I have a tuner card, called the Genius TVGo A11, it uses the SAA7130 chipset.
The problem is, it's not in the CARDLIST.saa7134 list
How can I get it working?
Using Ubuntu 9.10...
I have a Dell optiplex GX260, 2.4ghz speed, 512 ram,40gb hard disk. I have installed two operating systems XP and ubuntu 9.10. My problem is getting the new Tv card to work with ubuntu. With xp it works with no problem. I tried to download prgrams like tvtime and xawtv but all amounted to nothing. tvtime fails even to launch while xawtv launches and hangs the computer and nothing responds. I have to manually shut it down using the power button. I did run the Command ( sudo dmesg) to extract some info that I thought might help and is pasted below.
[ 15.817800] Linux video capture interface: v2.00
[ 18.680474] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 18.680565] saa7134 0000:01:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[code].....
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
I have two sound card ;
1) Motherboard card (00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
2) C-Media : Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
I want to use headphone and speakers at the same time.
I have to reboot every time I put a different sd card in.After I take the first one out the built in reader in my Dell monitor sdf1 still has those first photos in it no matter how many other cards I put in.
View 1 Replies View RelatedI just want to know from an out of the box no configuration experience what's the most compatible, hassle free sound card that you can purchase from newegg?I'm building a new AMD type system w/ an 890GX chipset and this is the last component of my build that needs to be verified.
View 6 Replies View RelatedIve just installed a fresh 10.04, and my Xfi- Xtreme Music card isnt showing up ion the sound options.Ive tried installing the latest alsa using the script thing, and its still not showing up.
View 4 Replies View RelatedI'm looking to replace my video card...
From what I can tell (From Looking at forums)
Nvidia is the way to go with Ubuntu
Just want to double check that, since the newest post I found was a couple years old.
The video card I have now should be more than good enough for me.
All I do is watch videos and brows online.
But videos and desktop effects are both very choppy.
I realize that if I take the time, I can probably get my card to work well, but I just don't have the time.
Looking for a new card between $100-$150 that will work perfect right out of the box.
After a post on the wine forums came to the discovery that my ATI radeon 4850 graphics card is causing much trouble in my ubuntu machine because of the lack of support. And because of that I cannot play my favorite games through wine. So now I'm saving some money to buy a new graphic card. A nvidia this time.
Now I don't know all that much about graphic cards, but I am looking for a card that works well on ubuntu that equals the performance of my old 4850 and fits my P5Q pro motherboard.
I myself don't know much about good graphic cards so if I go off to buy something without good advice I probably end up with something that does not work or fit or something like that.
I'd like to buy a sound card for Ubuntu 10.04 x86-64 (or well supported on Linux anyway).Range price from 10 to 60 GBP.I don't need nothing extremely serious, but my USB mic+phones is not working properly and integrated sound card has rubbish in (basically all noisy).
View 9 Replies View RelatedI own a Pixelview Play Pro Ultra tv card and here are the specs
lspci
Code:
navyseal@navyseal:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
[Code]....
I have recently started using openshot to edit video and have found it very good. Previously I have been using Kino and openshot certainly seems more intuitive. Trouble is the more ambitious my productions the more juddery and prone to crashing the program becomes So I am thinking of an upgrade. At the moment I am using on board graphics. Or would more ram be the first thing to go for.
View 1 Replies View RelatedWe at church are going to build a new computer to use with Datasoul, therefore I need to use 3 monitors.I've been searching about it and it seems very hard to configure Ubuntu to use 3 monitors. I know in Windows it is very easy to configure, but our budget is very small and we cannot afford to purchase a Windows license, so I need to know which video cards to purchase in order to be easier to configure; ATI or NVidia?
View 6 Replies View RelatedI haven't had one for years, so i am not even really sure what options to look for. So i need to be able to stream media, record media, record cable box, play cable box, listen to local FM radio would be really nice.
View 1 Replies View Relatedtrying to get Ubuntu to work properly on a Del Dimension 2400. It has on board Intel Extreme graphics card. [URL] It installs and but runs slowly when the ubuntu GUI is up and running. The CPU is maxed out for quite small tasks. Selecting additional drivers gives nothing, so I guess it isn't running the graphics card in hardware acceleration - which is slowing down the system. I want to buy a graphics card to use on this Dell PC. It uses PCI expansion cards. I'm thinking of ebaying a second hand graphics card.
View 4 Replies View RelatedI'm running ubuntu 9.10 wit mythtv. My dvb card is a haupauge pvr 1250. When I run the backend, this is the output.
Code:
alex@mythtv-center:~$ sudo killall mythbackend
[sudo] password for alex:
alex@mythtv-center:~$ mythbackend
2010-01-01 16:16:39.329 mythbackend version: branches/release-0-22-fixes [22594] www.mythtv.org
2010-01-01 16:16:39.329 Using runtime prefix = /usr
code....
New VideoCard, mplayer visuals gone Mplayer and Rythmbox, which I believe use the same visualiser engine, have both gone black-screen since I installed a new video card. All was fine just this afternoon with integrated graphics, but I put in the video card and it all went kaput.Everything else is working fine - 3D games, GL screensavers, movies, and desktop effects (currently off, but they do work).
Any ideas what could be going on? The options for visualisations are enabled, I've tried just fiddling with the quality levels and changing the visualizer (Goom, monoscope, etc) and it's all just black.Here's a ton of info - I don't know what's needed so I'm just throwing anything I think might be requested in a pre-emptive move!Card: It's an MSI N9400GT - it's an Nvidia chipset something something, SLI card.
Driver: Proprietary "NVIDIA accelerated graphics driver (version 185)" via Ubuntu Hardware Drivers
Machine: Ubuntu 9.10, 5.9GB RAM, Pentium Dual-Core E500@2.60GHz
rhythmbox in terminal (launching, and playing CD)
Code:
~$ rhythmbox
** (rhythmbox:3211): CRITICAL **: atk_object_set_name: assertion `name != NULL' failed
** (rhythmbox:3211): CRITICAL **: atk_object_set_name: assertion `name != NULL' failed
[code]....
My multimedia card reader does not work with new ubuntu version fresh install:
lsusb says:
Code:
Bus 001 Device 002: alcor micro corp. multimedia card reader
dmesg:
Code:
[6.544269] usb-storage: device scan complete
[6.544848] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[6.545482] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[6.546102] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[6.546728] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[6.547227] sd 2:0:0:0: Attached scsi generic sg2 type 0
[6.547338] sd 2:0:0:1: Attached scsi generic sg3 type 0
[6.547439] sd 2:0:0:2: Attached scsi generic sg4 type 0
[6.547550] sd 2:0:0:3: Attached scsi generic sg5 type 0 .....
Karmic ( kernel 2.6.31) does not support my TV card:
Code:
~$ lspci -vnn
Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133]"1131:7133" is nowhere present in the 2.6.31 SAA7134 cardlist. However, "1131:7133" is supported as card 17 under a different card name within kernel 2.6.33, see
HTML Code:
[URL]
Where do I look for guidance on such a kernel upgrade? My impression is that grub permits booting to an earlier kernel so a boo is recoverable. While not particularly relevant, my card is a Chronos Video Shuttle II.
Do I need to uninstall the drivers for the old card first?
View 1 Replies View RelatedI've no idea what the heck is going on with my TV capture card, i went to the other posts about my Hauppauge Inc. HDPVR-1250 model 1196 but it all didn't work i have the ubuntu-restricted extras installed but mythtv is not picking up the card. i'm running ubuntu karmic.
View 9 Replies View RelatedI can't get my SAT card to work anymore for I'm installed 10.04.It worked fine under 9.10.Any idea how I can debug or solve the issue.
View 4 Replies View RelatedI am running Ubuntu 10.04 with an Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller, and no sound output. I have both pulseaudio and ALSA installed. I have already checked with
Code:
alsamixer
that my sound isnt muted and aplay -l outputs this
Code:
xxxx@xxxx-ubuntu:~$ aplay -l
[Code]...
I know there are heaps of sound problem threads around here, and I've been through them all and I still can't my sound to work.I have the motherboards onboard audio which works perfectly when I plug in speakers.I want to use my Creative Xfi xtreme audio. When I select it as the output for my sound, it freezes my audio players and firefox when I try.I don't know what the following means, but this is what ople need from other threads.tim@ubuntu:~$ uname -aLinux ubuntu 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686 GNU/Linux
tim@ubuntu:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
[code]...
I am trying to get mythtv to work with my tv card. I am using ubuntu 10.04 and I have installed mythtv but it isn't picking up my tv tuner card. I have a Hauppauge wintv hvr 1250. I am wondering what I need to do to get it to work?
View 1 Replies View RelatedI'm looking to put a new video card in my desktop. I need one that will be able to handle H.264 at 1920x1080, and I would like to find one that can do HDMI with audio. Shopping for video cards, as I heard somewhere, is the kind of thing that makes you want to bang your head against a wall until you go blind, because then you won't need to worry about it any more... someone will be able to recommend a model, or at least a chipset or something, before I rip my own eyes out.
View 6 Replies View RelatedI am attempting to get ubuntu working on my system.I have tried on previous systems without success, hopefully it works out this time.Currently my only major issue with it is I cannot get any sounds to play.I use a Logitech G35 usb headset and onboard audio (GIGABYTE GA-890GPA-UD3H motherboard, Realtek ALC892 audio chipset).Ideally, I'd like to be able to listen from either source, though just getting one working would be great.Ubuntu is currently not detecting any sound.
Using aplay -l, it said no sound card found. Using lspci -v, so sound devices were listed.I am a complete noob to ubuntu, I had to research to figure out what to do with 'aplay -l' (Application -> Accessories -> Terminal, type command in terminal). My Windows troubleshooting skills seem largely useless in a Linux environment.
My laptop is Sony VAIO. I installed ubuntu. However i dnt get sound. My sound card is not working i think. How can i install my sound card here in ubuntu.
View 1 Replies View RelatedI am running a fresh install of latest Ubuntu and trying to get my TV Card to work. I have tried mythtv and tvtime but nothing with them.
Normal audio works. Set everything to max level with alsa.
Device info:
$ hwinfo --tv card
05: PCI 0a.0: 11200 TV Card
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1131_7133
[Code]....
After a while I decided to give ubuntu another go so I set up a dual boot configuration. Everything works well except my graphics card. I have 2 problems (don't know if they are connected)To start with, it's a laptop with an onboard Radion 3200 and it has another ATI Mobility Radeon HD4570 built in. I have an external screen attached to my laptop. (1920x1080)When Ubuntu first booted it asked me if I wanted to install proprietary drivers, so I did that. Now when I took a look in the control center it showed my two monitors but they were both attached to the 3200 and I can't seem to find anything about the other (better) card. It does not appear in the proprietary drivers, I can't (I think) select it in the configuration utility.
View 5 Replies View Related