As of late I've been getting annoying video anomalies (see attachment) when using nvidias proprietary driver. I'm running ubuntu 11.04 64bit, my card is a 240 GTX and the nvidia driver version is 270.41.06.
View 1 Replies
I'm using my Ubuntu 10.04 as a server, headless or with HDMI receiver/TV setup. There is a lot's of topics how to make it work headless/VNS. I found the least trouble is to make a fake VGA from old VGA cable and 3 resistors. However, when I start my Ubuntu with Fake VGA it won't switch to HDMI when I turn my Receiver/HDMI on. If I restart X it is fastest way to pick the HDMI Video/7.1 Audio up. I can do it via VNC or ssh and going to do it with 'irexec' so my wife will be able to redetect the HDMI and run XBMC with one button click of the remote.The problem is restarting X kills all my GUI apps (KTorrent, ...). Is there a way to force the video driver to restart or redetect the screens?
View 1 Replies View RelatedFirst impressions I really like Debian, been running a server with it for a while and just last week switched to it on my main workstation.
I have only had one problem with video. I have a Geforce 210 with 1gb (1024x768 resolution) of ram and the proprietary Nvidia drivers installed from a repo. Thing is, in all video whether flash in my browser or movies in vlc, mpv, and mplayer, I have these weird overlays that scan over the video, especially in scenes where the camera zooms in, long distance shots seem unaffected.
Also, almost every video I start whether flash or movie file, I get a flash of a green bar at the bottom of the screen very quickly and barley noticeable.
Now I know thats a rough description so I attached two screen shots (link at bottom of post), the affected area is circled in red on one, also I have attached a png of a similar image that may be more enlightening.
Notice the quality of the second screen shot, especially around Will Ferrell's head, and the greenish yellow line leading down his shoulder and arm. The general quality seems terrible. The film is in 720p and looks great in Mac.
I had the proprietary drivers installed in Slackware 14.1 and Mac OS 10.10.5(Nvidia Web Drivers) on this system, with this card and did not have this problem.
I'm in gnome latest version.
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
Subsystem: Device 196e:082e
Kernel driver in use: nvidia
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
Subsystem: Device 196e:082e
Kernel driver in use: snd_hda_intel
[URL] ....
Switched Nouveau same result....
I have the most bizarre problem that started with 10.04. Up until 10.04 I had zero problems with my setup. I am convinced this has something to do with NVIDIA 7100GS and 10.04.
Here is the problem in a nutshell. I have my home desktop, which I upgraded to 10.04 from 9.10. Everything went just fine except when it booted up and I logged in, the video "shut off", the computer "hung" for about 10 seconds, then came back. I'm able to use it for about 10 seconds then the same thing happens. Video blanks, system hangs, comes back.
I've tried turning off compiz, no effect. I've tried nvidia-current along with other versions (including the one from the website) and they ALL have the same problem. I know it's not a hardware issue as I can boot the live CD just fine. I also upgraded to 10.04.1 and that worked fine until I installed the nvidia drivers. Here is what I dont understand either. I did a apt-get remove --purge nvidia* and the problem still existed after that.
Something is seriously wonky. I REALLY don't want to re-install the entire box. Now, here is something else that doesnt make sense. I have 10.04 installed on my work box with a Nvidia 9800 graphics card and I have no issues at all.
I just bought a new desktop with integrated intel graphics and built in HDMI. I don't have a monitor, only a 42 inch LCD TV. Now, when I plugged in the HDMI cable, when ubuntu loaded, it was oversized(overscanned) cutting off both panels(think zoomed in a bit). After failing to fix, I bought an ATI HD4350. When using the open source ati drivers(default on reboot), the screen looked perfect and fit perfectly when using the DVI to HDMI cable to the TV, was a bit UNDERsized when using a regular HDMI cable to the HDMI port on the new video card. Now, when I installed Catalyst...same problem as before. Entire image was overscanned using either port. Decided to get a better video card anyways, so returned ATI for Nvidia 9500. When booting again into a clean install, with nv drivers and using DVI-> HDMI cable(9500 doesn't have HDMI out), the image again fit perfectly on the TV. When installing the Nvidia proprietary driver, image goes back to being overscanned(Exactly same proportion as intel HDMI out and ATI with catalyst). Thankfully Nvidia gives an overscan correction tool that I scaled the picture down with, but it's ever so slightly off center or our of proportion(that is, it leaves small black strip on either side when height is adjusted perfectly).
In a nutshell, the open source drivers display perfectly. Proprietary and intel drivers are overscanned. Now, to confuse you anymore, with Lucid, even the open source ATI driver is overscanned by default. I'm trying to track this problem down and have no idea where to start.
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
I just installed an nVidia driver for my Dell laptop running the latest flavor of Ubuntu (Lazy Lynx, or whatever it's up to). After it rebooted, the screen came up black. I have no video. How do I get rid of this driver and get my video back?
View 11 Replies View RelatedCurrently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
View 3 Replies View RelatedI am running fedora 11 64bit version and just installed cedega to run a few games. I have Nvidia Geforce 9800M GTS 1GB graphics card. and installed my graphics drivers via: yum install kmod nvidia. i downloaded and installed the cedega application from the Cedega download
[Code]...
how do you install an nVidia video driver?
View 1 Replies View RelatedThe nouveau driver coming with the free fedora does not even allow to run Gnome 3, so I'd like to install the Nvidia driver. So far I did not succeed as the nouveau kernel module is loaded at an early stage. How can I remove the nouveau driver?
View 6 Replies View RelatedI have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.
[CODE]
New pooter, just installed SuSE 11.1. Would appreciate some insight into which Nvidia driver is right for my system, and what is the maximum resolution I can use without potentially causing any damage (if that's even a real concern).Here are the specifics.
[Code]...
So, now the questions.
a) Should I leave both sets of drivers installed, or should I delete one of them?
b) If delete, which should be taken off?
c) If neither of these drivers is the right one, which do you suggest I get instead?
d) I currently have the resolution set at 1920X1440. Is there any reason to worry that I might be overdriving anything and potentially causing damage to the system?
What is the best place to get an updated nVidia video driver for CentOS 5.5? Is there a CentOS package available that will update it? Or is it best to download it directly from nVidia?
Also, I do not have an internet connection on the machine, so it will have to be a manual download and installation.
I am try to install the nvidia 96.43.16 driver for a Gforce 2 MX-400 video card following this [URL].. When I ran the 'rpm -e --nodeps xorg-x11-Mesa-libGL' command the the package wasn't installed.
When I ran modprobe nvidia it wasn't found either.
Being a newbe I had no idea what to do next.
What is the best place to get an updated nVidia video driver for CentOS 5.5? Is there a CentOS package available that will update it? Or is it best to download it directly from nVidia? Also, I do not have an internet connection on the machine, so it will have to be a manual download and installation.
View 1 Replies View RelatedHow can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies View RelatedI use a debian testing, I can't drive graphics card，open source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?
View 5 Replies View RelatedWhile installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.
Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?
I have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the
microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
Under Fedora 12, I have installed the proprietary NVIDIA graphics driver successfully and am now attempting to use the onboard HDMI output. (The board has HDMI and VGA out built in.) I am getting a clear picture on the TV screen, although the edge of the screen output hangs off all edges of the physical screen. The HDMI audio output is being detected, but no sound come out of the TV when I switch the sound output from the Analog Sterio Duplex to HDMI Output in the Sound Preferences. Any suggestions, and what further information is required?
View 9 Replies View RelatedI went back to Suse 11.2, it comes with the 'nv' driver for my NVIDIA Quadro2 Pro (64 MB) and I'm getting some slow performance on browser display and sometimes video playing. Not always, I recently saw a 2 hr long movie on Blue Ray resolution, so the problem is not hardware, it's software. I saw several links here on how to install other drivers and a 1-click install link on this page but my question is, since this is an old card... which driver is the best for this card ?
View 9 Replies View Relatedi just instaled bt4 on my hdd and i have a problem with instaling drivers... i cant find and install driver for my video card nvidia 8200 integrated on motherboard. exacly i got the problem with changeing video resolution... i have only 640x480 and 800x600, and here is the problem, i cant put it in 1024x768..
View 6 Replies View RelatedI have a Macbook Pro which i want to install Opensuse 11.2 64bit(Upgrades to 11.3) The problem is that once i install opensuse and then boot via rEFIt, it loads up till the desktop is supposed to appear. All i get at this stage is darkness with a few coloured shapes in the background (Video driver not loaded).I can however reboot and go in via the failsafe option. Once in here i can use the GUI. I am a total noob with linux, can some one give me the instructions on how to install this driver. Its driving me insane. When i run uname -r, the results are 2.6.33-6-default I have added the following http repository (download.nvidia.com/opensuse/11.2/)
View 3 Replies View RelatedI am trying to update my Nvidia MX 480 GFX card. Today I figured out how to run the program as a root:
Code:
I run that and then this is what it gives me.
Where I got the link to download the nvidia driver from: [url]
I've installed 9.10 and wish to use the nvidia-glx-173 driver as recommended by jockey. Using the jocky GUI just hangs at 100% cpu, a significant portion of which is the cdrom process; I've tried installing the package directly in aptitude and get the error:
Code:
Media Change: Please insert the disc labeled 'Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)' in the drive '/cdrom/' and press [Enter]. The installation disc (standard x86 disk from shipit) doesn't satisfy it. How do I get aptitude to just download it from online repositories?
I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. My goal is to play back 1080p video. I read somewhere that the nouveau driver that installs by default with ubuntu 10.04 does not support VDPAU. So, my first step is to install the nVidia proprietary driver. I tried following a half-dozen different guides for doing this, none of which worked. Let's take this one for example: [URL] I purge. I reboot. I run the Nvidia installer (NVIDIA-Linux-x86_64-195.36.24-pkg2.run). I get:
Code: ERROR: Unable to create '/usr/lib/nvidia-current/libGL.so.195.36.15' for copying (no such file or directory). So, I run: Code: sudo apt-get install nvidia-glx-185 nvidia-185-modaliases I try the nvidia installer again. It works. I reboot. I get a message saying that ubuntu is running in low graphics mode, because loading the nvidia kernel module failed. I check /var/log/messages and see: Code: API mismatch: the client has version 195.36.24 but the kernel module has version 195.36.15. I take a Tylenol and here I am.
I just performed a clean install of Kubuntu Lucid earlier this week after deciding it was time to upgrade from Hardy. Pretty much everything worked, until I attempted to install the proprietary NVIDIA driver.
OS details: Kubuntu 10.04 x64 Kernel 2.6.32.22.What happened when I tried to install the proprietary nvidia-current package was simply that it didn't work. I could open the nvidia utility, it would say the driver was not in use. Attempts to force the issue by running nvidia-xconfig would render the X server unable to start, which gave me some quality time in a shell console with APT or restoring the xorg.conf file from backup. Trying to compile and install the driver from nvidia also wasn't working out so well.
I think the issue boiled-down to the install presumably attempting to upgrade the kernel during initial install from CD, but not doing so completely. I had all the appropriate 2.6.32.22 kernel and header packages, but GRUB was apparently still booting to the 2.6.32.21 kernel (which had no headers or anything) and not giving options to boot to the upgraded kernel.
How I fixed this was to remove all packages related to the 2.6.32.22 kernel via APT, then remove all the 2.6.32.21 kernel packages. That second operation triggered the 2.6.32.22 kernel to be reinstalled, and GRUB to be configured correctly to boot to it. At that point, I reinstalled nvidia-current, and it worked. I tried this after determining I was on the 2.6.32.21 kernel, and had no option to boot to the 2.6.32.22 one.
Your mileage may vary. In retrospect, I probably could've fixed it by fixing GRUB to boot to the current kernel. This appears to be a consistent issue, as I reinstalled at one point, just to start over, and went through the same thing again.
I suspect the driver I obtained from the nvidia website and patched (due to issues it has with recent kernels) might work now that I'm booting to the correct kernel with headers, but I think I'll save that for another time since nvidia-current is working great for me at the moment.
I wish to update my nvidia driver (I was running 195.36.24 and I want to update to 195.36.31). I followed all the instructions on this thread (http://ubuntuforums.org/showthread.php?t=1467074) and everything went well until this part:
Code:
sudo sh blahblah.run
The error I get in the terminal reads: You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL]...I have no idea how to exit X as it's not in my system processes.I have updated my nvidia driver in the past but have never encountered this problem. I'm running Ubuntu 10.04 on a Dell XPS M1530 if that matters.
