Ubuntu Multimedia :: Resolution Not Fitting Monitor Properly?
May 27, 2010
Since a fresh install of lynx, I've been having problems trying to get my resolution of 1366x768 to fit properly onto my monitor, regardless of what I try, the screen does not fit completely inside the monitor, and I have to pan around to view the entire desktop.
I haven't had problems with this in previous versions of ubuntu. I've tried all the nvidia driver versions in the repository, as well as the latest from nvidia itself and they all do the same thing.
View 1 Replies
ADVERTISEMENT
Mar 7, 2015
I am using xfce4 and in this image
The top bar only shows the bottom half. the bottom bar only shows the top half. i also can't see anything after the r in centre on the right. part of the initial picture on the left also does not display.
My thought is that the tv it has a resolution of 1920x1080 and this is causing the issue. i have this in my xorg.conf:
Code: Select allSection "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "nvidia-auto-select +0+0; 1920x1080_60 +0+0"
[Code] ....
The graphics card is
Code: Select all02:00.0 VGA compatible controller: NVIDIA Corporation C77 [GeForce 8300] (rev a2)
Changing metamodes to 19200x1200 doesn't change anything.
View 4 Replies
View Related
Apr 18, 2010
I have a 30" apple cinema display. The monitor handles up to 2560 x 1600 pixels which is the optimum resolution for this monitor. I found out that most apple monitors have nvidia graphic card.The monitor is hooked up to a motherboard Intel BOXDG45FC. This motherboard has Onboard Video Chipset Intel GMA 4500. However, using KDE interface I dont get beyond 1280x800 resolution for the monitor.How can I get the maximum resolution for the monitor?
View 9 Replies
View Related
Jul 16, 2010
I just switched monitors to a Viewsonic VX2025 and I am unable to get beyond 1280 x 1024 using the nvidia x server settings. My graphics card is a GeForce 5200. These are connected with a DVI plug. I would like to be able to set my resolution to 1920 x 1080. (Also, the card and monitor worked at 1920 x 1080 in a previous windows machine.)
I have done a fair bit of searching and it appears that my issue is either the x configuration file or EDID. After 2 days of working with this it's gotten confusing to say the least. So, I'm looking to see if others have had a similar problem and how to solve it. I have not altered an x config file before, so not exactly sure of where to begin.
View 3 Replies
View Related
Oct 27, 2010
i'm trying to set the resolution to 1440 x 900 on ubuntu manually since it's not being showed under the options. I've followed this tutorial [URL] The problem is that i don't have the output name to add on this command (as you can see below under the xrandr command.:
xrandr --addmode XXXXX 1440x900
xrandr
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
[Code]....
View 1 Replies
View Related
May 29, 2010
I've just bought a new monitor - Viewsonic VA2213w and am trying to set it up with Lucid. The resolution required is 1920x1080 @ 60Hz. I have an NVidia GTS250 with the proprietary driver v195.36.24 installed. I can set the right resolution in the nvidia-settings app, but it will not survive a restart. X always reverts to 1024x768. I have manually edited xorg.conf now to try to force the mode. The GDM login screen displays at the correct resolution, but on logging in X changes the resolution. Xorg.0.log shows the resolution being correctly set to 1920x1080 initially, then right at the end for some reason it is reset to 1024x768.
xorg.conf
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Thu Apr 22 11:45:35 PDT 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 22 11:44:23 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection .....
View 1 Replies
View Related
Nov 30, 2010
I have two video outs on my AGP video card. One is VGA and the other is S-video. I tried connecting the second monitor (Viewsonic) by itself to the VGA port and it works fine and runs at 1280x768 very clearly. I then attached the LG monitor instead to the VGA and attached the Viewsonic to the S-video port. Now it is running at 1024x768 and I have no option to increase the resolution.Is this a limitation based on S-video being worse than component, which is worse than VGA and it simply cannot handle the data density for larger resolutions? Or would it be my video adapter? I swear I had monitor control working fine through the panel, but now when I click on the monitor button it says, "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?" and that opens an Nvidia X control panel.
Also, using S-video means the computer doesn't recognize the Viewsonic LCD TV properly, it just recognizes it as a TV. Is this because S-video doesn't play nicely with EDID reporting?It would be nice to get a sharp picture on that TV, the way I had when it was connected like a monitor via VGA. I am not sure what's going on anymore, so any help on clearing up driver issues or getting configuration apps installed or anything like that would be helpful.
View 5 Replies
View Related
May 4, 2011
I started using Ubuntu 11.04 today.
Everything works fine with my monitor directly connected to the computer. I get a default screen resoluton of 1600 x 1280, which is just fine.
However, when I connect the screen through a video splitter to be able to use a beamer, the screen resolution defaults to 1024x768. Moreover, Ubuntu then detects an unknown monitor.
I recall that I have solved this problem before with an older version of Ubuntu.
Now it seems that there is no xorg.conf anymore so I don't know what to do.
How can I force Ubuntu 11.04 to start with a screen resololution of 1600 x 1280.
View 2 Replies
View Related
May 24, 2011
I have an EeePC 1005HA with Intel 945G chipset and graphics. I've got a 21" no-name touchscreen attached to the laptop with the intention of hiding the laptop away behind it and simply using the tactile widescreen with virtual keyboard (onboard). By the way, the Touch screen is working great OOTB in Ub 11.04, although will have to tweak some more to get multi-touch working.On it's own the netbook runs 1024x600 (16:9) automatically. As soon as I plug in the larger monitor and mirror the images it auto-defaults both to 800x600 60hz and I have no options to select a higher res. I want to be able to run the large screen in something like 1024x600 or better, as long as its 16:9. At the moment everything is stretched out on the larger screen and on the netbook I have a 800x600 with black margins left & right.
Can't seem to work it out. The Monitor Config doesn't give me any higher options than 800x600 when mirrored. Below is the output of xrandr, if it's any help. Also my xorg.conf file is practically empty.
View 9 Replies
View Related
May 27, 2011
Got a system that I've been using for a long time now without any problems. Now suddenly it won't use a higher resolution than 1024x768.I never added any mods to the configuration and have not added any software other than recommended updates it quite a while.Any ideas what happened or how to fix it? I checked and the monitor/graphics card will still do upper resolutions with windoze so I'm guessing the hardware is alright.Using OpenSuse 11.3, 64bit, on a dual core athalon with a Sapphire ATI x1600 graphics card and a 22 inch flat screen that is supposed to go 1600 x 1050.
View 6 Replies
View Related
Jan 2, 2010
I've got a little problem with my 9" netbook. It came preinstalled with Ubuntu (factory install), but I reinstalled it to get a fresh karmic as it was a second hand.The problem is, whenever I plug in an external monitor, rightclick on the display icon and click "Configure Display Settings..." both monitors go black and nothing responds. Weird thing though, is that sometimes the mouse appears on the second monitor. I need a solution for this, either creating a xorg file (I have no clue on how to do that) or some other solution that works.
My netbook resolution is 1024*600, the external monitor resolution is 1024*768. It should be noted that I had a similar problem on another Ubuntu laptop (NVIDIA drivers), but it had to do with the resolution height. My laptop had 1440*900 and my external monitor needed to have the height lower then 900.
For further information, this is what the system profiler says about my graphics card:Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller.I hope you guys can help me, as plugging in a netbook to an external monitor (or TV) is not uncommon to me I like doing that, even if there's no point in it.I hope I gave enough information on this, I'm willing to give more if needed of course
View 5 Replies
View Related
Jan 27, 2010
I am running Ubuntu 9.10 on a new HP PC (Pavilion p6240f PC).This came with an Intel GMX X4500 Integrated graphics.My monitor is Samsung SyncMaster 2333. Initially I got a very bad resolution, Later I edited /etc/X11/xorg.conf (created the file) and added the following.
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30 - 75
VertRefresh56 - 61
EndSection
[code]....
With both 1600 x 1200 and 1680 x 1080 I get the resolution but I see lots of shadowing.(The letters are not crisp) Do I need to upgrade any driver ?
~$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
View 1 Replies
View Related
Mar 24, 2010
I recently got a computer and installed the ubuntu 10.04 beta on it. I'm having issues getting my monitor to display at the correct resolution. It should be displaying at 1440x900, but the highest resolution I can select from the displays configuration panel is 1366x768, which is not even the correct aspect ratio.
lspci:
Code:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
This is the whole thing, in case it helps.
From what I have read, this is a brand new chipset with the GPU built into the main CPU, as if it were another CPU core. Is there a driver for this yet, or do I have to deal with an improper resolution?
View 1 Replies
View Related
Jun 25, 2010
I'm using a laptop and running a secondary monitor to my TV. My laptop has ATI HD 3400 video card. The TV has a higher resolution than the laptop's monitor. When the video is full screened on the TV, the actual video uses the resolution of the primary monitor and not the second.
View 2 Replies
View Related
Dec 27, 2010
This has been happening with the majority of screens I try to plug into, but the proprietary nvidia driver never detects the correct resolutions -__- the open-source driver works perfectly with a little xrandr magic, but I'd like to have some 3D acceleration going on. I'm using the desktop version of Nvidia ION and ubuntu 10.10, with the current nvidia driver (from the repositories). The native resolution is 1440x900 @60 Hz. Any thoughts on this? Again, the nouveau driver is great but I'd like to have VDPAU and the like working. code...
View 9 Replies
View Related
Apr 22, 2011
I have a dell studio hybrid PC which I am hooking up to my TCL brand 40" LCD TV to use as a media center pc. The problem I am having is that I can't get the TV's native 1920x1080 resolution to display properly. The rendered desktop doesn't quite fit in the screen (I think its the top and bottom edges that are cut off) so for example the menu bar at the top is completely off the screen.
1680x1050 works fine in the sense that it fits the full desktop to the screen size, but its not the native res. In the resolution changer utility, it recognizes that my TV is a TCL brand but mentions 36 in the model name (the TV I have has 40 in the model name to denote 40") so I think Ubuntu is recognizing the wrong size TV. How can I finagle the screen settings to make the 1920x1080 fit properly on my monitor? Or get Ubuntu to correctly recognize my TV? My TV is a no-name brand so its hard to find info on it or others setting up linux with it.
View 3 Replies
View Related
Jun 15, 2010
I have problem with resolution (@gnom desktop). In Yast --> videocard & monitor is all right. There is correct resolution 1366x768 (WXGA). Also the videocard ( I don't have really one, only chipset "Intel Mobile GM45" ) is correct recognized. But Monitor isn't recognized, and I don't know which one I have (It's notebook from acer).
Nevertheless if I go direct in monitor preferences (at the bottom the monitor with a ruler symbol) the resolution is set to 800x600 and I can only change to 640x480. The monitor is as 15" recognized (I have 15.4", even a bit more broadly - 1366x768) and now I don't know what to do. All symbols, all programs, everything is huge! How is it possible to configure the correct one resolution?
View 6 Replies
View Related
May 8, 2011
I actually do have a GeForce4 MX 460 in this pc. I have a 7950gt in a different pc. Oops. I guess the MX 460 cant do 1600x1200 on the dvi output but somehow it can do it on the vga output? I guess I could just use a vga connection instead of the dvi connection.
The problem I'm having is that my LCD monitor (acer AL2021) can't be used at it's native resolution of 1600x1200. This is probably because my GeForce 7950gt graphics card is not being recognized. Xorg seems to think my card is a GeForce4 M 460. (It's not, really!) I'm using Ubuntu 10.04 LTS.
Here's what I've been doing for the last few hours:
This didn't work. 1600x1200 is still not listed.
Tried to run nvidia driver installer:
View 1 Replies
View Related
Sep 9, 2010
I recently purchased a cheap computer to use for everyday tasks. It came pre-loaded with Windows 7. The monitor I am using is a Vizio VX20L. It's native resolution is 1366X768. I have no problem with the screen resolution in Windows 7 but in Ubuntu, I am having some issues. I have the propriatary Nvidia driver installed in Ubuntu but for some reason I cannot get the screen resolution right. I am currently using a resolution of 1360x768 and the right part of my desktop is not on the screen.
I have tried to adjust the screen size using the monitor settings, but I still cannot get the whole screen to show up. If I set the resolution to Auto in the NVIDIA X Server Settings, it defaults to 1280X1024 and I can see my whole desktop, but it is streeeeetched. Here is some relevant information pertaining to my system:
I'm using Ubuntu 10.04
Integrated Video chip is NVIDIA GeForce 6150SE
The driver I'm using is NVIDIA accelerated graphic driver (version current)[Recommended]
screen is a Vizio VX20LHD
View 3 Replies
View Related
Mar 6, 2011
I'm currently using ubuntu 10.04 version. I've recently purchased a BenQ E2200HD monitor. However, the monitor is unable to configure a resolution higher than 800x600. I've tried changing it via 'preferences' - 'monitor' etc. The monitor model is 'unknown'. and the highest resolution available is the 800x600.
I've tried changing it manually, but it says x.cong file does not exist. Xrandr doesnt seem to work either. Or i would get CTRC 262. My current set up is, intel i5 2600, 4GB Ram, Nvidia GTS 240. I'm pretty certain, my graphics card (despite being in the low end) can support HD resolution. Even if it can't, it surely can support a resolution higher than 800x600.
View 7 Replies
View Related
Jun 19, 2011
my laptop screen has 1900x1280 (native resolution) and my second monitor has 1600x1080
After browsing the forums and messing around with drivers I managed to get the resolution up to 1600x1080 (from 1000x800 at install) on the laptop screen. No luck at all with the second monitor. I currently have it connected with both VGA and DVI.
my understanding is I need to use twin view to setup the second monitor. I've read several of the earlier posts but haven't been able to get it to work. Here is my current xorg.conf file:
Code:
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Configured Monitor"
VendorName "Unknown"
[Code].....
View 9 Replies
View Related
Aug 22, 2011
After installing Debian for the first time earlier today, I tried to setup my display for a 1440x900 resolution. However, the "Monitor Preferences" setting won't allow me to set a resolution higher than 1280x1024.
View 3 Replies
View Related
Aug 8, 2010
I have inherited a Dell Inspiron 1300 with a 1.6 Ghz Celeron M and would like to fit a Pentium M 765 2.1 Ghz.
My questions are, will i need to update the BIOS after fitting it, or can i just plug and play?
If an update is not necessary, as such, will i see any kind of gains from doing so?
and if an update is necessary will i have to do it from a boot CD?
Also, as a side note, i plan to eventually boost the RAM and install a bigger HD, will a BIOS update be required after fitting either?
View 8 Replies
View Related
Nov 4, 2010
An "Asus VK222S" monitor has been incorrectly recognized as an "Ancor Communications Inc 22" by a fresh Ubuntu 10.10 amd64 installation. This is causing a vertical band of about 5cm, in the middle of the screen, to be out of focus/blurred. The problem was not present with the same monitor on other systems.
View 4 Replies
View Related
Jun 2, 2011
Sometimes when I try to view a website, I get this: [URL]. Is this a problem with DNS? I'd say this happens maybe 3% of the time I try to view pages, and always at the most obnoxious times possible. (Clicking the "facebook.com" link it recommends simply takes me to the same page again, by the way).
View 9 Replies
View Related
Jan 11, 2010
9.10 Problem with Graphics/3D and other I have a Thinkpad T42, 1.7GHz, 1Gb Ram and a Radeon 7500 Graphics card. Everything that I am having trouble with works just fine in Ubuntu 9.04(except for the sound). There are two problems that I think are linked or really the same. First off, When I turn off Compiz(Compiz works by default) then gnome-system-monitor does not work properly. At least the graphics side of it; the window appears black with random lines running threw it. The same thing will happen to Gnome-do if Compiz is off.
The second problem is getting 3d support to work. I installed and tried to run blender and I got this from the terminal:
[Code]...
Then it ether does not open or the computer locks up completely and I have to force a shutdown. Which ever one it does I do not get my desired results. When trying to do chess in 3D it tells that I have 'No Python OpenGL support'. So I install the python-opengl package from the repositories; the program now just errors on start and I had to uninstall python-opengl to get Chess to work again. I have tried all this with Compiz on and off with the same results. Anyways thats about it, unless somebody knows how to setup the sound so a program won't lock it from other, then thats all I am having trouble with.
[Code]....
View 3 Replies
View Related
Jun 3, 2011
I have installed ubuntu on Vmware.I work in Lan environment and I have 2 local linux servers in my office.I have installed nagios on ubuntu.but nagios doesnt show other hosts in office.How to do I add other hosts in the office in nagios so that I can monitor network properly?
View 1 Replies
View Related
May 16, 2010
I 10.04 32bit server edition on a box I had lying around, set it up for samba+upnp, and everything was going great.
When rebooting, the server now turns the monitor off, and I'm not sure if anything's loading. I see the initial dell splash screen, and hear the hard drive start to run, and then the monitor goes into standby.
View 5 Replies
View Related
Aug 1, 2011
I have a dell monitor, E153FPf, with an intel chipset 865G. I just changed from Debian to Open Suse 11.4. In Debian, everything worked fine. However, with Suse, every time I open a new window in Gnome, the screen will flash at about a 1 Hz rate, showing the new window, and then immediately revert to the previously displayed window.
If I change to a different workspace, and then change back again, the display works properly . . . until I open or close a new application window.I made sure YaST2 had the correct refresh and resolution; I downloaded and installed the latest Intel drivers, I enabled the correct horizontal and vertical refresh rates in /etc/X11/xorg.conf.d/50-Monitor.conf - all to no avail. I have searched around for answers, but most of the issues seem to be with monitors not working at all - not new or closed applications not refreshing the screen properly.
View 3 Replies
View Related
Aug 20, 2010
I haven't manually configured XWindows in a very long time, so I'm not very certain what I need to do anymore. Hopefully someone can provide some guidance. I just built up a new system that I'm trying to connect to a 47" LCD TV that provides a VGA connection. When the computer starts booting all of the text comes up just fine (1 or 2 characters on the left are chopped, but otherwise fine). When I tried to run the installer for CentOS5.5 I ran into a problem. The monitor(TV) wasn't getting a proper signal to display XWindows. In an effort to keep going, I reconnected the PC to an old monitor and did the install from there. That worked no problem. I ran all the latest updates hoping that maybe this was fixed in a patch. I then shutdown and reconnected to my TV. no luck. When it starts XWindows the screen doesn't display anything. I've tried fooling around with modifying the xorg.conf and adding an explicit "Monitor" section and set it to 640x480 with a VertRefresh of 60 (which is supposedly an acceptable format), but no luck. Can anyone provide any guidance on how to solve this problem. BTW I do know that the VGA connector on the TV works just fine because I can hook up my laptop (Windows XP) to it.
H/W Monitor: Olevia 747i (when nVidia on my laptop detects it, it is reported as 747-b11) Motherboard: Biostar MCP6PB M2+ Motherboard - Socket AM2+, �ATX, Audio, GeForce 6150 Graphics, SATA, RAID Graphics: Using the integrated GeForce 6150 chipset
View 7 Replies
View Related
