 Replies
View Related
Sep 10, 2010
I have two Linux computers and one small home router with DHCP functionality. I configured the router with the "dynamic DHCP" setting, ie, the static DHCP with MAC-Address was not used. Before that, I used the manual IP configuration, defining the two computers' names in the /etc/hosts file.
Example:
10.0.0.2 comp2
10.0.0.3 comp3
Now, with DHCP, the above example is no longer appropriate, because the DHCP server is supposed to tell the computer what IP number it will receive. However, I am missing something, because I haven't figured it out yet how to make one computer know the other computer's name. Is it that I haven't installed a name-finding package? Is there a simple way to accomplish this (one computer finding the other computers' names)?
View 9 Replies
View Related
Sep 21, 2010
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies
View Related
Feb 5, 2010
My Laptop is connected to 2 different network (Wireless "gateway 10.170.8.1" ;cable wired "gateway 192.168.1.1")the gateway 192.168.1.1 is the default i want all application like firefox that connect via http and https port 80 and 443 to use the gateway 10.170.8.1)
else to use the default gateway
View 1 Replies
View Related
Feb 23, 2010
I have installed ubuntu 9.04 Jaunty server from disk. I am connect to my corporate internet. I have put in my http_proxy everywhere I can find to put it. I am getting an ipaddress, gateway, broadcast,etc. My wired is connected. When I try to ping my default gateway it times out. %100 packet loss. I get the ipaddress of the gateway from the (route command).
My configurations on /etc/network/interfaces is correct(I am on another computer so I can't copy and paste) and I even tried updating the drivers for NIC card. I am using a Intel 82567LM-3. I have been working on this longer than I care to admit.
View 7 Replies
View Related
Mar 4, 2010
I live on a property with 3 other units and we all share a cable connection. There's a modem connected to a wireless router (I'll call it the "main" router), which until recently I connected to with an 80' or so long ethernet cable because I don't get a good signal, and all I've got is a desktop anyway. When plugged directly into the main router, I can get very fast download speeds - the fastest I've seen over bittorrent, for example, is about 2.2 Mb/s, and it's over 1 Mb/s most of the time for popular torrents or sites with good bandwidth. A friend with a laptop is staying with me for a month, so I wanted to set up a wireless router in my home, and my desktop needed to be moved to a location where running a wire is kind of awkward, so I planned on using the wireless too.
I don't have a spare proper router with an uplink port laying around, but I did have a spare DSL modem/wireless router combo (which I'll call the "secondary" router) that I used to use at a former residence, and I thought I'd try to use it here. I plugged it into my computer, configured its security settings how I wanted (64-bit WEP) and looked through for settings that seemed like they might pertain to using it in this capacity. I didn't really find any except for something that seemed to turn off its DHCP, which I did. Then I unplugged my computer and plugged in the ethernet cable that runs to the main router (which is a normal ethernet cable, not crossover). I found that this setup does "just work" for the most part - our computers see the signal and can log in and access the internet through the main router's cable connection. However:
1. I can't figure out how to access the secondary router's settings once it's been plugged into the main one, even if I unplug it from the main one. What happens is that as soon as I connect the two routers together, it's almost like the secondary ceases to exist independently until it's settings are purged via the reset button. I plug it's IP address into a browser like usual, and nothing happens (it's an Actiontec whose stock one is 192.168.0.1 and the main router is a Netgear with an IP of 192.168.1.1).
I can log into the main one like normal through a wireless connection to the secondary, though. If I look at "attached devices" in the main router's config, it lists all the client computers in the network, but there's no IP that could be for the router (I'm sure of this). Each computer connected through my secondary router gets assigned its own IP like normal, and port forwarding works without a hitch. Again, this persists until the secondary is reset - after the two routers are connected but until the secondary is reset, there doesn't to be a way into the secondary's config. The security settings are acting as they should, though (ie, you need the secondary's WEP key to log on).
2. Internet download speeds when connected to the secondary over wireless are extremely slow compared to what the connection is capable of (can't seem to top 90 Kb/s) but for some reason the max attainable internet upload speed seems to be about the same as normal (around 200 Kb/s). This is puzzling to me. Back when I was using the secondary router for it's intended purpose as a DSL gateway under XP, I downloaded at around 300 Kb/s all the time with it using the same wireless card I am now, so I know the hardware I have is capable of it. Now both of our wireless cards are getting the same mediocre speeds (seemingly bottlenecked at around 90 Kb/s), even with a full signal (ie, the computer right next to the router).
If we connect to the secondary router with a cable rather than wireless, there's no problem and downloads are really fast (note again though that the max upload speed doesn't seem affected whether wired or wireless, as determined by running internet speed tests in both configurations). Ping times over wireless are also extremely high - ie, 800ms+ even when pinging the main router at 192.168.1.1.
It almost seems like there's something inferior or bottlenecked about the wireless signal the secondary router puts out, but I don't know what that could be or how to change it. (I also don't really understand anything about the setup I created here though, other than that I plugged it in and crossed my fingers and it works for basic, non-bandwidth-intense tasks). basically I'm curious whether there's a way to have normal access to the secondary router's settings in this setup, and whether there's a way to make the bandwidth over wireless less mediocre.
View 3 Replies
View Related
Jun 19, 2010
Whenever i used to setup a new connection in Windows it would just ask me User name and password here i need to fill up something called as "Gateway" !? The connection won't be accepted unless i fill up something in there... So, what do i put in there? I'm on a LAN of 3 computers connected with a router.The router takes one wire as input from the modem(cable).
View 9 Replies
View Related
Jun 19, 2010
This Ubuntu desktop has 3 network interfaces:LAN eth0: ip address 192.168.3.6 gateway 192.168.3.1VPN tun1: ip address 192.168.7.4 gateway 192.168.7.1VPN tun2: ip address 192.168.9.2 gateway 192.168.9.1For Chrome or Firefox, by default the 192.168.3.1 gateway is used.How do I change this such that:I can manually choose the 192.168.9.1 or 192.168.7.1 or 192.168.3.1 gateway.From the command line.Before running Firefox/Chrome.Without re-configuring any network interfaces.So that ONLY Firefox and Chrome browsers are affected
View 1 Replies
View Related
Jul 5, 2010
I can't see any wireless networks with 10.04 Netbook version. iwconfig gives me this:
lo no wireless extensions
eth0 no wireless extensions
wlan0 IEEE 802.11bg ESSID off/on
View 2 Replies
View Related
Feb 27, 2011
This might well be user error, but I can't get my dual homed server to gateway.
There are two NICs code...
It was working, until I was messing around with the patch cables and managed to get them swapped over. I've corrected them now but it no longer seems to pass packets between interfaces. I noticed because squid (transparently proxying) stopped working, other stuff on the box (postfix, dovecot, getmail, dnsmasq) is working fine, the internal NIC is visible from the internal network, the external NIC can access the 'net.
I've rebooted (more than once) but the problem persists, any network gurus spot anything obviously wrong?
View 2 Replies
View Related
Aug 4, 2010
I recently upgraded an Ubuntu 8.04 server to 10.04 server. My previous configuration had two network interfaces both routed to the same LAN with the same gateway. This functioned for me so as to support different services on each interface, such as http and smb on one, torrents on another. This routed fine in 8.04 (routing table below). Once I upgraded to 10.04, any packets that traveled beyond the LAN did not return. I checked and there is no local firewall running. Thinking that this was strange I set up a virtual machine and tested it in a different environment at work (and also with a virtual firewall configuration) with the same results.
I also tested several other current operating systems, including Debian 5.04 and Open Solaris 9, all of which routed two interfaces with the same gateway fine. I rolled back from 10.04 to 9.10 and the problem persists, so the change exits also between 8.04 and 9.10. at least identify what is unique to Unbuntu 9.10 and above that is preventing having two interfaces with the same gateway, something that other operating systems do not seem to have trouble with?
[Code]...
View 1 Replies
View Related
Oct 28, 2010
i have an ubuntu server box as my gateway and firewall. for days at a time itll run fine, then one or two days out of the week, it will drop connection often because it drops its ip addr. when renew an ip, itll work fine for about 5 minutes and drop again.ive tried different nics, different wire, my logs dont mention anything, my cron files dont have anything suspicious.
View 8 Replies
View Related
Jan 10, 2010
With hardy, I was able to have multiple SSL sites on the one machine. But I can't seem to get it to work for ubuntu 9.10, I've read that you need to put each SSL site on a different IP. But I was able to do it with hardy without different IP's.
View 4 Replies
View Related
Aug 2, 2009
I have a server with 192.1.9.10 ip address and I want to define two gateways with ip: 192.1.9.4 and 192.1.9.254 on it but I don't know how I can do it. I don't have professional information in linux.
View 1 Replies
View Related
Jan 1, 2011
I've rent a server from a Germany data center,They use a single IP as their gateway that is not in range of my servers IP,Strangly server is working well and when I use 'route -n' command the gateway which is in other subnet appears properly./etc/sysconfig/network contains no gateway IP and I don't know how they set the default gateway while after reboot the gateway is the same, also the IP is static and there's now DHCP.I need to know how they did it so I can do the same on my VPSes.
View 1 Replies
View Related
Jul 12, 2011
I have 2 lancard eth0 connected to local lan eth1 connected to bsnl broadband connection, I have centos 5.3 here I configure broadband in dial up mode. I am unable to ping outside world and unable to access some site but able to access internet like google etc, configure file is as:
eth0 Link encap:Ethernet HWaddr 00:14:85:96:1C:A7
inet addr:182.x.x.24 Bcast:1182.16.255.255 Mask:255.255.0.0
inet6 addr: fe80::214:85ff:fe96:1ca7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:736487 errors:0 dropped:0 overruns:0 frame:0
TX packets:859918 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:122617961 (116.9 MiB) TX bytes:772581200 (736.7 MiB)
Interrupt:185 Base address:0x6000
eth1 Link encap:Ethernet HWaddr 00:08:A1:7B:A0:F9
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::208:a1ff:fe7b:a0f9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:658246 errors:0 dropped:0 overruns:0 frame:0
TX packets:620456 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:728744445 (694.9 MiB) TX bytes:100768525 (96.1 MiB)
Interrupt:193 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:21198 errors:0 dropped:0 overruns:0 frame:0
TX packets:21198 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5867015 (5.5 MiB) TX bytes:5867015 (5.5 MiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:59.xx.xx.xx P-t-P:59.xx.xx.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1460 Metric:1
RX packets:793 errors:0 dropped:0 overruns:0 frame:0
TX packets:968 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:528818 (516.4 KiB) TX bytes:148274 (144.7 KiB)
[root@venus ~]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
59.xx.xx.1 * 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
169.254.0.0 * 255.255.0.0 U 0 0 0 eth1
182.xx.0.0 * 255.255.0.0 U 0 0 0 eth0
default * 0.0.0.0 U 0 0 0 ppp0
I am unable to ping gateway of ISP IP i.e gateway of static IP.
View 1 Replies
View Related
