I am attempting to connect a bluetooth headset to a Telex Intercom System. I can connect my bluetooth headset to Ubuntu and use the microphone and the speaker perfectly. There are no problems with the Line-In or the Line-Out.
Is there any way to connect the BT-Microphone to the Line-Out while connecting the Line-In to the BT-Speaker?
I am currently trying to start doing some screen casting and having a problem with audio recording in gtk-recordmydesktop. The problem is that I need to record both; my computers audio card output, and my mic input at the same time. As of now I am able to record one or the other.
View 4 Replies View RelatedI have a TV card connected to my Dish box, and I would like to use it on my computer. The tv card works fine, and the audio is connected to my line in. The audio card receives the audio signal, and I can set the volume and record it without any problem, but I can't get it to redirect to an output in order to hear the sound. I have been battling with this issue since a kernel update back when 11.2 was about to come out. Back then, the alsa mixer had an option called audio loop-back, which did the trick. Since I know I ca record the audio and play it back without any problem, is there an application that can do this automatically and simultaneously?
View 1 Replies View RelatedFor some reason on any application that uses sound, but doesn't allow me to specify the input/output audio devices I don't get anything. I want all audio to go to my USB Headset, and not the onboard soundcard. To start off with, here's alsamixer: Here's a screenshot from Mumble (voice chat) that shows that I've set the USB headset device in there, and it works 100% fine on Mumble.
[Code]...
As you can see from the alsa-base.conf above I've tried specifying snd_usb_audio as the default device, but it's not working.
I'm a new user of Linux and just recently installed Debian 8 on my computer, an Emachines W3118. My problem is that the audio went out a couple of days ago and I don't know WHY it went out, no audio, and HOW to get it back on. I tried several command line methods that didn't work, probably because they didn't completely relate to the problem with me being a Linux beginner and all. When I manually turn the knob on the speaker up, I can hear noise to where the speakers sound like they're physically operational, but with no output or input.
View 10 Replies View RelatedI installed KMplayer but I cant play video files...No video output but can get only the audio output...So how to make this work for videos?
View 2 Replies View RelatedRunning 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
I am trying to record using a microphone without success. Checking my audio settings on the input tab all remains silent. I also checked the input channels using alsamixer and all looks correct.
My Alsa information can be found here: [URL]
I cant play mp4 files with dual audio and dual subtitles. I am using a laptop with intel graphics. I've already tried mplayer, vlc, and smplayer. But still the files wont play properly. I been jumping all over the forums reading and trying anything i come up to. What do I need to do? oh btw I am using Ubuntu 10.04.
View 3 Replies View RelatedI use the growisofs command from the terminal to do most of my burning. Mostly because i burn almost the exact same type of file every time so its pretty easy to set up. I've done this dozens of times and never once had a problem before. I loved it because it was so much simpler than doing this in windows where i would need to install a few extra programs and codecs. That was up until today where it started failing every single time i tried to burn something.
For some reason every time i try to burn a disc it gives me this error message:
Code:
I'm really at a loss as to why this is happening. Every thread i found that discussed this problem was mostly focused on k3b or brasero and never really answered the question. As far as i know nothing has been updated since the last time i burned a disc a few days ago. Everything is exactly the same as it was when it worked. The only thing i could think of that might have caused this sudden failure is that i flashed the firmware of another cd drive using the same sata port that this drive is currently plugged into, but that was in windows so i dont see how it could have affected this drive.
What i am trying to acomplish is this
Code:
I have found a few guides that were to accomplish this, but they seem outdated as options they call for are not available to me.
For some reason my soundcard is recording every playback sound. This become apparent when I was trying to make a Skype call and the other people couldn't hear me. I checked my sound preferences and noted that the input was recording what they say (they could hear an echo). Also if I played back anything it would redirect to them. This has never happened to me and I've made a lot of calls in the past.
I tested with Audacity and it records fine, but when I play back the recording, it redirects to the input channel so it's not a problem with Skype. (my soundcard is a VIA VT1708B 8-Ch). Somewhere I read that the output of aplay -l is useful.
Here it is:
I'm using FFADO on JACK in order to use my firewire device (M-Audio Profire 610) and I seem to have the opposite issue as others who have similar problems. Everything starts up fine, and I can record audio into Ardour using my inputs, but I can't get any output from any of my 8 line outs.
I've checked the connections using QjackCtl, and I tried to route audio from another program (Audacious) but I can't seem to pull audio out of the device (or the computer won't send my device audio?).
I used to be able to use Skype without a problem. I must have played with something as it now doesn't allow me to both use a microphone and external speakers at the same time.I go into sound setting and I am able to test the microphone (works) but then the speakers don't show, if I reverse the tests then the opposite happens.
View 1 Replies View RelatedI wanted to take an audio feed from a stereo amplifier into my HP Pavilion DV6 laptop, in order to digitally record some old vinyl.
In the Sound Preferences tab, I seemed to be able to record easily from the internal mic, but there seemed to be no easy way to switch the preferences to enable recording from the Line In socket on the laptop.
We tried muting the mic, this only caused the system to record nothing. We also tried all the various available options in "the Hardware Profiles" tab, "Settings for the available device", but no the laptop seemed to be getting no "line in" input with whatever profile we tried.
On Mac, it was as simple as switching the input sound preferences from "internal mic" to "line in".
No audio input device can be found in sound preference>input but in sound preference>hardware>it shows the input webcam recorder device.
When I use
Code:
alsamixer
onto terminal it shows this
and also i checked cable device and everything. And it was working till I last hour. I rebooted computer then there's some problem, I haven't change anything before or after rebooting.
Working on backing up my DVD library. Anyone know why Brasero would fail to copy data due to an input/output error? Movie was Toy Story 2, disc 1.
View 6 Replies View RelatedI'm trying to create an iso file in a terminal with the following command:
$cat /dev/sr0 > nameofdisk.iso
I get the following error
cat: /dev/sr0: Input/output error
I already checked and my optical drive is indeed /dev/sr0. I've hunted google a few hours trying to figure it out. Does anyone know why I'd be getting this error?
I'm having here annoying "problem" with my webcamera. Everytime I want to use it as a microphone it needs to be switched manually in sound settings menu. It's not a big deal but I would really rather let it be switched automatically like plug and play or something like that.
View 8 Replies View RelatedI have a headset microphone plugged into the built-in audio input. The output is plugged into an amplifier > speakers.
Pulseaudio is "helpfully" routing the microphone input signal to the speaker output. I do not want this. I go to pavucontrol and disable the "monitor of the internal audio analog stereo" -- and what I say into the microphone is still coming out of the speakers.
Google gives a lot of information about how to live-stream mic input over the Internet. And, I found this here (that's for karmic, I'm running lucid):
[URL]
... but that's about how to ENABLE loopback. It says loopback should not be enabled by default, but I very clearly hear that something is doing the same thing as loopback.
(Of course, I need to hear sound from applications that are playing, and when I'm dictating text into NaturallySpeaking running under virtual box, I need sound input to go there -- so turning the mic all the way down to zero is not the solution.)
I'm fairly sure I remember hearing this behavior ever since installing Ubuntu, and I didn't do anything to turn it on. I can't imagine most users would prefer this behavior -- if it's the default behavior, why? It makes absolutely no sense to me. (Sorry. It's one of those piddly little configuration things that costs a couple of hours of web searching time, and after a while I just have to give up, but not before becoming much more frustrated than I should have to.)
So, to be clear, here's what I want:
- Applications playing audio should send sound to the main output.
- Applications receiving audio input should hear the microphone.
- Microphone sound should not EVER go to the main output unless I have explicitly launched an application making the connection. (The signal goes input -> output even when NO application is open - hence my consternation.)
I'm using recordmydesktop for screencasts and currently use pavucontrol to select the monitor as the input source, as shown in many guides across the Internet, but I can't find anything on how to do it from the command line. How can I select a monitor as the audio input source for recordmydesktop from the command line?
View 1 Replies View RelatedI installed Kubuntu 9.10 one week earlier and installed VLC player in it. But from that day VLC player is playing the video but not the audio. Also Banshee player is not playing any audio in Kubuntu.
View 4 Replies View RelatedHave you ever wanted to record a sound heard from your computer or website? If yes outRec is perfect for you. This simple but powerful application let you to record your sound card audio output easily in a few steps and save it in different kinds of formats like wav, mp3 or ogg.
Download from [URL]
To get it work you need to install the dependencies with:
Code:
sudo apt-get install sox gambas2-runtime lame mplayer libnotify-bin libmp3lame0 gambas2-gb-form gambas2-gb-desktop gambas2-gb-gui libtwolame0
I am using Ubuntu 10.04 LTS - the Lucid Lynx. I am using the laptop to play video files and view it on TV using HDMI output. No problems. Requirement: to play simultaneously a different media file and be able to listen through say headphone / laptop speakers. While a movie audio is only heard on TV, other audio is heard only on laptop speaker.
View 7 Replies View RelatedI have a StarTech USB audio adapter which I have been unable to get output from in Suse. Pavucontrol allows me to adjust the output to this device, and even shows some signal when playing media. However, no output makes it to the headset/speaker jack of the USB device. There does not appear to be any issues with playing media to the internal sound card & speakers of the computer. I booted up a Live Ubuntu disk, the device was recognized, and output made it with no problem. This leads me to discount a hardware problem. I'm running Suse 11.4 on a Lenovo Thinkpad T420s.
View 9 Replies View RelatedI currently have my desktop setup with two displays, one of them being my living room tv that I run Boxee on. My problem is that all the audio runs through the same speakers preventing me from listening to music or gaming at the same time as when Boxee is in use.
I would like to know if it's possible to split the audio so that an application of my choosing only outputs sound through my headphones. I was thinking it would be possible with some of the controls in pulse, but if it is I cannot figure it out.
My friend has following configuration
Pentium 4 2.4 Ghz
256 MB DDR RAM
Western Digital WD1600AVJS-63WNA0 hard disk
PM8M-VHMS7104 VER 3.0 motherboard
The motherboard has Realtek sound card built in but there is no sound output. He is using Ubuntu 9.10.
Is it possible to convert a 2.1 channel mp3 or any video file to get a respective 5.1 file permanently so I could play them on external music system which is 5.1 speaker system. Any sites where i can usually songs n video with 5.1 channel.
View 2 Replies View RelatedI am interested in finding out the best way to get my audio to work from HDMI through my NVIDIA card.
[code]....
I don't get an option for HDMI. Here is the interesting part. The sounds work sometimes but not all the times. Most of the time the sound works on the OS default sounds but wont work for movies, streaming and music. I am running pulseaudio. I am new to setting this audio up. The headphones work fine.
I can't find any S/PDIF audio output options in System --> Preferences --> Sound. How do I enable S/PDIF audio output from my onboard audio?
View 4 Replies View Related