Ubuntu Multimedia :: Resolution Too Low On 10.04 ?
Jul 30, 2011
I recently installed (dual booting) Ubuntu 10.04 on a Samsung QX411-W01 running Windows 7. It's a system with with two graphics drivers (Intel HD 3000 and NVIDIA GeForce GT 525M, 1GB).
Right now when I try to change the monitor settings, Ubuntu doesn't seem to detect my proper capabilities (currently only allowing 1024x768 when Windows 7 is as good as 1366x768. )
I don't really know how to go about fixing this issue. I've tried reading through the forums, but I'm not finding any solutions.
Also I am unable to turn on any form of desktop effects. It seems the issue is with the driver.
View 7 Replies
ADVERTISEMENT
Apr 2, 2010
I'm having problems adjusting my screen resolution. I'm using Nvidia Geforce FX5300 video card and Samsung T220P LCD screen with resolution of 1920x1200. After installing the Nvidia driver I went to system -> preferences -> display in order to change the resolution to 1920x1200. Unfortunately, the available resolutions were only 640x480 and 320x240. I tried to set the resolution manually, using the advanced button, but when I did this everything was extremely big on my screen.
View 1 Replies
View Related
Apr 14, 2010
I just Install Ubuntu for the first time and am having problems setting my hdtv's native resolution of 1280x768. I have tried editing the xorg.conf file with no success. Video card is an Nvidia 8600GT. Also I have a dual boot with Fedora 12 and it runs at 1280X768 with the same xorg.conf file edits i have been tring in Ubuntu. Here is my current xorg.conf file:
Code:
Section "Monitor"
Identifier "Default Screen"
[code]....
View 4 Replies
View Related
Jan 16, 2011
The native resolution from my LCD monitor is 1680x1050, but the list of "NVIDIA X Server Settings" only allow me to set it to maximum 1360x768. The monitor is conected via VGA cable and it is recognized as CRT-0. When I run the 'xrandr' command from terminal, it shows:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1680 x 1050
default connected 1024x768+0+0 0mm x 0mm
1024x768 50.0*
800x600 51.0 52.0 53.0
[Code]....
View 7 Replies
View Related
Jan 12, 2010
I can't increase my screen resolution to higher than 800x600. In Windows I have a 1024x768 resolution. This is my xorg.conf file
Code:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]....
View 9 Replies
View Related
Feb 14, 2010
get 1024 X 768 resolution in ubuntu 9.1 desktop edition..
my xorg.conf.new says..,
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code]....
get 1024X768 resolution please.....
View 8 Replies
View Related
Feb 26, 2010
I'm using Ubuntu 9.10 64-bit with a GTS 250. After installing the restricted driver from NVIDIA's website I get stuck at a 640x320 resolution. The only other option I get is 320x240. The resolution I need is 1680x1050.
I've also encountered this problem with a 9600GT.
View 2 Replies
View Related
Apr 18, 2010
I have a 30" apple cinema display. The monitor handles up to 2560 x 1600 pixels which is the optimum resolution for this monitor. I found out that most apple monitors have nvidia graphic card.The monitor is hooked up to a motherboard Intel BOXDG45FC. This motherboard has Onboard Video Chipset Intel GMA 4500. However, using KDE interface I dont get beyond 1280x800 resolution for the monitor.How can I get the maximum resolution for the monitor?
View 9 Replies
View Related
Apr 30, 2010
I've a Samsung SyncMaster 943, widescreen I also have a GForce 8400 GS This monitor supports (as seen on website) a 1440*900 resolution. I've installed the nvidia driver (from homepage) with version 195.36.24 The NVidia X Server Settings shows only a 1360*768 as max possible resolution. So, I've edited xorg.conf, restarted PC but got no luck... here it is my xorg.conf
[Code]...
View 3 Replies
View Related
May 22, 2010
I've been having a fit with Ubuntu (even tried updating to the new version). I have a USB camera (1.3mp- 1024x768 ) that I need to observe and capture images with (microphotography). I've downloaded and installed multiple packages, but have not found any way to change the default resolutions for V4l2. The resolution closest to what I need is 1024x816, but the video is torn and unusable. One program, Kamoso, worked fine in 640x480 mode, but as soon as I upgraded to Ubuntu 10, it went to the higher resolution (1024x816) which doesn't work right.
Is there some way to force v4l2 into a 1024x768 mode? The camera is a Tucsen 1.3mp microscope camera. I've emailed the company for more information and to see if they would email me the software/drivers (I lost the driver disk in a fire), but nothing so far from them.
The programs I've installed and tried: Camorama, Kamoso, Xsane, Cheese, VLC media player, v4l2ctrl, v4l2ucp, v4lctl, v4l-info. Camorama doesn't work, Kamoso- you couldn't change resolutions (ditto for Xsane), Cheese - I can change resolutions, but they have these crazy values that don't work, VLC media I cannot change either. I'm supposed to be able to use v4l2ucp to change settings, but I don't get the screen that the preview for the program (in Ubuntu Software) showed.
View 6 Replies
View Related
Jul 3, 2010
I'm using Karmic and just recently had to do a fresh install. After installing I immediately ran the update manager and updated everything I was told to update. Upon rebooting, my resolution is stuck at either 800x600 or 640x480. I've been searching around for a while now, and none of the fixes I've looked at have worked with my architecture. Here's my lspci output.
[Code]....
View 4 Replies
View Related
Jul 16, 2010
I just switched monitors to a Viewsonic VX2025 and I am unable to get beyond 1280 x 1024 using the nvidia x server settings. My graphics card is a GeForce 5200. These are connected with a DVI plug. I would like to be able to set my resolution to 1920 x 1080. (Also, the card and monitor worked at 1920 x 1080 in a previous windows machine.)
I have done a fair bit of searching and it appears that my issue is either the x configuration file or EDID. After 2 days of working with this it's gotten confusing to say the least. So, I'm looking to see if others have had a similar problem and how to solve it. I have not altered an x config file before, so not exactly sure of where to begin.
View 3 Replies
View Related
Jul 26, 2010
How can I increase the resolutions of my VGA Port?As you can see in the screenshot, the maximum resolution that Ubuntu 10.04 detect it's 1360x768 but in other OS I can use 1920x1080 for example.
View 4 Replies
View Related
Sep 6, 2010
After a while I decided to give ubuntu another go so I set up a dual boot configuration. Everything works well except my graphics card. I have 2 problems (don't know if they are connected)To start with, it's a laptop with an onboard Radion 3200 and it has another ATI Mobility Radeon HD4570 built in. I have an external screen attached to my laptop. (1920x1080)When Ubuntu first booted it asked me if I wanted to install proprietary drivers, so I did that. Now when I took a look in the control center it showed my two monitors but they were both attached to the 3200 and I can't seem to find anything about the other (better) card. It does not appear in the proprietary drivers, I can't (I think) select it in the configuration utility.
View 5 Replies
View Related
Oct 27, 2010
i'm trying to set the resolution to 1440 x 900 on ubuntu manually since it's not being showed under the options. I've followed this tutorial [URL] The problem is that i don't have the output name to add on this command (as you can see below under the xrandr command.:
xrandr --addmode XXXXX 1440x900
xrandr
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
[Code]....
View 1 Replies
View Related
Dec 16, 2010
I have my Xubuntu box connected to a 1920x1200 LCD monitor via a KVM switch. If the KVM is set to the Xubuntu box when I boot, all's well, but if the KVM is set to the other machine, Xubuntu boots into a 800x600 resolution. This behavior started with Maverick, when I was running Lucid. the correct resolution was set no matter the position of the KVM switch. Is there some place in Maverick that I need to set the resolution to 1920x1200 so it is set correctly regardless of the KVM?
View 1 Replies
View Related
Jan 3, 2011
I've only been using it for about 6 hours. I'm impressed by what I've seen so far, but I'm having trouble getting a higher screen resolution.
I have an Acer Aspire 5536 with an ATI Radeon 3200 graphics card. I installed Ubuntu 10.10 with Wubi to dual boot alongside Windows 7. When I go to change the screen resolution, I can not choose a higher one than 1366x768. I would really appreciate it if someone could help me get a resolution of 1920x1200.
Like I said, I'm a Ubuntu newbie (and I don't have much savvy on graphics cards either)
View 4 Replies
View Related
Jul 5, 2011
I recently ran the update manager on my Ubuntu 11.04 box then shutdown and went to bed. When I booted the pc back up the next day my resolution is stuck at 1024x768 when I normally run at 1366x768.
I'm using the default open source drivers since the AMD ones are useless with my hardware (specs in the signature) I've tried changing the resolution through the "monitors" GUI and directly through xrandr.
xrandr output:
Code:
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
[Code]...
View 9 Replies
View Related
Jul 31, 2011
I know this is probably a stupid question , but I started using Ubuntu 11.04 .
My screen resolution on windows was 1600x900
But on ubuntu (even after installing proprietary drivers) the highest I can get is 1024x768 .
I tried using xandr but couldn't work it out .
My xandr info
When i tried adding a new mode using the command
I got the following error
Now I'm not sure what VGA refers to , but Im using a vga port to connect my monitor
Also I'm using only one monitor.
View 9 Replies
View Related
Sep 1, 2011
Canadian hi-fi manufacturer Bryston is shipping a Music Player, which is in effect a pared down Linux box running some media player. The good thing is that it plays the files at their native resolution16bit/ 44. 1KHz for ripped CDs, 24/96 and 24/192 for hirez downloads, as well as other intermediate values.Does anyone happen to know which player they are using?
View 1 Replies
View Related
Feb 25, 2010
I installed ubuntu onto a desktop computer about a month ago. Everything was working well straight away, I had it outputted onto my TV (32 inch Hi Def Sharpe Aquos). The Graphics card is an NVidia Ge Force FX 5600. On installation and after a restart the computer detected the TV and actually gave the name of the TV in the settings automatically, in the system --> Administration Menu there is a programme that sets the resolution and settings for the NVidia card. This all sorted itself automatically and displayed in 1360 x 768 which was perfect on my TV. For some reason when I turned it on this morning it will only display in 640 x 480 or 320 x 240. xrandr only gives minimum of 320 x 240 and maximum as 640 x 480. How to rectify this?
View 3 Replies
View Related
Mar 17, 2010
i wanted to sort and organize my pictures by resolution ( like 1024*768 ) but i failed. is there any program or search plugin for nautilus to sort or list my photos by resulotion?
View 3 Replies
View Related
Apr 7, 2010
Does anyone know where to manually set screen resolution in the new 10.4 beta? Used to be in xorg.conf, but it appears that it doesn't exist in this release.
View 2 Replies
View Related
Apr 21, 2010
My screen resolution keeps reverting back to the default resolution 800x600. I'm using ubuntu 10.04, but had the same problem on 9.10 on my Acer Revo r3600 ION. I am able to change the resolution to 1280x1024 but have to do it by the nVidia configuration tool. The tool then allows me to 'Save to X Configuration'which it appears to have done successfully.See the sections from my 'etcx11xorg.conf' file. This is the state of the file after a reboot by the way.how I can get my desired resolution to persist after I reboot?
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
View 2 Replies
View Related
Apr 29, 2010
After update from 8.10 to 9.10 I have screen resolution 1440x900, which is not supported by my monitor. Following changes had no effect on my screen resolution
xrandr:
Code:
$XAUTORITY=/home/zuker/.Xauthority DISPLAY=:0.0 xrandr --output default --mode 1024x768
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
xorg.conf
Code:
Section "Screen" ...
Subsection "Display"
Depth 24
Modes "1024x768"
Virtual "1024 768"
EndSubSection
View 9 Replies
View Related
May 14, 2010
How do I change the resolution in skype 2.1 beta on ubuntu 9.10?? At the moment my webcams resolution appears to be half the size of what it should be which is creating a double vision/image of me and I can only see about half of my head vertically. My resolution should be 640X480, but it clearly is not. It looks way smaller like 320X240.
View 8 Replies
View Related
May 21, 2010
I installed 10.04 on my former windows box last night, and I seem to be stuck at a screen resolution of 1024x768. I have a Geforce 7600 GT graphics card, and I installed current drivers via the hardware drivers option. I can't go above this resolution in the nvidia x-server settings, and even xrandr says the highest resolution I can use is 1024x768. What is up with that, and how can I change it?
View 1 Replies
View Related
May 27, 2010
Since a fresh install of lynx, I've been having problems trying to get my resolution of 1366x768 to fit properly onto my monitor, regardless of what I try, the screen does not fit completely inside the monitor, and I have to pan around to view the entire desktop.
I haven't had problems with this in previous versions of ubuntu. I've tried all the nvidia driver versions in the repository, as well as the latest from nvidia itself and they all do the same thing.
View 1 Replies
View Related
May 29, 2010
I've just bought a new monitor - Viewsonic VA2213w and am trying to set it up with Lucid. The resolution required is 1920x1080 @ 60Hz. I have an NVidia GTS250 with the proprietary driver v195.36.24 installed. I can set the right resolution in the nvidia-settings app, but it will not survive a restart. X always reverts to 1024x768. I have manually edited xorg.conf now to try to force the mode. The GDM login screen displays at the correct resolution, but on logging in X changes the resolution. Xorg.0.log shows the resolution being correctly set to 1920x1080 initially, then right at the end for some reason it is reset to 1024x768.
xorg.conf
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Thu Apr 22 11:45:35 PDT 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 22 11:44:23 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection .....
View 1 Replies
View Related
Jun 14, 2010
I am a first time user and recently installed 9.10 from a LiveCd then immediately upgraded to 10.04 LTS. I had no black screen problem, but my resolution is stuck at 640x480 with no other options. I upgraded my driver to NVIDIA-Linux-x86_64-195.36.31 and the resolution remains the same. I have a Geforce GTS 250 and an Acer H233H capable of 1920x1080_75.
My XFile:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Jun 3 09:41:37 PDT 2010
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package .....
I have tried entering a CVT generated modeline to the xorg file but it did nothing.
View 2 Replies
View Related
