Ubuntu :: Nautilus Not Working On1 0.04 64bit?
Aug 1, 2010
Suddenly nautilus stopped working on my Ubuntu 10.04 64bit. I can't left/right click on the desktop nor open any folder from the 'Places' menu. When I try running nautilus from the terminal here's what I get:
Code:
(nautilus:1574): GLib-GObject-CRITICAL **: /build/buildd/glib2.0-2.24.1/gobject/gtype.c:2706: You forgot to call g_type_init()[code]....
Also, I've tried creating a new user but the problem remains.I really don't want to reinstall.
View 2 Replies
ADVERTISEMENT
Jul 25, 2011
I had an Ubuntu Server 32 bit installation and everything was working fine. Now that I installed Ubuntu Server 64bit on a new drive in the same machine, the ethernet card is not working!! This is insane cause when I put the hard disk with the 32bit installation back and booting from it, the ethernet card is working without any problems but in the 64bits installation it is not shown at all using "ifconfig -a"
lspci output:
Quote:
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
How can I check which module is being loaded in the 32bits installation to try to load it manually in the 64 bits installation?
View 3 Replies
View Related
Aug 23, 2010
I got a call from a friend who did the distrubution upgrade from 9.04 to 9.10 and all was well for about 2 weeks and then his desktop icons disappeared. He kept running it that way and never looked for help until a couple of days ago he tried to plug in a card reader to get some pictures from his camera and nothing happened. that was when he discovered that he couldn't run Nautilus at all. I had him purge nautilus and reinstall it but then he couldn't even log in to Ubuntu. Very strange indeed. Anyone else experience this? After going over all the settings and finding them what they should be, I just installed 10.04 and all is well except that he lost a few photos.
View 3 Replies
View Related
May 1, 2011
I have just installed Gnome 3 on my Ubuntu 11.04, and I noticed that nautilus is not generating any new thumbnails. All the old thumbnails are till showing, but if i get a new movie or rename an old one, it does not even attempt to create a new one. Totem is able to play all the movies without any problem. Ive also tried installing totem-xine, but it still makes no difference.
View 5 Replies
View Related
Jun 6, 2011
Cannot access folders within a folder on a network drive with Nautilus in Natty. It just locks up. Thunar and Dolphin works fine in the same scenario.
View 1 Replies
View Related
Oct 17, 2010
I installed Nautilus Elementary + Gloobus in Maverick with:
Code:
sudo add-apt-repository ppa:gloobus-dev/gloobus-preview
sudo add-apt-repository ppa:am-monkeyd/nautilus-elementary-ppa
sudo apt-get update && sudo apt-get install gloobus-preview && sudo apt-get upgrade
nautilus -q
The built in terminal & gloobus preview work fine but pressing F4 for clutterview just shows a grey area at the top of the screen. After some searching I did this:
[Code]...
View 5 Replies
View Related
Oct 23, 2010
I installed it and press F4 and nothing happens.
View 9 Replies
View Related
Mar 5, 2011
i installed my ubuntu in a VM, unexpectedly it crashed down, when i tried to turn it on, my nautilus doesnt show theme icons and look and feel correctlyas you can see in this screenshot[URL]
View 2 Replies
View Related
May 10, 2011
I installed nautilus-open-terminal with Code:sudo apt-get install nautilus-open-terminal but "Open in Terminal" does not show up in the context menu.
View 1 Replies
View Related
Oct 10, 2010
I have been using Maverick since the release candidate was released. I also installed nautilus elementary (the latest version). The inbuilt terminal works great, but the clutterflow option in the view menu only brings up a blank black screen with the file name only [URL]. The terminal gives this:
** Message: action_show_hide_clutter_callback
** Message: nautilus_window_slot_show_clutter
fm_icon_get_clutter_widget
[code]....
I am using Ubuntu Netbook Edition on a Dell Inspiron mini 1012.
View 4 Replies
View Related
Jan 4, 2011
how to get firesheep working in ubuntu 10.04 64bit
View 3 Replies
View Related
Jan 3, 2010
I'm trying to write some nautilus scripts. I have a file (script) called fileType, on the scripts folder, that shows when i right click over a file, on the context menu, but it does nothing.
Code:
#!/bin/sh
for arg
do
filetype=$(file "$arg")
[Code]..
View 2 Replies
View Related
Sep 16, 2010
My system (ubuntu studio 9.10, 32bit) was working just great. Then I installed dropbox via synaptic -- and it worked just great.Then I got some very strange behavior in how my tabs (firefox) worked, and the windows on the system would no longer respond.I restarted.... and the behavior got worse.. my menu would not show up, and when I opened dropbox -- the windows would not move, their menu(s) did not work, and I could not close them.
I tried to:
-- reinstall gnome
-- reinstall nautilus
[code]....
View 1 Replies
View Related
Mar 26, 2010
I have a belkin n wireless net card its model # f5d8053 v3 tring to get this card to work. have done some looking around and some of the places where i have looked they said DID work but are no longer working...the os on the computer i am trying to install this on is a 64 bit ubuntu
View 2 Replies
View Related
Feb 3, 2010
i'm running Opensuse 11.2 with Gnome, and installed the "nautilus-image-converter" packages.
but it doesn't work on my system...
Is it the same thing for other GNome users ?
View 3 Replies
View Related
Nov 14, 2010
I try to use equinox revolution light them with nautilus elementary but I notice the context menu is not correct (right click menu). There should be a drop down shadow on the context menu but mine seem not having that. If I use with default nautilus, it was ok. Please see the screen shot attached. The context menu has no drop shadow and very difficult to notice it's window pop up from the background. I also attached another screenshot to show the drop shadow i am talking about.
View 3 Replies
View Related
Jun 10, 2011
I am using the distro in the title and version, and I can't get flash to work properly either in konquer, or in chromium. I have looked in the package manager and it says flash has been installed. I tried again to install it through the terminal, it downloads a bit, and then it says that is installed as well. I know chrome in particular is supposed to come with flash built in so this is frustrating. How do I install flash and get it working? Never had this problem before
View 4 Replies
View Related
May 20, 2011
Here is a segment from a script (the script is complicated so I'll just post the problem)
Code:
echo "sudo mount -o loop $eFile $eMount" > syntax.txt
sudo mount -o loop $eFile $eMount &> error.log
For debugging, I have the first line that echoes back the command being run (so I can find obvious syntax errors) and the second line runs the command.
The first line returns:
Code:
sudo mount -o loop /home/abigail.dunning/Training/1994-2010 Linux Journal Master Collection.iso /media/iso/1994-2010 Linux Journal Master Collection
If this line is cut and pasted into a bash shell it runs and the mount occurs fine.
However, this is being run in a nautilus script and the output of the same mount command is the syntax for mount?
Code:
# contents of error.log
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
[Code].....
View 8 Replies
View Related
Jul 19, 2011
I have installed the Java rpm for 64 bit. I have tried re installing it and it says its already installed but it doesn't not show up in my plugins on firefox. Then when I run something that requires Java it says java is required. I am very new to linux and I am not sure what to do
View 5 Replies
View Related
Mar 9, 2011
I recently got a hosted CentOS 5.5 box at a server farm to run a small ftp server for me.
They preloaded the image and installed a .86_64 build of 5.5, and I've only been familiar with i386.
I didn't think there'd be much of an issue from this, but I've gone thru all the normal steps to install and configure VSFTPD, however nothing is working.
I'm running CentOS release 5.5 (Final)
and I've gotten VSFTPD build 2.0.5 release 16.e15_5.1 installed from both yum and rpm (at separate times) and I've also tried grabbing the tar ball of 2.3.2 and 2.3.4, but run into dependency issues when compiling the code using GCC (it wasnt installed the first time).
i've started and made vsftpd persistent using service vsftpd start, chkconfig vsftpd on, and i restart the service after any changes to the conf file.
I'm trying to run the following settings. in /etc/vsftpd/vsftpd.conf
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
[Code].....
View 5 Replies
View Related
Aug 22, 2011
Is not working my microphone in Deban. In Ubuntu or MW7 all works correctly.
Here are some outputs of commands:
root@debian:/home/brok# uname -a
Linux debian 2.6.32-5-amd64 #1 SMP Tue Jun 14 09:42:28 UTC 2011 x86_64 GNU/Linux
root@debian:/home/brok# lsb_release -a
LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch
Distributor ID: Debian
[Code]....
View 7 Replies
View Related
Mar 19, 2009
so i installed the livna driver according to leigh123@linux and when i tried to "gedit /etc/X11/xorg.conf" as root i got
Quote:
No protocol specified
(gedit:5031): Gtk-WARNING **: cannot open display: :0.0
i was able to oped gedit when i wasnt root, so i changed the permissions of xorg.conf and added the extra
Quote:
ModulePath "/usr/lib64/xorg/modules/drivers"
to the existing Section "Files" then rebooted. when i run livna-config-display as root i get
Quote:
No protocol specified Cannot import GTK. Please try setting DISPLAY and try again
this didn't really make sense to me, so installed gtk+, not sure if that just added to my problems or not...
when i run system-config-display as root i get
Quote:
No protocol specified
Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 312, in <module>
hardware_state = XF86HardwareState(xconfig)
[Code].....
View 3 Replies
View Related
Aug 9, 2009
i want to put LISA working under my x86_64 but i receive a error because the fault of cpp wich i have in the /lib, so i don't understand that fault
checking for g++... no
checking for c++... no
checking for gpp... no
checking for aCC... no
[Code].....
View 5 Replies
View Related
Apr 23, 2010
I'm running Fedora 12 x86_64, Chromium 5.0.382.0, and flash-plugin-10.0.45.2-release.i386. I'm having a problem getting Flash to work. I noticed that when I do a "locate libflashplayer", I get numerous flavors of the .so file to choose from.
View 3 Replies
View Related
Feb 21, 2011
I've a problem booting on my fc14 64 bit. I install it yesterday and everything was ok. Then I updated it and I installed wireless drivers kmod-wl equivalent to my kernel version that is 2.6.35.6-45. I've a pavilion dv6 with a broadcom ach. for networking. So the next step was installing kmod-nvidia for my nvidia geforce but after rebooting my never allow me to log in! I can se the tipical blue-white progress bar loading nvidia drivers but not else!
my screen freeze itself after the progress bar became white. I would resolve by rescue mode but I've installed fc14 64 b using a usb-pen drive and I find no way to do this from live version.
View 6 Replies
View Related
Jun 7, 2011
My wife has Fedora 15 installed on her laptop because she wants to use Gnome-3. I installed Fedora 15 Beta-1 and enabled a few ?repositories? through rpmfusion because she needs Flash and Dropbox for her work. She kept it up to date with the default gui application (?gnome-packagekit?). Somehow, somewhere, something went wrong.
A while back she kept getting errors while trying to update ("another system is already using rpm" or something like that). Also the window theme changed to something resembling windows. And she lost the ability to put a window full screen by dragging it to the top op the screen or tiling it by dragging it to the left or right of the screen.
I managed to "repair" the system by disabling one rpmfusion ?repository? ("rpmfusion future" or something like that) by using the gui. From the terminal I was able to get yum upgrade working again by a yum remove of three packages that were conflicting or pinned. I also managed to restore the correct window theme with the gnome-tweak-tool.
However, I can't find any information on how to re-enable the dragging to fullscreen or tiling. Google is no help it just keeps turning up sites with people talking about the fact that gnome-3 has dragging to fullscreen (or whining about it).
View 1 Replies
View Related
Feb 5, 2010
This is a very new desktop system using an ASUS mainboard with built on sound. I've never had sound working properly and have re-installed many times. One sound will play (KDE4 desktop sound, Amarok audio, even games under WINE) but when a second sound plays, it stops the first one (and plays perfectly), but then the first app is no longer able to play sound. I tried to get Skype going today and have some very interesting results.
It works but on a test call my voice sounds like I'm going for the "Extortionist of the Year" award! Have a listen here if you feel like a quick laugh - [URL]. Great effect for issuing ransom demands, but not too useful when calling family. I recorded it via my camera so the quality is not fabulous, and the screeching noise is the from the birds in the background. Here is the requested information for diagnosing sound problems -
1. alsainfo.txt - [URL]
2. rpm -qa alsa
alsa-plugins-32bit-1.0.21-3.3.x86_64
alsa-utils-1.0.21-3.1.x86_64
alsa-plugins-1.0.21-3.3.x86_64
alsa-tools-gui-1.0.21-2.5.x86_64
alsa-1.0.21-3.2.x86_64
alsamixergui-0.9.0rc1-743.1.x86_64
alsa-oss-1.0.17-25.2.x86_64
alsa-oss-32bit-1.0.17-25.2.x86_64
alsa-tools-1.0.21-2.5.x86_64
alsa-firmware-1.0.20-3.2.noarch
3. rpm -qa pulse
libpulse0-0.9.19-2.3.x86_64
4. rpm -q
libasound2 - libasound2-1.0.21-3.2.x86_64
5. uname -a
Linux kevs-desktop 2.6.31.8-0.1-desktop #1 SMP PREEMPT 2009-12-15 23:55:40 +0100 x86_64 x86_64 x86_64 GNU/Linux
View 3 Replies
View Related
Jun 22, 2010
Adobe has discontinued the 64-bit linux version of flash-player. How can I get flash-player-32bit working in Chromium-64bit on Fedora 13 (x86_64)?
View 5 Replies
View Related
Mar 11, 2011
I have messed with things I shouldn't have so I am going to reinstall F14..Could someone please explain how to install the JDK from oracle and get the plugin working for firefox please?
View 14 Replies
View Related
Oct 11, 2010
I am a hobbyist interested in development and have recently decided to migrate from Windows to Linux and after trying out a number of distributions decided to use openSUSE. After getting somewhat more comfortable with Linux and openSUSE I decided to try and get comfortable with development on this platform.
And hence my problem: After compiling the simplest of programs (hello world) and trying to step through it with gdb I get this output:
Missing separate debuginfo for /lib64/ld-linux-x86-64.so.2
Try: zypper install -C "debuginfo(buildid)=2b25d8329d1aa713a2cc61b5cb701f6f89c78022"
Missing separate debuginfo for /lib64/libc.so.6
Try: zypper install -C "debuginfo(buildid)=9b674b2caef1982db55e436bca814060e1705b7f"
As soon as I type the command start in gdb. Naturally I tried the recommended zypper downloads to no avail. Furthermore I sought out the glibc debuginfo in the software manager and found nothing which I have not already installed.
On my system are:-devel-32bit
glibc
glibc-32bit
glibc-devel
glibc
glibc-info
glibc-locale
glibc-locale-32bit
glibc-profile
glibc-profile-32bit
gdb
gdbm
gdbm-32bit
All of these are the latest version from the standard 11.3 repositories. I believe these are all the requirements I should need to not have gdb give me errors but sadly that is not the case. Lastly I am running on a 64bit version of openSUSE 11.3.
View 4 Replies
View Related
