Bus 001 Device 002: ID xxxx:8176 Realtek Semiconductor Corp Is there driver for this wireless USB dongle? At least it does not load when plug-in like rtl8187.
View 9 RepliesI've just installed Ubuntu 10.04 on my samsung n150. It has the 8192 device in it. Have installed ndiswrapper, however cannot get the drivers for it. How to fix/where to get the driver from so I can get my wireless card working again.
On lspci:
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) .....
I think the driver may be there, however I just can't 'enable' it. On my laptop there is a blue light saying that wifi is enabled however who knows.
I've recently installed Ubuntu 11.04 and everything has been working great, except I cannot see ANY wireless networks, Wired works fine, and while on Windows 7 I can connect fine.lspci -v gives me a wall of text, the end is:
Quote:
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8192E Wireless LAN Controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device 8152
Flags: bus master, fast devsel, latency 0, IRQ 17
I/O ports at 2000 [size=256]
[code].....
I found a few fixes which I tried to use, to no sucess. updating drivers, turning router on/off, turning wireless switch on/off, various other fixes from ubuntuforums. tried to upgrade to Natty Narwhale to see if the problem worked it's way out, to no avail. I've spent two days trying for this. Anyone out there willing to point me in the right direction or hold my hand?
View 7 Replies View RelatedThis is the wireless card that came with my Toshiba Satellite L655D-S5093. First check to see if you have the correct driver. Run
[Code]....
I have a problem with my internet connection this is the picture the device is Realtek RTL8187. i didn't know how can i manage this device to work so could you help me i don't have an internet connection in ubuntu right know and i really wanna move to ubntu my verison is 9.10
View 9 Replies View RelatedI have a ThinkPad x100e with a wireless card.Code:03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)my problem is that I can't connect to my wireless network with Gentoo. I've been running Slackware64-13.1 on this computer and now have Windows 7, Ubuntu and Gentoo installed. Slackware, Ubuntu as well as Windows 7 connect to the wlan without problems. I'm using the driver rtl8192se, the module is loaded r8192se_pci and is the same with Slackware and Ubuntu.
I've read many posts and found that other people experience problems with Realtek wlandevices as well. But I have no Idea how to get connected with Gentoo at my wlan. It looks like that the netbook is connected for a very short time, but when dhcpcd broadcasts for a lease the connection is already closed.
I am running fedora 14 and have tried to setup VPN access to work. I used the simple networking GUI program. Another engineer at work uses ubuntu and that is how he accesses the VPN. I think that I did everything right but get this generic 'VPN connection failed' message. I am trying to connect to a monowall firewall and have the IP address. Yes, I have an account but am just trying it for the first time. I turned on all of the options available which seemed correct based on the instructions that I had. I have contacted my sys-admin to try to find out what the monowall doesn't like. However, I am wondering if I might need to open an outgoing port on my linksys home router/firewall and, if so, which one?
View 2 Replies View RelatedDecided to upgrade my usb bluetooth dongle because it is slow, old and bulky. Bought a Konig (broadcom) mini dongle. Ubuntu (natty) shows me a bluetooth icon and appears to be working. But: It doesn't find anything, nor can it be found...
lsusb:
Quote:
It looks like there is no module loaded for it. Does there need to be?
lsmod:
Quote:
I have an IBM ThinkPad W700 running 64 bit Ubuntu 9.10 Karmic Koala. At the office I normally connect it to the Ethernet since it's never connected very reliably to the wifi there (drops out 2 or 3 times per day, usually at the worst possible time, of course), but it always worked just fine with Netgear WGR614v5 at home... until a week or two ago.
I used to be able to come home, take the laptop out of suspend mode, and it would connect to the wifi. Occasionally there'd be some hitch and I'd have to restart the network manager (sudo /etc/init.d/network-manager restart) but this was only sometimes, and when I did, it'd always work. But now, when I get home from work, I need to restart the entire system to get it to connect properly again. Without restarting the whole system, it either doesn't scan for wifi networks, it doesn't find any wifi networks, it keeps stuffing up my wifi password, or it connects and gets 0% signal.
Presumably, some driver was updated recently and it doesn't work so well. What's the easiest way to find out what drivers have been updated lately, and revert to a previous version? And what else can I try restarting so I don't have to restart the entire system? I've tried /etc/init.d/network-manager restart, /etc/init.d/networking restart, /etc/init.d/network-interface restart, and restart network-manager. I've also tried turning the wireless switch at the front of the laptop off and on, many times.
Code:
$ lspci -nn
[...]
03:00.0 Network controller [0280]: Intel Corporation Wireless Wifi Link 5300 [8086:4236]
[...]
$ ifconfig wlan0
[Code]...
The info above is when I've taken my laptop out of suspend mode and it won't connect to the network. lsmod doesn't say anything about wifi nor wireless; iwlist does see my network, which my older Januty laptop is connected to without drama.
Installed a TP-Link TG-3269 Gigabit card in a machine running OS 11.3 32 bit, when I go into Yast, Network Devices, Network to try configuring the card I get this errormsg: Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. Couldn't find any mention of the card in dmesg's output, (though the 8139 onboard card is in there) there is some stuff about pci host bridge but I don't know whether they would be relevant or not
The chip on the card says it's rtl8169sc but lspci lists it as being 00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8369 (rev 10) Done some googling and there don't seem be any drivers for a Realtek 8639 and it returns no matches from a search on realtek's site, but there is a driver there for rtl8169sc chips, which I downloaded and installed, no errors when installing it Even after a reboot I still get the same error in Yast's Network Settings screen, lspci still lists it as 8369 and the device isn't listed at all if I run ifconfig
What is correct driver for 10.10 for a nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3) (prog-if 00 [VGA controller]).
Originally, xorg driver 1.9 would work, now it won't.
My system is an Altix3000 running: (Linux sgialtix 2.4.21-sgi304r1 #1 SMP Sat Jan 29 22:43:29 PST 2005 ia64 ia64 ia64 GNU/Linux) (redhat-release=redhat-release-3AS-8.3). Which command do I use to list World Wide Name information of the QLA2300 HBA? I tried /proc/scsi and /proc/xscsi but I found nothing there.
View 2 Replies View RelatedI have installed squeeze and kernel 2.6.32-3 Also I use the USB webcam Asus. A week ago I installed lenny, my webcam didn't work, then I made upgrade to squeeze and my webcam worked! I don't know why Yesterday I have installed the system again, the base system as lenny (net-install) and then squeeze. But webcam doesn't work
[Code]...
I am brand new to ubuntu (I installed it about 2 hours ago on my new PC). Everything so far has seemed really easy and straight-forward, but I am having problems trying to connect to my wireless network.
I have a Realtek 8185 wireless card, and have the disk with the inf file on it. I installed ndisgtk but when I pointed it to the inf file, I got an "error while installing" message, then it showed up in the list of currently installed drivers in ndisgtk but as an invalid driver. I'm not really sure what I'm doing wrong.
I actually have another wireless card in my old PC (a belkin of some sort) - would I be better off using that? I'm using an ethernet cable at the moment and it works absolutely fine, I just plugged it in and off I went.
I have a white label netbook with the Realtek RT8187SE Wireless card on PCIe. It is not detecting wireless networks consistently. When I am even 1 meter from the wireless router, I get no networks in range, but sometimes I pick up networks that are more than 20 meters from me. I can not connect, even if it is unsecure.
WiFi Radar does not detect the card. If I run a system check on the PCI bus I get the following: 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22) Subsystem: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller Flags: bus master, fast devsel, latency 0, IRQ 17
[Code]...
I've had this problem ever since I've installed this ethernet card in the PC (after the 'effin integrated one blew off for some reason), I wasn't ever able to make the networking work again. Every time I try to trigger the PPPoE connection (DSL), the PPP configurator keeps on looking for the concentrator, reaches over 100% and stayed like that for 1 hour. Here's the terminal log of everything that I've tried:
Code:
~$ sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8139D [Realtek] PCI 10/100BaseTX ethernet adaptor
vendor: Hangzhou Silan Microelectronics Co., Ltd.
[Code]...
I have an ASUS M4A785-m and it has the Realtek 8112L gigabit nic. The weird thing is, the 10.10 rc saw the nic card just fine, and windows sees the card so it's not disabled in the bios.
Ubuntu says i have no network connections and i need to get internet. Any suggestions?
I should also note that i'm running from the livecd and lspci shows that it detects my NIC. but my NIC isn't "detected" in that it can be used.
I have tried ndiswrapper using 32 bit and 64 bit winxp drivers and the 32 bit driver just doesn't work period (as expected.) The 64 bit driver locked the system up completely and I ended up reinstalling ubunto. I have now reinstalled and updated and upgraded ubunto 10 times in the last 3 days of trying to get this to work and need some external!
using
Code:
lshw -C network
I do see my network card and driver.
Where I am at currently: I have a fresh install of ubunto 10.04 with it upgraded and updated. I do not have ndiswrapper gtk installed and I have not downloaded any drivers for the wireless card.
Bus 001 Device 007: ID 0bda:8171 Realtek Semiconductor Corp. RTL8188SU 802.11n WLAN Adapter this adapter shows up in network manager when connected to computer but doesn't detect network and cant connect to any network I have setup in nm, the adapter works fine in windows and it's supposed to work in linux or do I have to install drivers?
View 8 Replies View RelatedUbuntu 10.10 - the Maverick Meerkat � (Installed .iso from cd)The router has a password that I'm not sure if is wep or wpa.When I manually put in the address, netmask,gateway, dns,domain my Realtek usb adapter is connecting to the router but is not receiving packets.I got the driver installed with ndiswrapper.I'm trying to figure out wpa_supplicant
View 5 Replies View RelatedI recently installed ubuntu on my computer and when i put in my network wireless usb adapter (Realtek RTL8191SU) it isn't recognize, and the internet doesn't work. When I do lsusb, it comes up with Realtek Corperation however. And also the light on it doesn't flash either.
View 9 Replies View Relatedtrying to get my little Encore USB wireless adapter to work on several flavors of Linux (Ubuntu 10,10, ElementOS, Xubuntu, and Puppy), I emailed tech support at Realtek. I asked where is the Linux driver for this product? I did this because there were no Linux drivers posted on their site and everyone here (and on Newegg) is jumping though hoops trying to get a working wireless connection with the Encore and similar dongles that use the RT8187b chipset. I didn't expect an answer, but felt better after my little vent. I get an email from Realtek with a driver. Realtek needs to promote Jerry -- a beacon of customer service in the age of the "get lost" school of customer relations. I have attached the driver below. Caveat: I have not yet compiled the driver, so I don't know much more about it than I've said already, although the archive appears to contain the source code.
View 3 Replies View Relatedi'm having troubles with setting my wireless driver on ubuntu 11.04
this is the closest i ever got to a solution: i found this [URL] which led me to these drivers [URL] but i have no ideia how to make it work
After having installed ubuntu 11.04 my laptop's wireless device (realtek rtl8192se on a packard bell laptop) disappears on ubuntu 11.04. Before, with ubuntu 10.10, I had no problems. Now, when I start ubuntu 11.04, sometimes the wireless card work, but most of times it doesn't: the wireless led is off, and with the lspci command I got no line about wireless card. If I restart the laptop and I start win7, the wireless card doesn't work there too! only after many reboots and/or shutdowns wireless card appears again.
View 1 Replies View RelatedAfter compiling the Realtek drivers from their page (ver 8.024), installing the module, blacklisting r8169 and updating the initramfs, I still can't get the network card working.The card is listed in lshw as RTL8111/8168B PCI Express Gigabit Ethernet controller.lsmod shows only r8168.dmesg keeps spitting once and again, every second or so the following:
Code:
[ 1293.452274] r8168: eth0: link up
[ 1294.449785] r8168: eth0: link down
[code]....
I have downloaded the driver installed it, and it works fine. But i can't get to turn it off. I do have the ability to unload the driver's kernel modules and the sysyem does not see my card after that. That's ok, but i'm thinking it still uses my battery power. The wifi led is always on no matter what i do. The fn+<wifi key> doesn't to anything.
View 8 Replies View RelatedIm not able to establish a Wireless Internet connection in Ubuntu 10.04.
Ive tried these steps:
1. Wireless Internet did not show via the Network-icon. Only the 2 LAN-gates where shown
2. I installed the Windows Driver (net8185.inf) via ndisgtk package
3. After restarting the computer, 2 LAN-gates and 1 WLAN where listed via the Network-icon
4. Normally WLAN should automatically start scanning for available networks, but that didnt happen
5. When I tried to connect to my own network, the computer tries to connect for 1 minute and than stops because no connection could be established
6. A wired Internet-connection does not give any problems
Details:
- I first had Ubuntu 9.10 but I wasnt able to make a WLAN connection either. I followed the same steps. After that I upgraded to 10.04
- iwconfig in Terminal gives an IP-address which consists of 12 identical characters.
- lspci in Terminal shows these data:
01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
[Code]....
My questions:
- How to create an Internet connection via my WLAN-card?
- How to install the option to search for available networks automatically?
I have installed 9.04 ( I currently have it on dual boot with Windows XP) and my problem is that I have no internet connection. I have a Motorola modem with a Realtek RTL8139 Family Fast Ethernet NIC network card ( it's a wired connection, btw) When I plug in the cable, there's a little animation, but after a while I get the message: Wired connection is not active (or something like that) Here's what I did so far:
1) I ticked the Wake-On-Lan option in XP, since I read it in the forums that I could solve my problem. It did not
2) I turned off my modem, rebooted my system.
3) I deleted the Auto Ethernet network, and plugged in the cable again...no use.
4) I did an ifconfig, since I know that is what you guys really want
evajulia@Derek:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:f3:ab:2b:3a
inet6 addr: fe80::218:f3ff:feab:2b3a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
I recently purchased two MSI Windtop AE2220's. One for my home which uses a router with WPA2 protection and one for my office where I use WEP encryption.
The Realtek internal wireless card will not connect to a WEP router if you are running Ubuntu Lucid Lynx 10.04. I have exhausted all suggestions on this site and all drivers found at Realtek's site.
I have been using Ubuntu since Hardy Heron, but sadly, painfully, I have had to install Windows 7 on my office machine until I find a wireless card compatible with the MSI Windtop AE2220, Lucid and WEP.