Hardware :: Change Input Of First Button (Alt-C) To (xf86audiomute)
Feb 11, 2010
I have wireless USB headset with four buttons. Two for volume control (They work).
I'd like to use the other buttons too. One gives 'Alt-C' as input. The doesn't give visible any input. I tried to get the input with Wireshark but it could only capture 16 packages when plugging in the headset.
So my question is: How can I get the input for the second Button?
and how can I change the Input of the first button (Alt-C) to e.g. xf86audiomute?
I recently got a real fancy unidirectional microphone, but when I go and use it, something strange happens. The mic is a mono mic, but when I record something, it appears to think it's stereo. Instead of having the same thing on both channels, it puts it all in the left channel, and silence on the right channel.
I tried fiddling with alsamixer. In capture (F4), adjusting the "Capture" device has an effect. However, it doesn't do anything useful. Lowering the right channel to zero does nothing, lowering the left channel to zero creates silence, and disabling the right channel creates silence.
In my System>Preferences>Sound (or pavucontrol, or what-have-you), there are "Analog Stereo Input" and "Analog Stereo Duplex" options there, but no "Analog Mono Input" or "Analog Stereo Output + Analog Mono Input" options (the latter being ideal).
Something interesting, though, if I do this: Code: arecord -r 96000 -D pulse -c 1 -vv -V mono /dev/null it works correctly and outputs on both channels. But if I do Code: arecord -r 96000 -D pulse -c 2 -vv -V stereo /dev/null then it's back to the same behavior. The VU meter on the second command shows the left channel going up and down as I make noise, but the right one always at zero.
The machine does have a crap internal mic built in to the screen bezel. If I do either of the above commands, they both work correctly. The stereo VU shows the same activity for both channels.
The machine is a Eee 1015PED, which has Intel integrated sound. Something probably insignificant is that the mic has a 1/4 inch mono plug, and to get it to plug into the Eee, I needed to get a 1/4 female to 1/8 male adapter. The mic's 1/4 plug is mono (duh) and therefore two-conductor, but the adapter I got is stereo, or three conductor (L, R, GND). I don't know if this is tripping something in hardware to tell it it's stereo or something.
I tried the mic on my desktop, which has a SB Audigy 4 (the non-pro flavor) and that has the "Analog Mono Input" function, so that works fine. Is there some way to turn this stereo input into mono input?
I installed Lucid. I used to have Ubuntu 9.10 and to connect my iPod to my laptop's speakers. There was an option in 9.10 in the Sound Options to change the Mic Input into a Line Input. But now unfortunately I can't find it in Lucid have only 2 audio ports in the laptop: Headphone port, Mic port.
Is there any way to change the Yes/No buttons order on the sistem windows (warning, question etc)? Like, is it possible that the "Yes" button appears in the left and the "No" button appears in the right?
don't get impressed with a vanilla kernel 2.6.37 if the "yes" button isn't in the "right place".
I keep trying to use Ubuntu Tweak to change the start button logo, and for some reason it did before, but now it just won't change. Its a 24x24 png with transparency.
I use Jolicloud/Ubuntu with Gnome. I noticed the "Save Screenshot" program launches when hitting "PrintScreen". There is just one problem, I am currently waiting for an old Mac keyboard (and Mighty Mouse) to arrive from eBay. The Mac keyboard DOES NOT have a PrintScr button, is there any way I can use one of the dead key's (eg: F13 etc.) and assign that to the program, or can I use one of the button's on the side of the Mighty Mouse (I would prefer that)
i open google page and want to search something, now , i want to change the input font which will be put into the search box, the default is english, how to exchange with others.
I installed SuSe Linux. By the installation I forgot to set the key-board to German. How can I change it now? I don't think I have to re-install the Linux again, right
I just want to change the color of the close button on windows of the Ambiance theme from the orange to blue. I copied the theme from usr/share into my .themes folder so I don't mess with the original, and then I just changed the name to Blue Ambiance and changed the appropriate .png files I found in the metacity folder to blue.When I select this new them in my appearance menu though nothing changes.
how to change my input language (the way typing in accents affects the output character).
Currently I am on a Brazilian abnt keyboard and an English system (which is what I want), but I am unable to output accented characters - which I sometimes want, when I am not programming. I need something to switch around, but cannot find where to configure additional languages (not keyboards) neither where to switch.
I am currently using a Ubuntu Netbook Remix 9.04 When I press the power button, I see a dialogue box which asks for confirmation and if nothing is confirmed system automatically shuts down in 60 seconds. I want to change this time of 60 seconds to say 30 seconds. Is it possible? Also is there a way to hide that dialogue box...
When using the above image viewer, it would be easier for me to be able to close the viewer/image while displaying an image in fullscreen mode, by clicking on the middle mouse button, rather than right clicking and choosing "Exit full screen", then clicking on the cross in the corner of the window. This is similar to how Firefox can close tabs by middle-clicking with the mouse wheel.
Mouse function editing in GQview seems limited to controlling whether the scroll wheel pans up and down the picture, or moves to the next/previous picture. Any way I can edit the preferences file for GQview at .gqview/gqviewrc in order to achieve the above shortcut facility on my mousewheel, for this application? Or is anyone familiar with another Linux image viewer that does allow the mouse to be programmed in this way?
i have this weird problem with my pavucontrol. for some reason my input levels go up and down by themselves when i'm talking on skype...mostly up...and it's annoying because i'll be talking normally, but to the people i talk to on skype it sounds like i'm yelling, and i have to have pavucontrol open always to constantly keep the levels under control..i've made a short desktop recording showing what i mean.i didn't include sound, but as you can see, i'm not turning the levels up manually..i just talk and they go up by themselves
I really don't know what to call it, but I want to change the color of text that appears before you type in whatever your input is.
For example:
Code: negrabee@david-desktop:~$ ls /home/david/
I would want "negrabee@david-desktop:~$" to be in a different color. When you have whole bunch of commands and text in a full screen terminal, it gets really annoying to have to look for where you're entering the command so changing the color.
When in the interactive envirment, my Input and Output are all mess-up. So i want to color the Input and Output with two different colors.. so i can figure them out..
In testing that all my bits of hardware work I have come to my 3Dconnexion SpaceNavigator. The hardware is virtually new and works absolutely fine in XP (that is what I am trying to escape from).
When the spacenavigator is plugged in it works absolutely fine so long as I move the thing with a soft feather. It is so sensitive that it is un-useable.My problem is that although the system has recognised it and has it in the hardware scan in YaST but nowhere can I find any way to change the sensitivity settings and button functions.
I have a file called a.sql which I need to execute in a database and the script I am calling in a shell script .Before executing the script I have to change a value in the script according to the user input.How can I do this .
Eg... A.sql file contains an sql query like this:
And My shll script is like this:
When executed the script it asks for enter salary and if the user has input 5000 then the Enter_salary value in a.sql must be replaced by 5000.
i have both windows XP and suse linux installed in my hp pc with monitor HPL1710. when i in stalled Scientific LInux (cern) in the unallocated space using default partirtion it is in stalled. unfortunatately i have choosen the screen resolution to be 1600*1400. So when i try to reboot it says:
Code:
Input signal out of range change settings to 1280*1024-60Hz I have no idea what to do ? I dont find any scientific linux sub forum . so i am sending the thread here.
Ubuntu is perfect for me, except that i have to dual boot sometimes to windows 7 for the one application that wont run in a virtual environment (LockDown Browser, and occasionally onenote). Except, i cant find tablet control features in Ubuntu, to change input devices (the touchscreen is awful, but I cant turn off the option to use finger as an input device. Also, when i boot to windows 7, the mouse track pad/left and right click doesn't work (they work in Ubuntu)? The keyboard does, and so does my stylus (which I have to use as a substitute)
While searching the net I found how to complete disable the functionality of the middle mouse button but I need this button for many other uses.I want to disable only it's paste action.
I know how to make another button act as the middle button but how can I map several mouse buttons to the middle button? xmodmap complains if I repeat button numbers in the pointer option.
i m using ubuntu 10 .10.for 2 weeks it was working fine yesterday onwards it changed.tried all themes but still i cant drag the window to make it small in sizethere is no close button minimize and maximize button in all the application and files[URL]
I just installed Ubuntu Natty on my desktop which uses an nVidia GeForce 7+ chipset. After installing Ubuntu, I noticed that when the GRUB boot menu should show up, my monitor says "Input signal out of range, change settings to 1600 x 900 - 60Hz", and it stays that way until the Ubuntu desktop shows up. The Ubuntu desktop shows up just fine. It's just that GRUB and Plymouth don't show up and my monitor gives me the aforementioned message.Here's my xorg.conf configuration after I ran the nVidia X Server Settings app:
# nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 Section "ServerLayout"
I would like to use Japanese kana (hiragana, katakana, kanji) on Ubuntu but everything that I've tried to get it set up and running isn't working. The Spanish that I have set up is working perfectly so far.
I've read, the SCIM input program should start up automatically when loading a program, it doesn't. When I have it loaded I cannot seem to get the input working.
Nautilus as root is on the left; nautilus as Ubunterooster (normal user) on the right Screen-shot# 1, Permissions before I change them. #2, after I change and hit "apply to enclosed files" before clicking the button labeled "close".
#3, The containing folder has all folders as belonging to root even though I told it to "apply to enclosed files".
#4, Obviously, I don't want to change permissions on every single file individually. I don't know how to change permissions to allow the folders and files to be able to be viewed by me (as a normal user) or by my SAMBA connected father.
