Ubuntu Multimedia :: Unable To Get Sound In MythTV?
Jan 22, 2010
MB: Gigabyte 790XTA-UD4 boards, with internal sound
4Gig Mem, Phenom II CPU, 1 TB HD
HD in: 2 pc5500 TV cards
HD Out: GeForce GT240 out,
I'm getting very frustrated, having dropped a substantial (for me) amount of money trying to get a DVR setup, and Myth TV has punished me every step of the way.At this point, the extreme frustration is that sound *was* working earlier - not going to the TV via HDMI (Which seems like it should be easy but I've yet to get it to work) but I had speakers working - right up to the instant I installed restricted extra's to run mp3's - the instant I got totem to play sound, I completely lost all sound from myth TV, even playing back digital files it has recorded have no sound now.
alsamixer seems to have been used numerous times to fix these issues, but doesn't actually show as a valid package when I check the repository - I installed the gnome version instead, but nothing I do there seems to have any effect.I'm not entirely sure if I need/should be using the patch from the pc5500 cards into the sound card line in - as near as I can tell, that's only for analog signals, and it *was* running happily without it.
As mentioned - sound is fine from everything else, but even playing a recorded file I have no sound playback (Note: I had not recorded anything I can verify *had* sound before). I've gone through various guides, and I got nuthin'. All the actual cards and hardware have every appearance of working.
View 6 Replies
ADVERTISEMENT
Aug 31, 2010
Have installed mythtv to kbuntu (32 bit) and configured the backend with HDHomerun and receive video but no sound The ] key brings op the volume bar but sits at 0 and will not adjust. However caffeine and he HDhomerun conf GUI viewer play the video and sound perfectly.
setting up the backend I never saw an entry for alsa or mixer, it appears somethimg is missing there for HDHomerun, although those are present when I added an entry for a Hauppauge 950Q USB tuner. Can not get this source to work as yet so have not seen the sound problem there.
The speaker test
speaker-test -c 2
also works as do the login/logout sounds and the test in system settings/multimedia.
alsa -l reports
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
[code]....
View 1 Replies
View Related
Oct 13, 2010
that said on to my problem. I have a Hauppauge hvr 950-q that I had been using with 10.04(64-bit) since it came out with no issues at all(non that i could not fix anyways) had mythtv set up using mythubuntu and all was great. I upgraded to 10.10(64-bit) last night and cannot get sound to work during live tv. If i watch an old recording the sound works. Sound also works everywhere else on my system. Before the upgrade the audio setting in the backend configuration of the tv card was set to /dev/dsp2 this no longer works. if i put it at that(i have to enter it manually) then i have no sound and if i try to change Channel the tv feed crashes.
I have tried /dev/dsp2,1 i even tried /dev/snd/contolC1 wich i got from browsing around in /dev and found this to point to my 950-q all with same results.If i use alsa:default as the audio device in the backend i still get no sound but i am at least able to change channel.everything works in TVTime.i am simply at a loss. My next step was going to be a clean install of 10.10 but i thought i would check here before taking such a drastic step.
View 9 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
Jun 8, 2010
I set up Ubuntu on an old iBook G4, planning to use it as a front end to my main box. Installed 10.04 no problem, and from there, used Software Center to install MythTV Front end. Have done the same thing on a netbook, no problem.
However, on this PPC Mac, the front end works fine, navigation, menus, etc, until I try to play a recorded programme - the screen is blank, and I just get white noise from the speakers.
(BTW am trying Ubuntu as I don't have a Mac OS new enough to get any of the current Mac MythFrontEnd builds working)
View 2 Replies
View Related
Feb 11, 2011
After overcomming a lot of difficulties, my MythTV (Via Epia 10000EG with Hauppauge PVR 500 card) worked with Mythbuntu 9.04. Last year it crashed and I had no time to spare to rebuild it.
Last couple of weeks I had more time and downloaded and tried to install Mythbuntu 10.10. Everything seems to be installed ok, but I get no picture in MythTV when I select "Watch TV" and no picture when I try to record something. When watching TV, the message "Please wait" appears for appr. 5 secs and then the system returns to the menu.
I installed Mythbuntu 10.10 and am using the provided IVTV drivers.
Dmesg and lspci give no errors, every seems to be in order, IVTV drivers are loaded, initialized and errorfree. Cat /dev/video0 gives me static in MPLAYER. The MythTV backendlog doesn't even give a message, the frontend log just says there is no picture...
There seems to be an error between the back and frontend. I checked the settings in capturecards, TV sources, channel edits, etc,etc, but I can't find it.
View 7 Replies
View Related
Jan 1, 2010
I'm running ubuntu 9.10 wit mythtv. My dvb card is a haupauge pvr 1250. When I run the backend, this is the output.
Code:
alex@mythtv-center:~$ sudo killall mythbackend
[sudo] password for alex:
alex@mythtv-center:~$ mythbackend
2010-01-01 16:16:39.329 mythbackend version: branches/release-0-22-fixes [22594] www.mythtv.org
2010-01-01 16:16:39.329 Using runtime prefix = /usr
code....
View 5 Replies
View Related
Jan 9, 2010
I've been at this for the last hour. I just put a Hauppage WinTV-TVR-1800 into my machine, rebooted and installed MythTV. I set up the card, the video source and the input as well as configured a few random channels. I click WATCH TV in the menu, it goes to a screen saying, "Please Wait....", then it brings me back to the menu. There's no error, is there some sort of log file.
Here it is run in the terminal:
Code:
deemar@Chugger:~$ mythfrontend
2010-01-09 20:03:05.636 mythfrontend version: branches/release-0-22-fixes [22594] www.mythtv.org
2010-01-09 20:03:05.663 AudioPulseUtil: Suspend Success
2010-01-09 20:03:05.665 Using runtime prefix = /usr
2010-01-09 20:03:05.665 Using configuration directory = /home/deemar/.mythtv
2010-01-09 20:03:06.445 Empty LocalHostName.
[Code]...
View 9 Replies
View Related
May 8, 2010
Are there any viable alternatives to mythtv? I find the setup to be very cumbersome and the keyboard interface is a poor second to Windows Media Player for a basic PVR system on a desktop computer.
Mythtv seems an overkill for what I require, just to simply watch TV using my DVB-T input and record shows when I'm away from home.
View 3 Replies
View Related
May 30, 2010
MythTV Records fine but will not play the recorded shows and I can not watch or open the TV. Running Ubuntu 10.04 LTS lucid Runing a pcHDTV HD-5500 Video card Using on Board Video from an Asus M3A78-EM with onboard ATI Radeoon 3200
dmesg | grep DVB
[ 14.461244] cx88[0]/2: cx2388x based DVB/ATSC card
[ 14.771709] DVB: registering new adapter (cx88[0])
[ 14.771711] DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend). My symptoms are as follows: I can do a manual scan
[Code]...
View 6 Replies
View Related
Jun 19, 2010
I am trying to get mythtv to work with my tv card. I am using ubuntu 10.04 and I have installed mythtv but it isn't picking up my tv tuner card. I have a Hauppauge wintv hvr 1250. I am wondering what I need to do to get it to work?
View 1 Replies
View Related
Aug 3, 2010
I was configuring mythtv and when I was in the video settings I set it up to use OpenGL. Now I can no longer see video and I can't get back to the settings screen to disable OpenGL. Is there a config file that I can edit to disable OpenGL or someway to revert everything back to default. I tried completely removing the frontend and reinstalling it but that didn't do anything.
View 2 Replies
View Related
Jan 23, 2011
I installed mythtv and found channels using mythtv-setup. When i click Watch TV from the myth tv main menu i get a screen that says Please wait... and then it takes me back to the main menu...My tuner is Winfast PVR tv 2000xp Is there any way to get it to work?
View 4 Replies
View Related
Jun 29, 2011
I am trying to watch tv on my monitor with mythtv. I had my card configured correctly. The first half of the Hauppauge 1600 is for analog tuning, so I have to select ivtv from the dropdown menu. I am receiving an error message stating that it cannot be opened. An hour ago It was fine. When It was working fine and everything was normal, I still could not receive any video on the tv. in mythtv. I receive a red screen. The coax cable is running from the wall into the card. I do not want to run it through my cable box for it seems difficult to configure a remote. I went to schedule direct and downloaded the correct guide for my region(which is the US). What could be the problem? I have searched forums and articles. I really want to use mythtv and cease using Windows Media Center. Does analog tv work in Mythtv. I am using the 0.24 version. My operating system is windows xp and I do not have a graphics card setup for tv-out yet.
View 3 Replies
View Related
Sep 1, 2011
What's the accepted method for converting Mythtv's nuv files to avi files now?
I ask this because nuvexport seems to be unsupported these days. The last released version removed support for using transcode to convert the files. This leaves only mencoder and ffmpeg, and these have the following problems:
1) mencoder is much, much too slow. It takes about five times as long to convert a file as transcode ever did.
2) Ubuntu's ffmpeg is crippled, and doesn't work. I realise that there are instructions for installing a version of ffmpeg that works, but as this does not provide any method for creating Debian packages of it, I do not wish to pollute my filesystem with a mish-mash of manually installed software.
Is there any way to convert nuv files with transcode?
View 5 Replies
View Related
Jun 17, 2010
I have a 3 monitor setup with a 9800GT and a 6800GT. The 9800GT is linked to my main monitor (20" viewsonic 1680x1050) and a 40" Toshiba 1080p LCD TV. The 6800GT powers a secondary 1280x1024 dell LCD. I have the SPDIF connector plugged into the 9800GT and in sound preferences Hardware tab I have Digital Stereo (IEC95 output selected, but I get no sound on the TV. PS All three are on separate x-screens.
View 4 Replies
View Related
Jul 13, 2010
Ive recently switched to Ubuntu from Windows XP and me and a friend had finally got things going for me, with everything running pretty darn well. A couple days ago we decided to install VirtualBox with Windows 7 and for a day everything worked well enough but yesterday I discovered that I had no sound whatsoever on Ubuntu but oddly Win 7 on VB had audio running without any discrepancies.
View 4 Replies
View Related
Aug 7, 2010
When ever I install windows I have to manually install this [URL]Well. I downloaded wine and tried it and it said Unknown error. So, how would I go about getting my sound driver then? I really need sound I do not have anything under Hardware, Output or Input in the Sound preferences. I've already tried OSS, I think I installed ALSA but I do not know how to work it. I've downloaded a tar.bz2 pack for alsa, where is a deb. I hate configuring stuff, I want something I can click and install.
Code:
Audio
Sound Card
SigmaTel High Definition Audio CODEC
Playback Devices
Digital Output Device (S/PDIF) (SigmaTel High Definition Audio CODEC)
[code]....
View 9 Replies
View Related
May 4, 2011
Prior to the release of the update 11.04 I had sound working perfectly. When the update came out, I lost all sound. I have run through all the forums and threads and websites I can find trying to find a fix, no luck. I have no start up sound, no sound from any program. I installed PulseAudio and it shows that there should be sound, but neither speakers nor headphones have sound coming from them.
View 7 Replies
View Related
May 16, 2011
I am using mpd and ncmpcpp as a music player. Until today it worked perfectly fine but now when I play a song it begins playing but with no sound (yet sound works in every other program). I am using a creative x-fi xtreme gamer sound card.
Here are my configs:
~/.mpdconf:
Code:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
[code]....
View 9 Replies
View Related
Jun 26, 2011
I get no sound. Not even the little signature tune you're suppose to get when you start up ubuntu. When I go
Code:
aplay -l
I get:
**** List of PLAYBACK Hardware Devices ****
card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4]
Subdevices: 1/1
[code]....
Then I tried the alsamixer just too make sure that the speakers was not muted.
Code:
alsamixer
The last thing I tried was adding my user name to the /etc/group. Before it was
Code:
audio:x:29:pulse
but now it says
Code:
audio:x:29:myusername
is where some bullet proof way to test the sound card? Now I'm running some random mp3 which might have some fault in itself. what must I do to get the sound to work?
View 3 Replies
View Related
Feb 12, 2010
I'm trying to set up Ubuntu with Boxee and MythTV as a media centre. I'm currently stuck at displaying a picture on my TV screen. I only have an Intel onboard graphics chip, and so I bought a VGA-to-TV box to convert the signal. This is USB powered and has VGA in, S-Video, Component and VGA out. I have it connected to an external monitor by VGA and to the TV by component cable into a SCART adapter (along with a mini-jack to phono cable from the sound card).
I was hoping that the box would handle the settings for the TV screen, but all I'm seeing are flashing lines of colour, so I'm guessing I have to change the settings. Eventually, I want to get the TV to be widescreen, but I'd like it to work first! I have created an xorg.conf file and put in three extra modes.
- first, an 800x600 VGA to PAL TV converter from [URL]... - second and third, two resolutions generated by the calculator, based on the SwitchResX settings for my MacBook to connect to the same TV. Now I'm sure you want to see a whole load of settings from my machine, but sadly I don't know what settings you'll need to see.
View 1 Replies
View Related
Mar 28, 2010
I am working on a Mythtv frontend/backend/desktop and am at a loss. The goal is to use myth to record programming from the free broadcasts (i fired the cable) and the desktop to watch flash video of the shows that aren't on the broadcast networks...like TNT, natgeo or the comedy channel. Software is Mythbuntu 9.04 running nvidia 180 drivers
I imagine the hardware is adequate, it is well above minimum specs that I can find.
AMD Athlon 3000+ processor
2gigs of PC2700 memory
Gforce 6200LE 512MB DDR2 video card AGP
Hauppage HVR-1600 tv card PCI
I have two problems, well three now if you count the crashing firefox. Myth TV is working fine. There was a conflict with the video card and the tv card. But now when I try to view flash video it is jittery...Firefox has started crashing now and that is a new thing. It will allow me to start a video and the the window will just close with no warning. I tried a local radio stations website and it did the same thing. When I connected to pandora it worked but I could only get the songs to play for around 30 seconds before it would skip to the next one.
I wanted to have the Gnome desktop instead of XFCE but nothing I do seems to change it. With that explanation in mind:
Is this hardware enough for what I want to do?
Is loading Mythtv first then adding gnome the best solution? (if not, I think I can redo the Mythtv setup and conflict resolution again without cracking up).
View 3 Replies
View Related
Apr 27, 2010
is there any simple way how to upgrade 0.22+fixes (under Mythbuntu 9.10) to 0.23+fixes? For example any debian package (which I didn't found) to download and simply unpack and install? I'm afraid that if I modify this MythTV, Open Source DVR for 0.23 and use it on 9.10 with 0.22 I'll have problems with directories and so on...
View 1 Replies
View Related
May 18, 2010
I use MythTV on my Ubuntu laptop to watch tv from my DVB-T card here in Belgium. This worked fine untill a while ago. It then started showing the TV image in a horizontal splitscreen (see attached image). However, when I press pause, the image is just fine!
View 4 Replies
View Related
Jun 28, 2010
I have a PowerPC installation (fully patched) of Ubuntu 10, and I pulled down the MythTV suite on top (since there is no Mythbuntu/PPC that I found). I'm having an issue where after I scan for channels with my tuner using mythtv-setup, I can't set the starting channel number. Its almost as if nothing ever populates into the drop down. This seems to be specific to the combination that I have - Ubuntu 10 + PPC + Myth 0.23. If I use another x86 + Myth .21 and the same Tuner (HDHomeRun), I can set the starting channel fine. A Mac OS 10.4 + Myth .21 also allowed me to set the channel. I've rebuilt this install twice now and it won't allow me to set it. I can see the scanned data in the mythconverg database, so I know its there.
View 1 Replies
View Related
Jul 1, 2010
I'm trying to setup MythTV, but whenever I do so, I get no text on the X window setup screen. The language selection takes a very long time (input is super delayed) and I don't see anything on the screen. This last time I ran it it went the farthest it has gone before, but it always hangs at the theme file selection, as shown by this Terminal output.
Code:
Loading window theme from /usr/local/share/mythtv/themes/Terra/menu-ui.xml
Loading menu theme from /usr/local/share/mythtv/themes/defaultmenu//mainmenu.xml
[code]....
View 1 Replies
View Related
May 4, 2011
I've looked everywhere for this and I can't find an answer. I've got a hauppauge wintv-1250 card; ubuntu and mythtv recognize it OOTB. The dvb digital tuner portion of this card works great. I had quite a time figuring out how to set it up, but it all works pretty good now. nyway, the only problem is that I need to record 2 sources: 1 is RF, the other is from an analog cable box. So, I figured I should be able to record analog video from the s-video input. Is this possible with mythtv, and if so, how? I could watch it in windows with the software that came with the card, so I know it's possible, but I'd rather avoid windows if I can.
View 1 Replies
View Related
May 25, 2011
I've been doing alot of reading but i cant seem to get my HVR-1250 card working with mythTV, my system see's it but i cant get myth TV to recognize it? it doesnt come up in the "probed info" in the backend, do i have to just plug in the right info and not worry about that or what?
sudo lshw -C multimedia output:
Code:
*-multimedia
description: Multimedia video controller
product: Hauppauge Inc. HDPVR-1250 model 1196
vendor: Conexant Systems, Inc.
physical id: 0
bus info: pci@0000:02:00.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pciexpress pm vpd msi bus_master cap_list
configuration: driver=cx23885 latency=0
resources: irq:17 memory:fe800000-fe9fffff
ubuntu 10.04 32 bit
AMD Atholon dual core
View 4 Replies
View Related
Nov 11, 2010
I am running Ubuntu 10.10 which is great but since yesterday i have not been able to get a sound out of the speakers?
View 3 Replies
View Related
