Debian :: Microphone Is Not Working In Squeeze 64bit?
Aug 22, 2011
Is not working my microphone in Deban. In Ubuntu or MW7 all works correctly.
Here are some outputs of commands:
root@debian:/home/brok# uname -a
Linux debian 2.6.32-5-amd64 #1 SMP Tue Jun 14 09:42:28 UTC 2011 x86_64 GNU/Linux
root@debian:/home/brok# lsb_release -a
LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch
Distributor ID: Debian
[Code]....
View 7 Replies
ADVERTISEMENT
Aug 10, 2011
since lamaresh is not being updated anymore and the wine packages from the official Debian repository are quite old there isn't really much choice for getting a recent version of wine anymore. Since I don't want to use the carbon project or the Mempis repository, as stated here, (at least yet) I have decided to build the package myself. Unfortunately I would like to have a 32bit version but am running a 64bit version of Debian Squeeze. When I run ./configure I get the following message at the end.
[Code]...
View 1 Replies
View Related
Apr 27, 2010
i recently buy an MSI 770-45 motherboard with 4gb (2x2gb) Gskill 1600Mhz Ram. The CPU is an athlon2 x4 620, everything tested and working fine except i can`t get lenny or squeeze 64bit linux running because of kernel panics when creating ext3/ext4 partitions during install or running fsck on the system i installed on another PC and moved to this one. The boot shows a screen related to IOMMU problem saying must enable it in bios but no option related to it and no memory remapping also. The question is how i can get IOEMMU working with 4gb of RAM (if i remove one of the two modules everything is fine). I`ve tryed ioemmu=memapper/off/noagp/soft and any thing i found on the web, moving to test debian installation was my last hope really before starting to use the 32bit one, i am planning to add more RAM which with this version is just can`t be.
View 3 Replies
View Related
Dec 17, 2010
I am trying to build the ATI fglrx 10.12 driver using the ATI installer on debian Squeeze 64bit.
Todo this I run the following command:
./ati-driver-installer-10-12-x86.x86_64.run --buildpkg Debian/testing
Which produces this output:
Created directory fglrx-install.oFbosX
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-8.801
Generating package: Debian/testing
cp: cannot stat `/home/nojan/Downloads/fglrx-install.oFbosX/x710_64a/*': No such file or directory
Package build failed!
Package build utility output: .....
dh_install: Compatibility levels before 5 are deprecated.
cp: cannot stat `./usr/X11R6/lib64/modules/linux': No such file or directory
dh_install: cp -a ./usr/X11R6/lib64/modules/linux debian/fglrx-driver/usr/lib/xorg/modules/ returned exit code 1
make: *** [binary] Error 2
dpkg-buildpackage: error: debian/rules binary gave error exit status 2
Removing temporary directory: fglrx-install.oFbosX
As you can see it fails during the build.
View 10 Replies
View Related
Jan 23, 2011
How to install Epson Perfection V350 photo on Debian squeeze 64bit?
When i start xsane the scanner do not exist
View 1 Replies
View Related
Jul 1, 2011
can't get my microphone to work. Here is the output for: dmesg | grep input
[code]...
View 1 Replies
View Related
Mar 13, 2011
running Debian Squeeze (standard 32bit squeeze Kernels linux-image-2.6.32-5-486 and linux-image-2.6.32-5-686) happily without trouble on a 64bit capable Samsung laptop featuring an Intel T3200 Dualcore processor. However, when I try to boot using the squeeze 64bit kernel (linux-image-2.6.32-5-amd64) the system proceeds through a few text lines immediately after Grub, and then performs a warm start.
The text output I get immediately after Grub look similar to the ones I get booting the 486 and 686 kernels, without any indication for the reboot behavior. The rebooting also seems to happen before any entry is written into the boot/system log files (logging is enabled). This behavior also occured when I first tried to prime the machine from the Debian squeeze install CD using the amd64 kernel. I'm generally happy with the 32bit kernels, but I'd like to use the amd64 support to do some Java compatibility testing for 64bit architectures.
The Laptop is a Samsung R510-Aura T3200 Delfina with the following Hardware and Setup (using Grub as boot loader):
- Intel Pentium Dual CPU T3200 @ 2.00GHz (see http://ark.intel.com/Product.aspx?id=37160 for details)
- NVIDIA GeForce 9200M GS
- 3GB RAM + 1GB reserved for GeForce
- Konfiguration Details:
-- Phoenix Bios
[Code]....
Maybe a strange BIOS-Setting that works with the 32bit kernels but not with the 64bit kernel? I've seen a post on here that indicates someone is running the amd64 kernel on a T3200 successfully, and the chip is definitely 64bit capable, so the reboot behavior is a complete mystery for me
View 2 Replies
View Related
Apr 18, 2011
I can not for the life of me get the microphone to work on my netbook. It is an ASUS Eee PC 1015PE. I have tried just about everything I can think of.
View 6 Replies
View Related
Feb 7, 2010
I have troubles with microphone on skype. It used to work ok and now I don know what i have changed. I can hear myself in earphones is I blow into mic. but if I try to record myself arecord -d 10 test.wav Here is may amixer output:
[Code].....
View 2 Replies
View Related
Mar 10, 2010
Today I spent more than an hour trying to get Skype set up on my Linux box (Debian testing), but I couldn't make my microphone to work correctly. So I hear the other person talking, but they can't hear me. I am running KDE 4.3 and Skype 2.1 Beta. What do I need to do to get it working?
View 2 Replies
View Related
Mar 9, 2011
If I recall correctly, my Squeeze desktop is working whereas my Squeeze laptop isn't.
Here are the errors: Failed to open a session for the virtual machine Ubuntu 10.04.2. The virtual machine 'Ubuntu 10.04.2' has terminated unexpectedly during startup with exit code 1.
Result Code:
NS_ERROR_FAILURE (0x80004005)
Component:
Machine
[Code]....
View 2 Replies
View Related
Feb 27, 2011
Why are applets not working on Squeeze? They were working in Lenny and work in Windows 7.
apt-cache policy openjdk-6-jdk icedtea6-plugin
openjdk-6-jdk:
Installed: 6b18-1.8.3-2
[code]...
View 10 Replies
View Related
Apr 10, 2011
How to get Java applet running on Squeeze, jre-6u26-linux, is needed to be installed, but I counld not do it, is there any alternative way to get Java applet working ? It works on Lenny, but I am moving to Squeeze.
View 2 Replies
View Related
Jul 6, 2010
I don't print much, but tonight needed to print and found that none of the printers were listed in Okular or Openoffice, then when I tried to open Cups Administration http://localhost:631/ I got the error message Connection to Server Refused
View 4 Replies
View Related
Feb 14, 2011
I am moving over to debian from ubuntu, and the latest install is to an acer aspire one netbook, the wireless card seems to be working and I can see available networks and even connect to mine (with WPA encryption) via the gnome network manager, however opening a browser or pinging both local and external machines all fail. its as if the OS does not not know to use the card. The wired works fine.
If memory serves the card is identified by lspci as Atheros AR5007.
There is no reference to wlan0 in etc/network/interfaces.
I do not have that system on now and have to leave for work, but I can post any further info from conf files etc as required when i get home tonight... Just thought I'd post a quick description in case I'm missing something obvious...
View 2 Replies
View Related
Jun 20, 2011
My audio is working, but when i put my usb speaker in it, it doesnt redirect sound to the speaker, just continues to play from the laptop.
In gnome, System->Prefernence->Sound shows the following:
Device: HDA ATI SB
Device: Logitech USB speaker (Alsa Mixer)
lsusb shows:
Bus 002 Device 003: ID 046d:0a04 Logitech, Inc. V20 portable speakers (USB powered)
dmesg shows:
[ 1530.060050] usb 2-1: new full speed USB device using ohci_hcd and address 3
[ 1530.229080] usb 2-1: New USB device found, idVendor=046d, idProduct=0a04
[Code]....
my usb speaker has volume control-up/down, mute, that seems to work, just no sound coming out of it. I am running Squeeze 6.01, kernel 2.6.32-5-686 Also I have 2 computers with squeeze 6.01 installed, both doesnt output usb sound, but the speaker works fine with winXp and ubuntu.
View 1 Replies
View Related
May 31, 2011
Howto get udevinfo command working on squeeze, which package should be installed?
View 6 Replies
View Related
May 13, 2010
I went to the Squeeze download page I am assuming that "ia64" is the Intel 64bit version. Am I correct?Are there any 64bit issues not encountered in the 32bit version? I am asking beforehand so that I am aware of the extra work I will have to do to make it work
View 14 Replies
View Related
Feb 9, 2011
I am trying to record using a microphone on a machine running Fedora 14. The microphone itself seems to work fine when plugged into a Windows laptop, and the Linux machine is able to play sound just fine. However, although I can record using the microphone (using arecord or audacity, for example), the recorded audio is super, super quiet. I have run alsamixer, and experimented with every capture source. Anything which had any effect (using arecord -vv to see the dynamic sound level) has been turned up to 100%. Still, recorded audio is barely audible.
I have run:
yum reinstall alsa-utils alsa-plugins-pulseaudio alsa-tools-firmware alsa-firmware alsa-lib
But that made no difference. I ran alsa-info, and the output is here: [URL]. Why my recorded sound is barely audible? My next step is probably going to be to boot to Ubuntu, just to see if it has the same problem.
View 2 Replies
View Related
Jan 22, 2011
After upgrading my Acer extenza 5620z to debian squeeze(kernel 2.6.32-bpo.5-686) left click was not working on my SynPS/2 Synaptics TouchPad,allthought moving the cursor was working !
I went to debian channel on irc and there was someone who told that I should install a patch [URL] to correct this problem but when I restarted the whole touchpad was not working !!
Here is the output of dmesg [URL]
View 14 Replies
View Related
May 11, 2011
How to get rnmod command working under squeeze?
[Code]...
# rnmod i915 bash: rnmod: command not found
View 2 Replies
View Related
Jul 23, 2011
This morning i installed Debian Squeeze and I'm sure it that was a good choice! I got my wireless stick to work (Linksys: Wusb600n v2), installed Chromium, VLC and some other stuff... and ye. I want to get Compiz working on my system! I'm not sure that my current drivers can deal with it, thought. I'm not good at Linux and I don't know what should I install (if there is something) so that I can have get better performance from my video-card. I made HardInfo report of my system. What are my options? How can I make the performance better and, maybe, run Compiz?
View 14 Replies
View Related
Sep 6, 2011
My setup is an HP OfficeJet 4315 All-in-one on a Debian box with the clients using XSANE on Windows boxes.
After upgrading to Squeeze, none of the clients could see the scanner.root could see the scanner from the Debian box.non-root users could not see the scanner from the Debian box.
Obviously, something was wrong with the permissions. After a lot of digging, I found that the /dev entry for the 4315 was owned by root.lp with no world write access.
My solution was to add the saned account to the lp group. I figured that was the most security-conscious way to fix it.
The remote clients can now see the scanner, so everyone is happy.
This may not work for every installation, but for all-in-ones, it probably will.
View 1 Replies
View Related
Apr 6, 2011
I have a Fujitsu Siemans Amilo A1630 installed with squeeze and am having problems making the headphone jack work with ALSA, there is no sound from this port and jack auto-detect does not work. All drivers are present and correct and necessary modules for my sound device appear to be loading properly, the device seems fully functional except for headphones.
View 6 Replies
View Related
Feb 1, 2010
I have debian with kde on a laptop with a built in ps/2 keyboard and touch pad mouse which have been working without problem since i bought the computer. However, recently i booted the computer up and all of a sudden the mouse and keyboard are not functioning. I know it is not a hardware problem because i can type in the BIOS password, make the selection between normal and recovery mode in grub, and can type in all of my passwords to unencrypt my hard drive.
Also, it recognizes the keyboard all the way up until the point where kde starts, at which point it loads a login screen with the mouse and cursor on the screen, but no ability to type, not even caps lock or ctrl+alt+f1 to switch to console mode. does anyone know why this is? I have performed not updates and have not changed the configuration of my computer so i am not sure why this would happen.
P.S.1 out 15 times when i load the part where i need to type in the passwords to unencrypt the hard drive the keyboard will stop working then instaed of with kde.
View 8 Replies
View Related
Jul 31, 2010
Here is my xorg.conf when I attempt to use fglrx:
Section "Device"
Identifier "ATI RADEON HD4850"
# Driver "ati"
Driver "fglrx"
EndSection
Also, doing /etc/init.d/start/ gdm3 says Starting GNOME display manager: gdm3 but it doesn't do anything. I tried pressing ctrl+f1 all the way to ctrl+f12 and nothing. What does work however is sudo gdm3 (with the "ati"/"radeon" driver --- nothing works at all with fglrx).
I am trying to get fglrx working because I want to fix this compiz issue I've been having here which could be related to the shortcomings of the "ati"/"radeon" driver: viewtopic.php?f=10&t=40991&p=312577#p312577
View 9 Replies
View Related
Jul 26, 2011
I purchased a ASUS USB-BT211 Bluetooth Dongle and I'l like to get it to working in Debian 6.0 Squeeze 64 bit.
uname -r gives....
I plugged in the USB Dongle:
lsusb gives....
lsusb -v -d 0cf3:3000 gives...
cannot read device status, Operation not permitted (1) larry@debian:~$
What do I need to do to get the Bluetooth Dongle Functional?
View 3 Replies
View Related
Jan 30, 2010
After a system update a couple of days back - which as far as I can remember included some xorg packages - neither of the policy files I have written for my keyboard, synaptics touchpad and mouse work.Below are the files and the Xorg log file.
99-x11-keyboard.fdi
<?xml version="1.0" encoding="UTF-8"?>
<deviceinfo version="0.2">
[code]...
View 4 Replies
View Related
Mar 13, 2010
I need help in getting Skype to work with Debian Squeeze.The problem is that there's no 64 bit version of Skype for Debian Squeeze and the other versions (Skype static and Skype Ubuntu 64 bit) makes Skype crash after login. Is it possible to get the 32bit version of Skype working with Debian Squeeze and how about other solutions?
View 12 Replies
View Related
Mar 11, 2011
when selecting a videos video using totem movie player 2.30.2 in stable, i get: an error occurred? gstreamer encountered a general supporting library error.
View 5 Replies
View Related
