I would like to play the MP3 files that are stored on my Linkstation NAS through Amarok but I can't get Amarok to play them. The only way I can get the files to play is through Dolphin or to copy them to my local drive and play them from there.
Does anyone know how I can get the files to play through Amarok? I thought it would be easy seeing as I can play movie files from the NAS using Dragon Player and edit photos stored on the NAS using GIMP. Why won't Amarok play ball?
Some (very few) mp3 files on my hard drive seem to self-report incorrect (much too long) lengths to audio players. I mostly use Amarok, but I've verified that the problem also occurs with other audio players. The files play just fine, but it's annoying that they're listed with incorrect length. Most of my mp3s are encoded using VBR, but I can't imagine that that's a problem ... and if it were, it would be occurring with a lot more files, I'd think.I'm guessing there's a problem with the file header itself on these files. Is there some way I can check this and correct it, if that is the problem? A quick check through Synaptic didn't turn anything useful-looking up, and neither did a search through these forums.
I'm running Ubuntu 9.10 on an HP Pavilion dv 6000 with a Centrino Duo processor and 2GB of RAM. I have the Universe, Multiverse, and Medibuntu repositories enabled.
I've installed Opensuse 11.4 and even have the multiboot working (at last) and firefox running at more than a snails pace, but this latest problem is really stumping me. I suspect it might be a little more fundamental than just amarok and mp3's but that's where I see it.
So, when I run amarok it asks if I would like to install MP3 support So I click on affermative and, since I added the neccessary repositories, it starts merrily into updating. Then after a few files it his this one:
libqt4-devel-doc-data
98MB. It downloads all the way to 99% and then the transfer rate drops from the 120KB/s I expect to 8B/s for a minute or so nad then it just restarts from 0%. It will do this a few times before offering the opportunity to skip. I did skip and it did a few more files successfully then hung up in the same way. It seems like any file larger than 1MB will not download.
I've installed amarok from epel, however the xine-lib in epel does not support MP3 playback. The one in RPMForge does, and I found several instructions that one needs to add both the epel- and rpmforge-repositories to make it work. However when I add both installation failes due to unresolved dependencies. Apparantly epel's amarok does not support rpmforge's xine-lib anymore and insists on installing its own xine-lib
I have MP3 files and CUE files. I've tried unsuccessfully to burn a traditional audio CD from them using Brasero (burn image file, point to CUE, it acts like it will, then gives errors). I've searched all over Google and the Ubuntu Forums.
I have an external hard drive with most of my music on either mp3s or ripped from cds. I have imported the folders into gmusicbrowser but it doesn't show up some of the files. I have also tried rhythmbox and banshee media player but they all have the same problem. The files play fine on my other pc runnin xp pro so they are fine. Also some folders have nothing in under ubuntu but have mp3 files in (as they should) under xp.
For the last few releases, I've remained with Amarok 1.4, but now that I've deemed Amarok 2 stable enough, I've upgrade, however, the lyrics to my songs (which I put in a lot of effort in downloading), are not reflecting. Is there anyway to export lyrics from Amarok 1.4 and import them in Amarok 2?
I've installed kubuntu 10.04 recently. I'm following the guide at [URL] to set-up the system. I've installed the kubuntu-restricted-extras package however I do not get any sound while playing mp3s. The sound system is working as I get the kde tune when I start up. I have tried playing mp3s in amarok, audacious, kaffeine and vlc. None of them work.
I opened system settings -> multimedia. It shows four devices and only the one which says 'ALC883(analog)' works in all categories (notifications, music, video, etc etc) when I click test. However sometimes I get a notification saying that the device doesn't work.
Another thing I noticed was that the mp3s play when Dolphin shows a preview of the file when it is selected. I mean that there is a preview part in the right hand part of the window. When I press play there, the mp3s play. But there is no sound when I play movies and mp3s in amarok, audacious, vlc or kaffeine
The motherboard I'm using is Gigabyte M61PME-S2P. Its an nForce 430 motherboard with integrated graphics and sound.
I have kid3 for tagging MP3s and I really like it, however I would like to be able to specify an mp3 of a song I recorded and have it tag every field except for artist and title with my personal website for promotional purposes. I have a small amount of experience with python scripting, how I could get kid3 to automate this tagging.
some reason it seems like the lowest it goes is ~64kbps (~ implying variable bitrate).So yeah, any thing that'll let me do the compression limbo better? (How low can you go? ) A different program? Unlock bonus stage? What
I used the script mentioned here [URL] to convert some wma files to mp3 however rhythmbox will not import these. Is this to do with the way they were conveted? Is there a better way or will converting wma to mp3 always result in this? Was going to try soundconverter but I wasn't sure if this would just do the same thing.
For some reason, I seem to be getting audio glitches or hick ups when I play my mp3s on Ubuntu 10.10. Everything else works fine. Would this be a hardware or software issue?
I just noticed that after upgrading to 10.04 Lucid Desktop, nautilus no longer plays MP3 files on mouse-over. It does recognize the file as a music file as it displays the music note icon in the comic balloon next to the music note file icon when the mouse is positioned over an MP3 file, however no sound is played.If I double-click the MP3 file, totem is invoked and plays the MP3 file just fine.
I foolishly did some editing to tracks on my Macbook. I didn't know that the changes are not apllied to the actual MP3s. So what I had wanted to do was to take the songs and copy them back to my desktop. But the edited tags don't move with them. Anyway to move song plus tags?
I install OpenSuse 11.2 +Non oss addon but I can't play anything such MP3s or videos and I can't config Pulse Audio to setup 5.1 channel on creative audigy value. what can I do?
I recently installed ubuntu and installed amarok and tuxguitar, both of them have no sound. Amarock just skips all the mp3s i want to play, and tuxguitar just plays without any sound, no error message or anything. I ran these both ot of the applications menu, not terminal (I dont know how to run them out of terminal).
how-to compile from source; based on this post [URL]with some new hints and modified patches. This works on Ubuntu (Gnome version) without the official repository version of Amarok installed.
Amarok's gone silent on me. It used to work fine until recently, even though I haven't done anything I can think of to change this apart from routine software updates.It is only happening to me.Other users on the machine are OK.I can play sound from other applications including Kaffeine, Skype and Audacious. The problem occurs with all file types I have tried, namely mp3 ogg and mpc.
Amarok looks like it's playing when I click play, in that the playback process bar is working and the time elapsed is displayed. Amarok appears as a client in the PulseAudio manager. The only thing I can see that might be odd, apart from the silence, is the big button near the top, level with and the same size as the play/pause button. I can't remember what this button is for. The symbol on it looks odd, as if an animated symbol for volume adjustment got caught on one particular frame. Clicking on this button does nothing either visually or functionally
How can I install Amarok 2.3.2 (recent version) in Ubuntu? I downloaded the source file and looked at the README file. It says I need to have some dependencies before installing. But since Amarok is for KDE, it would be frustrating to get all the dependencies correctly in Gnome. Or is there another way to do it?
I just made the switch back to Ubuntu from Kubuntu. Now I'm having problems running my favourite KDE app, that's Amarok.
Amarok regularly scans my collection, no problems with that. When I try and play any tracks they're not playing and Amarok scrolls through the playlist without playing anything. No error messages are displayed either (although I remember once I got some message related to phonon).
I am using Ubuntu 9.10 and having trouble with Amarok. It crashes on on startup. I have read that the issue is not with Amarok but rather phonon. Is there a solution? Application: Amarok (amarok), signal: Segmentation fault [Current thread is 1 (Thread 0xb68cb950 (LWP 13047))]
Thread 5 (Thread 0xb527bb70 (LWP 13054)): #0 0x003e9422 in __kernel_vsyscall () #1 0x07fcb142 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib/tls/i686/cmov/libpthread.so.0 #2 0x037168d4 in pthread_cond_timedwait () from /lib/tls/i686/cmov/libc.so.6 #3 0x075519ff in ?? () from /usr/lib/libxine.so.1
For example, an mp3 file has all the tags filled - track number, year, genre, etc. But when in Amarok, some tags are not shown to me.Look at the attached screenshot, please. You see, when I look into track properties I can see that it HAS got a track number and a year. But it is not shown in playlist.
my friends with taste in good music players! Amarok 1.4 has a new fork called Pana! Homepage: [URL]..Current build with visualization support (which is not enabled in the build from the PPA). [URL]..please also install these packages:
If I run Amarok right after ubuntu starts, and then start a movie, there is no sound. It doesn't matter that the playback in Amarok is paused, stopped or active, there is no sound in the other player. Even if i exit Amarok, i don't get any sound. It is important to note that the other player is definitely a gnome application. I tried playing a song in Rhythmbox after Amarok was started, or play a video in Movie Player: no sound. I get sound from KDE video players, but the video doesn't work there, so that isn't an option. The only explanation i can think of, is that Amarok somehow "occupies" the sound drive, and it remains "occupied" even after the application was closed. Because if i start Movie Player before Amarok, this problem never appears.
I have installed Amarok on clean Ubuntu 9.10 and when I tried to play some mp3 files it just skip them all and finish the play list. I don't know how to fix this, maybe I need something to be installed. On other programs the files works fine. I have some Intel efault sound card.
I've been a Ubuntu user for the last 7 days and just switched from Vista.I've been loving it so far except for this tiny problem. Amarok does not play media files at all.The pre-installed Rhythmbox with 10.04 works great.In Amarok,it isn't that I don't get sound. It just won't play. If I click a file, then click play it quickly goes through an amount of songs and then it tries to play all the songs in the playlist unsuccessfully. I'm using Ubuntu 10.04 Lucid Lynx and Amarok 2.3.0(KDE 4.4.2) in a 32 bit system.
