Ubuntu :: Audio Duration Zero / Fix For This?
May 7, 2010
I recently did a fresh install of 10.04 and am experiencing a really weird issue. I right click on an audio file (in my case an MP3) and pull up the properties. I select the Audio tab and look at the duration for the file. All of my file (which play just fine) are showing a zero duration. Is this a known bug and is there a fix for this somewhere?
I should note that these are all valid MP3 files, with duration time previously showing under a 9.10 install.
View 3 Replies
ADVERTISEMENT
Mar 9, 2011
I have had no problems whatsoever with audio in ubuntu 10.10. Both input and output have worked great, but alas now there's a problem.
I recently installed ardour2 with jack (using apt-get) but for some reason, anytime I start ardour2 (which starts jack implicitly) all audio stops on the whole computer. That is my computer goes silent. As soon as I exit ardour2 audio resumes.
Also, although this will probably resolve itself when I resolve the other problem, when exporting a project to audio file from ardour2 it exports silence for the entire duration, even when ardour2 is exited and audio has resumed.
I'm no linux novice, so I'm not afraid of command line solutions (I prefer them actually) however I know nothing about jack or audio editing in linux whatsoever, so if you could be very specific about jack terminology that would be great.
View 1 Replies
View Related
Jun 8, 2011
Is it possible to set how quickly the notifications in KDE4's notifications widget will disappear? They stick around a couple of seconds too long for my taste.
View 9 Replies
View Related
Jun 14, 2011
We have the below script, to check the process MEDT, if it doesn't run , then it will send a message immediately. the same script, if I want to check if it is continously running for more than 1 hour, then it should do the action mentioned below.
View 2 Replies
View Related
Mar 12, 2010
I am planning to take up RHCE exam, but i have a doubt about the exam duration does it consist of 2 section where section 1 is for 2.5 hrs and section 2 is for 3 hours (total 5 1/2 hours) or does it consist of single section of 3.5 hours.
View 1 Replies
View Related
Aug 8, 2011
I have made a shell script as below to find that how much time is taking between one command to another.
View 3 Replies
View Related
Nov 5, 2010
I have the following problem;When I concatenate several mp3 files the time duration is falsely detected by Rhythmbox when I open the newly created mp3 file. VLC Player however detects the correct time duration. I tried two ways of mergen the mp3's and both have the same falsely result. - mp3wrap- catI currently fixed it by opening the mp3 in VLC player and converted it again to a mp3 file which resolved the issue at hand. However this is not a solution I would like to have, nor a answer to what is the cause of the problem.So my question is simple -- what is the issue with the mp3 file and why is Rhythmbox indicating a falsely time duration?
View 3 Replies
View Related
Nov 12, 2010
I am experiencing severe DNS delays today, so I tried to install DNSMASQ by following the instructions given on several pages on the web to make it function as a local DNS cache.
The installation was successful, and after editing the configuration files as instructed, I now have a working DNS cache on my computer.
However, it seems that the addresses are not cached for a long time ; for a given domain, the speedup lasts for a few minutes. If I try to access a previously visited domain once more after several minutes, a new (slow) external lookup is made.
Since websites' IP addresses are not changed every five minutes, would there be a way to tell DNSMASQ to keep the IPs in the cache for a long time (several hours at least) ?
This is very important for me because the DNS lag that I am experiencing makes external lookups last 10 to 20 seconds.
View 1 Replies
View Related
Apr 10, 2011
I have squeeze installed on an AMD machine. i compiled the kernel based on the config file in the /boot.
it was surprisingly much time:
This was the first time using AMD machine, i had experience with some P4 machine to have much shorter kernel compilation time.
The machine:
what do i do in the wrong way? or is it the "feature" of the this old AMD?
View 7 Replies
View Related
Oct 22, 2010
On Debian 5.0 I wish record the duration of the dial-up connections. To connect I use Wvdial through Gnome PPP graphic interface. Do you know a program with graphic interface or that it creates a simply log file with for each connection: date-time start connection, date-time end connection, telephone number called?
View 3 Replies
View Related
Nov 15, 2010
I would like to subtract the end time with a start time in bash. How can I do it?
Here's a script of example of what I want:
View 8 Replies
View Related
Mar 25, 2011
I'm trying to set up my Thunderbird 3.1.8 (running on Ubuntu 10.04 LTS) to play a .wav file of my choice when new mail arrives. The file I've chosen is 8,8 KB in size and lasts 3 seconds. I've selected the "Play a sound" + "Use the following sound file" options in my Preferences, but only the first second (if that) of the sound gets played - both when I click the "Play" button in the Preferences menu to test it, as well as when receiving mail. Restarting the program with my new settings doesn't help.
Actual question(s):
- Is there a limit on the size/duration of the sound one can use for such a signal in this program?
- Is there any way to modify this limit?
View 2 Replies
View Related
Jul 18, 2010
Ubuntu 10.04
When I execute a sudo or gksu evolution (e.g. synaptic package manager) I find that the escalated privileges remain in effect for a period of time. Sometimes, not often, the notifier applet shows an icon indicating that escalated privileges are in effect.
What I would like to know:
What is the default amount of time which escalated privileges remain in effect on my system?
Is it possible, if so how, to change this amount of time?
View 3 Replies
View Related
Feb 1, 2011
How to disable the LDAP Users automatically with the specified time duration. For this any configuration file required or else a script need to be written.
View 1 Replies
View Related
Jan 10, 2011
How I would capture on-screen audio AND my webcam audio at the same time.(My webcam seems to rely on pulse).
View 1 Replies
View Related
Jan 30, 2011
I want to listen to this audio file: [URL] but my real player 11.0.0.4028 gold desn play it, it says that there is a codec 28_8 missing, I go to relaplayer page, download the last release available for linux systems, but the message is the same : audio codec missing and doesn't play the audio.
I havev tried to play the audio with smplayer (not luck), vlc can play the audio but the pause button doesn't work so I have to listen the entire audio all the time I stop it playing. Is there any audio player capable od reproducing in the proper way this audio in ubuntu? No one of my video players totem, smplayer, realplayer or vlc are capable of playing this video: [URL]
View 9 Replies
View Related
Sep 20, 2010
I am fed up of listening to my (Windows XP) gaming computer through headphones so I want to get it hooked to the stereo.
Rather than use a heck of a lot of wire, I can sit my Ubuntu 9.10 netbook on top of the stereo and stream the audio across WiFi.
So, ideally what I am after is something to capture the outgoing audio on the Windows computer, stream it across the wifi to the Ubuntu netbook and finally play it through the speakers.
View 2 Replies
View Related
Apr 9, 2011
What is available for ripping audio CDs besides Rhythymbox and Audio CD Extractor?
View 6 Replies
View Related
Aug 7, 2009
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies
View Related
Oct 17, 2010
I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
View 6 Replies
View Related
May 10, 2011
I have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
View 4 Replies
View Related
Nov 18, 2009
I am having trouble getting the pulse audio server to find the hw0 with the common m-audio 24/96 audiophile. This card worked with previous versions of all forms of pulse but seems to bork on the HW0 function for audio out...which is a stereo analogue simple output. Audacity sees the HW functions but pulse does not! Here is a screen shot of the pulse crap. And another screen shot of what the real card at "alsamixer -c 0" sees. There is no dac or adc detected or configured with pulse. This does not make any sense as alsa and alsamixer has all the correct device controls available to any other software that uses the ice1712 driver.
I am using Fedora 12 amd 64 as a live usb on a 16 gig stick and want to be able to record and mix audio on to HD with my reliable high end m-audio pci sound card without having to mess with the pulse crap or having to install a full HD option. BTW in the pulse sound configuration gui dropdown list there is no indication of HW0 and the only devices that are available in pulse are digital outs.....go figure, so essentially I can see all the correct connections and use programs that access alsa directly eg: audacity but have no sound through the crappy and ever borked pulse audio server! Any suggestions as to how to remove all the pulse stuff that comes with most distros that use gnome? I have done this deed before with Ubuntu but do no know how to do the deed with an rpm based system. If I install a non pulse version of xmms and let it use jackd then I should have reliable sound for cd audio etc and should be able to configure VLC, Ardour and Nted well without pulse getting in on the action and screwing up my sound.
View 1 Replies
View Related
Jun 7, 2011
to start off, i'll post the specs of the machine:
dell inspiron e1505
3.2 gb ram
1.86 ghz intel core duo
ati x1400 gfx
opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
View 3 Replies
View Related
Jun 1, 2010
I am having some issues with getting Ubuntu Studio 10.04 to work correctly on my system. Everything works fine except sound. I have a M-Audio Delta 66 audio interface and my onboard sound is disabled. When I run the command alsaconf I can see the ICE1712 card without issue. However when I run alsamixer the only option it is giving me is my HD sound from my ATI video card. For some reason it seems the ATI card has locked the audio to it with no way to remove it. I have reinstalled the alsa drivers for my card and can only see it through alsaconf. When I tell alsaconf to configure the ICE1712 card it says it configured it properly.When I run the command envy24control it says no ICE1712 cards were found.
View 9 Replies
View Related
Dec 22, 2010
Is there an application that anyone knows about that I can use to convert either an .flv or .ogg file that contains both audio and video to just an audio .ogg file (preferably vorbis+theora) without audacity? I'm fairly certain audacity could accomplish this but it seems like overkill for what I'm trying to do and the computer I'm trying to use does not run it so well.
::EDIT:: I should also mention that I've tried looking on google. I did find downloadhelper extension for firefox which uses ffmpeg to convert the files but I don't see any obvious way to strip the video.
View 2 Replies
View Related
Feb 7, 2010
on my PC I have 2 sound drivers, one from the mainboard (AC97) and one PCI card (ES1969). Because the mainboard sound path did not recording, I installed the PCI sound card and with 11.1, I managed it to play and record all audio data. With 11.2 the PCI sound path plays the system sounds (suse start-up or shut-down sounds) but not the streaming audio data (skype, flash player). But these are played by the mainboard audio instead. The audio-tests from yast->hardware->sound work for both paths. How should I configure the system to redirect the audio streams to the desired (PCI) audio path? The PCI audio is set as primary sound card and is not muted.
View 2 Replies
View Related
Aug 23, 2010
Say I have 2 speakers connected to 2 different sound cards. Under Windows, is it possible to have some sort of virtual device that would forward an audio stream to both sound cards? If this can't be easily done under Windows, a solution for Linux is also fine. lternatively, if the 2 speakers are connected to different channels of a sound card, is there any vendor-independent way to duplicate audio to both channels?
View 1 Replies
View Related
May 18, 2011
The workstation is running FC14.
I have the audio out of the media machine passed into the line in on my workstation. It's just handly to have the audio pass in this way so that i can manage the volume or headphones or whatever from one machine.
This worked, and worked well, for a very long time. I recently reinstalled the workstion, FC14 still. After the reinstall, my passthrough doesn't work.
If i start up some media on the media machine, and then open up the volume control on the workstation, i can see the volume meter moving along with the audio, but nothing plays out of my speakers.
View 1 Replies
View Related
Oct 29, 2010
i have opensuse 11.3 (64-bit) installed. kde version. my sound card is a creative labs sound blaster x-fi xtreme audio, pcie interface. i am able to listen to cd music without any problems but i am unable to get streaming audio when i visit any internet radio site, videos, yahoo!tv, etc. etc. for instance, when i visit videos, the video part is ok but i cannot hear anything through the speakers. something similar happens when for instance i go to [url] and select any of the music channels. a new window pops up but the music never even starts to stream.
i know for a fact that both sound card and speakers work fine because i've tested them with windows xp. so there must be some setting in opensuse that i've missed. the weird part is that i can listen to music cds without any problems...
View 5 Replies
View Related
Apr 3, 2010
Right after I installed F12 on my desktop (using KDE), System Settings showed 4-5 audio devices.
At the beginning, sound wasn't working, so I promoted the Intel audio device to the top of the list and then I got audio.
Next login, the system complained that there were unmanaged audio devices and I chose to keep the configuration (or something like that...).
However, now only the "Internal Audio Analog Stereo" device is listed and I have no sound again
I also tried to promote the GStreamer backend over Xine, without luck.
Here are some specs:
View 2 Replies
View Related
