Ubuntu Multimedia :: Usb Microscope Led Lights
Jun 30, 2010
I have recently purchased a usb microscope from Maplins, and although it does work with ubuntu 10.4 (and linux mint 9) I cant for the life of me get the led lights to work, the lights are kind of needed when viewing things close up.
Usb microscope link
The output from running lsusb gives the following -
Code:
Like I said it works, tried it with cheese, and I can get close up to stuff, but because the led's don't work it's difficult to get a clear picture with out a torch.
View 9 Replies
ADVERTISEMENT
Jul 21, 2011
I am the owner of a dj service we are trying to control intelligent lights using a uDMX interface from anyma, and Q Light Controller (qlc). As of now i have QLC Installed, And The uDMX Plugged in And It Doesnt Work, I Have installed so many things to try to get it working! Ive Installed libUSB DMX4Linux and many more... Nothing seems to work.
View 2 Replies
View Related
Mar 18, 2011
I would like to do is as the subject says, I want to take a music video and then sync several light channels to the music video.
I would like dimming control of the lights as you would have with a DMX 512 system or even Midi. In which the light programming is done in a choreographed sequencing pattern, much like many Midi "piano roll" based editing software.
In a nutshell I would like to do what the Windows program "Vixen" Christmas lighting control program does, but within Linux AND for videos. Sadly Vixen doesn't support syncing to video's at this time...only audio. Another thing is that Vixen also doesn't work with Wine, so it is a no go in Linux.
I would hope that by now there is some kind of video program that does permit syncing to external output devices.
View 1 Replies
View Related
Jul 7, 2010
I am running Ubuntu 10.04 and I am thinking of setting up a few X10 lights so that I can turn them on and off at certain times of day/night. I am not to concerned with turning stuff on and off via the web but that might be a nice option. I want to keep it as simple as possible. I have looked over the forums and web but I am not sure about how to start and keep it simple.
View 2 Replies
View Related
Feb 26, 2011
I have Toshiba satellite a655-s5170 and the LEDs on the satellite logo and touch-pad do not light up when I push the button that is supposed to toggle these lights. not a major problem but I would like to get the LEDs working if possible...
View 2 Replies
View Related
Apr 5, 2011
I've been an Ubuntu user for a couple of years. I have a Sony Vaio VPCCW-2S1E laptop, with an Nvidia GT330M graphics card. I had worked with Karmic, Lucid and Maverick on this laptop without any problems, until recently, when I had to re-install Maverick.
Now my laptop keeps freezing entirely (no response whatsoever), with two keyboard lights blinking. This happens randomly: sometimes I'm doing something, other times the laptop's completely idle. Sometimes the screen display turns off on freezing, other times not.
View 1 Replies
View Related
May 3, 2010
Where can i get linux drivers for my QHM 500 LM CAMERA (6 lights & microphone 500 K pixel).
View 3 Replies
View Related
Oct 27, 2010
I burned ubuntu-10.10-desktop-i386.iso with no problem, the installation start and i can choose the language (italian), select "Install" and.... it dies!
No viedo signal, keyboard has no more lights... nothing works but the pc is still power on.
My CPU is an AMD SEMPRON 2200+, 1gb ram, 250gb hdd with an nvidia graphic card.
View 1 Replies
View Related
May 4, 2011
I am having a lot of trouble with my computer... tried to upgrade to Ubuntu 11.04 on my computer, but the update crashed and then the keyboards lights just kept blinking. So I thought okay, I will try A fresh install. So I plugged up my old dinosaur and made a new boot cd. When I try to boot it, it shows that it is loading. But then the screen will go crazy, it will be a bunch of mashed boxes with funy colors sort off.can not get any responce out of it. So I try the boot cd in my old computer and everything works great.My computer specsare(custom):Motherboard = msi 785gm-e51 / 760gm-e51Cpu = AMD Phenom 2 duel core, running around 3.7 GHzRam = 2 gigs of ddr3Video card = GT240 galaxy...Geforce 200 series...An old wimpy 80 gig hardrive..Any ideas, I really like Ubuntu and usally have no problem that I can not Google myself out of but this time I can not find what I need.
View 1 Replies
View Related
May 3, 2010
Where can i get linux drivers for my QHM 500 LM CAMERA (with 6 lights & microphone 500 K pixel). i had been using windows for 12 years.
The full details of my webcam are on this link [url]
I could not find the linux drivers on this link [url]
View 3 Replies
View Related
Feb 5, 2010
I used to work with a PS/2 keyboard. But one key of it has a malfunction. So I bought a new Cherry USB Keyboard. GRUB and the BIOS like it - no doubt, the keyboard itself is OK. But as soon as SUSE 11.1 takes control during boot, the lights of the keyboard are switched off, and the keyboard is deactivated. I even tried to re-install 11.1 from DVD with the USB keyboard plugged in alone - in vain. With the PS/2 keyboard I didn't ever had any such problems. I run a system with a Pentium III (Katmai) on an Intel RC440BX Motherboard.
View 4 Replies
View Related
Feb 27, 2010
i had it on my laptop dualbooted with Win 7. win 7 sucked and couldnt get anything to work but ubuntu worked flawlessly. so i decied to try and delete win 7 and only have ubuntu.i just tired installing a new ubuntu and eraseing everything elase. i dont need anything on this computer.i made a live usb stick and i can get to the install screen i pick my languge and install. then it goes to the screen were i need to pick default launge and then answer some questoins before i install. but the probmlem is that i cant use my mouse or keybored there. caps and nub lock lights wont turn on
View 9 Replies
View Related
Jun 22, 2010
i am getting really pissed off with my new core i5 system I have a gigabyte p55m-ud2 mobo ([URL]) which's got a Realtek 8111D lan chipset it connected to my router after fresh install of ubun10 and then i installed MacOSX 10.6.3 and it worked there too then i came back to ubuntu and it didn't work anymore, after several restarts it was still not working until i took out the power cord and mobo battery, and reinstalled them back later which caused ethernet to work once again. but then after a while it started not to work anymore, which usually got fixed with a reboot. now this time i had ethernet working and i just resumed from screensaver and it stopped agian
there are no green or orange lights flashing at the back and when i take the cable out and reinsert it nothing comes on but with a shutdown they do come on i don't have this problem on the other harddisk which now has win7 and i some times manually change the sata cable to boot into windows and use itunes and some other stuff to load music to my iphone. I dont like to have dualboot and i dont like to use win7 either i just have it on the other hard disk just in case
is the manual switching of hard disk causing this to happen? why do i get it working with restart/shutdown and when i am using it fine it just decides to stop working after a resume from screensaver or sometimes for other reasons and why does none of this happen on win7 is there a way to reconfigure the ethernet drivers or other stuff without a reboot i am thinking it might be a problem with network manager or a bug or something network manager is really crappy and i used to use wicd until that started to do funky things ( like not connecting to hidden networks, launchpad Bug #473817)
View 2 Replies
View Related
Nov 16, 2010
I installed Fedora 13 some days back and been facing a weird network problem. on dmesg my NIC is showing Link up and Link down in alternate fashion. Even the lights on the port go on / off. this happens only for half hour once i start my pc, after that its fine.
View 2 Replies
View Related
Jul 2, 2010
I have a supported BCM4318 "EDUP" wireless card. I am very, very new to opensuse, 2 days old to be exact. However I can read, so I followed the instructions listed in the "Getting Your Wireless to Work" with no avail. It is really weird. I am using the network manager. When I right click on the tiny blue wireless bar down below I see both my network and my neighbors. I click on mine and it asks for my WEP key, I enter it and when I mouse over the icon it sayS that it is obtaining network address. If I click on it at this point it says activating. Then it says waiting for authorization. I have used the fwcutter to download the latest firmware. I have even used ndiswrapper to install from the Edup driver cd. No good! The other thing is, that I am running Ubuntu 9 on the same machine on the same network with the same card and it works.
View 3 Replies
View Related
Aug 24, 2010
I'm running a Poweredge 4400 with a 3com card and an intel card covered under e100.
I'm using centos 5.5 in its default server config coming from gentoo.
I have no link on either of the two interfaces, ever. The card initialises with ADDRCONF(NETDEV_UP): eth0: link is not ready and then falls back to half duplex but still with no connection.
I have manipulated most of the general settings that can be changed with ethtool.
Set to manual configuration with 100/full duplex
The cards are recognized alone and together. I have setup static interfaces with no problems. The ping to the local interface such that:
nic = 192.168.1.10
ping 192.168.1.10
we get back route times and all is well
ping 192.168.1.1
no route...
I have tried several different cables verified good other connections. I have verified the ports I am connecting to work correctly. I have manually shut down the onboard nic (in bios) and tried the 3com card alone. I have tried pci=routeirq, thinking there might be an irq issue.
If this was just the one card, I would install another and move on, but both nics are acting in exactly the same way.
View 1 Replies
View Related
Jun 10, 2010
How to make the modem lights toolbar addon to work? They don't seem to work while online with Gnomes KPPP, and it would be nice to see them working while online.
View 2 Replies
View Related
Aug 25, 2011
I have a very basic problem: My computer is attached to various light switches, central heating, powered windows etc. via RS232 and USB, using homemade custom logic boards. With this I can switch on and off lights, regulate room temperature, open windows etc. all by running some shell scripts on my system. I would now like to create a simple web frontend for this home automation.
What I want is a basic website with buttons, and when someone clicks a button on that website I want the webserver (apache ? ) to execute a script on the the server machine, triggering the rs232 hardware. The website is to be served by apache to make use of an existing structure. How (in what language) could I accomplish that? Javascript and Java are obviously out since they execute on the client, as far as I know PHP can't access the shell (which is probably a good thing), so what's left?
CGI? This will be deployed on an isolated private network secured the old-fashioned way (steel doors, guard dogs, landmines...), so I am not overly concerned about security, but of course it would be nice if the implementation offered at least some basic resistance to bored script kiddies...
View 3 Replies
View Related
Dec 19, 2009
I installed the new 9.12 cat drivers in the usual way (init 3; rpm -e the old drivers; generate new rpm; rpm -i new drivers; init 5), but instead of starting like I expected, I got a blank screen and what appeared to be a hard lock (keyboard lights don't toggle, Ctrl + Alt + Backspace and Ctrl + Alt + F1 don't do anything).
I switched back to radeonhd, but I'd like to get the proprietary drivers working if possible.
The usual listings
Code:
[nathan@ebisu ~] lsmod | grep fgl
fglrx 2323096 0
[nathan@ebisu ~] modprobe -l | grep fgl
extra/fglrx.ko
Looks like the driver loaded OK...
Code:
[nathan@ebisu ~] dmesg | grep fgl
code....
View 9 Replies
View Related
Sep 14, 2010
I have a HP Pavilion dv4 that is 4 months old. Yesterday it suddenly seemed to restart then once I logged in it turned off. When I tried to turn it on some of the lights came on and the caps lock and num lock started flashing. Since then I have not been able to get it to work correctly.It once seemed to turn on but died again after the login window.I tried to use my live cd but the same thing happened. It started loading once, but then shut down again. Every other time it stayed dead minus the lights
View 1 Replies
View Related
Oct 31, 2010
I am having a very annoying problem with my laptop.I am experiencing many freezes.When my laptop freezes, it shows the caps lock and scroll lock lights blinking.At first I thought it was a problem with flash (here is original thread: URL... )In the original thread, I thought the freeze's were being caused by the flashplayer, but it apparently isn't the case.The last time I experienced the freeze, I was playing around with the compiz desktop effects.
View 4 Replies
View Related
Oct 12, 2010
Ubuntu insists on using movie player as the default for audio files. I would like to use VLC. VLC doesn't show up on the list as preferred applications for multimedia. I tried using custom with vlc %u but it doesn't work.
View 3 Replies
View Related
Jan 28, 2010
I have a Dell 1525 and I just installed Ubuntu on it. The Multimedia keys (previous, stop, play/pause, next) and volume control keys (mute, increase, decrease) buttons aren't working at all. Is there anyway I can get them to work?
View 3 Replies
View Related
May 9, 2011
so i don't know what happened, but all multimedia files are suddenly speed up/and-or with no sound (ubuntu 11.04 with all recent updates, firefox 4, adobe flash-instick etc.)
if i try to play a flash movie on for instance videos it's sped-up with no sound, if i play an mp3 song (i use exaile) the bar is sped up and there's no sound either, if i start an avi movie (vlc) it's not sped up but there's no sound though.
when i log in to the system the logging in jingle is not playing, so basically the sound just got turned off for some reason but according to the soundbar it should be on.
this problem started just recently. i don't know if it has to do with recent updates or that my log in re-started a couple of times after using a kde program (kmess).
View 4 Replies
View Related
Mar 16, 2010
Is there any multimedia file format converter which can convert .mov to .flv on Ubuntu.
View 2 Replies
View Related
Mar 19, 2010
Is there a way to allow the multimedia keys to function while the system is locked?
View 2 Replies
View Related
Apr 11, 2010
Install multimedia plugin for browsers *and* keep firefox removed, is possible have such simple thing?
View 1 Replies
View Related
May 10, 2010
I set up up Ubuntu 10.04 Lucid on my desktop. Why can I not install multimedia support for common formats following the guide here?
I've added the medibuntu repo. I'm up to the part where it says "UBUNTU FAMILY 8.10 AND HIGHER USERS ONLY" and i'm following directions for "32-Bit Ubuntu Users". This is what I get when I paste the command in terminal:
[Code]...
It says "0 upgraded, 0 newly installed, 0 to remove", why am I being told this? If this guide is not for Lucid than what guide is?
View 9 Replies
View Related
Nov 18, 2010
I've built a script that should meet the requirements to pass the MMCHECK script written by J. McDaniels and RedDwarf. Save anywhere, call anything, and then (must be run as root):
chmod +x <nameOfFile>
./<nameOfFile> setup|remove
Code:
#!/bin/bash
function addRepo() {
[Code]...
View 2 Replies
View Related
Jan 8, 2011
Recently I installed MPlayer with its default gui and its interfaces SMPlayer and GnomeMPlayer. When I'm using GnomeMPlayer it responds to multimedia keys as configured in Gnome shortcuts, even if it's minimized or running in another virtual desktop. But it doesn't happen to the other two gui's mentioned above. I have also noticed that native Gnome applications or with Gnome support like Banshee and Rhythmbox rspond to multimedia keys even when the gui is closed and they are running only in the system tray. But it never occurs in non-Gnome applications like VLC, MPlayer and others. Jetaudio wich responds to these keys in MS Windows running under Wine doesn't even recognize them.
So I came to the conclusion that only native Gnome applications or with Gnome support recognize multimedia keys because, as it seems, they receive the signal from Gnome configurations. Others applications doesn't do so. Here is my question: Is there some way to make all applications recognize the configuration of Gnome multimedia keys shortcuts? (Of course it would not be fine if they recognized ALL Gnome shortcuts because they could conflict with shortcuts from another applications. The idela would be that they recognize ONLY Gnome multimedia shortcuts.)
View 4 Replies
View Related
