I installed ubuntu today and noticed that the sound isnt right.. It sounds like you hear music with you hand on your ears.. So i looked on the internet and found this: [URL] The first thing it makes me do is stop the alsa-utils deamon BUT.... I dont have alsa-utils.... when i go to /etc/init.d/ i only see alsa-store & alsa-restore. nothing else.. (this is on the MSI GX740 laptop)
View 5 RepliesJust updated Meerkat - and the alsa-utils update did not go well. Aptitude reported an error trying to config. Anybody else with this problem? Workarounds or do we wait for a few days till the maintainers fix it?
View 2 Replies View RelatedI want to install the Empathy on my CentOS. And I configured, then I got a resposes:
checking gnome-doc-utils >= 0.17.3... no
configure: error: gnome-doc-utils >= 0.17.3 not found
But when I run "yum install gnome-doc-utils"
The system respond:
[root@localhost ~]# yum install gnome-doc-utils
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Setting up Install Process
Package gnome-doc-utils-0.8.0-2.fc6.noarch already installed and latest version
Nothing to do
Install cifs-utils on wheezy armhf
apt-get install cifs-utils --fix-missing
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code] ....
I have recently been forced to do a hardware upgrade (my previous mobo died). Now, sounds works ok with,amarok because kde has recognized the new hardware and switched to it.
..... does not work, likely because flash uses alsa-oss which is probably not configured automatically. I have tried uninstalling and reinstalling both alsa-oss and flash, but it didn't solve the problem.
My sound card isn't being found on F13, it's a VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60). I ran alsa-info and posted it to the following url:
[URL]
I've had these problems before intermittently and it was working until I rebooted recently. I've also attached my yum log if there was something updated that affected it.
My sound stopped working.
Code:
$ aplay -l
aplay: device_list:240: no soundcards found...
But:
Code:
$ sudo aplay -l
**** List of PLAYBACK Hardware Devices ****
Home directory /home/georgii not ours.
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Same with alsamixer:
Code:
$ alsamixer
cannot open mixer: No such file or directory
But:
$ sudo !!
shows me the mixer.
Anyway, the sound is just gone. When I do: .....
It says: "PulseAudio seems to have crashed. Do you wish to report a bug?", then crashes.
After compileing my kernel i get no sound. I tried : alsaconf - choose my sound card - everything is all right, but when i try alsamixer i get : No mixer elems found
[Code]....
I'm trying to update ALSA, following the instructions here: SDB:Alsa-update - openSUSE.I'm not sure how to proceed at STEP THREE. There are two sets of instructions, based on whether or not the kernel has been updated. I'm not sure if it has been. How can I make sure?
View 2 Replies View RelatedI found one error in my MPD log.
Code:
Apr 28 22:25 : can't find alsa mixer control "PCM"
I have been trying to get this web cam working for a long time. lsusb:
Code:
Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.
dmesg
Code:
[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
[Code]...
I'm currently using Ubuntu 9.10 and since I've installed it, I don't have any sounds at all. Sounds work fine on windows. My version of alsa is 1.0.21. I made sure that I've got nothing muted in alsa mixer and it seems that ubuntu detects my sound card.
Card is HDA ATI SB
Chip: IDT 92HD75B2X5
Having had many problems with pulseaudio on a fresh karmic install, I followed some recommended instructions for removing pulse and using alsa (URL...). unfortunately, both pulse and alsa have gone and i'm left with oss which seems to work fine. I'd like to have alsa back though.When I open amarok, it plays the frst song on the playlist then pops up a series of 'could not initialise sound engine' messages, and crashes.
View 5 Replies View RelatedUbuntu 10.04, 64 bit. Sound was working well, thought I would run some scripts [URL] to install the latest version of alsa, but now I have no sound at all. The command aplay -l gives:
aplay: device_list:223: no soundcards found...
and the command
cat /proc/asound/version
produces:
cat: /proc/asound/version: No such file or directory
I no longer have a directory /proc/asound.If I open the window system>preferences>sound
there are no entries under hardware or output.I have tried to re-install alsa with this command:
sudo apt-get install --reinstall alsa-base alsa-tools alsa-tools-gui alsa-utils alsa-oss linux-sound-base alsamixergui
but still no sound.
Hardy Heron includes ALSA 1.0.15 but I need at least 1.0.16 to make VMWare player happy with it. I couldn't find the packages in backports, but maybe I missed it.
View 2 Replies View RelatedI have a lenovo G555, and there are plenty of forum posts complaining about the headphones not playing or muting speakers etc. I found two fixes for this issue in ubuntu 10.04.
[Code]...
I'm having trouble after installing Lubuntu-desktop on top of a Ubuntu Server (64 bit). about the reason for this abomination of distributions is to achieve 64 bit Lubuntu. I used to run Ubuntu 64 straight, but didn't like Unity at all; Arch Linux was great up until now, but I'd like to settle down and focus more on productivity.
The situation is thus: I cannot manage to make my X-Fi USB sound card work without hacks, and at best it only works in some applications. I *think* it may be a bug in ALSA, but I had no problem in the latest versions of Ubuntu (11.04 as of this) and Xubuntu even (11.04?).
I can currently only play media in VLC media player using the following hack in my ~./asoundrc
Code:
This works as expected, but not for many applications (which fail to launch, with a error message related to below (no mixer controls))
Code:
What could I be missing? Some diagnostic information (any other information on request):
Code:
I also posted this question here: [url]
Running songbird, have been just fine for months, now every time I try to play a file I get "autoaudiosink and alsasink are missing." I can cure this by following the "Getting the ALSA drivers from a *fresh* kernel" instructions in the comprehensive sound solutions guide. But I have to do this *every time* I restart my computer. How can I fix this permanently?
View 4 Replies View RelatedI have an HP-dc5800 computer, and my internal speaker was not working, no matter what i did. However, i could get sound with headphones. Here is what i did to fix it. It may work for you.
sudo gedit /etc/modprobe.d/alsa-base.conf Add options snd-hda-intel model=hp-m4 enable_msi=1 to the end of the file. I changed model=hp-m4 to model=hp-dc5800. So, changing the model to the model of your computer may work. Underneath that, i put in; options snd-hda-intel enable=1 enable_msi=1 single_cmd=1 power_save_controller=1 here is a list of some of the models. http://www.kernel.org/doc/Documentat...dio-Models.txt
I tried to install OSS to see if it would allow my mircophone to work properly in the WinXP guest I was running in VirtualBox. I couldn't get it to install properly so now I'm left without any sound on my system. I was wondering how I could get rid of what ever files from OSS that are left and reinstall ALSA.I'm running Ubuntu 9.10.
View 1 Replies View RelatedOSS, even though it's emulated *through* ALSA, consumes a microscopic fraction of straight ALSA's CPU usage. For example, when I'm playing something through ALSA with XMMS2, I'm getting about 25-30% CPU usage, but with OSS output, only 2%, tops. The same applies to any other application in which I can choose the output method. And, I'm on 10.04.
View 1 Replies View RelatedMy audio was working just fine up until today, when I was working on some audio production stuff. I did QjackCtl, and also ran pulse-jack so I could use another app not in jack. Now, upon a boot up, there is no gnome-volume-control-applet or gnome-volume-control running. When I run gnome-volume-control it says there is no sound device (without Jack running). When I do it with Jack and Pulseaudio running (doing QjackCtl and pulse-jack), gnome-volume-control shows info about jack, but no hardware. I have sound, I just can't affect it volume-wise, etc. When I run pacmd I get this:
$ pacmd
Daemon not responding.
When I close QjackCtl I then get an error in a window that says merely: Waiting for sound system to respond.
I have Ubuntu Lucid. If i dont' mistake, it should be possible to hear several applications playing sound simultaneously, with ALSA. But if 1 app is already playing, then starting a second one give always "device is busy".
View 2 Replies View RelatedI finally ditched PulseAudio and set up my system with a realtime kernel. I'm redirecting ALSA over JACK. The good: - Awesome, I can get <5ms latency without any xruns! (although 23.2 msec as described below is just fine for me) The bad: - I'm a long-time linux audio user, but have got some minor issues which spoil the fun.
1. Without pulseaudio, the indicator applet refuses to show a volume control applet. The old gnome-volume-control-applet (the one with tooltip!) loads but doesn't show in the gnome-panel. Although I can set the volume with envy24control, it's not quite as practical as using the scrollwheel! Any way to fix this?
2. When I launching any application (such as a terminal) from the gnome-panel, a new JACK connection is created, but not cleaned up after closing the application. As a result, the QJackCtl connection list is flooded with alsa-jack.jackP.8528.xx connections (where 8528 is the process ID of gnome-panel). The jack_lsp command line program shows the same (added spaces after every : to get around the smiley filter):
[Code].....
I recently converted an amd 64 bit WINdows machine to Lucid 64 bit. Everything has gone well. I had numerous issues with Pulseaudio that I removed it. Sound with Alsa has been great, including system theme sounds. I can record via a mike as well. What I cannot do is to capture sounds coming through the sound card. When I record I am getting empty files. The mixer indicates that there are two capture devices. Here is some data on my audio card.
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog
[ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital
[ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI
HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
So I tried to install OSS to see if it would allow my mircophone to work properly in the WinXP guest I was running in VirtualBox. I couldn't get it to install properly so now I'm left without any sound on my system. I was wondering how I could get rid of what ever files from OSS that are left and reinstall ALSA. I'm running Ubuntu 9.10.
View 9 Replies View RelatedI was having a problem with ALSA, installed OSS, but now nothing works. I want to remove OSS, and reinstall ALSA. I am thinking about reinstalling, but I have all my stuff on here, so don't really want to.
View 4 Replies View RelatedThis is a fresh install of 10.10 (although I had the problem on 10.04 as well). I have installed MythTV on here (via apt-get, its not MythBuntu), and use the system primarily for that. Myth works great, sound in everything, no problems.
However, not much else can play sound. Firefox (.....), totem, mplayer, all nothing. Either just no sound or crash. If I can set them to use Alsa (eg: VLC), then they work.
System is an Asus P5B and on-board sound. I've also got an Nvidia GT210 and would like to use the HDMI out, but can't get anything at all to go through this. Don't know if thats related or not. Sound problems existed before adding the GT210.
One strange thing is, I can go into Preferences -> Sound -> Hardware and click "Test Speakers". Of course nothing plays. However, if I then set the onboard card to "Off", and then back to "Analogue Stereo Duplex", then click "Test Speakers", the left speaker works (right is still silent). But from then on, Pulse apps can play sound, until next reboot. Having FF open on a ..... video or something similar prevents Myth from playing sounds however.
What can I do to get sound working sanely? I don't need optical out, surround or anything. Simple stereo will be fine at this point, via either the onboard or the GT210.
I am unable to play a DVD on my laptop. I have a DVD burner; and I always get the same message(s).error reading from DVD or "an error occured: location not found"I am actually trying to rip a few clips from some dvds i just have not gotten that far yet.so what do i have to do to play the dvds?and is there anything more i will have to do to rip them.
View 2 Replies View Relatedi am having a problem with skype that i wasn't having before, and afaik skype hasn't been upgraded recently, so something else presumably has changed.
because of driver issues i have to use an external usb audio interface to do voip. this interface is not connected to the pulseaudio server. i am able to connect it to jackd and it works fine for both audio in and out. however it no longer shows up in the list of sound devices available to skype. this used not to be the case. i have tried stopping and restarting skype, as well as unplugging and reattaching the interface. the interface does not show up in pulseaudio manager in the lists of devices.