I'm trying to connect to my windows 7 computer via network from ubuntu 10.04. I get as far as this screen:
My problem is it always says I've entered the wrong password. I've tried the administrator account password and also the long windows 7 homegroup password.
tl;dr: what kind of password is it looking for?
I'm running PCLinuxOS with no other OS installed. Thought I'd have a go at chainloading. just for interests sake.So, I opened Konsole, entered su and entered my root password. The command line turned red so, I imagined all was well. But when I then keyed in '/boot/grub/.menu.lst' I was refused access.
View 10 Replies View RelatedI'm running Ubuntu 10.4 Netbook Remix on a Dell Mini Netbook 9 (I think that's what it is.) I used to be able to connect to my wireless internet fine, but then my brother put a password on it. So there's a little box that comes up and tells me to enter a password now. I do, and it tries to load for a minute and then wants me to enter my password again. It just keeps going like this.
View 9 Replies View RelatedI was tired and went to delete a directory and its content and forgot to specify the directory name, i entered: rm * -R
Now lost all what was in my home directory (((
HELP, i must get those files back, what can i do?
I am an old Ubuntu user and have just strted running F11 on my iBook. I always run system-config-samba on all my machines including my server and even on my work server which shares with windows, Linux and OSX and have found it to be perfect. I installed it straight away on the new Fedora system but It doesn't seem to be functioning the way i expected it to.
I installed system-config-samba and then set up one share folder "Public" with open read write privileges and then turned off the Fedora Firewall all together. But "public" did not become open until I entered the user password for the fedora machine. But, then I could see all folders on the Fedora machine. Even root on the fedora machine became write-able on the network. This was not the desired effect at all. I am assuming fedora is using a non system-config-samba file share system that I am unfamiliar with. what is it? and how does it work?
I had the CAPS Lock on accidentally during my Ubuntu installation, when I entered in the root password it was with CAPS.Now I am stuck having to hit the CAPS lock back and forth for password entry to perform various sudo tasks.I have tried several methods below:(not my real password) Current password in CAPS: 2HOTDOGS Desired password: 2hotdogs
Code:
sudo -i
sudo passwd root
[code]....
Recently I was trying to download some software from Ubuntu Software Center. I found the app I needed, pressed install, entered my password and then i got an error window with this written in it: 'The installation could have failed because of an error in the corresponding software package or it was cancelled in an unfriendly way. You have to repair this before you can install or remove any further software.'
The problem is that I don't remember what I downloaded or when I did it.
This is mostly an FYI. I have been messing around with an old desktop to see what I could do.
I installed an image of XP, then tried installing Ubuntu. I chose the option to install along side XP, and adjusted the partition size. The install gets to the point where I create my password, and I get exactly 4 characters entered in the first password field and it freezes. It did the same thing on two consecutive installation attempts.
I just got a new laptop for work that dual boots with Windows 7 and Ubuntu 10.10.Normally, I can use an sslvpn connection to log onto my office servers to transfer data back and forth through Windows. However, I do my actual work on Linux, which the computing services department at the university where I work has not set up a sslvpn connection method for.I got the JRE set up on Linux and loaded up the sslvpn connection when I was asked for my sudo password. After following some other instructions, I created a different password to act as root.I entered that password over and over again and now I'm not able to attempt to connect again by trying another password.
View 3 Replies View RelatedThe login cycles- I already have a problem with mounting something connected with USB (long term minor annoyance, but everything works), but suddenly I cannot log in. When I put my username and password in, the screen flashes black for about half a second, then the login screen re-appears. If I put the wrong password in, I get an authentication error message (as expected) without turning black and then cycling again.
I have no problems going into terminal mode and logging in. I've tried all sorts of suggestions related to this problem- reinstalling ubuntu-desktop, apt-get clean, sudo startx, and the last indicates that x-windows is already running. I've found a couple more things to try, but I'm not too sure how well they'll work. It seems to be connected with x-windows, but I don't know what is causing it. Last night I had a big problem that required reinstalling nautilus (couldn't set up a connection to a remote server), and that problem was fixed- but this developed when I booted this morning.
When I try to connect to my ubuntu server with my mac, I always get "You have entered an incorrect username or password, please try again". The same problem occured when I tried to connect to another mac server at my school. Is this a mac wide problem? Anyone else experienced this problem?
View 3 Replies View RelatedI work on a product that have to start automatically an application. Running Opensuse 11.2 So in the inittab I have : 1:2345:once:/root/Velox/VeloxBoot.sh 2:2345:respawn:/sbin/mingetty tty2
In the VeloxBoot.sh, if I don't press any key, my application starts after a timeout. If the user presses a key I want to have a login prompt. Unfortunately, if I start /bin/login, I have a prompt with login, but once I enter my login, it does not ask for a password and it says wrong password
I've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
View 9 Replies View RelatedThese problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.
Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?
[Code]...
I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.
I downloaded and installed Ubuntu-Server 11.04, then installed XFCE as a light weight, fast desktop. Then I installed Synaptic from apt-get. Now, Synaptic complains that I am entering the wrong password. I cannot log in to Synaptic at all.
View 3 Replies View RelatedF10 trying to key in static ip address. Have followed guidelines on turningoff NetworkManager and turning on network. i went to command line and did a couple of chkconfig things and entered ip address, with subnet. when i do ip addr show i see under eth0 inet 192.168.3.11/32 which is 255.255.255.0, i'm pretty sure. i do not see gateway. when i go to system/network get prompted to log into root, network config window opens. icheck eth0 and the subnet mask is 192.168.3.1, the gateway, which is in correctly, in the gateway slot, as well. i still can not ping to from my xp based multihomed router.
View 3 Replies View RelatedI want that in the phase of "login" and in the phase of "lock screen", if password is wrong, then Ubuntu runs my custom command.
View 3 Replies View RelatedIs there a way to have the system shut down automatically after a set number of wrong user password entries? Am using ubuntu and kubuntu on two different machines. Am thinking it would make sense to have this feature on an encrypted laptop system in case someone were to take it whilst it's on suspend, screenlock, hibernate or login screen and hence the disk is vulnerable.
View 6 Replies View RelatedI am starting to learn how to create and manage users in my computer. I created a new user and changed users
I then tried to install a package with this user to confirm that it needs su rights, and when asked for the password, I entered it wrong
john is not in the sudoers file. This incident will be reported.
It says that the incident will be reported, but where can I find the information of this incident? where is it stored or how is it reported?
I did a fresh install on this computer, ubuntu 10.10 server then put desktop on top of it.
I can run sudo -i, enter password, gain root access, but when i click system -> administration and it asks for my password, it always says my password is wrong.
I ran update manager, and my password worked fine there.
When i click system administration and run a task, the password screen looks different
Little more digging shows, it only occures on screens that use the login type of,
Enter the administrative password:
It doesn't even give me options for what user to use. And I am using the account created on install.
I've installed kubuntu in ubuntu 11.04 using the synaptic manager updates. After the completion of installation & after the reboot it is asking username & password, when I enter my ubuntu username & password it says it was wrong...
View 1 Replies View RelatedSeems like a nasty bug in F13.after typing in wrong password, a 2nd correct attempt on gdm (or kdm) leads to a dark screen with a dash cursor blinking on the upper left - have to turn machine off. Then on next login, memory seems to race until properly shut down.
View 7 Replies View RelatedI'm wondering if I can get an answer to this oneI'm pretty new to Ubuntu, been using it off and on for a few months now. Right now I'm using Lucid and I have no problem connecting to the other PC's in my house that run Windows 7, however when I try to access them it asks for a password. I disabled the password on the Windows PC, so is it possible to get into them without a pass? If so, how
View 3 Replies View RelatedI'm using Ubuntu 9.10 and trying to install a printer over the network which is plugged into a Windows 7 machine. I can see the workgroup fine and the computer fine on the network, but when I try to double-click on the computer (both via the nautilus and the printer setup route), it asks me for a username, workgroup and password.
I tried the account's username and password and username "Guest" with no password but neither worked. The weird thing is that when I booted my machine into Windows XP and tried to install the same printer, it never asked me for a username and password and installed just fine. Why is Samba/Ubuntu asking me for the Windows 7 password when Windows XP didn't need it?
We have a computer here with stuff on it we all use. If I load up my Windows XP VM and open it through My Network Places it loads up just fine. In Ubuntu Nautilus complains that it cant mount the share. If I do:
sudo mount -t cifs //tech1/e /mnt/tech1
it asks for a password. There is no password.
I installed ubuntu in a desktop pc and without configuring anything i had my network working: 1 windows 7 pc which is sharing a folder with other 3 windows pc and with my ubuntu pc. Yesterday as every day before i entered into win7 shared folder from ubuntu but it asked me for a password which was not set up in win7 pc.
View 5 Replies View RelatedI've looked at all 250 threads that come up when I search "Windows network password" and can't seem to find the answer. On my win7 box, when I try to connect to an Ubuntu share on my ubuntu box, it asks for username and password. I have tried my ubuntu username and password, the windows networking password, and my win7 user account name and password, and I cant get in.
View 1 Replies View RelatedI have a Samba installed and configured on a Ubuntu Server 10.04 box, as a file server, not as an PDC. And I have several Windows 7 machines accessing the Ubuntu Server to store files.
I would like to let users to change their passwords from windows.
We have Ubuntu 8.04 running on our mail server and remote smtp connection does not work.
When trying to send with a client such as Thunderbird it complains about a wrong usernamepassword.
Receiving mail with IMAP and POP3 works fine through Thunderbird. Both receiving and sending mail through a web interface(horde) works.
I can remotely telnet the server at port 25 and this is the output of ehlo:
Code:
250-**server address**
250-PIPELINING
250-SIZE 25000000
250-VRFY
250-ETRN
250-STARTTLS
250-AUTH PLAIN LOGIN
code....
At the moment I am having a problem with the MySQL server on my VPS. It's a completely fresh install of both Debian 5 and MySQL but the problem is upon logging in I get:
[root@boris ~]#mysql -u root -p
Enter password:
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)
[code]....
