I had the CAPS Lock on accidentally during my Ubuntu installation, when I entered in the root password it was with CAPS.Now I am stuck having to hit the CAPS lock back and forth for password entry to perform various sudo tasks.I have tried several methods below:(not my real password) Current password in CAPS: 2HOTDOGS Desired password: 2hotdogs
Code:
sudo -i
sudo passwd root
[code]....
I'm running PCLinuxOS with no other OS installed. Thought I'd have a go at chainloading. just for interests sake.So, I opened Konsole, entered su and entered my root password. The command line turned red so, I imagined all was well. But when I then keyed in '/boot/grub/.menu.lst' I was refused access.
View 10 Replies View RelatedI'm trying to connect to my windows 7 computer via network from ubuntu 10.04. I get as far as this screen:
My problem is it always says I've entered the wrong password. I've tried the administrator account password and also the long windows 7 homegroup password.
tl;dr: what kind of password is it looking for?
Recently I was trying to download some software from Ubuntu Software Center. I found the app I needed, pressed install, entered my password and then i got an error window with this written in it: 'The installation could have failed because of an error in the corresponding software package or it was cancelled in an unfriendly way. You have to repair this before you can install or remove any further software.'
The problem is that I don't remember what I downloaded or when I did it.
I'm running Ubuntu 10.4 Netbook Remix on a Dell Mini Netbook 9 (I think that's what it is.) I used to be able to connect to my wireless internet fine, but then my brother put a password on it. So there's a little box that comes up and tells me to enter a password now. I do, and it tries to load for a minute and then wants me to enter my password again. It just keeps going like this.
View 9 Replies View RelatedThis is mostly an FYI. I have been messing around with an old desktop to see what I could do.
I installed an image of XP, then tried installing Ubuntu. I chose the option to install along side XP, and adjusted the partition size. The install gets to the point where I create my password, and I get exactly 4 characters entered in the first password field and it freezes. It did the same thing on two consecutive installation attempts.
I just got a new laptop for work that dual boots with Windows 7 and Ubuntu 10.10.Normally, I can use an sslvpn connection to log onto my office servers to transfer data back and forth through Windows. However, I do my actual work on Linux, which the computing services department at the university where I work has not set up a sslvpn connection method for.I got the JRE set up on Linux and loaded up the sslvpn connection when I was asked for my sudo password. After following some other instructions, I created a different password to act as root.I entered that password over and over again and now I'm not able to attempt to connect again by trying another password.
View 3 Replies View RelatedThe login cycles- I already have a problem with mounting something connected with USB (long term minor annoyance, but everything works), but suddenly I cannot log in. When I put my username and password in, the screen flashes black for about half a second, then the login screen re-appears. If I put the wrong password in, I get an authentication error message (as expected) without turning black and then cycling again.
I have no problems going into terminal mode and logging in. I've tried all sorts of suggestions related to this problem- reinstalling ubuntu-desktop, apt-get clean, sudo startx, and the last indicates that x-windows is already running. I've found a couple more things to try, but I'm not too sure how well they'll work. It seems to be connected with x-windows, but I don't know what is causing it. Last night I had a big problem that required reinstalling nautilus (couldn't set up a connection to a remote server), and that problem was fixed- but this developed when I booted this morning.
When I try to connect to my ubuntu server with my mac, I always get "You have entered an incorrect username or password, please try again". The same problem occured when I tried to connect to another mac server at my school. Is this a mac wide problem? Anyone else experienced this problem?
View 3 Replies View RelatedI've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
View 9 Replies View RelatedWhen I installed the OS, I wasn't prompted to set the root password. Is this a bug, or did my install hose up?
View 4 Replies View RelatedI am facing one problem, whenever I login to my Linux machine with caps lock key on i.e. ROOT inspite of root (password in lower case letter), I am able to login and after that all letters comes in upper case letter only.
View 5 Replies View RelatedI am an old Ubuntu user and have just strted running F11 on my iBook. I always run system-config-samba on all my machines including my server and even on my work server which shares with windows, Linux and OSX and have found it to be perfect. I installed it straight away on the new Fedora system but It doesn't seem to be functioning the way i expected it to.
I installed system-config-samba and then set up one share folder "Public" with open read write privileges and then turned off the Fedora Firewall all together. But "public" did not become open until I entered the user password for the fedora machine. But, then I could see all folders on the Fedora machine. Even root on the fedora machine became write-able on the network. This was not the desired effect at all. I am assuming fedora is using a non system-config-samba file share system that I am unfamiliar with. what is it? and how does it work?
I m Trying to get vsftpd usergroups to work i accidentally moved a file called passwd from /etc/vsftpd/ to /etc/, resulting in my root access is destroyed! how to restore the passwd file so i can keep working, or do i have to re-install the entire box?
View 4 Replies View RelatedI'm really new to Linux so this will probably sound like a pretty naive question to most users, but how do you change the root password?To install Java, I have to type # su into Terminal,which then asks for the password.What's weird is that when I start typing a password, no characters show up. I don't know if this is supposed to happen or not.I've found a bunch of different sites on the Internet that explain how to change the root password, but none of them seem to work for my specific work station.
I've got Ubuntu 9.10 64 bit. In the GRUB boot menu, I can choose to boot normal or in recovery mode (I'm led to believe older versions don't have this option).I've tried typing # sudo passwrd into Terminal, but I already have a root password set up apparently, so I can't change it there.
I no longer have access to my root desktop. On a session I attempted to change the root username but i apparently assigned it a wrong directory that does not exist. When I rebooted with my new root username, i was instead recognised as a simple user (no root privileges). I tried the console to change to "old" root but root password is not accepted and there is no way to access to sudoer files. it seems that inserting a new username requires root privileges and i am back to square one. Simply logging with old root username and password after restart gives me a blank screen with nothing on it and cannot even reboot.
View 9 Replies View Relatedi used opensuse 11.1 ...there is option for root user to create password for root...but for ubuntu i did not find anything like that...so how can i create root password....or how can i use root
View 1 Replies View RelatedCan I change the Caps Lock key to Control and still keep the on/off nature of Caps Lock? I've checked into using xmodmap and seem to have hit a dead end. Many people want to swap them, but they also want to swap the way they work. I'd rather keep my new Control key as an on/off switch for Control.
View 1 Replies View RelatedI am an absolute Linux Beginner who is being required to do a bit of admin work because the boss just fired the old linux admin. Unfortunately, one of our employees cannot remember her password to her email account and as such I need to reset it on our linux server.What I want to check is that this email account is actually a linux user account and I simply will reset the password for it using the passwd command from the root login. Is that correct?
View 1 Replies View RelatedA friend of mine has told me to set a root password and use root (f.e. switching to su in terminal and work with root rights instead).Is there any way to unset the root password? I know how to use sudo now.
View 9 Replies View RelatedHow to recover user password and root password in fedora if u forget
View 2 Replies View RelatedI was trying to edit a file requiring root permissions, so I used sudo. I typed the root password and it failed. This happened three times, and the process was ended. I then logged in as root (su) and was able to navigate to the file and make changes as root. Am I missing something? How would I edit the sudoers file such that this password would work? Or is there another way to log in to the sudo group to make these changes? How do I set sudo passwords?
View 1 Replies View RelatedUbuntu is installed in dual boot in my machine. I created only one user and unfortunately I forgot the password. is there anyway to recover this password or better have the root password?
View 1 Replies View Relatedi forgot root password and how to change the password
View 3 Replies View RelatedAt the RHEL prompt, I entered the standard user's username/password combo. Linux displays a message box stating:"Your account has expired; please contact your system administrator."Next, I entered "root" in the username field and entered the root password (which expired also--keep in mind that passwords are set to expire after x days). Linux displays a message box stating:"You are required to change your password immediately (password aged)."When prompted to "Enter current UNIX password", I entered the new password (was that the right thing to do?); Linux displays a message box stating:"The change of the authentication token failed. Please try again later or contact the system administrator."I rebooted the system and got into command line mode; somehow I logged in as "root" (don't know exactly how, but needed to change the password there). At the "#" prompt, I type "passwd root"; Linux displays the message "Changing password for user root", followed by the message "passwd: Authentication information cannot be recovered.
View 4 Replies View RelatedI edited fstab to automatically mount my windows data partition on boot, but I screwed it up by not specifying the file system type, however that is not the problem, I was able to fix that easily. The problem was that when it failed to mount the partition, Debian automatically entered root and I guess that is to be expected in order for me to fix it, but I never configured a root password and it just gave me full root access without asking any password, not even my user password. I though that was strange so I set the root password and sure thing it asked me for the root password this time without automatically logging into root....
I then tried to lock the root account to see if it will ask me for a password or not, it did but of course I wasn't able to login as root because it was locked now and I was left with no way to access the system. I had to fix fstab from a live cd so that I can login normally as the user....
I didn't know what to search for or if that is the expected behavior if you don't set root password during installation, but it just seemed a bit strange to automatically enter root when you specifically disable root login during installation...
I found this on Bee's website. For more info on this exploit there are links there:[URl]..All you have to do in Fedora 13 is enter the following lines in a shell as normal user:
[Code]...
I don't think this can be considered solely an "upstream" problem, because I first tried it in Arch using the same version of glibc, and the final command causes both gnome-terminal and xterm windows to disappear.
I am trying to log into a server with a particular account. Let's say I don't know the password for that account. Can I do this using ssh? I am wondering if it is possible to do it in one command, instead of logging in as root and running su.
View 4 Replies View RelatedI want b able to recover or reset the password that i lost. I have ubunto installed with windows vista. I used the following link for guidance: [URL].. tried recovery mode in grub it always asks me the same thing:"Give root password for maintenance". I also tried to edit and boot the kernel unfortunately it did not work. So i never have a prompt, it still asks me for the password.
View 2 Replies View RelatedI installed yesterday two versions of Ubuntu: Ubuntu 9.10 Desktop and Ubuntu 10.04 Alpha 3.At both versions, I saw that, during the installation process, it did not required at any time to set the password for the root user. But afterward, when I needed to make some configuration for network connection, it was necessary to input the password for root. And I was logged as a regular user. So, how could this issue be solved?
View 1 Replies View Related