Debian :: Nvidia All Video Has Strange Hue Around Certain Elements
Nov 28, 2015
First impressions I really like Debian, been running a server with it for a while and just last week switched to it on my main workstation.
I have only had one problem with video. I have a Geforce 210 with 1gb (1024x768 resolution) of ram and the proprietary Nvidia drivers installed from a repo. Thing is, in all video whether flash in my browser or movies in vlc, mpv, and mplayer, I have these weird overlays that scan over the video, especially in scenes where the camera zooms in, long distance shots seem unaffected.
Also, almost every video I start whether flash or movie file, I get a flash of a green bar at the bottom of the screen very quickly and barley noticeable.
Now I know thats a rough description so I attached two screen shots (link at bottom of post), the affected area is circled in red on one, also I have attached a png of a similar image that may be more enlightening.
Notice the quality of the second screen shot, especially around Will Ferrell's head, and the greenish yellow line leading down his shoulder and arm. The general quality seems terrible. The film is in 720p and looks great in Mac.
I had the proprietary drivers installed in Slackware 14.1 and Mac OS 10.10.5(Nvidia Web Drivers) on this system, with this card and did not have this problem.
I'm in gnome latest version.
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
Subsystem: Device 196e:082e
Kernel driver in use: nvidia
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
Subsystem: Device 196e:082e
Kernel driver in use: snd_hda_intel
[URL] ....
Switched Nouveau same result....
View 1 Replies
ADVERTISEMENT
May 10, 2011
As of late I've been getting annoying video anomalies (see attachment) when using nvidias proprietary driver. I'm running ubuntu 11.04 64bit, my card is a 240 GTX and the nvidia driver version is 270.41.06.
View 1 Replies
View Related
Jul 15, 2009
I intend to update my video card to allow the operation of all three of my monitors in a triple monitor configuration. I have a 790i motherboard with Nvidia chips, so I will most likely choose an Nvidia card for the upgrade. As I will need connections for three monitors, I will have to have two cards. It is my intention to have one large screen field spread across all three monitors. I assume the best way of doing this will be to use an SLI Bridge to link the two video cards. Thus the two video cards must be identical.
Question 01: Is this the best way of realizing a triple monitor setup?
While I am upgrading, I desire to also give the system the ability to play Blue-Ray High Def Movie one of the 1920x1200 monitors I will be using.
Question 02: What are the pitfalls of playing BD-Discs on Debian. I know I will be eventually acquiring a BD-Disc player (once the prices come down a bit more), but when shelling out for two video cards, I better think as far ahead as possible and get the two video cards that will do everything I can foresee them needing to do.
Question 03: As all of my monitors have HDMI input ports, I assume that I will need Video cards that have HDMI output ports to play full 1080P movies. Is this a valid assumption?
Question 04: Can anyone recommend a video card that does what I am wanting it to do? (This is to say Two Dual Link DVI connectors and an HDMI connector per video card with standard and high definition video playback capabilities). Keep in mind that I will most likely need to purchase two of them, to the Super Expensive Bleeding Edge cards are probably not going to be a practical option here.
Question 05: Is there a way that I can just play the BD-Discs with full resolution in a window on one of the three monitors I will have connected to the computer without having to go the HDMI route?
View 5 Replies
View Related
Jun 21, 2010
Having been using squeeze on my primary system for some time, I decided to install it on my media center PC. After doing a clean install I lost sound (another post) and my maximum video resolution dropped to 1280x1024. I was previously getting 1920x1080 (native) resolution under lenny on this box. So it's a mystery to me why I'm not getting that now. As you can see, the nvidia module is loaded:
# lsmod | grep nvidia
nvidia 9821382 0
i2c_core 12570 2 i2c_piix4,nvidia
PS--This was installed the "debian way" via module assistant.
View 2 Replies
View Related
Feb 18, 2016
I have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.
[CODE]
View 7 Replies
View Related
Nov 3, 2010
I have background in ArchLinux though, and have successfully installed, configured and used it on one workstation and two laptops. owever, i just got a new PC and spent several days trying to get Arch to run on it. Finally, i decided that i don't want to spend my time on this anymore and thought that maybe it's a sign i should try other distros (even though theoretically Linux is Linux is Linux), and Debian has always been appealing to me.
So my question is, has anybody had any experience (or issues) running Debian on the hardware mentioned above? I'm actually contemplating Ubuntu already, because there's a chance it will spare me some time and configure everything by itself, but the pride of a person who used to configure Linux from scratch doesn't let me switch to Ubuntu yet
View 4 Replies
View Related
Apr 1, 2014
I am running Debian 7.0 Wheezy amd64...I installed Debian's nvidia driver earlier but I was having a few issues with OpenGL. So I removed those drivers using "apt-get remove nvidia*" and installed proprietry NVIDIA's driver from their website.Now the issue is, my apt-get/synaptic does not work anymore because it is trying to remove xserver-xorg-video-nvidia and failing to do so.
Code: Select allThe following packages will be REMOVED:
xserver-xorg-video-nvidia
0 upgraded, 0 newly installed, 1 to remove and 4 not upgraded.1 not fully installed or removed.After this operation, 17.8 MB disk space will be freed.Do you want to continue [Y/n]? Y
(Reading database ... 194280 files and directories currently installed.)Removing xserver-xorg-video-nvidia dpkg: error processing xserver-xorg-video-nvidia (--remove):Β subprocess installed post-removal script returned error exit status 128.Errors were encountered while processing: Β xserver-xorg-video-nvidia.E: Sub-process /usr/bin/dpkg returned an error code (1)I have tried apt-get install -f to no avail.
View 6 Replies
View Related
Aug 23, 2011
Recently, I installed VVVVVV and discovered that when attempting to use fullscreen mode, the monitor displays "video mode not supported" for 640x480, 800x600, 1024x768, and auto. After googling around for an hour or two (and only finding stuff from 2008-09) I have created a new xorg.conf from Xorg -configure and nvidia-xconfig. This doesn't seem to have had anyeffect.DebianRelease unstable (sid)Kernel Linux 3.0.0-1-amd64GNOME 3.0.2GeForce 7600 GSMonitor: Hyundai Imagequest
$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 280.13 (pbuilder@cake) Mon Aug 8 15:37:15 UTC 2011
[code].....
View 4 Replies
View Related
Sep 7, 2014
I use a debian testing, I can't drive graphics cardοΌopen source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?
View 5 Replies
View Related
Jul 17, 2010
Whenever I have the composite manager setting ticked my videos get strange lines when I play them but when compositing is not enabled the videos are fine.
View 3 Replies
View Related
May 10, 2010
I've recently hooked up my pc to my very old TV-set and I've managed to get TV-out (S-video) working fairly quickly.BUT, I'm having a weird issue. The picture on the TV-set is distorted with 'white-lines' running through it horizontally.Its difficult to describe, but it looks a little like a sheet of writing-paper splashed across the screen... I've searched around and haven't found a solution yet. The weird thing is, that running windows, I get no such display corruption.I'm using the very latest xf-video-ati driver atop a r300 (radeon 9600) card. The TV is a very old model, PAL standard.Output from xrandr:
Code:
Screen 0: minimum 320 x 200, current 1280 x 960, maximum 4096 x 4096
VGA-0 connected 1280x960+0+0 (normal left inverted right x axis y axis) 355mm x 266mm
[code]....
View 10 Replies
View Related
May 1, 2016
Every single theme has at least one or more broken UI element. In Arc, I'm missing highlighting in the context menu, and in Numix, some application's backgrounds are just completely black. All of these themes don't give me a urlbar. I'm also missing a lot of boxes. There is no box around the word "submit" in reddit, and neither around "cancel". If you go into the search bar, I'm missing the checkbox for "limit my search to /r/...". I know these themes work, because I had them working in my last install of Debian. Except, last time I used the XFCE iso instead of the netinst. Even default themes, like Raleigh, are not working correctly. I installed all the necessary packages like the gtk2 murrine engine, but if the default themes aren't working then something is definitely missing.
View 0 Replies
View Related
Aug 9, 2011
I am trying to get my Debian system running. I have an older Dell Precision 490 with two dual core CPUs. It has 16G Ram, an 150G Intel solid state drive, a 230G data drive, and a 600G backup drive. I have two Samsung monitors attached to the NVIDIA Geforce FX 5xx card. I have been using this machine for several years with Etch, then Lenny, running KDE 3.5. I recently needed to upgrade to Squeeze and KDE4 and have had nothing but problems since. I keep having issues with the video drivers, every time I touch anything the drivers seem to upgrade from the legacy 173 to the current 195.
There have been other library compatibility issues as well (gclib) and the machine has not been stable. This morning the system was running very slowly with X running at 100% (from top) and then the entire system froze. After a hard reboot, X did restart. The Xorg.0.log has the following message:
"Failed to initialize the NVIDIA kernel module! Please ensure that there is a supported NVIDIA GPU in this system, and that the NVIDIA device files have been created properly..."
View 1 Replies
View Related
May 3, 2010
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
View 9 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
May 20, 2015
I am using Debian 8 with gnome, about month ago the style of the windows of third party apps has been change
example:
before
after
as you can see the style of the buttons, tabs, etc has changed. I dont know how to fix this or how this elements are called. This style is look very old and I want to change to the default..
View 4 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
Jan 18, 2010
i do have a strange problem get running php5 on lenny 64 inside apache2. i had installed it as all instructions on the web does: # apt-get install php5 libapache2-mod-php5 php5-cli php5-common php5-cgi
apt has enabled php automatically, so
/etc/apache2/mods-enabled/php5.conf does have inside:
<ifmodule mod_php5.c>
AddType application/x-httpd-php .php .phtml .php3
AddType application/x-httpd-php-source .phps
</ifmodule>
[Code]...
View 3 Replies
View Related
Apr 19, 2010
Trying again here.. no-one on reddit seems to respond..It initially happened here (it was deleted, you can try the lower links.) Sometimes one, sometimes both of these links gets me to 'attack sites', it starts with both, then to one, and then neither does it. I am on Debian Lenny, Both Iceweasel 3.0.6-3(firefox), epiphany2.22.3-9, elinks0.11.4-3 and firefox 3.6.3 sometimes do this for me. It doesn't seem to happen if you enter it into the adress bar, but it does when you follow it by clicking.[URL]..Someone else reported it too, from XP w/ Firefox. The adress bar tells me it is subreddits.org the but the screen doesn't. (Worry my computer is compromised..)
Links it send me too, something on 89.248.174.24, orcug.com, thindx46td.xorg.pl and a whole range of varying other sites. http://i.imgur.com/d7ZGv.png So can you reproduce/any idea what this could be? I do worry about having some malware on firefox and such, also besides this, but as i said, it happens with other browsers. I have add-on flashblock, noscript, redditreveal, socialite, trackmenot, had tree style tab until i found it wasn't usefull enough. I also noticed that control+k gets me to bol.com (wtf is up with that??), and there was the random site you get to when you misclick.(Which i was able to disable.) I am gradually getting more and more pissed off and suspicious about firefox. (as on my computer.)
Firefox also seems start reading/writing from disk suddenly. (I use iotop when i think it shouldn't be writing sometimes.) Perhaps i should try set something up to record what writes to disk.
View 2 Replies
View Related
Mar 16, 2010
Anyone know what the 'ls' command means when it outputs the file name in red on black, with the permissions, owner, etc. all missing? The 'man' page was of no help. In the example below, from a DVD ROM, the third file was OK and I could read it. The first two could not be read, even as root.
?--------- ? ? ? ? /media/dvdrom/DVD_RTAV/VR_MANGR.BUP
?--------- ? ?? /media/dvdrom/DVD_RTAV/VR_MOVIE.VRO
-rwxrwxrwx 1 root root 132624 2007-09-20 02:18 VR_MANGR.IFO
View 5 Replies
View Related
May 10, 2009
I am reciving a strange backtrace furing the boot process of an IBM thinkpad 600 with debian lenny. The errors appear to be in the 'cs' module, but I'm not sure. Also the "Waiting for /dev to be fully populated..." script in which the backtrace occours also hangs and hasto be Control-C'd, or you have to wait for it to time out. Attached is my syslog
View 9 Replies
View Related
Feb 8, 2011
Laptop is Dell Latitude C600/C500 with Pentium III 850Mhz, 256Kb L2 Cache, 256MB RAM, ATI M3 video card, HD 20005 MB and sound card is EES Maestro 3i. After trying to do something with Windows 2000 which was installed on the machine, I decided to put Linux without keeping windows on the machine. First I try with Xubuntu (latest version) which was working but slowly, then I found that Debian could work fine on that machine. I have installed latest version 5.08 and was surprised how goodly old machine can work. I solved problems with screen resolution (change from 800x600 to 1024x768) but I couldn't find solution how to fix problem with sound.
Actually I don't have sound on the machine. I looked for a linux driver for that sound card and Dell is only providing windows drivers. Then I found that I can solve the problem with ALSA drivers but I couldn't find the easy way (or any way at all) to install drivers and to get back the sound. When I click on 'Volume Control' (top right corner of the screen) I get the message: 'Volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured.'
View 14 Replies
View Related
Feb 26, 2010
After a reboot the mouse pointer suddenly started to act very strange...For example horizontal movements move the pointer verically and moving it to the left also scolls down... left click and right click still works, but not the scroll wheel.I have not done any changes related to X (X11R7).The mouse is a wireless usb logitech mouse, with this "nano reciever"-thing. It has worked without any configuration before.I have not tested any other mouse as this is my only one. I will try to get another mouse for testing
View 3 Replies
View Related
Aug 22, 2010
when i run dpkg-reconfigure locales and the gui comes up its mostly strange characters like in the picture.URL...Its like that on every gui im opening.its an vps im ssh'ing to. So my first guess was that it was an ssh client error but i cant change anything in the client,im using tunnelier.
View 2 Replies
View Related
Oct 14, 2015
URl...how wide are the spaces between these entries. A quick research shows that this affects only certain apps such as gnome-terminal or Anjuta, but doesn't affect for example Synaptic - my first thought was that it's related to these using GTK3, but now I can see it's not that. This is not theme-related as it appears no matter what theme I choose. No results by googling.
View 2 Replies
View Related
Apr 18, 2016
I can't find the reason cups pdf driver do this. I created my default printer as is told:
CUPS PDF--> Generic Printer--> Generic CUPS-PDF Printer
The pdf created shows well, but when i drag to select and copy text, it copies some strange characters as following:
ββββ
βββββββββ β‘β βββββ‘β β ββββ ββββββββ ββββ βββββββ βββββ
ββββββββββ β’ββββββ βββ βββ£βββ β β€βββ₯ βββ¦βββ£ββββ
ββββ
ββββββββββββββββ ββ ββ£β βββ£ββ ββ£βββββ§ββ£βββ
ββββ£ββββββ
View 3 Replies
View Related
Jul 1, 2011
I have just installed squeeze 6.0.2 amd64 and noticed when I use k3b to burn/verify a disc, when it has finished burning the media it plays a sound, and rather sound is played which sounds very crackly/muffled.I do not remember this on ubuntu, and I cannot say for sure but I dont recall this happening on squeeze 6.0.1.
Sound plays perfectly in all other applications, no problems whatsoever.This is not a big deal, I just dont remember this happening. I know this isnt the most detailed posting but does anyone have any idea what this could be? I even tried to reinstall k3b through synaptics and the problem still persists.
View 6 Replies
View Related
Dec 28, 2015
I have sucessfully installed Debian 8 stable onto a powermac G5 with and Nvidia FX5200 graphics card, and got the graphics up and running using the nouveau.modeset=0 kernel parameter. However, now the screen is showing completely messed up graphics. The kernel parameters that I have set are: nouveau.modeset=0 and video=TV-1:d.
I've now tried other Desktop environments and they too are messed up. Even window maker is messed up.
View 5 Replies
View Related
Mar 16, 2010
I like the "Ubuntu" sudo philosophy and wanted to setup this sudo the same way on my Debian system. I was happy when I found that I just have to do the following:
-create a group 'admin'
-adduser christian admin
-visudo
-add the line: %admin ALL=(ALL) ALL
Then I tried sudo rm -rf / to check if sudo works. All worked fine. No, seriously, I can move around files that belong to the root and such, so sudo somehow works. But when creating new files with sudo, like e.g.
tar xzf myZippedTarball
these files belong to user 41034 and to the group users instead of root root:
drwxr-xr-x 7 41034 users 4096 2009-11-01 01:07 libsvm-2.9
Certainly, this is not the way I want to have. The user 41034 doesn't even show up in /etc/passwd...
View 2 Replies
View Related
Oct 18, 2010
I use Debian Lenny on desktop. On bootup I get this strange message
Code:
Question one: what is hub 2-0:1.0? A utility? A library? A module?
Queston two: what does "enumerate" mean in this context?
Question three: I can't figure out what "port" is meant: a networking port something on the motherboard one of several I/O port/connector/sockets on the back of the computer? (Hope you know what I mean--- you stick USB connectors into them to connect your computer to a USB device, such as a USB mouse.) the one and only networking port/connector/socket on the back of the computer.
Possibly relevant: I sometimes but not always have a USB cable connecting my printer to one of the USB ports/connectors on the back of the computer at boot time. But the message always refers to "port 1", never 2,3,4. due to lack of options for getting on the Net, I use an Actiontek router which demands to be given 192.168.0.1 which would otherwise be taken by my computer, which instead gets 192.168.0.2. (Grasping at straws...)
View 5 Replies
View Related
