Ubuntu Multimedia :: Running Exaile And Play Music Through Jack
Oct 2, 2010Trying to run Exaile and play music with it through Jack and I get this message: 'The autoaudiosink is missing'. What should I do?
View 2 RepliesTrying to run Exaile and play music with it through Jack and I get this message: 'The autoaudiosink is missing'. What should I do?
View 2 RepliesMy green audio output jack is broken, under Windows 7 I used to reroute my audio to the red microphone jack, so I could listen to music with headphones through the microphone jack. It took me some simple mouse clicks.
How to do this in Ubuntu 10.10? I haven't find anything useful for days for this particular problem.
Suse 11.3 64bit - KDE 4.4.4. What gstreamer plugin do I need to play .wma files in Exaile 0.3.2.0?
View 4 Replies View RelatedHow can I get Firefox (and other pulseaudio-using programs) to play while I have jack running? Is there a way to make pulseaudio run through jack? I'm running ubuntu and puredyne distros.
View 1 Replies View RelatedI have no sound after upgrading to 11.04. Sound control panel and test speakers emits no sound. The new music player won't play sounds from music CDs either.
ALSA info is at: [url]
when I try to play music on amarok it just won't play, it just loads lyrics and then, nothing. on rytmbox everthing works fine but amarok don't work.
View 9 Replies View RelatedI have Ubuntu 10.10 running on a laptop.When I connect the laptop to an external amp and speakers I can play ogg/mp3 files and hear system audio.When I just Jack (midi keyboard plugged in) I get the sound via the laptop speakers but when I try connecting to the amp as described above I don't get any sound.
View 3 Replies View RelatedIdeally, I would be able to have Jack (for supercollider) coexisting happily with other apps that use the audio system, specifically --
Rhythmbox (yes, there are other players but this one interfaces cleanly with my iPod) Oracle virtualbox (which I use for NaturallySpeaking)
The typical recommendation around the web is to configure ALSA to pipe its audio through Jack, which I tried according to [URL]. With that .asoundrc, I could choose ALSA as the driver for VLC and it output okay. But I'm not sure how to tell rhythm box to use ALSA instead of pulse audio. Worse, when I changed my virtual machine's configuration for ALSA (instead of the default pulse audio), the audio connection died -- the alsa ports disappeared from qjackctl's Connections window, and NaturallySpeaking didn't pick up any audio. This is fairly serious because I depend on dictation software to deal with an RSI (dictating English, not code of course) and I'd rather not have to stop Jack just to dictate something.
Rhythm box and virtual box both work perfectly with pulse audio connecting directly to the hardware. In the past, I've gotten pulse audio to route through Jack but it's dicey -- xruns are common and sometimes the audio gets choppy.
What next? I suppose getting the ALSA configuration right is the best thing, but early tests were not exactly encouraging.
(edit) PS I'm using virtualbox for DNS because wine failed me. Completely Plus wine's jack option for audio IO did not work with NS at all. NS works really well in virtualbox so I'm keeping that one.
I am looking for the music database files for Exaile 0.3.0.1 on Karmic Koala. Various posts on the web mentioned ~/.exaile/music.db or /usr/share/exaile/music.db, but there is no database file at either of those locations.
View 1 Replies View RelatedI have lucid and jack almost the way I want. I can't get apps like flash (in firefox) and rhythmbox to run through JACK. I've followed some outdated guides on the forums here, but I haven't had any luck.
I set up gstreamer to use jackaudiosink, but no luck.
If you ask me, JACK + ALSA should be the default, with maybe a simplified or automated control system for people who don't want to exploit their might
I hate having to close up a massive JACK patch just to watch a quick movie, or having to close Pidgin so JACK will start.
Muse will not make sound. The jack server is running, but not from the terminal. I can only get it to run with the Jack control. But it IS running. And still, I hear no sound from muse.Muse is connected to the system in the connection window.So, whats the problem?
View 3 Replies View RelatedI have installed ubunto on an old PC with minimal hardware resources. I cannot play or even see a music cd. I go to places-computer- and see the floppy drive, files system hard drive, and the cd drive. When I insert the music cd the cd drive disappears. It sees a data cd just fine.
View 3 Replies View RelatedI can't get jack working
soundcard chipset: EMU10k1X
Here Qjackctl log:
Code:
p, li { white-space: pre-wrap; } JACK server starting in non-realtime mode
Cannot lock down memory area (Cannot allocate memory)
control device hw:0
control device hw:0
audio_reservation_init
Acquire audio card Audio0 .....
jack server is not running or cannot be started
already added
@audio - rtprio 99
@audio - memlock unlimited
@audio - nice -19
to
/etc/security/limits.conf
I am member of audio group. Realtime option unchecked. I also reinstalled ubuntu in a fresh install and the same problem.
I have a rather strange problem and it surfaced just recently. Most likely it has something to do with switching from Ubuntu 10.04 to Ubuntu 10.10.
When I upload music to my iPhone 3gs with iOS 3.1.3 (7E1 it shows in iTunes, however the phone skips over the music. This does not happen to songs I uploaded via rhythmbox two weeks ago.
For a test purposes I deleted the old songs from the iPhone and tried to put them on again. Now I cannot listen to them as well. At least I know it has nothing to do with the used mp3 coding.
I even can use the iPhone as a harddrive for that music and play music from their through rhythmbox.
The song list shows the right sizes on the iPhone.
It is save to say that the data is transfered and the music database is updated. So there must be a strange error in detecting the length of the songs which would point to a problem in updating the iPhone database. However, I cannot be sure, because the phone is not reporting any errors.
How would i be able to do that if possible?
View 1 Replies View RelatedI have a desktop pc with ubuntu 10.10 which is connected to my hifi installation. With my laptop i login with "ssh -X" to the desktop pc and start banshee to play music stored on the desktop pc. (the banshee userinterface is shown on the laptop and the sound goes to the hifi installation) This works only when there is a monitor connected to the desktop pc, when i disconnect the monitor the sound is gone. Is there a way to play music without the monitor ?
View 8 Replies View RelatedI have seen already many post about my same problem but the suggestions have not been enough in my case .
I have Ubuntu 10.10, I run spotify through wine, but i receive the message saying can't play the music. I already ticked only ALSA, only OSS, both, I followed the other instructions for the audio tab ( Emulation, 44100 and 16 ), I reinstalled it as well, but nothing to do.
I have a NAS set up (ubuntu server 10.04) which contains all my music. But when I play music from it, I can not see how long the song is and I can not skip to a specific time in the song. When I play video, all works well.
View 2 Replies View RelatedHow To Play Mp3 Musics On Open Suse 11.0 Or Does Open Suse Have Another Type To Play Musics?
View 1 Replies View RelatedI tried to play a music file w/ rhythmbox, but it needed a plug-in. When I searched for it, there was none to be found. I need to know how to install plug-ins in order to play my mp3's and movies.
View 4 Replies View RelatedI want to play a music cd straight from the dvd rom but rhythmbox nor vlc will do it. Am I missing something? I can rip it and play it but not straight listen to it. I can watch dvd's but not listen to cd.
View 4 Replies View RelatedWhat is a simple music player that will play cd's in Xubuntu 8.04?Movie player comes up when i put in a cd, but gives an error messege...
View 1 Replies View Relatedhow can i run WMA music play list. do i need any plug-in or any software.
View 1 Replies View RelatedI upgraded to KDE 4.4.3 this morning, but after that Amarok (with Xine backend) does not play music any more - track is progressed, but only silence comes out of the speakers. I tried Gnome music players too, but none of them plays anything.
I installed GStreamer with different kinds of plugins and switched Phono backend to gstreamer. When I start Amarok now, it says I have no MP3 support, so it has to be installed. It does it, restarts itself and it can play audio again. After restarting, having no MP3 support is reported again.
What I am trying to do: I am trying to use my G1 Android Phone as a remote to control my netbook playing music in my bedroom, My net book is playing music from my server using DAAP + Rythmbox. That part is done. The part I can't make work is the Andromote App on my phone controlling when the netbook plays, pause, next, prev, & volume.
What I am using: I am running Ubuntu 9.04 both on my server as well as my netbook (netbook has the netbook interface) I am running a rooted version of Android 1.6. The programs I am trying to use are Rythmbox on my netbook and Andromote on my G1.
i installed ubuntu 10.04 on my desktop pc. I previously used 8.10 without any problems. Now I have a problem with amarok. I can't play any music at all. i tried to find what the problem was but i don't seem to succeed so far.
View 1 Replies View RelatedI have noticed that when I import my music folder, it never had all the albums I have. So, when I looked, I noticed that all the songs that were not imported had the wma file extension. MP3 is fine, I did have problems with that last time.
I have a lot of good songs encoded with wma. So, how do I get Rhythmbox to play these wma sound files? I have done some searching, but it does not seem to work. I have tried using gstreamer-0.10-plugins-ugly and multiverse. I even did a restart, which was not really necessary as it has nothing to do with hardware.
I am running the default Gnome 3 Fedora distribution with Exaile installed in the place of the default media player. When I restart Exaile gives error that the resource is not found. However I can open and play a file with VLC media player, and afterwards exaile works just fine. I have installed a program call Fedoraplus and used the option to install most codecs, when everything is working I can play just about anything.
View 2 Replies View RelatedI have moc running well in Debian 6. However, I cannot get moc to playback music via my USB DAC card, it only plays back through my soundcard. I use ALSA for playback.Is there any way that I can configure moc to play music through my DAC card as I do through Audacious?
View 7 Replies View RelatedMy wife and I each have 32 bit machines with two media drives and we're running Debian Squeeze with KDE4. If either of us put a commercial music CD in our primary drive (it's a CDROM drive on mine and an LG Super Multi drive on hers) Squeeze sees the music CD but can't play it. If either of us put a music CD in the secondary drive (Panasonic DVD/CD R/RW on mine and another LG Super Multi on hers) Squeeze sees the CD and KsCD plays it just fine however she can't see the files on the CD (in Dolphin) on her machine (though she can see the folders) while I can see the files just fine. My machine is a 1.8 GHz Athlon with 750 MB of RAM. Her's is a 2.4 GHz, triple core, Athlon II machine with 4 GB of RAM. Both are running pure Debian with no customizations.
View 10 Replies View Related