Ubuntu Multimedia :: Unable To Set Console Resolution - Vbeinfo In Grub2 Doesn't Report All Resolutions
May 6, 2010
I have a Asus EEE PC 1005P which I installed a Command-line system on using the Alternate Installer CD of Ubuntu Lucid Lynx. I do not have (or want) the X Window System installed.
I want to change my console screen resolution (not inside X) to 1024x600. But it isn't reported when I use vbeinfo inside grub2:
Code:
grub> vbeinfo
VBE info: version: 3.0 OEM software rev: 1.0
total memory: 8128 KiB
List of compatible video modes:
[code]....
View 5 Replies
ADVERTISEMENT
May 6, 2010
I have a Asus EEE PC 1005P which I installed a Command-line system on using the Alternate Installer CD of Ubuntu Lucid Lynx. Altough I think this is a general linux and grub2 question. I do not have (or want) the X Window System installed. I want to change my console screen resolution (not inside X) to 1024x600. But it isn't reported when I use vbeinfo inside grub:
grub> vbeinfo
VBE info: version: 3.0 OEM software rev: 1.0
total memory: 8128 KiB
List of compatible video modes:
Legend: P=Packed pixel, D=Direct color, mask/pos=R/G/B/reserved
0x112: 640 x 480 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24
[Code]...
Does it mean I have the driver? how to set it to 1024 x 600 in grub2?
View 1 Replies
View Related
Feb 12, 2011
I'm trying to use GRUB2 in graphical mode with 1440x900 resolution, but the result is always garbled nonsense: the highest resolution I can get is 1280x800.
Word is from googling that long as vbeinfo lists a resolution, GRUB2 can use it. This doesn't seem to be true: vbeinfo says that 1440x900 is available but it doesn't work.
Testing it from the GRUB2 command line:
set gxfmode=1440x900
terminal_output gfxterm
# -> garbled nonsense
# back to trusty 640x480
terminal_output console
[Code]....
View 1 Replies
View Related
Feb 13, 2011
I've got an Antec Fusion V2 chassis with a built in ir receiver.I've setup lirc on my system, and I can get irrecord to see my remote input and build a config file.I cannot get irw to work, and subsequently no activity on my HTPC.I'm running XBMC Live Further Reading:I've asked two questions on the Live community forum, however it's a slow process and the helpful responses have only taken me so far. These threads include some debug logs and troubleshooting steps.Question 1Question 2I'm wondering if this is something really basic that might simply be missing. The biggest problem here is that Linux changes so fast that information that was valid a year ago is completely obsolete now.
View 1 Replies
View Related
Apr 16, 2011
Because I am unable to get "report-bug" to run without crashing, I would like to report a bug in "lxterminal" on Debian 6.0 (Squeeze) running the 486 kernel.When the lxterminal Preferences are changed, they are not saved afterwards (once the application is exited.) I have to change the font size each time, as the default lxterminal screen opens up too small to read.
View 8 Replies
View Related
Jun 26, 2011
I'm using the 270.41.19 nvidia properietary driver for my Geforce GTX460 graphics card. I have a Sony TV connected to my HDMI and I know it supports the 1920x1080 resolution. Yes it works after gnome or other DE loads up.
But during the GRUB screen and the bootup console - It defaulted to a 640x480 resolution (as it always does with the nvidia prop driver). I usually used to check the output of hwinfo --framebuffer and choose the resolution by appending the right vga=0xabc parameter.
But now I have a problem since hwinfo says the best widescreen 16:10 framebuffer resolution that my card supports is 1280x800. Here is the output from hwinfo --vbe which should give the info about both my gfx card and my TV.
The initial nouveau driver was able to output native 1920x1080 during the bootup on the console without issues, so I guess even the properietary driver should be able to output (If my understanding is right the nvidia module loads later during the bootup and only is required for the X but not for the console itself).
[Code]...
View 3 Replies
View Related
Aug 22, 2011
Just as the title says: I installed iceweasel 6 in debian squeeze (via mozilla.debian.net) and while errors and requests are captured in the web console, I simply cannot use it to evaluate arbitrary javascript I type in it.
Does anyone have this problem as well? It's been like this since v5 as well. I already tried purging and reinstalling, as well as running with another profile.
View 1 Replies
View Related
Jan 26, 2010
not sure exactly when this broke, but for some reason I'm not able to use CTRL-ALT-F1 anymore to fall back to the first virtual console.I can kill X with CTRL-ALT-BACKSPACE just fine, but I'd like to be able to get a normal shell to kill things when I've messed too much with graphical stuff.
View 4 Replies
View Related
Dec 14, 2010
i just upgraded to the latest nvidia 8 series driver, i downloaded from the nvidia site. After i installed the driver, i reboot and it booted into the console login screen with no GUI. how do i get back into the GUI.
View 1 Replies
View Related
Jan 24, 2011
first time poster after having read gobs of threads trying to find the answer to my issue here. I'll try to post as much information as I can, and then will supply whatever else is inevitably left out and deemed necessary. I'm running 10.10 on a Gateway MX3701 laptop which has an ATI Radeon Xpress 200M graphics controller (lspci | grep VGA) and am hooking it up to my Samsung P2770HD monitor/TV via VGA (VGA-0 port if that's important).
So, the issue: In resurrecting my old laptop by killing XP and putting on Ubuntu, I found I needed a VGA cable to connect to my monitor. Borrowed a friend's to get my setup going, and all was well in 1920x1080 with all the other monitor settings working well too (laptop monitor off, etc.. When my new VGA cable (cheap from Amazon) arrived and I shutdown, made new connection, and rebooted, my monitor was no longer recognized (it was before) and I am limited to weak sauce resolutions meant for my blinding grandmother.
So I've tried to find similar issues on here and have struggled to do so. I did find one thread that was similar, but the issue was never resolved.
View 2 Replies
View Related
Jun 11, 2010
Ubuntu 10.04, nVidia GeForce 9400, driver ver 195.36.15.When I log in, the system always comes up in 800x600 mode. I went into the NVIDIA X Server Settings page and changed it to my preferred setting of 1152x864. I hit Apply, then Save to X Configuration File (with correct root password).All is well until restarting. Then it reverts back. The update doesn't stick. How can I make this the permenant setting?
View 3 Replies
View Related
Jul 16, 2010
I just switched monitors to a Viewsonic VX2025 and I am unable to get beyond 1280 x 1024 using the nvidia x server settings. My graphics card is a GeForce 5200. These are connected with a DVI plug. I would like to be able to set my resolution to 1920 x 1080. (Also, the card and monitor worked at 1920 x 1080 in a previous windows machine.)
I have done a fair bit of searching and it appears that my issue is either the x configuration file or EDID. After 2 days of working with this it's gotten confusing to say the least. So, I'm looking to see if others have had a similar problem and how to solve it. I have not altered an x config file before, so not exactly sure of where to begin.
View 3 Replies
View Related
Jun 20, 2010
Ubuntu 8.04 used to detect my display resolutions fine, but this version is unable to detect my max. resolution and I get lock-ups when I use the live disk without the "nomodeset" option.
My display config is:
lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Detected resolutions (with nomodeset option):
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 2048 x 2048
VGA connected 1024x768+0+0 (normal left inverted right x axis y axis) 267mm x 200mm
800x600 85.1 + 85.1 72.2 75.0 60.3 56.2
1024x768 60.0*
832x624 74.6
640x480 85.0 75.0 72.8 75.0 59.9
720x400 85.0 70.1
640x400 85.1
640x350 85.1
The resolution 1152x864 is missed. This was a bug I had earlier reported on Intrepid (9.04).
My OS:
Linux ubuntu 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686 GNU/Linux
I downloaded this 2 days ago. Also I was stumped at no kernel messages on any virtual terminal! How can I enable the printks?
View 1 Replies
View Related
Jan 29, 2011
I am using a 15" CRT Samsung monitor and when I upgraded 10.10, the screen resolution became 800x600 and I am not able to increase the resolution of it. This was working fine with 10.04 version.
Below is the o/p for "xrandr":
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 800 x 600, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
800x600 0.0*
I also see a continuous message box at the top left corner of my monitor with text as "Unknown".
View 7 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
Mar 25, 2010
I run a number of Ubuntu 9.10 boxes attached to multiple daisy-chained KVMs. None of the PCs are using any GUIs - they all run in console mode. I often reboot them remotely via an SSH session, etc. If a monitor isn't actually active on the PC when it reboots, Grub2 uses a low-res video mode, despite having a higher-res video mode set correctly in Grub2's configuration. If I reboot WHILE THE MONITOR is attached to the Ubuntu PC via the KVM, the video mode is set correctly as configured in Grub2's config files. If I reboot WITH NO MONITOR attached, the video mode is ignored and I'm stuck in a low-res mode next time I attach to the PC via the KVM. How can I force Grub2 to honor the configured graphics setting, despite not having a monitor present at the time it boots?
View 1 Replies
View Related
Feb 1, 2011
Is this a beta version or something? I installed this version because it came as a live cd coupled with emc2 for cnc machining. I cannot get anything to work correctly. I tried to install Mozilla thunderbird using the application manager and it is very slow. It takes forever for the menus to open. or emails and is virtually unusable. I tried to use the startup manager and it killed my grub bootloader so I needed to reinstall. I couldnt successfully use the grub2 console prompt to log back into linux even though I ollwed several tutorials for this. I tried to install the flash player plugin and it kept telling me still to install it before I could watch flash videos even though I had installed it 3 or 4 times. I just tried to install evolution mail and it cannot log into my gmail account. I tried to install swift dove which is a faster version of thunderbird and it says it is starting but then never does. I am reasonably sure I should hang in there as I have heard Ubuntu is very good as an os.
View 9 Replies
View Related
Mar 6, 2011
I'm currently using ubuntu 10.04 version. I've recently purchased a BenQ E2200HD monitor. However, the monitor is unable to configure a resolution higher than 800x600. I've tried changing it via 'preferences' - 'monitor' etc. The monitor model is 'unknown'. and the highest resolution available is the 800x600.
I've tried changing it manually, but it says x.cong file does not exist. Xrandr doesnt seem to work either. Or i would get CTRC 262. My current set up is, intel i5 2600, 4GB Ram, Nvidia GTS 240. I'm pretty certain, my graphics card (despite being in the low end) can support HD resolution. Even if it can't, it surely can support a resolution higher than 800x600.
View 7 Replies
View Related
Jul 20, 2010
I have been running Ubuntu 10.04 on my laptop just about since it came out.Prior to that I was running 9.10 on the same laptop. I was so happy with 9.10 I thought I could only be happier with 10.04.I was wrong.There are some things about 9.10 that I have *lost* in the transition to 10.04.These bother me quite a bit so much so that I have repeatedly considered going back to 9.10.Please keep in mind this all worked fine under 9.10 on exactly the same hardware.
1) When I connect the external VGA port on my laptop to my 32 Samsung TV it comes up as a 40 Samsung TV and it is impossible to set the correct resolution.This makes watching TV over the Internet via my notebook impossible (I used to use URL... and others).
2) I cannot change the resolution on the console (the TTY's 1 to 6). It used to come up as standard old fashioned VGA (80 columns by 25 rows of text) but now it is much smaller font and much larger console.The VGA= in GRUB does nothing. And this is the only suggestion I seem to be able to find. From my reading most people seem to like the large console w/ small font.I dislike it for the reason I will get into next
3) DOSEMU locks up my computer with a blank screen when running in super mode on the console.Pressing Ctrl+Alt+F# accomplishes nothing and either does Ctrl+Alt+Del.I have to press and hold the power button forcing a hard shutdown (at least this is the only solution I have found).
View 3 Replies
View Related
Apr 12, 2010
I am running Ubuntu 9.10 on an HP laptop with an Intel 82852/82855 GM/GMC Graphics controller. I have a 2nd monitor attached to the VGA port (HP f1703). The problem is that the two screens have different resolutions. the laptop is 1280 x 768 and the other monitor is 1280 x 1024. The xorg.conf file that was created with Xorg -config set both monitors up with 1280 x 1024 resolution so my screen on the laptop looks all "squashed". I have tried to reconfigure it using the Display Preferences dialog but after i re-boot, both screens are unviewable and I have to restore my previous xorg.conf file. I went through the HOWTO: Jaunty Intel Graphics Performance Guide procedure to setup a "safe" configuration but didn't work and I had to restore my "good' xorg.conf file. What do I need to do to setup my two screens with the correct resolutions: 1280 x 768 and 1280 x 1024?
Here is the video portion from my "good" xorg.conf file
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
[Code]...
View 1 Replies
View Related
Aug 2, 2010
Unable to get high res, colour or 3-D acceleration working with 8.04 Hardy. Not a hardware problem as it works perfectly in dual-boot XP.
[Code]...
View 6 Replies
View Related
Mar 4, 2010
Let's start with some context: About a week ago, I saw in the university computer that the text mode consoles(ctrl+alt+f[n]) worked with a great resolution on a 19" wide screen (I think it is 1440x900) running fedora 11. So I wondered if I could make the text consoles at home to work with a good resolution also.So I started to search for that and found the kernel parameter vga= . The problem: it doesn't support 1440x900 or any other 16:10 resolution for my graphic card. Then I thought that maybe fedora uses some module that allows that, because the livecd allows a good resolution (by default) on my desktop computer.
What I thought so far is that fedora is not using vesa for the virtual console (which i think is the driver that ubuntu uses) and I want to know what driver it is and how to use it in ubuntu (either compiling the kernel or simply installing something).I don't even know if my guesses are right or not. But I've gathered some info so far:From /var/log/messages (fedora 12 livecd) I got this part, which I think is the really interesting one.Quote:
Mar 2 22:37:18 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Mar 2 22:37:18 localhost kernel: [drm] radeon defaulting to kernel modesetting.
Mar 2 22:37:18 localhost kernel: [drm] radeon kernel modesetting enabled.
[code]...
View 2 Replies
View Related
Aug 7, 2010
I debootstrapped an install into an existing lvm and booted into it and everything is working great except that after initrd hands off to boot the real root, the text font changes and the resolution is unsupported by my old monitor. The box is up and running because I can ssh in. This is more of an annoyance than anything as I only use the console when something is broken, but it does need to be resolved.
I used dpkg-reconfigure console-setup as described in the debootstrap config guide but I don't see an option for changing the "vga" statement before it regenerates the initrd.
View 2 Replies
View Related
Apr 1, 2010
After an update on squeeze about a week or two ago, my console font turned green. I'm not exactly sure of the timing, because I switch between lenny and squeeze, and some time passed between the update and the reboot in squeeze.
During the update, I was asked if I wanted to keep my altered /etc/grub.d/00_header or take the package maintainer's version. I took the PM's version, knowing I'd lose my edit (set gfxpayload=1024x768x16). When I add that line to the new 00_header, run update-grub and reboot, the console font is the size I want, but it's a dull green. Reminds me of my first computer. How do I get it back to white and keep the 1024x768 resolution?
Currently booting with grub-legacy and chainloading grub2. If I boot entirely with grub-legacy, and pass vga=791, the console font will be white. It doesn't matter which kernel I use. Currently, I'm running 2.6.32-3-686. Same behavior exists if I use 2.6.30-2-686. If I use 1024x768x8 I get a dull gray instead of dull green.
View 4 Replies
View Related
Feb 14, 2010
When I boot up, Grub flashes a message along the lines of "vga=7xx is deprecated, use setting y instead,". Where would grub2 log this error, and what file would I have to edit to change from the old to new resolution setting?
View 1 Replies
View Related
Mar 6, 2010
How I can get Chainload into Grub2 to show up as an entry in Grub, I just installed Karmic a week ago on my laptop. I want to set Grub to use this theme. I'm using a netbook, how would I change grub's resolution to 1024x600.
View 8 Replies
View Related
Feb 8, 2010
I'm trying to add a higher resolution to my system. I've tried to edit xorg.conf but I think I'm wrong. Everytime I edit and reboot, it tells me I need to run in low graphics mode for now. Now I'm trying 'xrandr.' I was able to create a new mode just fine, but when I try to add it to the appropriate output, I get this:
Code:
prog@ubuntu:~$ xrandr --addmode LVDS1 1280x1024_50.00
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 149 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 25
Current serial number in output stream: 26
Here's what xrandr returns:
Code:
prog@ubuntu:~$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA1 disconnected (normal left inverted right x axis y axis)
LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 286mm x 214mm
1024x768 60.0*+ 50.0
800x600 60.3 56.2
640x480 59.9
TV1 disconnected (normal left inverted right x axis y axis)
1280x1024 (0x111) 109.0MHz
h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz
v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz
1280x1024_50.00 (0x112) 89.4MHz
h: width 1280 start 1352 end 1488 total 1696 skew 0 clock 52.7KHz
v: height 1024 start 1025 end 1028 total 1054 clock 50.0Hz
I don't know why it puts it in TV1. There's two of them because I tried two different refresh rates.
View 3 Replies
View Related
Apr 5, 2010
Linux Ubuntu 9.10 (karmic), Nvidia g-force 5200, Intel(R) Pentium(R) 4 CPU 2.80GHz(old PC but i need learn Linux inside out b4 I go 100% Linux)But I have taken the time to the learn the basic cmds like man mv cp apt-get install etc. I cisco engineer but I want to get good with Linux distro's.I have a NVIDIA G-FORCE 5200 which according to NVIDIA'S website the 173.14.x.x driver is the correct one.I have tried diver 173.14xx. I installed it manually and restarted x server.
I have read the installation guides on this forum but to no avail.When I reboot Compiz cube features are working BUT my screen goes 640x350.I tried to edit the /etc/X11/ xorg. conf file but I cant see any screen resolutions lines. I tried changing NV to nvidia and visa versa. Still the screen is buggered.I installed compiz checker and ran it it said all ok. My text goes large the colours are jittery ? When I go to NVIDIA XSERVER SETTINGS i can not change the screen res ? It just stops from selecting the options? I also tried driver 185.18xx and the same results.I also tried installing the drivers with Envy NG and still no better.I now have installed 96.43.13 NVIDIA driver and my screen has went back to normal but I can not enable the cube effects. I take this means it has reverted back to the graphics card on the motherboard? I have also looked at xrandr -s <1014x768> cmd to manually change it and again no avail.
View 3 Replies
View Related
Sep 1, 2010
I have a collection of *.mkv files which are 720 HD resolution (1920x720). I'd like to watch them on my netbook, but it can't handle HD content. The videos play fine on any decently-powerful desktop, under either Windows XP/7 or Ubuntu, but they are simply too much for the Atom CPU of the netbook.Is there a way to downconvert the .mkv files to something the netbook can handle? It doesn't have any problem with standard DVD content, which is of course lower resolution. Cutting HD content down to the netbook's native resolution(1024x600) would probably be sufficient.
A free software package available in the repositories would be great, but I have no problem manually installing something if necessary. I have not done any work with converting videos to different formats, so I don't know what's out there for Ubuntu.
View 9 Replies
View Related
Jan 21, 2010
I'm trying to track down a screen resolution issue (Karmic on an Acer SK20 [Intel 945 graphics] with Acer AL1511 flat panel via VGA) and mechanism for setting the framebuffer screen resolution after GRUB2 has loaded the kernel but before X starts.
Before I forced it to behave itself by adding an xorg.conf with a lone "Modes" entry for 1024x768, X was setting the panel to 640x350 by default. It appears from looking at get-edid | parse-edid that this is because 640x350 is the only resolution this idiot panel's EDID says it knows about, even though its native resolution is in fact 1024x768.
So the GUI works fine now, but all the text consoles (Ctrl-Alt-F1 through F6) are still operating at 640x350 and look terrible; also, because usplash doesn't know what to do with 640x350, I don't get my nice white Ubuntu logo before GDM starts.
In previous releases, I would have dealt with something like this by adding vga=791 to the kernel boot options. That doesn't work for the Karmic kernel, and GRUB2 whines about it being deprecated and tells me to use "set gfxpayload=1024x768x16,1024x768" on a line before the "linux" command instead.
Things I have already tried, with no success:
1. Adding "set gfxpayload=1024x768x16,1024x768" into the boot sequence, right before the "linux" line, by using GRUB2's inbuilt boot sequence editor (Ctrl-E): no change.
2. Changing the GRUB_GFXMODE= line in /etc/default/grub and running update-grub: changes the resolution used for GRUB's own menu, but as soon as the kernel boots it's back to 640x350 on text consoles.
3. Same as (2) but also adding a "set gfxpayload=keep" line in /etc/grub.d/00_header, right after the "set gfxmode=${GRUB_GFXMODE}" line: same effect as (2).
4. Removing the "splash" option from the "linux" line. No change (I guess this is because usplash didn't work anyway at 640x350). By the way, usplash.conf is set up for 1024x768 and yes, I did remember to dpkg-reconfigure -phigh usplash to rebuild the initramfs after checking this.
where exactly does Karmic set the screen resolution for its text consoles, and how can I force it to ignore this LCD panel's bogus EDID?
View 3 Replies
View Related
