Ubuntu Multimedia :: Mp3s Report Incorrect Length To Amarok
Jun 9, 2010
Some (very few) mp3 files on my hard drive seem to self-report incorrect (much too long) lengths to audio players. I mostly use Amarok, but I've verified that the problem also occurs with other audio players. The files play just fine, but it's annoying that they're listed with incorrect length. Most of my mp3s are encoded using VBR, but I can't imagine that that's a problem ... and if it were, it would be occurring with a lot more files, I'd think.I'm guessing there's a problem with the file header itself on these files. Is there some way I can check this and correct it, if that is the problem? A quick check through Synaptic didn't turn anything useful-looking up, and neither did a search through these forums.
I'm running Ubuntu 9.10 on an HP Pavilion dv 6000 with a Centrino Duo processor and 2GB of RAM. I have the Universe, Multiverse, and Medibuntu repositories enabled.
View 3 Replies
ADVERTISEMENT
Jan 31, 2010
I would like to play the MP3 files that are stored on my Linkstation NAS through Amarok but I can't get Amarok to play them. The only way I can get the files to play is through Dolphin or to copy them to my local drive and play them from there.
Does anyone know how I can get the files to play through Amarok? I thought it would be easy seeing as I can play movie files from the NAS using Dragon Player and edit photos stored on the NAS using GIMP. Why won't Amarok play ball?
Am running Kubuntu 9.10 & Amarok 2.2.0
View 1 Replies
View Related
Jul 18, 2011
I've installed Opensuse 11.4 and even have the multiboot working (at last) and firefox running at more than a snails pace, but this latest problem is really stumping me. I suspect it might be a little more fundamental than just amarok and mp3's but that's where I see it.
So, when I run amarok it asks if I would like to install MP3 support So I click on affermative and, since I added the neccessary repositories, it starts merrily into updating. Then after a few files it his this one:
libqt4-devel-doc-data
98MB. It downloads all the way to 99% and then the transfer rate drops from the 120KB/s I expect to 8B/s for a minute or so nad then it just restarts from 0%. It will do this a few times before offering the opportunity to skip. I did skip and it did a few more files successfully then hung up in the same way. It seems like any file larger than 1MB will not download.
View 3 Replies
View Related
Sep 4, 2010
My GUI seems to be stuck in some sort of debug mode. If a battery or network notification pops up in the upper right hand corner of my screen...there are lines thru the popup (sort of looks like nine slicing), and what looks like a debug message...."<urgencyLevel> - report incorrect urgency?". I'm not sure what might have been done in the system to turn these on....I know they weren't always there.
View 3 Replies
View Related
Mar 18, 2010
I've installed amarok from epel, however the xine-lib in epel does not support MP3 playback. The one in RPMForge does, and I found several instructions that one needs to add both the epel- and rpmforge-repositories to make it work. However when I add both installation failes due to unresolved dependencies. Apparantly epel's amarok does not support rpmforge's xine-lib anymore and insists on installing its own xine-lib
View 5 Replies
View Related
Jul 31, 2010
I have MP3 files and CUE files. I've tried unsuccessfully to burn a traditional audio CD from them using Brasero (burn image file, point to CUE, it acts like it will, then gives errors). I've searched all over Google and the Ubuntu Forums.
View 1 Replies
View Related
May 30, 2011
I have an external hard drive with most of my music on either mp3s or ripped from cds. I have imported the folders into gmusicbrowser but it doesn't show up some of the files. I have also tried rhythmbox and banshee media player but they all have the same problem. The files play fine on my other pc runnin xp pro so they are fine. Also some folders have nothing in under ubuntu but have mp3 files in (as they should) under xp.
View 9 Replies
View Related
May 17, 2010
For the last few releases, I've remained with Amarok 1.4, but now that I've deemed Amarok 2 stable enough, I've upgrade, however, the lyrics to my songs (which I put in a lot of effort in downloading), are not reflecting. Is there anyway to export lyrics from Amarok 1.4 and import them in Amarok 2?
View 1 Replies
View Related
May 16, 2010
I've installed kubuntu 10.04 recently. I'm following the guide at [URL] to set-up the system. I've installed the kubuntu-restricted-extras package however I do not get any sound while playing mp3s. The sound system is working as I get the kde tune when I start up. I have tried playing mp3s in amarok, audacious, kaffeine and vlc. None of them work.
I opened system settings -> multimedia. It shows four devices and only the one which says 'ALC883(analog)' works in all categories (notifications, music, video, etc etc) when I click test. However sometimes I get a notification saying that the device doesn't work.
Another thing I noticed was that the mp3s play when Dolphin shows a preview of the file when it is selected. I mean that there is a preview part in the right hand part of the window. When I press play there, the mp3s play. But there is no sound when I play movies and mp3s in amarok, audacious, vlc or kaffeine
The motherboard I'm using is Gigabyte M61PME-S2P. Its an nForce 430 motherboard with integrated graphics and sound.
View 5 Replies
View Related
Jan 16, 2010
I have kid3 for tagging MP3s and I really like it, however I would like to be able to specify an mp3 of a song I recorded and have it tag every field except for artist and title with my personal website for promotional purposes. I have a small amount of experience with python scripting, how I could get kid3 to automate this tagging.
View 3 Replies
View Related
Mar 26, 2010
I am using a Dell and Amaork won't play mp3s or anything for that matter. Using v 2.2.0 - Mplayer and others play fine.
or
Do you know of a like media player other than Rythembox or Banshee?
View 3 Replies
View Related
May 8, 2010
some reason it seems like the lowest it goes is ~64kbps (~ implying variable bitrate).So yeah, any thing that'll let me do the compression limbo better? (How low can you go? ) A different program? Unlock bonus stage? What
View 5 Replies
View Related
Jun 25, 2010
I used the script mentioned here [URL] to convert some wma files to mp3 however rhythmbox will not import these. Is this to do with the way they were conveted? Is there a better way or will converting wma to mp3 always result in this? Was going to try soundconverter but I wasn't sure if this would just do the same thing.
View 7 Replies
View Related
Apr 26, 2011
For some reason, I seem to be getting audio glitches or hick ups when I play my mp3s on Ubuntu 10.10. Everything else works fine. Would this be a hardware or software issue?
View 1 Replies
View Related
May 11, 2010
I just noticed that after upgrading to 10.04 Lucid Desktop, nautilus no longer plays MP3 files on mouse-over. It does recognize the file as a music file as it displays the music note icon in the comic balloon next to the music note file icon when the mouse is positioned over an MP3 file, however no sound is played.If I double-click the MP3 file, totem is invoked and plays the MP3 file just fine.
View 2 Replies
View Related
Nov 17, 2010
I foolishly did some editing to tracks on my Macbook. I didn't know that the changes are not apllied to the actual MP3s. So what I had wanted to do was to take the songs and copy them back to my desktop. But the edited tags don't move with them. Anyway to move song plus tags?
View 2 Replies
View Related
Dec 21, 2009
I install OpenSuse 11.2 +Non oss addon but I can't play anything such MP3s or videos and I can't config Pulse Audio to setup 5.1 channel on creative audigy value. what can I do?
View 2 Replies
View Related
Nov 19, 2010
I recently installed ubuntu and installed amarok and tuxguitar, both of them have no sound. Amarock just skips all the mp3s i want to play, and tuxguitar just plays without any sound, no error message or anything. I ran these both ot of the applications menu, not terminal (I dont know how to run them out of terminal).
View 5 Replies
View Related
Jan 29, 2010
This is just an idea, and I want to know if it can be done. Could I set up Nautilus so that videos and songs have their durations shown in the filename? For example, let's say I have a video of me shooting targets. There would be an icon, and the filename underneath would say: "Range trip 2009.flv - 8:23"
Is there currently a way to do this?
View 1 Replies
View Related
Apr 16, 2010
play the live feed on this site with smplayer? [URL]
View 7 Replies
View Related
Feb 13, 2011
I've got an Antec Fusion V2 chassis with a built in ir receiver.I've setup lirc on my system, and I can get irrecord to see my remote input and build a config file.I cannot get irw to work, and subsequently no activity on my HTPC.I'm running XBMC Live Further Reading:I've asked two questions on the Live community forum, however it's a slow process and the helpful responses have only taken me so far. These threads include some debug logs and troubleshooting steps.Question 1Question 2I'm wondering if this is something really basic that might simply be missing. The biggest problem here is that Linux changes so fast that information that was valid a year ago is completely obsolete now.
View 1 Replies
View Related
Aug 24, 2011
im needing to view a adobe flash crash report, or preferably watch the crash happen(in the code)
Ubuntu 11.04(up to date)
flash plugin - v11,0,1,98
flash aid - adobe beta, from adobe labs
Firefox - 6.0(according to the "about firefox")
i have installed and reinstalled both the flash player and flash aid is there a way to do this and how?the player works on some sites and not others is it possible that im up to date and there not?
View 5 Replies
View Related
Apr 16, 2011
Because I am unable to get "report-bug" to run without crashing, I would like to report a bug in "lxterminal" on Debian 6.0 (Squeeze) running the 486 kernel.When the lxterminal Preferences are changed, they are not saved afterwards (once the application is exited.) I have to change the font size each time, as the default lxterminal screen opens up too small to read.
View 8 Replies
View Related
Jul 5, 2011
I recently ran the update manager on my Ubuntu 11.04 box then shutdown and went to bed. When I booted the pc back up the next day my resolution is stuck at 1024x768 when I normally run at 1366x768.
I'm using the default open source drivers since the AMD ones are useless with my hardware (specs in the signature) I've tried changing the resolution through the "monitors" GUI and directly through xrandr.
xrandr output:
Code:
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
[Code]...
View 9 Replies
View Related
Jul 29, 2010
I spent hours and hours digging through this thread, and other random ones, where everything succeeds. I have an onboard Intel ICH6. Its details are located at: http://alsa-project.org/main/index.p...x:Vendor-Intel (btw, the part of about going and finding your chipset from a dropdown and the green text is a broken link. I think it should point here, instead: http://alsa-project.org/main/index.php/Matrix:Main).
My resolution ended up being, in the sound preferences, to change the Connector under Output from "Analog Output/Amplifier" to "Analog Mono Output/Amplifier" (No Amplifier works too).
I didn't find this advice anywhere. I was going to give up, and was poking around, and saw the mono options. Since onboard speakers are mono, I gave these choices a try. So, hopefully, this helps someone else. I appreciate this sticky; maybe there should be some information about how to find the appropriate sound settings in the guide ... somewhere in the beginning, around where you should check that your volume is up and your mute is off
This is a quote from sound solutions thread. i had this problem too with ICH6 but now that i have sound i have a new issue. While a normal sound range is 0-100% my sound range is about 0-10% meaning that about if i put my volume on 3% it it as loud as about 30% should be normally.
View 4 Replies
View Related
May 6, 2010
I have a Asus EEE PC 1005P which I installed a Command-line system on using the Alternate Installer CD of Ubuntu Lucid Lynx. I do not have (or want) the X Window System installed.
I want to change my console screen resolution (not inside X) to 1024x600. But it isn't reported when I use vbeinfo inside grub2:
Code:
grub> vbeinfo
VBE info: version: 3.0 OEM software rev: 1.0
total memory: 8128 KiB
List of compatible video modes:
[code]....
View 5 Replies
View Related
Mar 25, 2011
I know there are a lot of threads out there for same or similar issues, but nothing I found was working for me until, by sheer chance, I found this very simple solution on the Fedora forums. Too elegant not to share.Environment:Ubuntu 10.10nVidia GeForce 5500Samsung SyncMaster 225BWUsing DVI cable (in case it matters)Issue:After installing the proprietary nVidia drivers, the screen resolution was no longer the correct native resolution of the display. In my case specifically, the nVidia X Server Settings utility was detecting the maximum supported screen resolution was 1280x1024 while my display's native resolution is 1680x1050.Solution:Open a Terminal window.Make a backup copy of the original xorg.conf file. This is just good form any time you are making config file customizations.
Code:
sudo cp -p /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
Open 'xorg.conf' in a text editor.
[code]....
View 1 Replies
View Related
Aug 23, 2010
how-to compile from source; based on this post [URL]with some new hints and modified patches. This works on Ubuntu (Gnome version) without the official repository version of Amarok installed.
INSTALL DEPENDENCIES
Code:
sudo apt-get install libgpod-common libgpod-dev libgpod4 kdelibs4-dev libxine-dev libdbus-qt-1-dev libtag1-dev libsqlite3-dev libtunepimp-dev libmysqlclient15-dev libpq-dev libvisual-0.4-dev libsdl1.2-dev libifp-dev libxine1 libxine1-ffmpeg build-essential checkinstall ruby ruby-dev libruby libltdl-dev
[code]...
Quote:
under Amarok - Configure Amarok - Appareance - Download theme, then search for 3Dintegrity
View 9 Replies
View Related
Aug 25, 2010
Amarok's gone silent on me. It used to work fine until recently, even though I haven't done anything I can think of to change this apart from routine software updates.It is only happening to me.Other users on the machine are OK.I can play sound from other applications including Kaffeine, Skype and Audacious. The problem occurs with all file types I have tried, namely mp3 ogg and mpc.
Amarok looks like it's playing when I click play, in that the playback process bar is working and the time elapsed is displayed. Amarok appears as a client in the PulseAudio manager. The only thing I can see that might be odd, apart from the silence, is the big button near the top, level with and the same size as the play/pause button. I can't remember what this button is for. The symbol on it looks odd, as if an animated symbol for volume adjustment got caught on one particular frame. Clicking on this button does nothing either visually or functionally
View 1 Replies
View Related
Sep 5, 2010
i set up an ubuntu image in virtualbox.
everything works fine exept amarok.
i doesnt play any sound at all. i tried the gstreamer and the xine phonon...
vlc works flawless.
banshee though also doesnt play anything.
View 2 Replies
View Related
