Ubuntu Multimedia :: Totem Video Blinks While Changing Volume In Ubuntu 10.04
May 8, 2010
I have fresh install (not upgrade) of Ubuntu 10.04. I have nVidia 8500GT VGA, drivers installed via System->Administration->Hardware drivers (ver. 195.36.15)Everything works fine, compiz too.But when I play the video in Totem movie player - in blinks ugly while changing volume directly via buttons on keyboard. It blinks in fullscreen and even in window. I did not have this in Ubuntu 9.10 - there it worked fine. What was changed? How to fix this? Interesting is that when I play it via mplayer - it is fine.
View 3 Replies
ADVERTISEMENT
Aug 31, 2010
As the title implies I can't use the fullscreen feature in a flash video because all the screen turns white &, wherever the pointer was, get noticed as a faint shadow. I can increase the screen only if using the keyboard shortcut <Ctl++> keys combination.Have Shockwave Flash 10.1.r82 add-on. Firefox version is 3.6.8. Ubuntu = 10.0.4 LTS.
View 3 Replies
View Related
May 30, 2011
this happens with both VLC and Totem, when in either of those programs playing a video, if I click on one of the top menus, say View in Totem, the video stays on top of the drop down options. In order to see the options I have to hover over them with the mouse at which point they become momentarily visible. I read a post somewhere where someone had a similar problem and it was solved by reinstalling Compiz, but I've tried uninstalling it entirely, reinstalling it, etc. and none of it works. It doesn't happen with flash videos in firefox, it does happen with visualisations in Totem, and it only started happening since I upgraded to 11.04.
View 4 Replies
View Related
Sep 21, 2010
Is there a plugin or a setting that I'm missing that would allow me to change volume using the scroll wheel instead of seeking? I usually use VLC for my videos but I would prefer to use Totem if possible.
View 2 Replies
View Related
Apr 18, 2010
Whenever I'm playing a video in Totem, if I use the navigation bar thing to go to a different time in the video, the video output freezes. Audio continues, but video stops. If I pause the video first, then use the navigation thing, then click play again, it works fine. Same happens for music; the visualizer freezes if I drag the navigation thing.
Edit: If I put it on repeat, when the video or music repeats the video output freezes also.
View 5 Replies
View Related
Sep 2, 2010
I'm having problems with VLC and totem.
View 9 Replies
View Related
Feb 10, 2010
My partner is a teacher and has downloaded some videos from a teacher's resource site but can't seem to play them in Ubuntu. They play fine in Windows XP using Windows Media Player but they only play a few seconds in VLC or Totem and then freeze. The files in question seem to be normal MPG (MPEG-1) video files but somehow VLC and Totem choke on them. I have installed all restricted video formats including w32codecs but still no joy. My partner is threatening to go back to Windows!
View 2 Replies
View Related
Oct 13, 2010
On 10.04 64-bit, I've been noticing this weird error where totem comes to a halt after ~3/4 of playback in a 30-45 minute video, then it starts to play back again after about 10 seconds but it's a bit choppier. What could be causing this or how I can track down the issue? I'm running a nVidia GTX 275 with nividia-current drivers (195.36.24) if that helps diagnose anything.
View 1 Replies
View Related
Dec 15, 2010
I just upgraded to Ubuntu 10.10 x64, and the colors in my videos are distorted. Blue seems to be the primary tint over everything. This problem occurs regardless of video format (avi, mkv, flv, etc) and regardless of video player I use (banshee, totem, vlc, etc). However, no other colors in my operating system are distorted; it's only for these movies. I also have an NVidia video card, which I installed the latest driver for through the restricted drivers pop up.
View 5 Replies
View Related
Feb 14, 2010
What do I need to play MPG Video. Totem Movie Player 2.26.1 Ubuntu 9.04
View 1 Replies
View Related
May 23, 2010
I installed 10.04 in a Dell Dimension 3000 for my father. It's a nice upgrade from the old Pentium 3, except for graphics it seems. I tried playing a video I recorded on my phone. Movie player(totem) appears to play the video, but instead shows a blank screen. Moving the window, minimizing, ect. shows a frame or two, but that's it. Converting to OGG, and turning off compix does nothing. I installed VLC and now the video plays but in slow motion. Sound works great in both. I'm not sure if it's an Intel graphics thing or what, but it's pretty bad when ..... plays better then local video.
BTW not sure if it's related but it also seems to have a problem coming out of suspend.
View 2 Replies
View Related
Sep 15, 2010
Sometimes for web TV one is offered a menu where the video is divided into sub chapters where you can jump right to this part of the video by clicking in a chapter menu (very similar to playing a DVD). Well, this does not work for me. Clicking a sub chapter only set the video to play from start, and sliding the bar only freezes the player with a white screen. I'm running 10.04 (64b), Firefox 3.6.9, with the latest Totem-plugin.
View 3 Replies
View Related
May 13, 2010
My parents have a 8 yr old computer, and they have been running linux for the last 2 years- our graphics card has been a nightmare. It has not worked right....since we first installed 7.10. In 9.04 it could still halfway play DVD's & videos (just barely). No longer in 10.04- Mplayer, totem, xine & VLC die when you try to play a video- any video.
And here's what I get(in terminal):
The program 'totem' received an X Window System error. This probably reflects a bug in the program. The error was 'BadAlloc (insufficient resources for operation)'. (Details: serial 89 error_code 11 request_code 132 minor_code 19). (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.)
View 1 Replies
View Related
Oct 9, 2010
When I try watching HD or avi files with totem the sound and video skips then equalizes on its own, when I try in vlc same thing but I play with the sound until video and sound sync but there is slowness in video.mplayer won't start. I installed the gmplayer front end and I just get that but no video or sound, video won't play.
View 4 Replies
View Related
Jul 21, 2011
I'm having trouble playing back videos from a DLNA device in Ubuntu 11.04, and I'm not sure where the problem lies.
Using the software manager I've installed the extra plugins package for Totem, and enabled the Coherence DLNA/UPNP plugin. I can see the device (Humax Freeview HD recorder) in the MediaServers list, and can browse through the programmes I've recorded on it. However, trying to play any of the has no effect, the main part of the window still shows the "clapperboard" graphic.
I noticed that the "recent files" filenames that were appearing on the Movie menu didn't match the ones that were listed in the sidebar - they're of the form e.g. 313.TS rather than the original descriptive name with a .ts extension. Running Totem from a shell prompt, I can see the following console output: request to play: Man on Earth_20110622_0508.ts 013311314 http://192.168.254.1:9000/web/media/313.TS I tried entering that URL into Firefox, and it started downloading okay; according to the LiveHTTPHeaders addon the response headers are
HTTP/1.1 200 OK
Transfer-Encoding: chunked
Server: HUMAX / MicroMediaServer
Accept-Range: bytes
Content-Type: video/ts
Content-Length: 1799258112
Pragma: no-cache
Cache-Control: no-cache
Why can't Totem play the file? Some other codec needed for video/ts files that I've not got installed? (it hasn't prompted me to install any extra packages) Does it just not like the fact the file extension is upper case? Or something else entirely?
On a separate machine, also running Ubuntu 11.04, I installed the VideoLan client; VLC can browse to the files and play them without any problem. So why can't Totem?
View 1 Replies
View Related
Apr 3, 2010
It seems to be able to play flash videos acquired from from video.google.com (ive only tried one) but NONE from ...... On other distros it will play ALL flash video from ANY source from the tmp directory perfectly fine.
Heres the original error
Search for suitable codec?
The required software to play this file is not installed. You need to install suitable codecs to play media files. Do you want to search for a codec that supports the selected file?
The search will also include software which is not officially supported.
(Cancel) (search)
View 3 Replies
View Related
Feb 12, 2011
I was wondering how you can change the music player that the volume task-bar applet uses? It's really starting to bug me now as I am sure I've seen the setting somewhere.
View 1 Replies
View Related
Jun 12, 2010
I'm still working on ubuntu 9.10 with an acer aspire 1810tz. To use my microphone I found out that I have to change my microphone settings because it's mono and the default setting is thinking it's stereo: With the Volume Controller I setup one chancel to 5 and the other to 90 and the mic is working fine. Starting Skype and using it I see that the setting is reducing the volume for the mic below 20, so nobody can hear me. I tried closing first Volume Controller and then starting Skype, no matter the volume of the mic is reduced. How do I stop this behavior?
View 2 Replies
View Related
Jan 6, 2010
script which adjusts my NVIDIA settings to HDMI and also my Audio output to my digital output. I feel its quite a lot of clicking to get my signal to my LCD.So I hope somebody already had this idea and can give me the script or can assist me in writing it myself. I think its not a complicated script. i guess its only 2 lines. But i am not exactly a pro in Ubuntu..So as i said i have a NVIDIA graphic cardand aplay -l shows
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
[code]...
View 1 Replies
View Related
May 1, 2010
am running uptodate Centos 5.4 Gnome.VLC is afterinstalled.i do have problems with Totem.some websites i visit offer streaming video.when i do start the video on those sites, a warning comes up:> Totem could not play mns://<filename>.wmva microsoft media server protocol source plugin is required to play this stream, but is not installed <when i do copy/paste the line after 'mns' to VLC media > open network VLC starts playing (which is fine in itself)as Totem refuses too to play mp4 files present on my computer (due to missing codec) (not a problem in VLC) i would like to switch to VLC Q: how can i make VLC the default player that comes up when playing videostreams?additional: how can i save a stream that VLC is playing to my own machine (for future use)?
View 4 Replies
View Related
Jan 27, 2010
i have movie player (totem) and as an alternate vlc. both will play store bought encrypted dvds very well etc. however, movie player when on "videos" for instance will frequently flag the search operation with one/ two of the following:
"error looking up uri/ cannot resolve host name" or
"error looking up video uri"
automount failed: mount point for
org.gtk.vfs; mountpoint.http already running" or
"an error occurred location not found"
it is difficult to clear and unstick these red flags. audio from rhythmbox music player is awesome. what dependent file or plug-in am i lacking or need to delete?
View 3 Replies
View Related
Oct 15, 2010
Thought I would post this up here, because I've been searching for a solution, and not found one online:Problem description When playing both .mp4 and .rm files, the sound played fine, but the display remained black.
Solution Open the Configuration Editor (run gconf-editor in the terminal). Navigate to system > gstreamer > 0.10 > default, double-click on videosink and change the setting from autovideosink to ximagesink
View 1 Replies
View Related
Jul 12, 2010
Since I upgraded to Lucid Lynx, playing videos with the default player do not work properly. I only see the content while moving the window, or in full screen mode, and in both ways, the picture is distorsioned and with strange colors. Playing it with VLC does work properly ONLY IF I change the video output module to something different as default (X11 works, openGL also) but Linux Framebuffer does not.
The question: Is there a way to change the "default" video mode that Totem (or Kaffeine) use?? I have not found anything on the net with this exact problem.
View 6 Replies
View Related
Apr 24, 2010
I want to edit my volume meter so that way i can change my volume but be more precise about it. I mean if i slightly slide my finger a little bit it goes from to mute to all the way up. (I have a touchpad buttons)
View 2 Replies
View Related
Oct 4, 2010
(Ubuntu 10.04) I would like to change to change the ownership of one of my storage partitions from root to dad - I am currently reading through as much Ubuntu documentation as I can but the process is slow. If I gksudo nautilus and select the drive, right click/properties/Permissions the owner is set to root. If I try to change the group ownership from root to dad it looks like it momentarily does it but it stays at root.
using Pysdm as a gui for fstab - but so far I have only found out how to allow other users to mount the volume not own it. My fstab entry for this volume reads as /dev/sdb6 /media/backuphd2 ntfs-3g group=dad,users,user,owner 0 0 - it looks to me that in terms of ownership, root = 0 0 Can I find out what the ownership of dad is in terms of numbers (e.g. owner 0 1 or owner 1 1) and then change the fstab entry?
View 5 Replies
View Related
Oct 29, 2010
I've got my xubuntu 10.10 install just about perfect on a little acer aspire d250, apart from a small sound useability issue: In the interests of simplicity and resource usage I removed pulseaudio. After a bit of fiddling I got it so that my USB soundcard (ProDac) is recognized and automatically set as the default soundcard when plugged in. Any sound applications automatically use the USB sound if it present, no need to around with pulse. The only problem is that my netbook's volume control keys still only control the master volume of the inbuilt soundcard, and have no effect on the usb sound. Does anyone know of a way to change which sound device these keys actually effect? I'd like to write a little script so that when the usb device is detected the keys are remapped.
View 1 Replies
View Related
Mar 7, 2011
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
View 1 Replies
View Related
Mar 24, 2011
I used Ubuntu 10.10 (64 bit) on IMac i7. As far as, I remember, after installing Pulse-Audio Equalizer, for each restart of the system, after login screen, system sets volume to maximum value. What can I do?
View 1 Replies
View Related
Jun 12, 2010
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
View 6 Replies
View Related
Oct 31, 2010
I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
View 2 Replies
View Related
