Ubuntu Installation :: Grub - Ran An Update And On Reboot Get A Kernel Panic Error
Mar 24, 2011
I have a new acer machine which runs fine on 10.10 mythbuntu desktop livecd. Install seemed fine.
Then I ran an update and on reboot I get a kernel panic error. Research on this reveals it as a very deep subject which can consume many hours, so I opted to reinstall.
This time with ubuntu 10.10. I've tried different CDs, liveusb. Same errors.
So, the question is this - where do I concentrate my efforts - somewhere ubuntu doesn't like this machine, or grub. Does a reinstall overwrite the grub install too? Or do I have a bogus grub install I need to purge before I will get anywhere.
View 5 Replies
ADVERTISEMENT
Sep 13, 2010
After reading this article openSUSE News - Forum Users Benefit from openSUSE KDE Repository I added that KDE repo to yast and switched all packages.
After rebooting it says (failsafe kernel configuration says the same):
Kernel panic - not syncing: VFS:
Unable to mount root fs on unknown block (0,0)
And stops at this string: "[<c0203826>] kernel_thread_helper+0x6/0x10" and capslock light is blinking.
View 8 Replies
View Related
Apr 15, 2010
I tried to upgrade Empathy from 2.28 to 2.30 via Synaptic but the upgrade always failed as there were some errors to do with the dependencies (libglib2.0* and others). The dependency issues were odd as it told me that Empathy wanted to install files that were older than the existing ones. So I decided to uninstall Empathy and all its dependencies, and re-install the whole (updated) package and it's dependencies from scratch via Synaptic. After the install, Ubuntu told me that there were broken packages and Update Manager kept on popping up asking me to run a partial upgrade to fix these broken packages. Well, the partial upgrade also failed (due to the same dependency issues , I suspect) so I decided that I'll run a full system update (as Update Manager had being bugging me prior to my failed Empathy upgrade). 486 Mb later, Ubuntu no longer wants to boot - it freezes on the splash screen.
When I start it in recovery mode, it spews out the various processes being loaded. Trying to run earlier kernels (2.6.31-19 / 17 / 14) from GRUB, in both normal mode and recovery mode does not seem to help.I am running Ubuntu 9.10, kernel 2.6.31-20-generic.
a) Is the problem to do with the kernel - did the update try to update the kernel as I note that there is a new stable release (2.6.33-2)? However, GRUB still indicates that the kernel is 2.6.31-20.
b) Would updating the kernel to 2.6.33-2 help? If so, how do I do this?
c) Is the problem, as I suspect, to do with the libglib* files? If so, how do I fix it?
View 2 Replies
View Related
Sep 9, 2010
I have a system here that tends to have kernel panics during an linux installation, though I was able to perform a vista installation on the same hardware. Now I would like to ask what your suggestion for the cause of that problem is. Here a screenshot: [URL]
I suspect the hd to cause it:
-it is now over 7 years old
-smartctl displays over 16k read error and 0.5mio seek errors
(or are such high numbers normalfor that old disks?)
-the panic contains the string bad_area in the trace
But it might also be a RAM error, since the trace contains sth about page_fault and vista installs on the very same hdd and does not report any error messages (concerning the hardware, and I heard win doesn't complain about a bad RAM).
View 1 Replies
View Related
Aug 31, 2010
Kernel Panic.
I am using
"HP Pavilion dvb 111x"
"AMD Turion X2"
"ATI RADEON Graphic Card"
And "RHEL5"
I am not register user of Redhat. I am trying to switch kernel form linux-2.6.18.X To linux-2.6.27.53. I had download source of kernel and install it as per README file. During installation everything was fair but as I am trying to boot from my new kernel it shows me "Kernel Panic" error. It Displays
" ide_generic :I/O resorce 0x1F0-0x1F7 not free.
ide_generic :I/O resorce 0x170-0x177 not free.
Redhat nash version 5.1.19.6 starting.
mount : Could not find filesystem. '/dev/root'
setuproot : mounting /dev failed : no such file or directory
setuproot : mounting /proc failed : no such file or directory
setuproot : mounting /sys failed : no such file or directory
switchroot : mount failed : no such file or directory
Kernel Panic not Synching:
attempt to kill init! "
View 14 Replies
View Related
May 20, 2010
I attempted to upgrade a Slackware 13.0 fresh install to current. First I updated 13.0 by running:
Code:
slackpkg update
slackpkg upgrade-all
I then amended the mirror to current and ran the following commands
Code:
slackpkg update
slackpkg upgrade-all
[Code]...
View 9 Replies
View Related
Jul 8, 2010
I recently decided to venture into the world of Linux/GNU by installing Ubuntu.
Before installing, I had a 190gb partition for windows 7 and 45gb of unallocated space. Through Wubi, I used the advanced partition editor to make a 6gb swap partition and a 22gb root partition for Ubuntu. All went well, but when I rebooted, I was unable to choose linux.
I installed Ubuntu by using Unetbootin to put the Ubuntu ISO on my USB drive. After installing, I disconnected the USB drive, and I was unable to choose the linux kernel option on the GRUB menu. When I do, my system just restarts and presents me with the GRUB menu again. However, windows 7 boots up perfectly.
I'm assuming that GRUB is somehow trying to boot the linux kernel from the USB. How do I change it to boot from the installation I made on my harddrive?
View 9 Replies
View Related
Jan 29, 2010
I got a notification that there was an upgrade available today in ubuntu 9.10 64, after the update i restarted my system and while booting i encountered this error message:
Kernel panic - not syncing : VFS : Unable to mount root fs on unknown - block (8,17)
does this have something to do with the OS looking at the wrong hd?
theres no command prompt to actually do anything and i tried booting in safe mode and had the same problem. Let me know what i can do!
View 3 Replies
View Related
Jun 8, 2011
Today I was upgrading my netbook with Ubuntu 10.10 on it to 11.04 via the Update Manager. I got a few errors and the Update Manager seemed like it wasn't continuing, so decided to exit it. It didn't respond so after a while I decided to restart the netbook. However the on/off/standby/restart, etc. button in the top right wasn't responding either, so I decided to force a shutdown with the power button on my netbook. Now Ubuntu doesn't start up, and gives me an error along the lines of:
Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.35-28-generic #50-Ubuntu Now could I in some way repair my Ubuntu installation while still keeping the files I already have on my computer? Maybe via booting from a flash drive or something...?
View 3 Replies
View Related
Jun 10, 2009
I am trying to install Fedora 11 from the full DVD iso on a system using an Intel D945GNT motherboard with a dual-core 3.2GHz Pentium D installed. The installation hangs quite quickly and produces the error "Kernel panic - not syncing"... The previous line is something along the lines of "EIP: [something] intel_i915_configure() [something else]". I have tried many different kernel boot options, such as acpi=off, nolapic, nommconf, and the like, but to no avail. It seems as though this has something to do with a memory mapping conflict due to the allocation of video memory for the on-board graphics chip, but I'm not at all certain about that.
View 3 Replies
View Related
Sep 14, 2015
I have had a serious problem with my laptop recently. I have been having unexpected reboots and kernel panics and I don't know why. I can't tell if it is hardware or software, and what is causing it.
It has happened on multiple power bricks from different outlets and locations, my slice battery and my main 9-cell battery.
I am running Debian Testing/Stretch with Kernel 4.1 with XFCE4 on a Lenovo T420 with 16 gb of ram, a i5-2540m, USB3 Express Card, OCZ SSD, an intel 7260 ac wifi card and Ericcson F5521GW 3g card. I also have a modded bios for the wireless cards, and I have had that for over half a year without any problems.
I have no clue what the cause is from the logs.
I also booted into Windows for a bit, then it blue screened, but I don't know if it was because of a driver I had tried to put on earlier for the 3g card, because Linux was out of commission and I needed 3g. The driver didn't work, gave a code 10 or something and gave me a blue screen that said something along the lines of device driver attempting to corrupt the system has been caught. Windows also won't boot anymore.
I'm not worried about Windows though, and what I really need is Linux to work, being that this was the first time I booted up into windows in several months.
Memtest runs fine, and passes all tests.
Right when I turned on my computer after one incident, I wrote a script to check the CPU temp and write it to a file every second. Once the computer turned off, I read the file and it said the CPU was at 39 degrees. Not something to turn off over.
I cannot find any indication of a problem in /var/log/kern.log. kern.log was extracted from the computer right after it rebooted randomly. Find it here: [URL] ...
View 7 Replies
View Related
Jul 8, 2010
After having my usb wifi adapters working fine for some time, they stopped working and I can not get network connectivity.
Some one else was using my box and they reported seeing a kernel panic and then rebooted the box. Now there is no connectivity through the wifi interfaces.
I have seen the kernel panics related to this driver before, but usually a reboot has no ill effect.
Code:
root@Algalon:~# iwconfig wlan0
wlan0 RTxx70 Wireless ESSID:"a800" Nickname:"RT3070STA"
Mode:Managed Frequency=2.412 GHz Access Point: 00:0B:86:9A:08:80
Bit Rate=54 Mb/s
[Code].....
View 3 Replies
View Related
Dec 31, 2008
I have the following strange thing with a RHEL4 installation. Since last week, the system did a reboot and now something is really fucked up. During boot we get the following messages (don't care about 'strange' typo's, my colleague typed it 'blind' from the screen)
Code:
The strange thing is that we never see a 'could not mount blabla' or similar messages. First we thought it was a failing kernel update by plesk, but even after manually updating the kernel with RHN RPM's, still the same message. Booting with rescue mode and then chroot the system works. After that we even can start things like plesk and so on.
We double checked things with another RHEL4 install, and at least two things were odd:
1: the working machine has /dev/dm-0 and /dev/dm-1, the broken one doesn't
2: some files on /dev didn't have group root, but 252
We tried to recreate the /dev/dm-X nodes with [vgmknodes -v], output:
Code:
A fdisk /dev/sda shows: /dev/sda2 XX XXX XXXXX Linux LVM (I removed the numbers because this line is from another machine, but rest was identical)
We have a copy of the boot partition so if one need more info please let me know.
grub.conf:
Code:
last part of init extracted from initrd-2.6.9-78.0.8.ELsmp.img:
Code:
View 3 Replies
View Related
Mar 26, 2010
i study computational systems engineering.. and in my school (itlp) we've got fedora 12 installed in some of the computers.. and we use it to learn network administration and security. the reason of this message.. is that i want to install fedora 12 in my notebook (dv4-1525la vu068la).. but an error keeps poping up.. the error is the next one..
DMAR: No ATSR found
DRDH: handling fault status reg f0003d63
Kernel panic - not syncing: DMAR hardware is malfunctioning
and though i have looked in bugzilla.. there is no help for me there.. they say.. "press tab in the welcome bootscreen when you are about to select whether to install or restore an existing system and write intel_iommu=off and press enter" but that does not really helps.. it just does the same.. in some blogs they say "upgrade your bios".. but i say.. then why i can not install the olders distributions with my "old" bios.
View 1 Replies
View Related
Nov 26, 2010
I updated wubi kernel(ubuntu 10.04) After restart, i selected ubuntu then my system reboots. Then i select ubuntu then my system reboots. I dont know what to do now,
View 4 Replies
View Related
Aug 8, 2010
Installed 10.04 on my daughters laptop from within windows Vista. All went OK but I had two boot loaders, i.e. turn on laptop and I would get the Windows loader asking if I want to boot in to windows or Ubuntu. Upon selecting ubuntu I would get the standard grub loader that I have on my PC. Did an update a few mins ago and it asked me to update grub which I did and as there was only one disk showing clicked forward. Now on reboot I have grub rescue prompt, no such device. Hard drive is a single 80 gig drive with windows on one partition and ubuntu in another. Have the live cd so can boot from that I guess. What do I do next?
View 9 Replies
View Related
Feb 13, 2011
Dell laptop booting from a USB stick with a CentOS 5.5 minimum installation.
Uncompressing Linux...OK, booting the kernel.
Red Hat nash version 4.2.1.13 starting
sda: assuming drive cache: write through
sda: assuming drive cache: write through
mount: error 6 mounting ext3
mount: error 2 mounting none
switchroot: mount failed: 22
umount /initrd-dev failed: 2
Kernel panic - no syncing: Attempted to kill init!
1. Does minimum installation not drop on a kernel or initrd with ext3 support? I can't imagine that's true, but have to ask.
2. The USB stick is single partition ext3. Maybe there is some limitation specifically related to USB stick booting that requires boot to be FAT16 or FAT32? Except the CentOS 5.5 installer refuses to let me install on either FAT.
3. How can I do the equivalent of lsmod on a linux installation that will not boot? i.e. I have CentOS x86_64 running in VirtualBox, I can plug the USB stick in there, so how do I get information on the USB stick's kernel and initrd if I can't boot from it?
4. Is it possible to rebuild the i386 based initrd on this USB stick, when the computer is not booted from that stick, with a system that's x86_64 based?
System Info:
Dell Latitude i686 Laptop which has run CentOS 5.5 and Fedora 12,13,14 in the past, and boots from Fedora 14 Live CD transferred to a USB stick. So I know USB booting is possible on this machine, and this stick.
The process of creating the stick:
CentOS 5.5 i386 on a USB stick. Old Dell i686 laptop which has previously run CentOS 5.5 installed from DVD, and has successfully booted from this same USB stick holding transferred Fedora 12,13,14 Live CDs. CentOS 5.5 was installed onto the USB drive directly by the CentOS 5.5 DVD installer (running virtualized in VirtualBox 4.02 on Mac OS X 10.6.5.). No errors or complaints during installation.
For whatever reason, the installer did not do some things correctly. First Grub wasn't working correctly, I got that sorted out and have the Grub+CentOS splash screen, it finds vmlinuz and the initrd, and then I get a kernel panic.
Ext3 was built into the kernel and that's why I'm getting this message. I do not know how the installer would have dropped a kernel or initrd during instalation that that don't contain such a basic thing that obviously comes in linux kernel 2.6.18-89 EL.
View 3 Replies
View Related
Jan 4, 2010
Over the past few days I have been trying to install an older kernel (kernel 2.6.28.1) on ubuntu 9.10 64-bit WUBI installation. I compiled, installed, and updated my grub for the kernel. When I reboot, the grub menu correctly gives me the option of booting into the older kernel but when I do so I receive the following error message:
error: you need to load the linux kernel first.
I am at a complete loss on how to fix this. I even downgraded grub but I still get the same error.
View 2 Replies
View Related
Nov 30, 2010
After installing the latest updates (dont know which ones) yesterday, I get a kernel panic (LED lights flashing at the keyboard and black screen) when starting X (the login manager). I am running on 64 bit with the proprietary ATI catalyst driver. How can I start in text only mode?
View 5 Replies
View Related
May 15, 2010
I rebooted, and got a new GRUB error:
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 7b4afbe0-28fe-4403-bd86-c4364bf10f98
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=7b4afbe0-28fe-4403-bd86-c4364bf10f98 ro single
initrd /boot/initrd.img-2.6.31-16-generic
View 8 Replies
View Related
Sep 23, 2010
Yesterday i was prompted by my update manager to update some packages. I really don't remember which but i updated.
After reboot the box now kernel panics. I don't believe i get a ubuntu splash screen, and at this point i can't figure out how to get to my grub, in case a kernel was upgraded and it's possible to boot to different kernel.
i noticed some words like 'mantis', 'oops' and 'dvb_core' was a part of the text i get on the screen.
Can this be because of a dvb* upgrade that breaks something important ?
If needed, i should be able to boot via liveCD, or i could take a picture of the errors.
View 9 Replies
View Related
Dec 16, 2009
Update manager downloaded and installed latest kernel (Ubuntu, Linux 2.6.31 -16 -generic). When I tried to restart I get the message { 1.661235}Kernel panic - not syncing: VFS: unable to mount root fs on unknown - block(8,38). Everything works fine on previous update.
View 1 Replies
View Related
Jan 29, 2010
I updated my slackware 13 to current with the commands as writes in man slackpkg:
slackpkg update
slackpkg install-new
slackpkg upgrade-all
but now it's print kernel panic and I can't restore it.I tryed to boot with root=/dev/sda3 parametre, but not effect. Do you have ideas?
View 14 Replies
View Related
Jul 16, 2010
today I updated my Slackware 13.0 to 13.1. Unfortunately it didn't boot any longer. I probably forgot to run "lilo" before restarting. However, I reinstalled Slackware and I installed grub instead of lilo I'm more familiar with it..
This was my first menu.lst config:
Quote:
title Linux (uuid)
root(hd0,0)
kernel /vmlinuz root=UUID=6a8096a3-3915-4ef2-8984-976e42d04cfc ro vga=0x031b
While booting it stopped and printed this message:
Quote:
Kernel panic - not syncing: VFS; Unable to mount root fs on unknown-block
Then I compared it to other Linux system on different computers and I noticed that every of them, who are using uuids, using an initrd as well. So I created one and now it boots properly.
I just wonder, why? Why does it need an initrd to boot by using uuids?
View 2 Replies
View Related
May 15, 2011
After upgrading Maverick (perfect!) to Natty, I was unable to boot into anything. (kernel 2.6.38). However, through much PITA, I was able to boot into an older kernel. (2.6.35). I completely removed 2.6.38, rebooted, reinstalled it and ran update-grub. However, 2.6.38 is no longer available no matter how many times I run update-grub, and the only option left is 2.6.35. In my humble opinion, the Natty upgrade experience is rubbish. (blank screen, total PC hangs, boots into a blank screen with only a blinking cursor, NVIDIA official driver not working, bootable only into older kernels etc.)
View 7 Replies
View Related
Jan 7, 2010
This has to be the sixth time I am going to have to reinstall Ubuntu (Can't get enough of that Linux greatness) in the past 6 months. I just don't understand what exactly is wrong, I don't install anything extra (but the ubuntu restricted extras) yet updates that ask me to reboot will take me to a GRUB command line screen and trying to boot through the command line interface gives me an, "Invalid Magic Number", error.
There should be an official tool for when problems like this come up, so that users like me can easily move their files off their HDD before reinstalling. I didn't come here to rant but, does anyone know what may be causing this everytime, how it can be avoided maybe even how to deal with the Magic Number error and boot in (I wouldn't mind typing in the commands every time BTW)?
My system
Hp Compaq 6730s
2.0Ghz 575 Celeron
4GB RAM
Intel X4500MHD
Broadcom 802.11b/g
View 2 Replies
View Related
Sep 1, 2011
(after i update packages, it says error, and here's whats in the details tab)
Preconfiguring packages ...
(Reading database ... 197969 files and directories currently installed.)
Preparing to replace flashplugin-installer 10.3.181.34ubuntu0.11.04.1 (using .../flashplugin-installer_10.3.181.34ubuntu0.11.04.1_i386.deb) ...
code....
How to fix This? i haven't messed with Ubuntu much...Why am i getting an error about a kernel update?
View 4 Replies
View Related
Oct 30, 2010
I have upgraded from 10.4 to 10.10, and when I restart I get the error "kernel panic - not syncing: VFS: unable to mount root fs on unknown block".I've done some googling and found this is a pretty common problem, but no existing solutions have worked for me.Right now I am using the 10.4 live CD.
View 5 Replies
View Related
Sep 6, 2010
I did the kernel update via Update Manager today. Unfortunately , after this , disaster happened whereby sh.grub> prompt appeared on screen.
I got no idea how to rescue or repair the grub. I installed Ubuntu 9.10 in my E: under Windows 7 partition and labeled as "ubuntu". It has dual boot capability.
View 6 Replies
View Related
Oct 12, 2010
I started installing the beta of Maverick a few days ago, but the update server was running inordinately slow, so I canceled it. Several times, I have attempted to continue the installation, but I've been unable to reach the server. Shortly after this happened, I could no longer boot normally--I get the error:
Code: Kernel Panic - not syncing:VFS:Unable to mount root fs on unknown-block(0,0) Choosing the previous kernel fixes the problem.
So, I obviously want to upgrade to the release version now. When I open the update manager, I get asked if I want to do a partial upgrade to complete the install. I'm a bit leery of doing this since I only have one previous kernel to go back to (my list got really long and I have another operating system entry underneath, so I set my automagic boot manager to only keep two), and if I can no longer boot after the upgrade, I'll have to use Windows until it gets fixed... So, should I finish the upgrade, try to troubleshoot the error, or do something else to jump right to the latest release, after being partway through the upgrade?
View 3 Replies
View Related
