Fedora Hardware :: NVidia Corporation C73 [ GeForce 7100 / NForce 620i ]?

Sep 9, 2010

I am just getting into fedora and have installed it on an EMachine ET 1810. According to my SMOLT info, I have the above Video card. (my smolt info is in my signature). I had installed a couple of games that require 3d drivers in order for the game to play! but I can't find any.

View 3 Replies


Ubuntu Multimedia :: Screen Resolution Stuck At 1024x768 - NVidia GeForce 7100

Sep 16, 2010

I am stuck at 1024x768 in Ubuntu 10.04 with the nVidia GeForce 7100. I installed the drivers suggested by nVidia on their website, but it doesn't seem to heighten my resolution any. 1024x768 is the highest which appears in nVidia X Server Settings.

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder101) Fri Aug 27 21:34:01 PDT 2010
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Configured Keyboard" "CoreKeyboard"

Is there a way to fix this without having to buy a new card? I've read that the GeForce 7100 is pretty crappy, but I've got no money to space at the moment.

View 9 Replies View Related

Ubuntu :: Nvidia GeForce 6150SE NForce W/ Natty?

May 1, 2011

I first started having problems on 10.10 a few days ago. Just boots to a command prompt. After troubleshooting, I found when I remove xorg.conf gnome starts up. Under System>Preferences>Monitors shows my correct Monitor model and resolution.

The resolution displays properly, 1680x1050, but without Nvidia and Graphic acceleration, I can't run my Compiz effects or XBMC. I'm having the exact same issues with 11.04. I ran nvidia-xconfig as root to get an auto gen xorg.conf. No change. GeForce 6150SE nForce 430 integrated graphics card


View 7 Replies View Related

Hardware :: Using Geforce 6150 Nforce 430 And NVidia-drivers 196.*?

Jul 20, 2010

I used the videocard Geforce 6150 nforce 430 (NV4C) without problems untill the upgrade to kernel > 2.6.32 and nvidia-drivers > 190.*. After the upgrade I can use only nv and vesa in the Gentoo x86_64 and in the Fedora 13 x86_64. When I try to install Geforce 8800 GT everything becomes good with free nvidia-drivers and with proprietary ones in both distributions. use this videocard with the kernel 2.6.33(34)* and nvidia-drivers 196.* ?

View 2 Replies View Related

OpenSUSE Hardware :: No HDMI Audio On NVidia GeForce / NForce IGPU On Mb ASUS P5N7A-VM 11.2 Or 11.3?

Aug 6, 2010

I have an ASUS P5N7A-VM motherboard and was using Optical out for sound without issues running OpenSuse 11.2. I then got rid of my receiver and wanted to just use HDMI sound. I couldn't get it to work so I upgraded to OpenSuse 11.3. I simply went to the Sound control panel applet and changed it to Internal Audio Digital Stereo (HDMI). I can not get any sound from it on OpenSuse 11.3 either. I have ran sound tests from the command line "speaker-test -Dplug:front -c2 -l5 -twav" which all run without errors, but nothing comes out of the speakers. I have ran the suggestion of one post "alsa-info.sh" and here are my results:

http://www.alsa-project.org/db/?f=27...860267e7079411. I have also tried the following post which did not resolve the problem since it seems to be Ubuntu based. I have undid everything from the post as well to make sure I don't stray to far from normal.

[HOWTO] HDMI audio on nVidia GeForce/nForce iGPU - XBMC Community Forum

View 9 Replies View Related

OpenSUSE Install :: NVIDIA NForce 590 SLI Installation Halts?

Dec 8, 2010

I would like to build up a multi boot system with 11.3 on ASUS M2N32 WS motherboard inclusive NVIDIA nForce 590 SLI RAID controller and Marwell 88SE614xSATA connectors.The problem is that if I built up the RAID-1 arrays (2x500, 2x1000) it cannot be seen from Suse install. As far as I investigated the nForce driver is in 11.3, but in this case why the installation hangs (no reset button, only power off). Sorry I cannot provide you a log, becuase the installation procedure goes to the restart, the system restarts, and Grube says error 15 or 21.

View 2 Replies View Related

General :: NVidia Nforce Ethernet Card Not Detected In RHEL 5

Jun 8, 2010

I use an nVidia nforce MCP73 ethernet card on Red Hat Enterprise Linux. It is not getting detected and hence I'm unable to configure my network.

View 14 Replies View Related

Fedora :: Nvidia Geforce Go 7400 Cannot Enable On 12

Mar 8, 2010

i using sony vaio sz440 t5500 and installed fedora 12,but it cannot enable 3D on fc 12

lspci | less
01:00.0 VGA compatible controller: nVidia Corporation G72M [GeForce Go 7400] (rev a1)

View 4 Replies View Related

Fedora Installation :: NVIDIA GeForce 9300m GS Compatability?

Feb 19, 2009

Forgive me if this was already posted but I couldn't find it. I am attempting to install F10 on my Acer Aspier 8730-6031, but I have video drive compatibility issues with my 9300m. Does anyone know of any drivers for this card or any fixes?

View 2 Replies View Related

Fedora :: Updating Nvidia Geforce 6800 Drivers?

Mar 25, 2010

I want to install the proper drivers for my system .the drivers are here: [URL] and come in a .run format (archive format I guess?) Anyway. If someone has done this with these drivers or other nvidia drivers and has some advice. Please, I'd really rather NOT end up screwing up my system or end up accomplishing nothing at all because I did it wrong.

View 1 Replies View Related

Fedora Hardware :: NVIDIA 195.36.24 Does Not Work With GeForce GTX280 On F13

May 28, 2010

I just installed F13, congrats to the community for the awesome work - everything worked straight out of the box .

Unfortunately, I need to install the proprietary NVIDIA driver for my job (CUDA stuff). I first installed F13 + kmod-nvidia from Fusion on a machine with a GeForce 7200GS, and everything works ok (after turning nouveau off).

Then, I proceeded to update another machine featuring a GeForce GTX280 (again, nouveau blacklisted). The install was apparently successful, but X turned out to be extremely unstable and always crashes a few seconds into the session, either by leaving a blinking screen or by causing the machine to reboot. Thinking that some file might have ended up corrupted, I reinstalled F13 and tried nvidia-graphics from ATrpms. The result was the same: computer hanging a few seconds into the X session. Finally, I installed from the NVIDIA sh package, and again same outcome .

The card is most likely ok because I ran it with F10 till yesterday flawlessly, so I can only guess that it is the new version of the driver coming broken from NVIDIA. I tried installing version 185.18.36 but it cannot figure out the version of my kernel headers, and the legacy versions available from the repos do not support the GTX 280, so I cannot be positive about version 195.36.24 being bugged.

Both machines are x86_64 (a Phenom II and a Core i7). Especially, does anyone know how I could get version 185.18.36 to run on F13?

View 14 Replies View Related

Fedora :: Can't Install The Drivers For Nvidia Geforce Gt 240m

Jun 16, 2010

I was following this guide to install my nvidia drivers...[URL] but when I got to the step about checking to see if my card is supported I'm to check here...[URL] I don't see my card anywhere in this list So I kept reading and found this posting ... [URL] and it says that it is support under the geforce 200 ... The last time that I installed this driver my X session quit working ... I was able to ssh back into the laptop and undo the driver install so now i'm a little gun shy about trying it again...

View 11 Replies View Related

Fedora Installation :: Install From Live CD With Nvidia Geforce 7150M?

Mar 17, 2009

Fedora Core 8 did not recognize my Geforce 7150M display adapter (in a HP DV6000 laptop), neither did Fedora Core 10 I tried yesterday although this laptop is now already over one year old (I have used Vista because it works out of the box but it sucks as you might have guessed). That could be something I'd like to complain about but I choose not to, I simply want to know how to install Fedora 10 from a live CD (that is all I have now, no DVDs and not too much cash to buy some..) Live CD boots and I can access command line. If I have understood correctly, Nvidia proprietary driver supports my display adapter but it is not included in live cd so I could use X after installation. Problem is that I don't know how to successfully run the installer from text mode. I tried to execute 'anaconda' but it cannot find packages to install when it comes to that. There seem to be no instructions how to install from a live CD that I could find using Google. For sure someone knows what command to execute to begin installation?

View 2 Replies View Related

Fedora :: Can't Drive Nvidia GeForce 8200 Chipset For FC12?

Dec 2, 2009

I am a recruit for Linux and install FC12 on my PC. The motherboard is ASUS M3N78-CM. The nvidia GeForce 8200 chipset on the motherboard is directlt used for vedio. The driver : NVIDIA-Linux-x86_64-190.42-pkg2.run is downloaded from Nvidia website, but it can't drive the chipset successfully. So i can not start X-window. If anyone has a solution to this problem?

View 3 Replies View Related

Fedora :: Nvidia (GeForce Go 7900 GTX) Driver Install Ok But No GLX Visual

Feb 11, 2010

I've enjoyed accelerated 3d graphics for years with this laptop, but since moving from CentOS 5.3 to FC12 I have had no 3d or opengl working at all.My install seems good. I'm running right now with the 'nvidia' driver in 1920x1200 res with no real problems except the lack of 3d. I have just finished trawling the forums again, coming back to: F12,F11 & F10 Nvidia driver guides [URL] I uninstalled all my nvidia packages, re-installed only "kmod-nvidia xorg-x11-drv-nvidia-libs.i686" and dependencies, ensured 'nvidia' was my selected driver in xorg.conf (using nvidia-config-display disable, then enable), and rebooted, and still no joy. No errors in Xorg.0.log. My 'glx' extension is loaded. 'nouveau' is rdblacklisted. SELinux is disabled. I have 3Gb RAM and so have chosen not to use the PAE kernel or modules.


[neek@uberneek ~]$ glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig


View 4 Replies View Related

Fedora Hardware :: Nvidia Geforce 4 - OpenGL Support For ATI Card?

Nov 12, 2010

My friend just recently gave me an Nvidea Geforce 4 64mb, and it is supposed to be better than my ATI x700 Pro. I was wondering if there was openGL support for this card, and how do i replace it with my ATI card?

View 1 Replies View Related

Fedora Hardware :: Nvidia GeForce 310/GT218 Fan Control Support?

Dec 18, 2010

I am running a FC14 x64 on a desktop which has a nvidia GeForce310 aka GT218 card which is being supported by the in kernel nouveau driver.

The kernel/syslog reports:


When Fedora 14 boots, I can hear the nvidia GPU fan spin up to its max rate.

With Windows on this same machine, the same fan starts at the same rate but drops to a lower (and less noisy rate) so we know there is graphics card supports fan control.

Does anyone know if its possible to set the nvidia's fan speed via the nouveau (or other) driver/util?

I have looked at nvclock (0.8b4 being the most recent I could find) but running this reports that the card isn't supported, although it reportedly supports the NV5x backend.

View 2 Replies View Related

Fedora Hardware :: Can't Install NVidia GeForce FX5900 Driver

Jan 15, 2011

I tried to install the driver '01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900] (rev a1)' watching Fedora Solved → Video Solutions → Installing the Drivers as Provided by nVidia "Installing the Drivers as Provided by nVidia" ,and FedoraForum.org > Fedora Support > But I failed.

Error log*********************************************** ********************
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Jan 15 12:52:09 2011


I typed "su -l" and telinit 3. But "ERROR: You appear to be running an X server" is written. What I can install this driver as well? or how I can booting up the Fedora 14 in text mode?

View 5 Replies View Related

Fedora Hardware :: NVidia GeForce 310m - Use Card In Conjunction With 14?

Feb 17, 2011

Is there anything special I need to do to use this card in conjunction with Fedora 14? It's been acting a little strange lately. Also I think the card may have some type of 3D support although I'm not entirely sure on that.

View 1 Replies View Related

Hardware :: Unable To Use NVidia Driver For GeForce 9200 In Fedora 13

Sep 29, 2010

In Fedora 13 with the kernel version of, the NVidia driver of the version 256.53 was installed from rpmfusion repository. Everything works fine except for one problem: the brightness cannot be controlled from the power management programs in either KDE or Gnome. In Gnome, the scroll bar of brightness disappears, and, in KDE, the scroll bar cannot be dragged.

Since the computer with Fedora 13 and NVidia driver installed is Dell Studio One 19 (All-in-One computer) which has no hardware buttons to control screen display options at all, there is no other way to adjust the brightness of computer screen. The BIOS of the computer doesn't include an option to adjust screen brightness either. Since screen brightness is set at the maximum level when the computer is turned on, it is not possible to continue using the computer for a continuous period of time due to eyesight protection. Strangely enough, both the Nouveau driver included in xorg-x11-drv-nouveau 0.0.16-8.20100423git13c1043 from Xorg 7.4 and the driver included in the mesa-dri-drivers-experimental 7.8.1 support brightness adjustment without any glitches.

View 4 Replies View Related

Fedora Hardware :: NVidia GeForce FX 5500 KMOD - After Reboot Get A Flashing

Feb 16, 2010

I have installed kmod-nvidia-173xx and done everything your guide says [URL], but after reboot I get a flashing _ . What can I do? nVidia has always been a pain to me on my obsolete graphics card.

View 14 Replies View Related

Hardware :: Nvidia GeForce G 105m And Fedora - Edit Xorg.conf?

Jan 16, 2010

i have a lenovo g550 with nvidia geforce g 105m i tried to install its driver on fedora 11 and 12 and i have followed the instructions of setup as in fedora sites and forums, the problem is after installation i have 6 equal screens 640*320 and i don't know how to edit xorg.conf

View 4 Replies View Related

OpenSUSE Hardware :: NVIDIA GeForce GT 325M And NVIDIA Optimus Support?

Apr 3, 2011

I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.

nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?

View 1 Replies View Related

Fedora Hardware :: GeForce 9600M GT, Nvidia-settings Does Not Detect LG E2250V Resolutions?

Feb 3, 2011

I just bought an LG E2250V Monitor that I'm connecting to my laptop with the VGA port, my laptop is equipped with the cardCode:01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GT] (rev a1)However nvidia-setting is able to detect resolution only up to 1024x768, I can't get higher than that, and it doesn't even display the monitors name.Information:

Operating System: Linux
NVIDIA Driver Version: 260.19.29
Server Version Number: 11.0


View 4 Replies View Related

Fedora Hardware :: 15 Nvidia GeForce Go 7400 Gnome 3 Shell Hang On Login

Jul 12, 2011

I've seen a lot of posts related to problems with GNOME 3 shell and nvidia drivers but I have yet to find anything that seems to fix my problem. At this point, the laptop, a Dell D850, boots just fine all the way to the gdm login screen. When I log in, the background and menus initialize and the mouse can be moved around, but nothing works---I can't click on anything, Alt-F1 does nothing, and I have to switch to a VT and shut-down X. I've uninstalled all things nvidia and now I have a working laptop, so long as I use Classic with Compiz.

I upgraded two other hosts, but both had ATI graphics cards; they worked without a hitch. I'm regretting having decided to upgrade this laptop

View 2 Replies View Related

Fedora :: NVidia GeForce FX 5500 - Resolution Degraded To 640x320 - Cannot Edit Xorg.config

Feb 11, 2009

There I had legacy driver from nVidia but resolution was degraded to 640x320 and in their version 8.10 I cannot edit xorg.config (there was not anythig about resolution) I hoped in fedora i`ll fix this.

View 6 Replies View Related

Fedora Hardware :: Install F13 64 Bit Get No X Windows But Do Get Text - Video Is NVidia Geforce GT 8 360M With 1gb Vram

Aug 11, 2010

When trying to install Fedora 13 64 bit, I get no X windows but do get text.Video is nVidia Geforce GT 8 360M with 1gb vram. the Live DVD I get a checker board display.

View 7 Replies View Related

Fedora Hardware :: Setup Nvidia On Geforce 5700LE - Monitor Doesn't Support Screen Resolution

May 13, 2010

First off, let me say: I'm a long time Linux hobbyist and recently installed Fedora 12. I've been looking (some say "lurking") around these forums for a bit after I loaded it up and let me say: Leigh, You're an amazing young man! Keep up the great work! I've a question: I've just put together a hobby computer: Pentuim 4, with 1 Gig of RAM and a Nvidia Geforce5700LE. When I install Fedora from a fresh install, everything works great: nice screen resolution, good graphics, etc. but no 3d or acceleration, so I'm very limited on my programs.

So I decided I need to upgrade my Nvidia driver. I followed Leigh's Nvidia setup guide after installing Fedora 12 (all four steps!) everything seemed to go fine, but when I reboot, I quickly see the Nvidia splash screen, but the screen then goes blank. Well, not really blank, I can see what appears to be a kind of cross-hatch pattern, plus I can see what should be my mouse cursor on screen (it also is a square shaped pattern). I suspect it may be at a screen resolution that my monitor doesn't support. Once there, the computer pretty much doesn't do anything else. Usually I can break into the x driver loading and go to the command prompt, but this latest time I can't even do that.

View 10 Replies View Related

CentOS 5 Hardware :: Sound Card Not Detected (nVidia Corporation MCP61)

Jun 13, 2010

how to detected sound card or drivers.when i am trying to detect sound card by using command system-config-soundcard it gives output on gui mode (Audio Configuration) but there is nothing show on PCM device. System Configuration which i am using.

#uname -a
Linux *** 2.6.18-8.el5 #1 SMP Thu Mar 15 19:46:53 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)


View 3 Replies View Related

CentOS 5 Networking :: NVidia Corporation MCP79 Ethernet Card Not Detected In MAC Mini?

Feb 26, 2010

I have installed trixbox in Intel MAC mini PC, installation completed successfully. After reboot network card was not detected.

My MAC mini PC comes with nVidia Corporation MCP79 Ethernet card. how to enable Ethernet card with out affecting the tribox. trixbox- version comes with Cent OS 5.4. [Moderator edit: s/deducted/detected/]

View 5 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved