Ubuntu Networking :: 10.04 Kernel Update - No Ethernet Connection On Reboot

Sep 18, 2010

I updated to the latest available kernel for Kubuntu 10.04 today (2.6.32-24). When the system rebooted, it refused to connect to my wireless network. So far I have been unsuccessful in persuading it to connect. ifconfig shows the existence of the ethernet connection as eth0, and Network Manager also seems to accept the existence of the ethernet port - so why has it suddenly chosen now to stop connecting to the wired network?

View 8 Replies


ADVERTISEMENT

CentOS 5 :: How To Prevent Kernel Upgrade On Reboot After Yum Update Kernel*

May 29, 2010

The server runs# uname -r2.6.18-128.4.1.el5However, today I executed yum update kernel*due to security advisory. I was just about to reboot the system when I realized that it runs VMWare Server Instance that will most likely fail to restart after kernel upgrade (I had a hard time fixing it after previous kernel update). Now I want to keep 2.6.18-128.4.1.el5 after reboot.I see that new kernel is scheduled for booting:

# cat /etc/grub.conf
default=0
timeout=20

[code]....

View 10 Replies View Related

Networking :: Ethernet Controller Missing After Reboot?

Jun 12, 2011

I use Linux Mint Debian XFCE and there was a large update (lots of programs) I have done prior to rebooting. After reboot, my computer can now no longer find the ethernet controller anymore in lspci, so my wired connection no longer works.

Is this a hardware issue? The green lights are all blinking fine though.

View 1 Replies View Related

Ubuntu Networking :: Ethernet Stopped Working After Hard Reboot?

Jun 13, 2010

My computer wouldn't come out of sleep mode, so I had to shut it down improperly. Now there's no ethernet network connection. The NIC works as I can start the computer by wake-on-lan, but somehow Ubuntu no longer sets up a network connection on it.

The green light on the NIC is lit up and blinking. I have changed no settings. It used to get an IP address from the DHCP no problem, but ifconfig now only shows 127.0.0.1.

View 2 Replies View Related

Networking :: Ethernet Interfaces - Device Activated On Reboot

Dec 28, 2010

The ethernet configuration files are under
"/etc/sysconfig/network-scripts" such as "ifcfg-eth0:1" etc.

The file looks as follow:
Code:
DEVICE="eth0:1"
BOOTPROTO="static"
ONBOOT=no
IPADDR="172.23.17.10"
NETMASK="255.255.255.0"
ALIAS="yes"

I've set the ONBOOT=no. This means this device should not be activated at boot-time. But as I reboot the machine, this device is activated again. This means the option ONBOOT doesn't work. Seems this is a bug of RedHat LINUX?

View 3 Replies View Related

Networking :: Fedora 14 - Ethernet Interface Does Not Get Activated Upon Reboot?

Nov 19, 2010

I have installed Fedora 14 about 4 days ago. I have set all the networking parameters like dns path, hostname etc. I have also ensured that I select the check-box for "Enable automatically when system starts" for eth0 interface. But weirdly, whenever I boot my system(or restart), I see that the interface eth0 is disabled. I have to manually enter as root and enable it, each time I boot/reboot my system. Why is this happening? Could you please suggest a way so that I have eth0 interface enabled always when I boot up?Also, my domainname also is not boot-persistent. What steps should I take to ensure that the domainname set once persists across reboots?

View 12 Replies View Related

Ubuntu Installation :: Wubi Kernel Update Reboot Loop?

Nov 26, 2010

I updated wubi kernel(ubuntu 10.04) After restart, i selected ubuntu then my system reboots. Then i select ubuntu then my system reboots. I dont know what to do now,

View 4 Replies View Related

OpenSUSE Install :: KDE 4.5 Update On 11.3 - Kernel Panic On Reboot

Sep 13, 2010

After reading this article openSUSE News - Forum Users Benefit from openSUSE KDE Repository I added that KDE repo to yast and switched all packages.

After rebooting it says (failsafe kernel configuration says the same):
Kernel panic - not syncing: VFS:
Unable to mount root fs on unknown block (0,0)

And stops at this string: "[<c0203826>] kernel_thread_helper+0x6/0x10" and capslock light is blinking.

View 8 Replies View Related

Ubuntu :: Update Last Week (with Kernel) & Reboot Sound No Longer Works?

Jun 14, 2010

been running Lucid & Karmic for a while now, after an update last week (with kernel) & reboot sound no longer works.Results of 'sudo aplay -l':

Code:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog]

[code]....

View 3 Replies View Related

Ubuntu Installation :: Grub - Ran An Update And On Reboot Get A Kernel Panic Error

Mar 24, 2011

I have a new acer machine which runs fine on 10.10 mythbuntu desktop livecd. Install seemed fine.

Then I ran an update and on reboot I get a kernel panic error. Research on this reveals it as a very deep subject which can consume many hours, so I opted to reinstall.

This time with ubuntu 10.10. I've tried different CDs, liveusb. Same errors.

So, the question is this - where do I concentrate my efforts - somewhere ubuntu doesn't like this machine, or grub. Does a reinstall overwrite the grub install too? Or do I have a bogus grub install I need to purge before I will get anywhere.

View 5 Replies View Related

Debian Configuration :: Ksplice Uptrack That Update Kernel Without Reboot?

Feb 12, 2010

A few days ago on my rss reader, I have read article about Ksplice uptrack that check updates for kernel and update kernel without reboot!

View 1 Replies View Related

OpenSUSE Install :: ATI Driver + Kernel Update: Before Reboot And Complain

Oct 15, 2010

Here's what to do right after applying the latest kernel security patch (2.6.34.7-0.4) to get the ATI driver back to work. Do not reboot yet make sure the update installed the headers and sources for kernel 2.6.34.7-0.4: rpm -qa | grep 2.6.34.7-0.4 should print the files in red on a 64bit system:

[Code]....

View 8 Replies View Related

Ubuntu Networking :: How To Use A Ethernet Connection

Apr 4, 2010

how to use a ethernet conenction(Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller )in ubuntu...my internet requires user name and password ..can u even tell me how to config the user name and password

View 3 Replies View Related

Ubuntu Networking :: Can't Get Ethernet Connection In 10.04?

May 11, 2010

I installed 10.04 today, and I can't get any connection through the LAN. I've tried some stuff on my own, but I've been unsuccessful so far. It's not a hardware or connection issue, as it works perfectly fine in Windows 7. I haven't had this issue in any previous version of Ubuntu (or any Linux distro for that matter).The weirdest part is I booted from the installation CD as as LiveCD, and everything worked perfectly fine. It only stops working after I actually install it. Here's the results of ifconfig:

eth0 Link encap:Ethernet HWaddr 00:17:31:d8:d5:76
inet6 addr: fe80::217:31ff:fed8:d576/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[code]....

View 6 Replies View Related

Ubuntu Networking :: No Ethernet Connection On Karmic

Feb 13, 2010

i shut down my ubuntu karmic for a bit. turned it back on after an hour or so and now i have no network connection. i checked all the obvious things like cords etc wife's computer is connected through the same router / modem and no probs here.i even replaced the card in mine.

View 9 Replies View Related

Ubuntu Networking :: 10.04 - No Wireless Or Ethernet Connection

May 3, 2010

I just upgraded to 10.04. I had wireless connection for 1 day and now nothing. No ethernet connection either. I CAN use both wireless and ethernet using my machine on Windows.....so the connection stuff does work. Here's the output of of the commands I got from the "sticky". I can't display the output as this forum puts it all together as one continuous sentence with no line break!

View 9 Replies View Related

Ubuntu Networking :: Can't Get Connection For Second Ethernet Card

Jun 6, 2010

I'm trying to set up a shared Internet connection that had been broken by a previous update, I believe. Eth0 is connected to the Internet, whereas eth2 should be the connection going to my Roku set-top box. Under the nm-applet icon, an entry exists for "Auto eth0" for the first card, but there is nothing under the second card except "disconnected". How do I make a connection entry under my eth2 card so that I can share my Internet connection with my Roku box?

View 6 Replies View Related

Ubuntu Networking :: Ethernet Connection Not Working / What To Do?

Jul 27, 2011

When I start my Ubuntu machine, it says "eth0 connection established". But i could not able to ping to other machines available in LAN & also to Internet.

View 1 Replies View Related

Networking :: New Ethernet Connection On Old (gutsy) Ubuntu?

Jul 23, 2010

i've just got a new broadband/wireless connection from Virgin Media and am trying to get this very old laptop online. in the past, cable connections have been easy, and wireless has given issues, but this time its the opposite. so, i have a new cable connection that is all plugged in. called customer support, they have no support for linux as usual, but they 'manually activated' the modem and thats all they can do. i am not trying to setup the wireless network yet, i'll do that with a pc later, for now i just want to plug in and go. on Network Settings, i have set the wired connection to dhcp. thats what i've done before ... not sure if i need to get static addresses from the ISP? i can go online now using the erratic but generous neighborhood free wireless.

ifconfig -a gives:

Code:

ath0 Link encap:Ethernet HWaddr 00:14:A4:1E:3E:65
inet addr:192.168.1.66 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::214:a4ff:fe1e:3e65/64 Scope:Link

[code]....

View 3 Replies View Related

Ubuntu Networking :: No Ethernet Connection After Restart From Hibernation

May 7, 2010

Following upgrading my 09.04 partition to 09.10 then 10.04, all was working fine until I tried hibernate out for the first time - big mistake! If I can get to a position where i can log on to the system, I find that my ethernet network connection is disabled and I cannot get it to restart. My 09.10 system still works ok. I am tempted to do a clean install of 10.04, even though I'll have to spend some time reloading the extra's and re-configuring.

View 1 Replies View Related

Ubuntu Networking :: No Ethernet Connection Recognized - No Such Device

Jun 17, 2010

I just installed 10.04 on my new netbook and I am suprised to see that the ethernet is not recognized. When I run

Code:

ifconfig eth0

the result is

Code:

no such device

The machine was working fine before I installed Ubuntu. I am suprised to see this problem as I have already installed it on a few machines without any problem such as this.

View 2 Replies View Related

Ubuntu Networking :: Can't Get Wired Ethernet Connection To Work

Jul 24, 2010

I have a HP Mini running Ubuntu Desktop 10.04, and I cannot get a wired connection to work. My network card is "Broadcom Corporation BCM4312 802.11b/g (rev 01)", and I have the restricted drivers for the card installed. Wireless works fine, though.

My /etc/network/interfaces:

View 4 Replies View Related

Ubuntu Networking :: No Connection With 75ft Ethernet Cable?

Sep 21, 2010

I am trying to run a cable from my wireless router over a 75ft cat6 cable to my bedroom. I don't get any connection on my end and I don't have any other ideas. I did setup a m0n0wall box just to try. I got the network led on my server to light up in my room but nothing more than that. Lastly, I tried adding a 5 port switch in my room and then connecting that to my server and nada.

View 4 Replies View Related

Ubuntu Networking :: Looking To Share Internet Connection Through Ethernet

Aug 5, 2011

After some fiddling around, I have come to the conclusion my current wifi access point hates my other computer's Broadcom chip or the drivers thereof. So, my current idea is as follows. I would like to use my netbook to connect to the wireless network, and then connect my other computer to it through ethernet. My netbook is dual boot XP and Ubuntu (think Ubuntu is a version behind) and I would be fine to set up this sharing in either and just leave it on as a repeater station. My other computer is dual boot XP and Fedora and I would prefer this work to allow me to have network in both. I have a straight-through cable and have verified that my network card supports the automatic crossing over behavior.

View 1 Replies View Related

Networking :: Configure Ethernet Connection Between 2 Fedora 12 Pcs?

Mar 5, 2010

I want to connect my pc to my laptop. I have fedora 12 installed in both system.How can I do this?

View 14 Replies View Related

Networking :: Testing The Ethernet Connection Continuously?

Nov 2, 2009

My program is working. However, I would like to add in some features. Let see my code first

Code:

if (returnresult<=0)
{
printf("Connecting....
");

[code]....

When the ethernet network connected, it will go into the else loop at line no. 13. The system will send status and display the status at control panel screen. If at this point, the ethernet disconnected, it will go back to the if loop at line 1. The system will keep trying to connect to the network and keep loop the if loop until it is connected.

Question now is I need the system to test the connection too after going into the operation loop that is start from the line no. 47. If the system went into the for (int c=0;c<cCOL;c++), it will need to do all the operations as indicated by cCOL times before it exit that loop and go into the previous loop.

I need the system to detect connection everytime an operation is going to happen or ended and if there is no connection, it will trying to connect. Before it is connected, it will not continue the operations. I tried to put the function "Connect (szPort, szAddress)" into each loop. Yes, the operation stop everytime the network disconnected. However, it shows on control panel screen "New Connection...." everytime it execute the statement. In fact, the network never disconnected.

I tried to look at the Connect function code, it is as below, I cannot figure out any statement that can stop the appearance of that "New Connection...". It may be hidden at the library source code, it is too hard for a beginner to modify the library code.

Code:

int Connect (char *szPort, char *szAddress)
{
/* Set the remote port */
int port; /* port number */

[code]....

View 1 Replies View Related

Networking :: Mint 10 Ethernet Connection Gone Broadcom?

Mar 6, 2011

OS: Linux Mint 10 | Windows 7 Install Type: WUBI inside windows 7 Computer: HP Compaq Presario CQ56' Network: Realtek PCIe FE Family controller w/ Realtek 8102E chipset Problem in: Network Connection Issue: After I woke up my computer from Sleep, I lost ethernet. No connection. It told me that I had lost my connection. Why? Now, after several restarts, nothing.

View 14 Replies View Related

Networking :: Serial Connection Over Ethernet With C-Kermit?

Jul 30, 2009

I have a Sun server that could be only configured via serial interface. It has one serial port with a RJ 45 connector. Although my laptop has not serial interface. Is there a way to use C-Kermit or any software to establish a serial connection via the ethernet port. It should be some kind of virtual serial port that should transmit the information over the ethernet port, without encapsulating it in ethernet frames.

View 11 Replies View Related

Networking :: Tap The Phone Line To Run Ethernet Connection?

Jun 15, 2010

it is possible to tap off your phone lines with ethernet connectors. As an example. I take a phone jack in the bedroom, I splice off the line of the phone and insert an RJ45 connector along with the phone connector. Hopefully the line will be 4 wire. I can't imagine it would work with only 2 wire. I don't know for sure. Would that work?

My thoughts are the problems with the entire phone line connections. I know the phone line runs out of the house. Would it not work because of that when I attach a switch to it? If anyone has accomplished this or tried to, I would like to know. I'm guessing that the house would have to be pre-wired with CAT-5 because of collisions that can occur.

View 3 Replies View Related

CentOS 5 Networking :: No Ethernet Connection On Thinkpad X40?

Nov 23, 2010

I'm trying to connect my newly installed CentOs 5.5 to the network. But although there is a cable connection that has worked well before with other distributions, the network configuration keeps telling me:"Determining IP information for eth0... failed; no link present. Check cable?"Here are the results of the /.getinfo network script:This is a university network that is working well for thousands of students, so the problem is not on the side of the network or the DHCP server.The wireless card is also not shown in the network configuration.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved