Debian Multimedia :: Constant Crackling Sound After Upgraded To 8.1
Aug 31, 2015
I have upgraded (twice) to 8.1 and I get constant crackling sound - interestingly only from my left speaker. It starts already after the GRUB boot, and when logged in it just cracks all the time.
- in Wheezy there is no this kind of problem
- I have installed Jessie (crackling), fresh install back to Wheezy (no problem), fresh install again Jessie (problem), back to Wheezy (no problem), and now Jessie (again problem).
- the volume slide is jumping like crazy together with crackling. There is no chance to manually change it.
I have managed (by some unknown chance) to set profile to off, and now it disappeared. However, it comes back ON when rebooted.
View 5 Replies
ADVERTISEMENT
Nov 11, 2010
I recently upgraded from 9.04 to 9.10 (9.04 support just ran out). Ideally, I'd upgrade further to 10.04 or 10.10, but I am somewhat bandwidth limited, and so the additional 1.5GB upgrade to 10.04 is a last resort. After upgrading, I picked up a nice crackling sound. It seems to be tied to activity. Typing up this post resulted in a few crackling sounds a minute, but scrolling up or down, resizing windows, or doing anything more intensive (such as listening to music), and the frequency picks up.
lspci lists two audio devices: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)01:00.1 Audio device: ATI Technologies Inc HD48x0 audio Though I believe the second one is for a port on my video card, and thus the first one seems to be the one actually in use. If it matters at all, I'm running 64-bit, and am currently dual booting with Arch Linux (which has its own audio issues, and I was putting off tracking down because Ubuntu worked fine).
View 1 Replies
View Related
Aug 27, 2015
This is a weird and persistent bug that I've been having. It's persisted across multiple distros (Arch and Debian) and is currently making my computer only usable without sound. I'm beginning to think it's the hardware.
Anyway, the hardware is a Lenovo Yoga 2 Pro laptop. I'm currently running Debian 8. The crackling noise begins shortly after I log in - it happens regardless of whether the audio is muted, or whether anything is currently playing. It's a very, very loud noise - on the level of a vacuum cleaner or similar (maybe, these things are hard to estimate). It sounds sort of like a fast series of crackling pops. If I put the machine to sleep with the power button the crackling will go away for a little bit after I resume - I haven't timed it or anything but I imagine that it takes 30 seconds to start up again (after the computer has woken from sleep).
I can completely eliminate the problem by doing the following:
Code: Select allblacklist snd_hda_codec_hdmi
blacklist snd_hda_intel
blacklist soundcore
blacklist snd_hda_codec_realtek
blacklist snd_hda_codec_generic
[Code] ....
But obviously, this makes the sound on the laptop not work at all. I've been listening to music with my phone, which is an ok workaround, but I'm a programmer and I'd like to be able to watch talks on youtube and so on.
lspci:
Code: Select all00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:04.0 Signal processing controller: Intel Corporation Device 0a03 (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
[Code] ....
It started happening on Arch after a pretty standard install (i3wm with Xorg, browser, terminal emulator, etc) and I suspected that I had misconfigured something, so I installed Debian - I know other Debian users with this laptop who have not had this issue, and so I figured the default settings would treat me better. No such luck - it started happening again on the clean Debian install. One detail - both installs (the Arch install and the Debian one) use full disk encryption (lvm on LUKS) but I can't think of how that would affect it.
My only thought is that it's some weird power saving mode issue - the soundcard isn't used for a bit, so it cycles to a lower power state, and the bad thing happens.
View 4 Replies
View Related
Jan 22, 2015
I upgraded to Jessie today and found that I have no sound.
Code: Select all# uname -a
Linux ath 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) x86_64 GNU/Linux
There is no sound card on the motherboard. Sound worked previously through HDMI from a Nvidia GTX570
Code: Select all# lspci|grep Audio
09:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)
Code: Select all# aplay -l
aplay: device_list:268: no soundcards found...
[code]....
View 8 Replies
View Related
Jun 4, 2010
I recently upgraded to Ubuntu 10.04 from 9.10 and there's now a strange high-pitched crackling distortion sound whenever I play any kind of sound with any program, which seems to stop and start at random. My sound card is an SiS SI7012, and the sound was working perfectly before I upgraded.I'm not sure whether this is a problem with Pulseaudio or ALSA or what. I tried removing all of the Pulseaudio packages, but that didn't help, and I also tried doing 'remove completely' on all of the Pulseaudio and ALSA packages and then reinstalling, but that didn't work either
View 9 Replies
View Related
Dec 25, 2014
I just installed wheezy and upgraded to jessie. I had previously gotten sound working in wheezy by installing the flashplugin-nonfree and flashplugin-nonfree-extrasound packages, after configuring my headset in system settings. However, now I can't get sound to play in firefox. I've installed flashplugin-nonfree, flashplugin-nonfree-extrasound, and pulseaudio, still without luck. The volume is turned all the way up in alsamixer, sound tests play fine, and I can play music in VLC without any problems. This leads me to believe it's not a problem with drivers, but with some package I'm missing that will allow firefox to play sound. Sound wasn't working in the default video player either, before I installed the flash plugin. Is there something I'm missing?
Also, sound doesn't play on Konqueror either (KDE browser), which seems to indicate it's a problem with flash and not with firefox itself. After removing the flash plugin and installing pepperflashplugin-nonfree to ensure the pepper plugin was used instead of flash, sound still would not play in chromium, so I reinstalled the flash plugin and still don't have sound in any browser.
View 1 Replies
View Related
Apr 30, 2011
I've been trying to configure my revo R3700 over the last day and I'm finally there. HDMI sound is working apart from the fact that all sound is crackling. Sound is working through analogue without issue its just HDMI that is distorted
I initially did the command
aplay -Dplughw:1,7 /usr/share/sounds/alsa/Front_Center.wav
Which produced no crackling or distortion. I then tried a mp3 which was distorted and crackling, upon trying the same command as above later on, this too started to be distorted
Searched through the forum and theres a few people that have had this issue and have resolved it simply by edited alsamixer however this isn't working.
View 5 Replies
View Related
May 15, 2011
I've been through what I could find in searches here, but nothing fixed the problem so far.Here's the situation: I am using Ubuntu Natty 11.04, dual booting. So I know the sound is fine on the XP system, and also works crisp and clear on my Vista laptop sitting next to me. I've tried the sound through Banshee, Amarok and Exaile all with the same crackling as if the file was ripped off a bad CD. I'll repeat that I've tested the speakers, and also the jack port (being that there are two on my PC) so I am fairly certain it is an issue with Ubuntu. Here is the ALSA information report: http://www.alsa-project.org/db/?f=ad...8b8d1ee19905a5
It's not a problem with PCM- the crackling will go away if the level on PCM is like 30~ but then the sound is very quiet even with Master and speaker volume at 100, at which point you can still make out the crackling.
View 9 Replies
View Related
Sep 19, 2015
So whenever I start-up and after I enter my passphrase for cryptsetup (before login manager) I hear this crackling sound from my speakers constantly throughout usage.
While watching a movies or playing Youtube videos it's less noticeable, but when I'm typing up or working it really gets frustrating.
I've tried to figure out if pulseaudio was the culprit. uninstalled and rebooted yet crackling and pops continued. I haven't yet altered or messed around with ALSA or snd_hda_intel driver. But I did notice while using Audio Mixer, muting the speakers section stopped the crackling ...
So I guess the problem lies with Alsa or snd_hda_intel or both?
lspci -v
Code: Select all00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
Subsystem: Toshiba America Info Systems Device f91b
Flags: bus master, fast devsel, latency 0, IRQ 108
Memory at d0910000 (64-bit, non-prefetchable) [size=16K]
[Code]...
View 0 Replies
View Related
Apr 2, 2010
I installed debian lenny recently and everything working fine except the sound device.
My laptop specs are code...
View 10 Replies
View Related
Apr 13, 2010
It seems like it's mostly an issue with playing games. When I play certain 3D games, the audio may work for a little while, but will start getting scratching or full of static. Some times it's a lot, and other times it's just a little bit. Most times, the sound in the game will stop working after a short moment of static/scratchy sound. Then I am left with complete silence.I've seen on other posts that PCM volume may be turned up all the way. I wasn't sure what PCM was, but in the volume controls, I saw that you could adjust each individual application's volume. I assumed that this was PCM, as the game's volume was all the way up.I turned it down some, and I still got some static in the sound, and the sound still disappeared completely after a short time.
View 3 Replies
View Related
Jun 16, 2011
I recently installed Ubuntu Natty on my Toshiba Satellite A210-139. Everything works fine except the microphone. I can hear a crackling sound also when I record using Sound Recorder, but it's not too bad. The big issue is with skype, where, besides an annoying, loud white noise, the receiver hears me quite intermittently. I tried many things. Firstly, I played around with Alsamixer and Pulseaudio with every possible combination. Didn't work. I also tried what seemed to solve the problem to many users: replacing
Code:
load-module module-udev-detect
with
Code:
load-module module-udev-detect tsched=0
in /etc/pulse/default.pa
View 1 Replies
View Related
May 21, 2014
My microphone in skype is crackling on Debian Wheezy stable 7.5 ... It is OK on Windows so it is obviously not the hardware to blame.
I have tried already all the options I could find regarding this on the internet, by changing in /etc/pulse/daemon.conf:
Code: Select all resample-method = speex-float-10
OR
Code: Select all resample-method = speex-float-1
My output was also crackling but I solved it by changing:
in /etc/pulse/daemon.conf:
Code: Select all default-sample-rate = 48000
flat-volumes = no
in /etc/pulse/default.pa:
Code: Select allload-module module-udev-detect tsched=0
I also tried starting skype with
Code: Select all PULSE_LATENCY_MSEC=30 skype
Without any success. Now the output is perfect, but the microphone in skype (haven't tested it elsewhere) is crackling.
View 4 Replies
View Related
Aug 23, 2015
I'm having some issues with audio crackling/buzzing when turning up the volume, or on songs that have overclipped / overdriven parts, which doesn't happen on Windows (on it those sections are just "dampened"). Is there some certain settings in ALSA that are used to deal with this? Or is it something specific to the driver for the hardware? Speaking of which I'm using some integrated audio which goes by the name of Intel ICH7, and the chip itself is Analog Devices AD1981B.
I'm only using ALSA, without PulseAudio, and I've made sure the volumes both in the media players and under alsamixer aren't turned too high (PCM is at 47% and "Headphones" -- what is "Master" on Windows and on other soundcards under Linux -- is on 22%), so it isn't an issue with the software mixer being turned up too high. Also I'm using a pair of quality headphones (Sony MDRV55) so it's not an issue with the analog audio output either. I've also tried multiple other headphones and the result is the same.
View 4 Replies
View Related
Jul 8, 2010
Since upgrading from 9.10 to 10.04 sound now only works some of the time. One boot it will work perfectly and another boot it wont, the gnome sound mixer basically says that it can't detect a sound card.
I've compared lsmod when it does vs doesn't work and I've noticed...
Working:
Code:
Not working:
Code:
So it seems like the driver/module isn't detecting or initialising my card on some boots.
View 7 Replies
View Related
Jan 3, 2010
I upgraded to UBUNTU 9.10 and now my sound card is not working. The card is listed in the sound preferences Hardware but not in the input or output sections.
View 6 Replies
View Related
Nov 19, 2009
I've tried some workarounds like adding an audio entry in the registry but it did not work. I think that the problem is related with the pulseaudio driver...
View 3 Replies
View Related
Feb 13, 2010
I have a Creative Labs SB X-Fi sound card and I am getting a lot of crackling & popping with it. Plus I have to kill and restart pulseaudio a lot. Does anyone know of anything that can be done to help this out? I have the latest F12 kernel and rpms installed.
View 2 Replies
View Related
May 4, 2010
I have installed Skype beta 2.1 on my ubuntu 9.04, everything works except the mic. All I get is noise (SSSHHHHH) when i try to use it. moreover Looking in volume control, no matter what volume I have the mic set to initially, as soon as I initiate a call the mic volume goes all the way to zero (then initiating that crackling staticky bug) and turning it back up doesn't work as the volume slider just slides back down. and also one of the mic channels (left or right, I can't remember) comes to zero and slowly the other follows it.
View 1 Replies
View Related
Oct 10, 2010
I use a Creative Fata1ity USB Headset for playing games. I use a VOIP Client called Mangler for ventrilo. I play WoW via WINE.
I am not sure what is causing it, but the sound quality will be amazing and then randomly go to this crackling, static, ping, underwater sound for people in Mangler and for the WoW sound.
What I do is go system > preferences > sound and then turn the sound to off and then back to my setting and it is fixed. It will then come back randomly. It could be 5 minutes or an hour.
Anyone have any clue what this could be or how to narrow it down. Makes raiding kind of hard when I have to fix my sound randomly while healing a boss fight.
It did this on 10.04 and then on 10.10
View 2 Replies
View Related
Sep 14, 2009
When I installed fedora 11 I had bad sound which crackled and crashed. I followed this guide -http://forums.fedoraforum.org/showthread.php?t=225660 - which fixed my issues in videos playing on the web and in VLC. However; in the last few days sound has bugun crackling again in VLC while playing videos (web is fine). All updates have been applied and I am running 32 bit Fedora 11.
Also totem when playing video crashes, freezes, crackles etc while playing videos though playing sound files is fine with no issues. Any ideas how I might solve this and get my sound while playing videos back to how it used to be?
View 5 Replies
View Related
Apr 21, 2010
I've got some sort of problem with my sound configurations (I think). There's this crackling/disturbance (with an ocational beeping sound) coming from my headset whenever I insert a headset or speaker. Turning the sound off doesn't make it stop either.I'm running Ubuntu 9.10 on a Acer Veriton 3600GT (some years old). Please note that I'm not all that familiar with Linux yet...Typing aplay -l in Terminal returned the following:
**** List of PLAYBACK Hardware Devices ****
card 0: ICH5 [Intel ICH5], device 0: Intel ICH [Intel ICH5]
Subdevices: 1/1
[code]....
View 5 Replies
View Related
Jan 19, 2010
I've had a snap, crackle, pop coming from my speakers since I put this machine together, even now, with no reason for any sound to be coming from the speakers. Additionally, the crackling only becomes worse when I play ANY audio regardless of player or source, however the sound does just drop for a few seconds and then back and then off again when there is SUPPOSED to be audio. I understand not working at all, but "kinda" working is more confusing.
I'm running slack64 with the with an updated kernel from current, even though the rest of the machine is stock 13_64. The problem was the same with the original 2.6.29.6 kernel.
View 4 Replies
View Related
May 17, 2010
I just updated to kde 4.4 and I no longer have any panels (hade them before the upgrade) and right clicking the desktop produces nothing. I even lost the plasma du-hicki. how to create them. This was a test rig so no big deal but I need to get it resolved before I upgrade my other rigs. Using testing/unstable mix.
View 2 Replies
View Related
Dec 4, 2010
I am trying to solve, on my EEEPC 1001p running 10.10, the following problems:
(1)Sound is dead.It was working fine; but after a OS crash (see 3) it did not start to work once the reboot occurred;
(2)Mouse Touch Pad is dead.It was not working after the initial install.I read some threads about this and updated the BIOS on the EEEPC - then the mouse pad worked until a system crash (see 3) after which the mouse pad would not work any more.(The BIOS update corrected the screen brightness control).
(3)Fatal Crashes: the monitor screen goes black save for the mouse indicator.Nothing will take the system out of this state save for turning the power off and rebooting.
Error 3 will occur if I run compiz or not; if I keep my wireless mouse connected or not.
Error 3 did not occur when I told ubuntu to start a 'save-desktop' session.
I looked at the error logs but I am far from sufficiently knowledgeable to know exactly what I should be looking for; nonetheless I did not see anything in the error logs that had 'E' for error.Somewhere on some thread I read someone suggested that re-writing the XORG.conf file would be a prudent thing to do. I thought I would just now look at that file; so I terminaled: sudo gedit /etc/X11/xorg.conf.When the file opened all that was contained in the file was the number 1.That makes me suspect there is something wrong here for I remember looking at that file a long time ago when I had a problem with 8.04 and I believe it had a lot of information it it.
View 1 Replies
View Related
May 24, 2010
Previously (on Lenny) I would boot my computer and it would happily boot through to the Gnome login page (the pretty graphical one). Now (on Squeeze) I get the plain old text login prompt. So I login normally and try running "startx". It comes up with a black screen and a mouse pointer. Nothing else. Ctrl+shift commands seem to work so I am able to get to another terminal. When I switch back to the first terminal there are just come Gnome startup messages.
I really need to have this working in order to do some "work". give me a sure fire way of either fixing this, even if it means instructions on re-installing Gnome? Normally I could copy log files from my Linux machine to my email computer but with no desktop I find this too difficult and really don't have the time to spend working out how to do it. (I have "work" to do as well). So, just briefly I will summarise the Xorg.0.log file:
[Code]....
View 6 Replies
View Related
Oct 22, 2010
On Maverick, I noticed a couple of days ago when I started an MP3 of a single tone recording it had a 'crackle' for about a quarter of a second at the start of playback. I initially thought there was a problem with the recording but I have noticed it is universal and I now pick up it is happening on some songs too (particularly if they start on a single note, not all songs seem affected).
This is a problem if I double-click a sound file which I open in Totem, it's also a problem if I start playing an affected track on Rhythmbox, it also happens if I just hover the mouse to start playback, but interestingly any problematic file if I load into Audacity there is no problem at all and the file plays correctly.
I doubt anyone else will have noticed this bug as it is so small and I wouldn't have picked up on it had I not been playing a single tone recording, but now I have picked up on it I can detect it all the time which is annoying. Has anyone else noticed at all?
View 1 Replies
View Related
Mar 9, 2011
I am having a really annoying problem here. Every time when I use my Computer while listening to music, or watching a video, I get some sort of crackling in my Audio. For example, playing a mp3 with Rhythmbox (or Banshee or Totem, doesn't matter really) while browsing the web is just horrible, every time I scroll down the page (Mouse wheel or keyboard) I get that noise. Just listening to the music while not touching the Computer works just fine. It does not seem to be CPU related, my reason being: I can max out my CPU, rendering a 3D graphic and still have crystal clear sound, but browsing down some big file-folder at the same time will distort my audio.
The same goes with games which are a bit on the high CPU side, like Nexuiz with high graphic settings: No sound problems at all. I am using my on-board sound, which lspci lists as VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10), pure ALSA setup, no pulse/esd or anything of the like installed. Switched to unstable to see if a more up2date kernel or updated alsa would do the trick, it didn't! I am running Debian Unstable - 2.6.37-2-amd64 kernel, Gnome-Desktop. Here's what I did to make my sound work in the first place, since my squeeze didn't recognize my sound-setup out of the box:
To make my onboard sound system-wide default I created /etc/asound.conf:
# Modified as per [URL]
pcm.!default {
type hw
card VT82xx }
ctl.!default {
type hw
card VT82xx } .....
View 2 Replies
View Related
Jul 5, 2011
Running Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies
View Related
Sep 8, 2011
I can play sound files with aplay, esdplay, and vlc, but I don't get any sound from iceweasel and chromium.
I installed a squeeze base system (without gnome and without the standard system utilities), then added (using --no-install-recommends) xserver-xorg-core, xdm, fluxbox, alsa-base, alsa-utils, alsa-oss, iceweasel, chromium-browser. Here I checked for sound and there was none from the browsers. I have since installed vlc, esound-clients, alsaplayer-esd, gstreamer0.10-alsa, and other software that didn't look sound-related and didn't change the symptoms.
Setting ICEWEASEL_DSP to "aoss" or "esddsp" doesn't help. Neither does "chmod -R 777 /dev/{audio,dsp,midi,mixer,snd}". snd-pcm-oss and snd-mixer-oss are loaded. Both my account and root are in group "audio". Running the browsers as root doesn't help.
This is the output of chromium:
In case it makes any difference, all of this happens in a qemu-kvm virtual machine with an emulated es1370 soundcard. Same with sb16 soundcard.
I would prefer not to install everything vaguely related to sound in the repositories in the hope of things fixing themselves. That's just ugly, plus I have only 200MB free space left.
View 1 Replies
View Related
