Debian Multimedia :: Package Conflict With KDE And Xfce (wheezy)
Jul 27, 2011
I have Xfce installed on wheezy, and I was planning on installing some KDE components for kicks. When I tried to install kdebase-workspace I got this error from aptitude The following NEW packages will be installed:
[Code]...
The following packages are RECOMMENDED but will NOT be installed: kinfocenter plasma-scriptengines policykit-1-gnome polkit-kde-1 upower 0 packages upgraded, 30 newly installed, 0 to remove and 49 not upgraded.
Need to get 78.5 MB of archives. After unpacking 137 MB will be used. The following packages have unmet dependencies: xfce4-notifyd: Conflicts: notification-daemon but it is not going to be installed.
If it's not going to be installed, then where is the conflict? I've seen "Depends: X but it is not going to be installed", which makes sense. The only solutions are to remove xfce4-notifyd or to keep most of the KDE stuff uninstalled. apt-get also wants to remove xfce4-notifyd. Edit: Ok, it looks like both plasma-widgets-workspace and xfce4-notifyd provide notification-daemon, but I still don't understand why the aptitude error doesn't tell me that xfce4-notifyd conflicts with plasma-widgets-workspace instead of notification-daemon.
First of all - to refresh icon on desktop i've had to install gamin instead fam (after this, icons on desktop was refresh correctly). I don't know that have connection, but who knows. Anyway - my problem. Things marked as red are duplicated entries in menu. How to simple delete them? Menu are not refreshing too - i unmark "Inne" (Others) in alacarte, but it's still visible.
With Jessie, I use Menulibre. It's not in the Wheezy repos that I see, However. I read of Alacarte, but it seems to have a list a mile long of other stuff that "needs" to be installed with it.
I upgraded my main PC's Xfce 4.6 to Xfce 4.8 this morning.Now, every time I start Thunar for the first time after a new boot, it takes about 30 seconds to appear, and then about 10 seconds later, a second instance of it appears.After that, Thunar appears instantly every time I start it during that same session. But if I shut-down or restart my PC, Thunar again takes about 30 seconds to start up, and a second instance of it appears about 10 seconds later.
Google searches seem to indicate that people running other distros are also experiencing this problem. On advice in a different forum, I deleted the ~/.config/Thunar folder and restarted my PC, but that didn't help -- it created a new Thunar folder, but the long delay and the double-Thunars are still there every time I run Thunar for the first time in a session.
I'm currently running Debian Wheezy (upgrading to Jessie is not possible since I'm using OpenMediaVault which only supports Wheezy) but ever since I installed Deluge BitTorrent client that I've had this python-libtorrent package as "kept back". I'd like to fix this system state but how...
A few things I've tried:
Code: Select all$ sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done
The following packages have been kept back: Â python-libtorrent 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
Code: Select all~$ sudo apt-get install python-libtorrent Reading package lists... Done Building dependency tree Reading state information... Done
[Code] .....
I have the following APT repositories on my sources which I believe are causing my problem:
Code: Select alldeb http://dh2k.omv-extras.org/debian/ stoneburner-miller main deb http://ppa.launchpad.net/deluge-team/ppa/ubuntu precise main
They were added through OpenMediaVault's interface when I enabled some checkboxes to be able to install Deluge.
For some odd reason in wheezy it's not downloading the packages in the 'all' architecture, this leads to interesting issues when it comes to things like installing chromium and other packages that aren't built for one particular architecture. I've only noticed this in wheezy, and i'm not sure if this is normal. If there is any easy way to fix this, I'd be more than happy to hear.When i try to do an apt-get update, it only downloads from amd64 and not all. I've tried the mit mirror, and also the one shown there or well the default one but it still doesn't seem to be working right.
I really don't like GADMIN-SAMBA, and want to load the graphical tools I used previously on my homebrew Samba box I have at home (used to have Squeeze on it).
Have amd64 Debian 7.8 installed on a slimline HP Compaq PC ...
I'm running debian 2.6.32-5-amd64 and have spent an interesting day trying to get nvidia-glx running...What appears to be happening, is that installing nvidia-glx uninstalls X.I've tried various installation methods (Synaptic, apt-get, module-assistant) and the final result seems to always be /usr/bin/X not found.Re-installing X blows away nvidia-glx.The symptoms look a lot like this post: viewtopic.php?f=7&t=45188Is it possible that this problem has returned?
i have fresh installed debian wheezy xfce4, and using slim to start it but i can't get reboot, shutdown and thunar can't open flash and others volumes. i using .xinitrc (exec ck-launch-session startxfce4)
There is a video file with .DAT extension.How can I play such files via VLC or SmPlayer?Which codecs does it need?Following packages are already installed :
Something within the group of updates which I installed last week (April 6 to 10 or so) has impaired the functionality of my mouse's scroll wheel. It will no longer scroll pages on Iceweasel, Midori, some PDF readers, PCManFM, and others. The "up arrow" and "down arrow" seem also to have been compromised. I suspect the culprit might be libx11. This is an amd64 system with the nvidia video driver.
If you do, please let me know what sound card you're using. I'm beginning to think its the driver. All kinds of weirdness in early bootspace and also alsactl init fails with a missing init directory for the device.
I'm on a Creative Labs Soundblaster Audigy SE and it's completely non-functional. I've seen bugs reported with the audigy LS but never the SE.
I have Debian WHeezy 7.7 KDE, card Radeon 5000 series. Card has HDMI, video on HDMI working, but sound not working. System see sound device, but if I select this and try to play music then no sound. I tried many things. Below is some lists.
So the other day I installed Debian Wheezy on my Sun Blade 150. While the OS is installed fine, all the webkit based browsers continuously crash after a few pages. So, I tried to download IceWeasel since it wasn't installed when I tried installing Debain off the DVD. The only problem is, it won't install as the Xulrunner version it requests is xulrunner-24.0_24.5.0esr-1~deb7u1_sparc, however the only version available on the repositories is newer. Is there any way to get the older xulrunner version, or is there going to be a fix for IceWeasel soon on Sparc?
My hp does not want to start X for some reason. I have so many errors. I made an account to just see this problem be fixed. Now when I type "startx" I get back, "bash: /usr/bin/startx no such file in directory". I have to use GRUB due to the fact I forgot my login. Although, I do remember my password.
I am pretty new to using Linux, I am currently trying to configure 3 monitor's with Xorg in Debian Wheezy. I have 2 video cards in the PC and one has a Dell Y-splitter to connect 2 monitors. 2 monitors are 1920x1080 resolution and the other is 1280x1024.
LSPCI Code: Select all00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
[Code] ....
I attempted to write my own xorg.conf file, but that resulted in the machine booting to single user mode and the xorg startx error log said it could not find any devices.
When I used the xorg.conf.new generated by the "xorg -configure" command, I was able to get it to display as 3 independent screens, but there was overlap on the screens. I.E. if you moved the mouse to the right side of one monitor, it would show on the left side of another screen at the same time.
automatically generated xorg.conf: Code: Select allSection "ServerLayout"     Identifier   "X.org Configured"     Screen   0 "Screen0" 0 0     Screen   1 "Screen1" RightOf "Screen0"     Screen   2 "Screen2" RightOf "Screen1"
I have some very strange issues with my tripple monitor setup on debian wheezy. I have acer aspire V3 laptop with i915 Intel (Intel® HD Graphics 4000) as part of i3 and nvidia GT 740M which I never managed to get working with or without optimus to any degree whatsoever. What I want is a reliably working triple monitro setup. I have 2 additional DELL u2412m monitors which I did manage to get to work on few occasions by more or less randomly turning stuff on and off via lxrand and KDE systemsettings (so I do knwo for a fact that tripple monitor setup works). Arandr doesn't work, and executing xrandr from cmd doesn't work. I can relatively easily get the 2 monitors to mirror each other, but to get them to work separately is extremy difficult. It's always the same error but the well known crt. For example:
When it did work I copied arandrs script in hopes it would work, but it doesn't. Obviously, here is the issue that the crtc can not be configured so if somoen could tell me why and how to get the damn thign to use a specific crtc it would be awesome. Also, I noticed that when I hit "identify monitors" in KDE systemtools, it would say VGA HDMI for both VGA and HDMI outputs.
Here is xrandr output from when it worked:
Code: Select allScreen 0: minimum 320 x 200, current 5760 x 1200, maximum 8192 x 8192 LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm     Identifier: 0x42     Timestamp: 143521     Subpixel:  horizontal rgb     Gamma:   1.0:1.0:1.0     Brightness: 1.0
[Code] ......
Here is now:
Code: Select allScreen 0: minimum 320 x 200, current 3840 x 1200, maximum 8192 x 8192 LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm     Identifier: 0x42     Timestamp: 5817108     Subpixel:  horizontal rgb     Gamma:   1.0:1.0:1.0     Brightness: 1.0
i have an installation of wheezy 7.8 i think. i was facing difficulties in read of matroska video. therefore have decided to installer gstreamer1.0 wich should be resolve my problem. i have added the backports repository in apt sources list. after an apt-get update i launch apt-get install gstreamer1.0 . i have noticed it have starting downloading more file than it needs i concluded that it was a upgrade or something like because the kernel was also updated. after the the packet downloading it has started the installation with some errors related to LOCALE LCC. it has stopped and restarted some services wich is normal. i have closed all others apps and restarted. Here start the hell. after the restart i have passed the kde login screen and after BLACK SCREEN with mouse working.
Alt+F2 don't open the krunner
What i have tried? i have rename the /home/jefcolbi/.cache and back it again, rename /home/jefcolbi/.kde and back it again. next i have tried to check the Xorg config file. i created a new one with X -configure, modified it to feet my system configuration this does not resolve the problem but add another the keyboard is not working in graphical mode.
My system configuration:
Toshiba laptop Satellite Pro L300 Dual core 3gb Ram graphic card:Mobile Intel(R) GMA 4500MHD sound card: Intel HD Audio debian whezzy 7.8 with KDE
Note: everything was working fine before trying to install gstreamer1.O from backports repository
The problem: backlight is in maximum state and I can not change it.
There are a tons of advices like this:
1 - Open terminal (as a superuser) and type: gksudo gedit /etc/default/grub 2 - In the text file that opens, find the line which says GRUB_CMDLINE_LINUX="" and, inbetween the "", insert the words "acpi_backlight=vendor" (the line will be as follows: GRUB_CMDLINE_LINUX="acpi_backlight=vendor"), save and close the file. 3 - Back again in the terminal session, type: sudo update-grub 4 - Reboot.
I'm having all sorts of problems after doing my first update (#1. safe-upgrade, #2. full-upgrade) in over a month.
Anything from no Nvidia linux-headers being found to any VT not working. After completely removing all of the previously tried Nvidia presence on my PC, is there a safe way for me to install the non-free drivers?
There is a folder in my home titled 'gtk-3.0,' which continues to reappear even after I have deleted it. The reappearance of the folder seems to occur after using lxappearance to change the themes. I will not be participating in the headaches of the switch from gtk2 to gtk3, just as I did not participate in the headaches of the switch from KDE 3 to 4. So the following are my questions;1. Is it possible to permanently delete the gtk-3.0 folder so that it can not ever reappear in my home? (And why is it appearing there anyway? Shouldn't it be hidden with a dot?)2. If I can not prevent this folder from appearing in my home, is there a setting I can use in Wheezy to block gtk3 libs and apps from installation? Presently, the only gtk3 lib or app shown by aptitude search is libcanberra-gtk3-0, but I can't remove it due to notification-daemon dependencies.3. If I switch from all gtk2 apps to all KDE apps will that solve the problem of gtk3 placing a completely unnecessary folder in my home?
After the updating the synaptics driver in wheezy, I can no longer tap to click. This includes single-finger taps in the center and corners. Here is the relevant section from my xorg.conf
I rebooted my system about a few days ago to find that whenever X was started, my mouse and keyboard would not function. I am unable to even switch to another tty when this occurs, however alt+sysrq+r will allow me to switch ttys again.
Xorg.0.log [ 70.287] X.Org X Server 1.10.1 Release Date: 2011-04-15
I experienced this problem on Friday but didn't have time to write a warning.A couple of days ago, xserver-xorg-core 2:1.10.2-1+b1 reached Testing before a corresponding dependency (recommendation), thus breaking the hardware acceleration. The issue is (better) described here (1) by a developer.A possible solution is to keep (2) the previous version (2:1.10.2-1) or, if you already installed the faulty one, to grab the former version from Debian Snapshots (3) and downgrade the package.Because the error was a simple path change, one could also keep the new version of xserver-xorg-core and link the DRI Mesa modules to the directories that are inspected now (as described here [4]).The issue has already been addressed (5) and a new version should appear in Testing shortly.[URL]
I can't get Gnome's Web(browser) (ver 3.4.2) working with flash. I see only a kind of blue box, when I click on it, audio playback starts but not video. I tried this on two machines, one with Intel graphics, second with radeon.
I am trying to update two 64-bit PCs from SuSE 11.1 to 11.2. Both are having the same problem: On the "Installation Settings" screen, under "Packages" is a message: "Cannot solve all conflicts. Manual intervention is required" If I click on "Packages" a dialog box opens with this message:
"problem with installed package kernel-default-base-2.6.27.29-0.1.1.x86_64". The conflict resolution is either "keep kernel-default-base-2.6.27.29-0.1.1.x86_64" or "keep kernel-default-2.6.27.29-0.2.2.x86_64"
