Ubuntu Multimedia :: X Not Using Options Under Device Section Of Xorg
Apr 4, 2010
I'm using an Intel 965 GM graphics chip with the "intel" driver. I'm curious as to why it doesn't seem to be using any of the options that I'm placing under the Device section of xorg.conf. Here's an example:
Section "Device"
Identifier "Configured Video Device"
Driver "intel"
Option "AccelMethod" "XAA"
EndSection
In my Xorg.0.log file, I get the following message:
(WW) intel(0): Option "AccelMethod" is not used
Why would it not be allowing me to use options such as this? I know that my driver and video card are compatible with this option, as is indicated in this manual: [URL]
View 1 Replies
ADVERTISEMENT
Nov 10, 2010
I have a Dell precision M50 which has the NVIDIA Quadro4 500 GoGL. When I upgraded from 10.04 to 10.10 the proprietary NVIDIA driver stopped working. At that time I found a simple solution which was to replace in the xorg.conf file the line in the Section "Device":
[Code]...
View 6 Replies
View Related
Jun 18, 2011
I found in my xorg.0.log the the xorg ATI driver is failing ALL options.
Code:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[Code].....
View 9 Replies
View Related
Jun 22, 2010
I'm using a netbook with an intel GPU and a recent intel driver. In my .xinitrc, I have this command: xrandr --output LVDS1 --set "scaling mode" "Full aspect" But that causes a brief black flicker and stalls the login a little bit. I'd like to specify this in my xorg.conf or find some way for this option to be set as Xorg starts. I don't know what the xorg.conf equivalent option is, or even if one exists.
View 5 Replies
View Related
May 24, 2011
I need to add an option to my xorg.conf to enable "backing store", like this:
Section "Device"
Identifier "Miserable Old SVGA"
Driver "miserable"
Option"BackingStore""True"
EndSection
But I don't have an xorg.conf file in Natty. There are several conf files in /usr/share/X11/xorg.conf.d/, but I'm not sure which one to add it too (I can't find the Device section in any of them). I guess I don't even know if the "BackingStore" option is valid in the latext Xserver.
View 2 Replies
View Related
Dec 26, 2009
I just installed 11.2, and discovered when I went to setup my Logitech Marble Trackball, that there was no /etc/X11/xorg.conf file. After some Googleing, I created one using sax2, Edited it to add the appropriate parameters to enable scrolling using the ball, and all works great.
My question is if there is a more "correct" way to change the parameters, as the mouse parameters are obviously stored somewhere on the machine.
BTW, for those with a Marble Trackball, all you need to know about the xorg.conf setup can be found here:
Logitech Marble Mouse - ArchWiki
View 2 Replies
View Related
Jul 8, 2010
You maybe know that VirtualBox has an "immutable" feature for HDD images. I.e. setup the system, if the stuff is in place, you can set the image to IMMUTABLE to prevent any changes to the image. Differences are written to a separated image. So on the next boot you'll see that all the (unintended) changes are gone and the "old" system is up & running again. I run an old SuSE 10.3 on a write-protected SD-IDE-Adapter. Changing and playing with RPMs is a mess due to around 50 changes I had to do to make that work. Is there any option to mount an SD-card as RO and having all the changes written to e.g. /dev/sda3? To make it clear: I thought about something like a RAID-X system, but could not find any description on how to setup a raidtab.
View 3 Replies
View Related
Oct 14, 2010
When i create a new event device (/dev/input/event) it is automatically grabbed by Xorg:
Code:
(II) config/udev: Adding input device Keypad Emulation Driver (/dev/input/event7)
(**) Keypad Emulation Driver: Applying InputClass "evdev keyboard catchall"
[code]....
View 1 Replies
View Related
May 14, 2010
When X.org boots up, Synaptics touchpad works well. But when I remove the module it falls back to /dev/input/mice and don't use normal driver even when touchpad is available again.
Xorg.0.log:
...
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD)
(--) Synaptics Touchpad: touchpad found
# { rmmod psmouse && echo mem > /sys/power/state && modprobe psmouse; }
(WW) : No Device specified, looking for one...
(II) : Setting Device option to "/dev/input/mice"
...
How to tell X.org to try it's InputDevice again (without restarting X server)? rmmod psmouse is needed to prevent crashing of Acer Extensa 5220 when resuming from suspend-to-ram. Found answer myself: Doing xinput set-int-prop "Synaptics Touchpad" "Device Enabled" 8 1 after reloading the kernel module reloads touchpad. Now suspend-to-ram works OK.
View 1 Replies
View Related
Jul 24, 2011
Is it possible to add more than one graphic device driver to xorg.conf and it will load automatically? It is important to autodetect because I am using the configuraiton read only. This is because it's a custom LIVE CD.This is what I currently have, and it works!
Problem is if I put my Live CD in my brothers machine, it fails to load because it uses a Radeon driver!I can preinstall the ati packages I need, so all i need to know is how do I make it work?
View 1 Replies
View Related
Aug 16, 2010
I'm looking for a simple media player that can loop/repeat a given section of a song; say from 2:55 to 3:20 if I wanted. This would be useful for guitar practice.
View 8 Replies
View Related
Nov 14, 2010
I have a problem with the graphics on my thinkpad a22m laptop. specs:
900mhz cpu
256 ram
20gig hd
??ati rage mobility m3 video card ??
when I start up ubuntu (10.10) and reach the desktop, the screen is messed up. The center of the screen becomes blurry, and it looks like what is normally the right part of the screen is duplicated in the middle of the screen (with what should be the middle of the screen disappearing).
I think its an ATI video card, and I tried to install different driver from Softwarecenter but no succes.I know the screen is working, because when I boot forinstance, the Ibm logo is showed nicely across the screen. So its not a hardware issue. Another thing, I got puppy linux to work correctly after having the same grapphic issues on that OS when I first installed it. But some how I managed to get the right drivers. But as I like ubuntu more, I would appriciate your help with figuring this out
ps. when I try to setup screen resolution in System>Settings>"resolution", Ubuntu says "unknown display" (marked with red color).
View 1 Replies
View Related
Mar 15, 2010
Anyone else notice this. You can't increase the view area for the lower section where the project islisted.I could also only burn one data dvd. It wouldn't see the next blank dvd. I had to shut k3b and start again.reported to packman and packager
View 9 Replies
View Related
Apr 13, 2010
All my music editing software programs say, "unable to open device /dev/dsp.Device or resource busy." How can I fix this?
View 3 Replies
View Related
Oct 25, 2010
I am using Ubuntu 10.10, and am trying to use Rhythmbox. I have 180gb of music on an external hard drive, and have that music folder set in my library location settings. When I open Rhythmbox, my drive shows up, and it starts importing. It doesn't show up in the "Music" section, and when I close Rhythmbox, then re-open it, it rescans that drive all over again. what I'm doing wrong and why it won't save my library,
View 1 Replies
View Related
Jan 3, 2010
There are 3 versions of Skype for Ubuntu on the Skype download section. Does anybody know which is the correct one for Ubuntu Karmic?
View 5 Replies
View Related
Mar 19, 2010
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies
View Related
Jan 1, 2010
I want to extract *aka rip *aka import songs from my CD to my computer.In two different formats, one being lossless format (FLAC) and lossy format (MP3).I want control over the kbps in the lossy format and I also want to remove the licensing as this creates problems when trying to copy the songs over to my mobile device.And of course, include the metadata while extracting.
This all seems fairly simple right?Well, whenever I am extracting the songs from different applications it seems like I have no control over the preferences of the application or the extracting process. There's just a start button and that's it.I have tried the "Sound-Juicer" and "Banshee".Defaults settings for Sound-Juicer extracts at 128 kbps and Banshee extracts at 160 kbps only in ogg format.In the past I have done all my cd extracting in Windows, and I would really like to move over to linux in this field.I used Winamp back in the day and was really happy with the PRO version of it. Lame Mp3 Encoder with Winamp Pro.
View 7 Replies
View Related
Aug 8, 2010
When using libmp3lame with ffmpeg is there a way to use lame options?
Code:
ffmpeg -i foo -acodec libmp3lame foo.mp3
For example:- --vbr-new, --abr <bitrate>, -V (n) and -q <arg>
I think it is possible to pipe ffmpeg to lame then use the options.But is it possible to do it without a pipe.
Code:
ffmpeg -i foo -f wav - | lame --vbr-new -V 4 - foo.mp3
View 7 Replies
View Related
Jun 3, 2011
I can play nearly any video format on my pc because I have loaded all of the nessessary software. But what about tvs? I loaded some videos onto my flash drive and then I inserted it into the usb port of a LCD tv. Nothing on the drive would play. I assume it is because tv have a limited number of formats that they will play.Now, if I intend to download videos and convert them so that they will play on a tv, what are my best options for..
#1 What is the preferred conversion software?
$2 What is the preferred format?
View 4 Replies
View Related
Jun 14, 2010
I am a first time user and recently installed 9.10 from a LiveCd then immediately upgraded to 10.04 LTS. I had no black screen problem, but my resolution is stuck at 640x480 with no other options. I upgraded my driver to NVIDIA-Linux-x86_64-195.36.31 and the resolution remains the same. I have a Geforce GTS 250 and an Acer H233H capable of 1920x1080_75.
My XFile:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Jun 3 09:41:37 PDT 2010
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package .....
I have tried entering a CVT generated modeline to the xorg file but it did nothing.
View 2 Replies
View Related
Mar 27, 2011
I'm having trouble with my sony bravia and the automatic setting of the display over HDMI. In the Xorg.0.log I get a bunch of "EDID contradicts itself" error messages and then finaly it will set a 1920x1080 resolution at 50Hz. In the nvidia gui I successfully see the 24Hz, 50Hz and 60Hz modes, but when I select them, my TV does not recognize them as such. Because of this, xbmc can not set the right refresh rates (I assume this is the cause) and I get tearing.
Some output:
Xrandr gives:
Code:
1920x1080 50.0* 51.0 52.0 53.0 54.0 55.0 159.0
At the same time, "nvidia-settings -nt -q RefreshRate" says
Code:
60.00 Hz
[Code].....
View 2 Replies
View Related
Sep 1, 2011
I have an apple tv1 running ubuntu hardy. Due to audio video requirements I do not want to upgrade. I am trying to get 1080p24 working my TV. I ran X in verbose mode to ensure that my TV supports 1080p24 and it does. For some reason the X is not able to see the 1920x1080 @ 24Hz mode. I got the required information to add the modeline to my xorg.conf.
My xorg.conf is as follows
Code:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
[CODE]....
When I check the Xorg log file I have the following warning
Code:
(WW) NVIDIA(0): No valid modes for "1920x1080_24"; removing. Is there any way I can append the valid modeline for 1920x1080 @ 24Hz to. I am avoiding using a modified EDID.
View 3 Replies
View Related
Jan 15, 2010
(1) I'm wondering if there is a way to have abcde play the songs while it is encoding? I understand that this would be a lot slower.
(2) Is it possible to have abcde start playing right after it finishes ripping the first track and then have it add on the other tracks to the playlist as it rips them.
Is there anyway to do one or both of these from the command line or with abcde's built-in options?
View 4 Replies
View Related
Feb 9, 2010
I have recently got a new car, which as a USB port to connect either an iPOD or Storage Device. For some reason I decided to get a portable 500GB HDD to put my music on. When you plug in an iPOD you get the nice options to search by genre, artist, etc. You don't get this option with a storage device, just the option to go through the folders. The car stereo will read playlists. I'm wondering whether there's an easy way to create playlists so I get these options:
Artists > Artists A-D
Artists > Artists E-G
etc
Genre > Genre A-D
etc
I know rhythmbox can do this manually (as can iTunes) but surely there's an easier way. I'm planning to keep adding more music so an automated process would be nice to keep the playlists refreshed. Where the playlists are saved onto my HDD rather than having to save them one by one.
View 3 Replies
View Related
May 26, 2011
I've just bought a new rig. The graphics card (as listed in the title) is a ATI Radeon HD 5830. With the normal out of the box drivers I can get a resolution of 1366x768 (The native resolution of my 32inch panel) but the 3D performance isn't good.With the ATI proprietary drivers installed 1366x768 isn't in the options (The ATI menu and the normal one)So I need to generate an xorg.conf and add the resolution?[edit] OK so I checked to see if the 3D performance was any better with the proprietary drivers (despite the funky resolution) and it caused Minecraft (The only game I really play under Linux) to freeze on startup. I think what I'll do is stick with the Radeon Open Source driver (which runs all the visual effects nicely anyway) and just do all my gaming in Windows
View 2 Replies
View Related
Aug 11, 2015
I use Debian 8 with mate and when I run
Code: Select allps_mem
It show Xorg use more than 1.9GB of RAM and sometimes my system hang and freeze.
View 14 Replies
View Related
Feb 9, 2010
I see that 9.10 doesn't use the xorg file anymore. What am i going to edit now? I just installed the ATI graphics driver and now i need to have ubuntu use it instead of the vesa driver. How can this be done with no xorg conf file?
View 4 Replies
View Related
Feb 28, 2010
I just bought a new desktop with integrated intel graphics and built in HDMI. I don't have a monitor, only a 42 inch LCD TV. Now, when I plugged in the HDMI cable, when ubuntu loaded, it was oversized(overscanned) cutting off both panels(think zoomed in a bit). After failing to fix, I bought an ATI HD4350. When using the open source ati drivers(default on reboot), the screen looked perfect and fit perfectly when using the DVI to HDMI cable to the TV, was a bit UNDERsized when using a regular HDMI cable to the HDMI port on the new video card. Now, when I installed Catalyst...same problem as before. Entire image was overscanned using either port. Decided to get a better video card anyways, so returned ATI for Nvidia 9500. When booting again into a clean install, with nv drivers and using DVI-> HDMI cable(9500 doesn't have HDMI out), the image again fit perfectly on the TV. When installing the Nvidia proprietary driver, image goes back to being overscanned(Exactly same proportion as intel HDMI out and ATI with catalyst). Thankfully Nvidia gives an overscan correction tool that I scaled the picture down with, but it's ever so slightly off center or our of proportion(that is, it leaves small black strip on either side when height is adjusted perfectly).
In a nutshell, the open source drivers display perfectly. Proprietary and intel drivers are overscanned. Now, to confuse you anymore, with Lucid, even the open source ATI driver is overscanned by default. I'm trying to track this problem down and have no idea where to start.
View 2 Replies
View Related
Apr 18, 2010
I am trying to fine tune the S-video output settings for my xubuntu box running 9.10. I am having some trouble getting modes loaded via xorg.conf. Currently, my xorg.conf file looks like:
Code:
Section "InputDevice"
Identifier"Generic Keyboard"
[code]....
View 1 Replies
View Related
