Ubuntu Multimedia :: Make Elgato Eyetv Diversity Work In 9.10?
Mar 3, 2010In Kaffeine I can not press "Start scan" button, because it is disabled. The USB-ID of the DVB-T dual-tuner device is 0fd9:0011.
View 5 Replies
ADVERTISEMENT
Ubuntu Multimedia :: Elgato Eyetv Hybrid Not Being Detected?
Jan 17, 2010I installed mythbuntu 9.10 this week on some old hardware, I had a Hauppauge 500MCE PVR in and made it work fairly easy. I'm used to gentoo
However, I want to record HD signal, so I plugged in a Eyetv hybrid and followed this guide url.
I extracted the driver, put it in into /lib/firmware, modprobed em28xx, rebooted. When I plug in the device, it is not recognised. I tried both usb ports. The ID is "0fd9:0018", which is somewhat different from similar hardware e.g. Hauppauge wintv-hvr-950 (ID 2040:6513 url.
I think the hardware has been updated, hope someone knows how to crack this one
I have added some additional information below!
# uname -a
Quote:
Linux m 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux
# lsmod | egrep -R "video|em|video|v4l"
Quote:
em28xx 80968 0
ir_common 48512 1 em28xx
videobuf_vmalloc 6496 1 em28xx
videobuf_core 17952 2 em28xx,videobuf_vmalloc
v4l2_common 17500 6 em28xx,wm8775,tuner,cx25840,ivtv,cx2341x
code.....
Ubuntu Multimedia :: EyeTV For DTT (USB Stick) Not Working?
May 12, 2011I just bought a new USB DVB-T receiver: Elgato EyeTV for DTT.
In the following chart:url
it is listed as supported out of the box, which is not the case.
When I connect the stick, the only message I get is the following:
May 13 00:15:26 micasa kernel: [16969.930122] usb 2-2: new high speed USB device using ehci_hcd and address 4
So I guess I will need to mess up with patches, kernel modules, firmware files, etc.
Please, is anybody using this receiver or the Hauppauge WinTV-NOVA-T (which is said to be a clone)?
Ubuntu Multimedia :: Elgato / Lsusb Shows The Device But Don't Get A Vendor Name?
Jan 3, 2010I'm really trying to get the Elgato Eye TV Diversity working with Ubuntu (I'm trying it on both Karmic and Hardy)
The problem is, lsusb shows the device but I don't get a vendor name, just an ID.
dmesg shows a usb device being detected, but not that it's a TV tuner.
I've followed the guides on these pages:url
url
url
url
P.S (I know some of the guides are for the hauppauge nova, but this is the same device as far as I can tell)
Ubuntu Multimedia :: Y0400052 Remote With Eyetv Dtt Stick?
Jun 6, 2011im trying to use a Y0400052 remote control from my leadtek winfast analog tv receiver pci card with a elgato eyetv dtt dvb-t usb stick. i know theres plenty of 'how do i get my infrared remote controller working' infos out there but im kind of lost. feel free to direct me to an appropriate place. part of my confusion is that im both lost on a very general level AND on a very specific level. back in the days when i had a desktop and was using the leadtek pci card the remote was working ok via lirc. now it seems that there is this new way of handling remotes via devinput and 'events' so im unclear - do i need lirc anymore?
[Code]...
Ubuntu Multimedia :: Creative Webcam Doesn't Work - How To Make It Work
Feb 17, 2011how to make creative web cam working with ubuntu
View 1 Replies View RelatedUbuntu Multimedia :: Flash Controls Don't Work - How To Make Them Work
Apr 8, 2011I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
OpenSUSE Hardware :: Terratec T5 / Cinergy DT USB XS Diversity Remote Control
May 7, 2011First my system data:
- OpenSuse 11.4 x64
- KDE SC 4.6.2
- Terratec T5 / Cinergy DT USB XS Diversity -> linuxtv.org wiki
I have a this new USB DVB-T Stick and the tv reception works perfect. I tried to set up the remote control as well, but i got stuck. I followed this instruction.
excerpt from lsusb:
Code:
Code:
When I try to record the keys with the command
Code:
Irrecord does not recognize anything. This input device is also mapped to /dev/input/ir but this device doesn't work neither.
I also checked the remote cotrol with a digital camera: it sends ir light on pressing a key.
Ubuntu Multimedia :: Amarok & Ipod / Can't Seem To Make Two Work Together - Fix It?
Mar 11, 2010I cannot seem to make the two work together. I try to config Amarok and change the media devices, however, there is no option called "media devices."
View 3 Replies View RelatedUbuntu Multimedia :: How To Make Midi Maker Work
Mar 27, 2010I have a few things working now, so all I need to know is a good way to record the music you play from Virtual Keyboard. I've tried Audacity to do this, but it never works correctly.
View 6 Replies View RelatedUbuntu Multimedia :: Make The Hercules Console Work With 9.10?
Apr 10, 2010Is there any way to make the Hercules console work with Ubuntu 9.10?
View 3 Replies View RelatedUbuntu Multimedia :: Can't Get Sound On HDMI To Work / Make It Possible?
Mar 15, 2011I'm having problem to get my sound work on my HTPC based on Asus AT5IONT-I Deluxe motherboard. I can get analogue sound out but not the digital sound on HDMI nor optical. I have tried a couple of things I've found on swedish forums, but nothing have worked so I'm ready to start over again from the beginning. I'm a real beginner when it comes to Ubuntu so step by step instructions is preferred. code...
View 2 Replies View RelatedUbuntu Multimedia :: Make Mp3blaster Work In Maverick Meerkat?
Oct 15, 2010I just had the idea of going back to command line music players and mp3blaster is what that came to my mind. I am running Kubuntu 10.10 on a Thinkpad T43 laptop with the default kernel. In an archived thread I read
mp3blaster -s /dev/dsp
would do the trick. But since all sound devices in my current laptop seem to be listed under /dev/snd as pcmC0D0p etc. I tried using,
mp3blaster -s /dev/snd/pcmC0D0p
and this gave a sound device control error.
Just did some digging around and saw that I didn't have any oss modules running. Are they the culprits? If not how would I make mp3blaster use my current devices else do I need to reconfigure my kernel to have the oss modules?
Ubuntu Multimedia :: Make Speaker Work On Asus N53Jn?
Jan 10, 2011I has just got Asus N53JN, i have tried to installed both Ubuntu 10.04 and 10.10 but the speaker not work.lspci | grep Audio00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: Intel [HDA Intel], device 0: ALC259 Analog [ALC259 Analog]
[code]....
Ubuntu Multimedia :: Make Gnash Work With Firefox As A Plugin?
May 30, 2011I am trying to replace Adobe Flash player with Gnash in Firefox, but Firefox is not recognizing Gnash as a plugin after I installed the Ubuntu package called browser-plugin-gnash. how to use Gnash as a plugin for Firefox? I am using Firefox 4.0.1 on Ubuntu 11.04 on a 32-bit machine.
View 3 Replies View RelatedOpenSUSE Multimedia :: Make The Mic To Work On 11.3 X64 (it's A Headset's Mic)
Jul 8, 2011I was trying to make the mic to work on openSUSE 11.3 x64 (it's a headset's mic). At the beginning I thought it was just a mater of plugging the mic on, as it's the earphones'case, but didn't work. Then I found this link: Skype, KDE4, OpenSUSE 11.3 and PulseAudio Doesn't sound bad, but I also use Wine and Pulseaudio is said to be not compatible with it.
So, if Pulseaudio is enabled with setup-pulseaudio --enable, how do I disable it should I find problems with Wine? Is Pulseaudio really needed to make the mic to work, or it depends on what I want to use it for?
Ubuntu Multimedia :: Internal Speakers Don't Work - Headphone Volume Is Very Low / Make It Up?
May 16, 2010I have an imac and i recently decided to dual boot Ubuntu as well.
The sound is fine on the mac partition but the internal speakers dont work on the Ubuntu side.
headphones do work but the volume is oddly low
Nothing is muted on alsamixer, and I think i have the right driver for my sound card
Ubuntu Multimedia :: Make Radio-canada Streams Work In Maverick?
Dec 15, 2010This is an eternal problem with radio-canada streaming content, and it seems every new version of ubuntu we have to go through different processes to get it to work.In some previous versions, following the guidelines provided by radio-canada worked, but they are quite outdated now and some of the packages they refered to do not even exist anymore. I make regular reports of their website, but users complaining only end up by, if they answer at all "it works on our computers so it should work on yours" or "why don't you use windows".
Basically, their guides consist of removing the totem totem plugin, installing flash-plugin-nonfree and the mplayer plugin.I read somewhere the mplayer plugin is now gecko-mediaplayer, which I installed, but the videos still don't work.
Debian Multimedia :: Can't Make Sound Work In Pidgin
May 31, 2010I can't make sound work in Pidgin. I've tries every single method (aplay %s with Command, ALSA, Automatic etc.). Anyway, I once was hearing sounds, but later they've gone again. I have ALSA set up in 'System - Prefs - Sound' and also in 'Multimedia Systems Selector', Debian Testing (sid) 2.6.32-3-686. I also cannot set the tray icon to 'Blink On New Message'. When I recieve a message - I only see a smilie there, no 'blinking'.
View 1 Replies View RelatedDebian Multimedia :: Adobe Flash 10 Consistent Way To Make It Work?
Dec 5, 2010I have the latest version of Debian Lenny AMD64 installed on my brother's computer. I am trying to get Adobe versions of flash to install on his computer. It seems no matter what I do I get the freeware version installed which unfortunately is not up to the task. If I try to remove the freeware version the package manager tells me it needs to remove the gnome as well. How can I keep the gnome and at the same time get Adobe version to install. Yes I have a multimedia repository installed and I tried reinstalling Mozilla Adobe package with no success.
Searching forums did not result in any helpful ideas.Things I have already found out from reading this forum.-I have to purge all freeware version of the Adobe flash plug-in. I can't seem to find a way to do this without removing the gnome desktop. It seems that the plug-in is a dependency for the gnome desktop environment. Yes I want to continue to use the gnome desktop environment. I have to install flashplayer-mozilla package from the Debian multimedia nonfree repository. That I can successfully do, and have done so without success. It installs successfully, but it still shows version 9 of the plug-in. I believe version 9 is the free version. What I would like to use the free version, it's just not compatible with the websites I go to.
Debian Multimedia :: Kde4: X Stopped Working - How To Make It To Work
Mar 10, 2011There seems to be something that has changed in the newest stable Debian - I chose kde4 as my default desktop at installation, and it worked fine. Then I went and changed some options in both /var/run/kdm/kdmrc and /etc/kde4/kdm/kdmrc, something I have done many times before without problems.
However, when I tried to restart kdm with /etc/init.d/kdm, things didn't come up - no X, no kdm. When I rebooted the machine everything seemed fine, so I thought the problem was solved; but this morning I wanted to change something else - I don't want kdm to remember the last user, and I don't want to see a list of users either. Now dkm and X fail even when I reboot; I also find that /var/run/kdm/kdmrc has disappeared - I am certain I didn't remove it.
The strange thing, when I try /etc/init.d/kdm, I can kdm hanging around all alone in the process list, but no X or greeter. So what is going on - what should I have done instead? And can I repair it? I can of course reinstall the system, but I hate to think that we can't manage better in Linux.
OpenSUSE Multimedia :: How To Make Win32 Codecs Work On 64 Bit System
Jun 12, 2011How to make win32 codecs (package w32codec-all) work on 64 bit system? Simple install of "w32codec-all" package doesn't help. I tried to compile mplayer from sources. After finishing configure, the script returned that win32 codes will be unavailable because of 64-bit system.I need to view some avi-files coded in Intel Indeo 4. As I understand, this codec exists only in win32 codecs.
View 9 Replies View RelatedOpenSUSE Multimedia :: How Do I Make VLC Work - Whenever Load Disc Doesn't Give Option To Play
Jun 5, 2011I am using Suse 11.4, with the Gnome desktop. I have downloaded the VLC player, but cannot work out how to make it play CDs in the CD drive. Right clicking on the Audio Disc icon that appears on the desktop whenever I load a disc doesn't give me an option to Play using VLC. Is there a way to make VLC the default player for CDs?
View 9 Replies View RelatedUbuntu :: Compiz Doesn't Work - How To Make It Work
Jul 29, 2010I'm having trouble getting compiz to work on my Laptop. It worked for a while and then I turned on Shift Switcher and a message popped up saying..."The new value for the button binding for the action Terminate in plugin Shift Switcher conflicts with the action Zoom Window of the Scale Addons plugin. Do you wish to disable Zoom Window in the Scale Addons plugin?" I was given the option of Set Terminate anyway, Don't set Terminate, and Disable Zoom Window. I clicked Don't set Terminate and ever since the only thing that works in compiz are the bindings in the general options. I've used synaptic to completely remove and then reinstall compiz but the problem persist. Something else weird, all of the changes I made are still there, even after complete removal, but they don't work?
View 2 Replies View RelatedUbuntu :: Hibernate Doesn't Work - How To Make It Work
Oct 29, 2010When I try to hibernate, the computer just goes to a blank, black screen and doesn't turn off. I have to hold the power button to get it to shut down, and when I turn it back on none of the programs running before hibernation have been saved.
View 8 Replies View RelatedUbuntu :: Unity Doesn't Work - How To Make It Work
Feb 16, 2011I just recently (about an hour ago) installed Ubuntu Netbook edition on my old laptop, and I was greeted with the message, that unity could not be run due to some sort of missing driver...fair enough, I was then greeted with the default Ubuntu desktop, I installed all my needed software (wine, google chrome) and installed the missing display drivers. I then rebooted the system, and once again I am stuck with the default desktop, and not the Unity interface. I checked the software center, and it says Unity IS in fact installed.. And yet I cannot make it appear. So now I ask you Ubuntu veterans. How do I make it work?
P.S. I wiped the system of windows, and the computer is an old HP Pavilion DV6000
Debian :: Usb Stick Don't Work - How To Make It Work
Jan 14, 2011I just installed Squeeze_di_rc1, whit gnome, when i insert any usb stick i recive how can i solve it?At the same times i tried to format in fat 16 with gparted but the result is the same.
View 6 Replies View RelatedUbuntu Multimedia :: Skype - Pulseaudio - Sound Output Or Input Does Not Work At All Doesn't Work
Sep 11, 2010When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
Ubuntu :: Make Mv920 Work With 10.04?
May 5, 2010My mv920 Monitor just shakes and fuzzies ubuntu 10.04 and on my lcd it dosent. its a CTR.
View 2 Replies View RelatedUbuntu :: Can't Make Bluetooth Work
Oct 15, 2010Im trying to get a Bluetooth USB dongle work but I cant.
Bluetooth Preferences doesnt recognise it and bluetooth manager gives me this error "Bluez daemon is not running, blueman-manager cannot continue.". See attached captures.
I already tried many solutions proposed in other threads with no luck. I reinstalled their packages and it keeps the same.
I'm using 10.10 upgraded from 10.04. With 10.04 I had the same issue.