I am on amd64, Lucid Lynx (10.04). Using the latest mplayer (MPlayer SVN-r31042-Ubuntu-RVM).
I'm trying to play a hi-def wmv. I get video and audio, but there is definitely some audio missing. The center channel is gone. I have music and sound effects, but the characters dialog is silent.
PC seems to run fine in single channel mode but monitor reports no input in dual channel mode and memtest86+ lists from 1-3 errors per pass in single channel mode. Motherboard (Gigabyte P43T-ES3G) can't be set for the 1.65 volts required by the RAM (2x2 of OCZ3P1333LV4GK PC3 10666). The mobo voltage choices are 1.6 or 1.7 volts. I have tried both and increased the MCH voltage from 1.1 v to 1.2 v, but so far can't get it to run in dual channel mode at all and single channel mode seems to run fine but I still get errors in memtest86+. Also tried optimized Bios settings and loosened memory timings (from 7-7-7-16 to 8-8-8-27 and tRFC 60 to 70) and reset Command Rate from 0 to 2. CPU is Core 2 Quad @ 2.4 Ghz, PSU is rated at 400 watts, Video card is Gigabyte GT220.
View 2 Replies View RelatedI'm trying to crack my wep password just for kicks, but I keep running into the same error. When I try to use airplay-ng for the packet injection, it always gives me the error " wlan0 is on channel -1, but the AP uses channel 6". I've tried setting wlan0 to channel 6 manually, but that doesn't help. I spent a while searching for a solution, but it seemed like each page had a different, usually highly complex solution, that still doesn't work. I have the most recent drivers for my wireless card, and it meets all the requirements. So, is there any solution to this that will actually work?
View 9 Replies View RelatedThinking about building a new system, with 4GB of DDR3 RAM. I am just wondering, which would you prefer: Dual-channel DDR3 or Quad-channel DDR3? Does one have better speed performance over another? Will one way keep your system cooler?
View 2 Replies View Relatedhow can i stream a new radio channel that uses mms example :[URL]
View 2 Replies View RelatedI was hoping that upgrading to 10.04 would fix my problems with sound and HDMI but alas it doesn't. I have an HP dv7 that I wish connect via an HDMI cable to my HDTV and play things like Hulu, Boxee, etc. with the sound coming out of my home theater system. I know that the hardware is capable of doing this because I have Windows 7 installed in a dual boot and it has no problems with pumping sound down the HDMI channel.
I've upgraded to Alsa 1.0.23 freshly compiled. With 1.0.23 I see HDMI settings in Pulse Audio Volume Control. However if I start say VLC and play a video, check pavucontrol and make sure the Playback is set to the HDMI channel. I can hook up the HDMI cable and I can see the video playing - but no audio. I've been in and out of all kinds of things like alsamixer, gnome-alsamixer, sound preferences, etc. and I've toggled things on and off in an attempt to get HDMI sound working but nothing works.
In alsamixer if I hit f6 I see my 0 card as HDA Intel and my 1 card as NDA NVidia. If I select NVidia I see only S/PDIF, S/PDIF 1, S/PDIF 2, S/PDIF 3. I can only mute or unmute these. I've tried both - nothing works. Let me know what sort of output/info you need and I'll post it. Here's some info I've seen others post:
[Code]...
I have a problem. I have two soundcards on my system. One is a on-board soundcard and the second is USB M-audio JamLab. When I play sound on any of them, left channel doesn't play
View 1 Replies View RelatedMy motherboard is Intel DG31PR with 5.1 Realtek HD on board sound card I can't find 5.1 options on sound preferences on ubuntu 10.10... how can i setup a 5.1 audio channel...?
View 5 Replies View RelatedIt seems that when I start up any video in VLC recently that it automatically opts for the left only audio channel. This means that I have to go into the audio options with every movie or show I watch and switch it to stereo mode. I was wondering if anyone knew a way to get VLC to automatically start up in stereo. The videos I have been watching have stereo audio so that is not the problem. I have worked though all of the advanced audio options and I haven't found a way to be able to set this up.
View 2 Replies View RelatedI have a PowerPC installation (fully patched) of Ubuntu 10, and I pulled down the MythTV suite on top (since there is no Mythbuntu/PPC that I found). I'm having an issue where after I scan for channels with my tuner using mythtv-setup, I can't set the starting channel number. Its almost as if nothing ever populates into the drop down. This seems to be specific to the combination that I have - Ubuntu 10 + PPC + Myth 0.23. If I use another x86 + Myth .21 and the same Tuner (HDHomeRun), I can set the starting channel fine. A Mac OS 10.4 + Myth .21 also allowed me to set the channel. I've rebuilt this install twice now and it won't allow me to set it. I can see the scanned data in the mythconverg database, so I know its there.
View 1 Replies View RelatedI have a creative sound card (ca106 driver) detected and working. This is a 5.1 capable soundcard and i also have 5.1 speaker system. The sound card works, however, the problem is that only the front speakers are working. I have checked vlc settings, in which front speakers, centre and rear are seen as different devices.
View 4 Replies View RelatedDoes anyone know how I can force single channel sound output? I'm deaf in one ear and want to mix the channels (especially when I need to use headphones).v
View 3 Replies View RelatedIs it possible to convert a 2.1 channel mp3 or any video file to get a respective 5.1 file permanently so I could play them on external music system which is 5.1 speaker system. Any sites where i can usually songs n video with 5.1 channel.
View 2 Replies View RelatedI'm running MythBuntu 10.04 32-bit on an ASUS DualCore Atom + NVidia ION chipset. It's taken me a while to get it all working (still not there yet on the remote!), but there are a couple of glitches with the tuner card.
10.04 appears to have the kernel modules already, so I installed the firmware following linuxtv.org instructions and got it working pretty quickly in MythTV. I've since built the latest stable kernel module and updated the firmware to v4l-saa7164-1.0.3-3.fw which appears to be the latest. Same issues in both cases anyway.
Problem 1: The picture using /dev/dvb/adapter1 breaks up / stutters like there's a poor signal, although it says 90+% and /dev/dvb/adapter0 is rock solid. When I try with mplayer it plays but gives lots of errors on the second tuner, but I guess that's not surprising. Example output:
Code:
[mpeg2video @ 0x3d466c0]ac-tex damaged at 29 102 17% 0% 1.2% 0 0
[mpeg2video @ 0x3d466c0]concealing 45 DC, 45 AC, 45 MV errors
[mpeg2video @ 0x3d466c0]concealing 34 DC, 34 AC, 34 MV errors% 0 0
[mpeg2video @ 0x3d466c0]concealing 7 DC, 7 AC, 7 MV errors1.2% 0 0
Problem 2: Switching channels takes a good 7-10 seconds even on tuner 1. The screen goes black, then you get a tiny fragment of the original channel before the new channel kicks in.
How do i change the channel gnome-volume-control controls? I want it to control pcm but it controls master front. There used to be a setting right in the sound preferences but i think it disappeared with the 9.10 upgrade or at least i can not find it anymore. I've looked on the at gnome alsa mixer while changing the volume and master front gets controlled while pcm is always set to max. The problem with this is that master front does almost nothing to change the actual volume.
If i control pcm with the alsa mixer the volume range is fine. I've found a manual for gnome-volume-control on [URL].en and the pic there actually looks like i remember it looking. But i can not get to that screen. What i have looks completely different. Its a window with the tabs Sound Effects | Hardware | Input | Output | Applications. But there is no sight of any channel settings and the only slider there does the same as the applet one.
Or at least that's what I figured, when watching videos from ....., etc., the sound in the left channel turns into distorted high frequency noise, anyone had the same issue? Is there a fix for this? Sound in other applications works just fine.EDIT: Oh, and I'm using the proprietary flash plugin, has worked just fine on my Ubuntu Studio on the exact same computer.
View 5 Replies View RelatedI have a Creative SoundBlaster live SB0490 USB sound card. Alsamixer only shows a mic channel for this card although it has a line in. Is this because it is not supported or how it is meant to be? I have problems with no audio out on a program which directly accesses the card as hw:1 although it is actually using it and wonder if this is all related. Strangely I can play sound through the card using rythmbox.
Code:
uname -a
Linux gvj-laptop 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686 GNU/Linux
gvj@gvj-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
[code]...
I have installed Tvtime and XawTv applications and I am currently trying to configure both these applications to detect my tv tuner card (pixelview play tv pro with conexant cx2388 chipset). configure both video and audio with channel scan for my tv tuner card?
View 2 Replies View RelatedI'm having a problem running Mplayer in Ubuntu 9.1. I've installed and uninstalled several times. Mplayer refuses to open from the applications menu.n I attempt to open from terminal it comes up with the following: mplayer: error while loading shared libraries: /usr/lib/i686/cmov/libavcodec.so.52: file too short I've also tried other players such as Gnome Mplayer to play the video and it plays really fast with no audio or video. This has really been the only problem i've run into since switching from windows to linux two weeks ago.
View 3 Replies View RelatedI've installed both mplayer and mplayer-gui packages, but I cannot find and launch mplayer with graphical interface. I want the classic mplayer's gui and seems that isn't there after installed. Doesn't appear ind applications on launcher and when I'm trying to run from terminal the mplayer-gui command I get the error:command not found. So, where is mplayer-gui and how to get it back. This problem doesn't exist in any previous ubuntu version.
View 3 Replies View RelatedI'm currently using Debian Testing with Debian Multimedia Sid repos. The current Mplayer (3:1.0~rc4+svn20110308-0.0) seems to be broken - I can't encode AAC to AC3 on-the-fly anymore. I'd like to compile the latest snapshot or SVN version, but what is the easiest way to compile it with the same options as the one in debian-multimedia.org?
View 3 Replies View RelatedI am trying to take advantage of VDPAU for playing video files with my ASRock ION 330. As far as I know, MPlayer and VLC both include VDPAU support. Ok then, I managed to make MPlayer work from the command line:
mplayer -vo vdpau -vc ffh264vdpau ./filename.mkv
In this way it plays a 720p content smoothly, with under 10% CPU use. Great!The problem is when I try to make this permanent, i.e., configuring the files ~/.mplayer/config and ~/.mplayer/gui.conf.This is what I have in there:
config
======
vo=vdpau,xv,
vc=ffh264vdpau,ffmpeg12vdpau,
[code]....
But still, when I open MPlayer from the menu, no matter what file I try to open it gives this ugly message:Error opening/initializing the selected video_out (-vo) device. With regard to VLC, I had no luck, although I am using the latest "1.0.3 Goldeneye" version, I don't know how to make use of VDPAU.
Running Lucid Lynx. VLC works fine but Xvmc output uses less CPU on my PIII 750 laptop and isn't supported by VLC. I installed Mplayer but I can't play anything from the Mplayer GUI. I get the message "FATAL: Could not initialize video filters (-vf) or video output (-vo)". The interface is all black so I can't see the controls. I installed Gnome Mplayer GUI and now I have different problems. Playing video files, including VOB files from a DVD works fine. Trying to play a DVD with or without menues does not. I followed the instructions at URL.... What could be wrong?
View 3 Replies View RelatedSo I'm running Ubuntu 10.10 64-bit on an HP Mini 210-1190NR. Everything runs fine except mplayer. I installed mplayer from the repos but when I try to play a video I get no sound. I can't figure out why.
Here's the output:
Code:
mplayer star.wars.the.clone.wars.s03e10.720p.hdtv.x264-ctu.mkv
MPlayer SVN-r32636-4.4.5 (C) 2000-2010 MPlayer Team
160 audio & 350 video codecs
Playing star.wars.the.clone.wars.s03e10.720p.hdtv.x264-ctu.mkv.
Cache fill: 3.12% (262144 bytes)
[Code]...
I'm trying to use mplayer to stream some content from the net to my desktop. This worked fine the first time I did it (though failed dismally on all subsequent occasions. Now, the first umpteen times, I was behind a proxy. Now I am not behind a proxy, but mplayer still looks for the proxy settings. Why? I have changed the proxty settings in the network proxy (applied globally), in Firefox and every where else I can think of. I use the following command:
Code:
mplayer -dumpstream -dumpfile ~/Desktop/<desired_filename>.avi http://<source>.avi
and I'm told in response
Code:
Resolving www<proxy> for AF_INET6...
What gives? Why is mplayer trying to use a proxy, and how can I tell it not to?
So I've got old components from my previous computer I'd like to use to build a media center. Here's what I have:
Case
550W PSU
MSI K8NEO 4 Platinum MOBO
[code]...
I'm looking for some advice for setting up a media center, which will be hooked up to my flat screen TV. I think I've got most of the technical bits figured out with an Acer with 4 gigs of memory. What I need are some words of wisdom about choices for software and the like:
Is it worth the trouble to install Boxee or XMBC, or to play music and videos using VLC, etc.? I realize I won't be able to stream Netflicks without Boxee, but I haven't decided if that's a breaking point or not. Do I want to connect the computer to the TV screen directly through HDMI, or connect the computer to my receiver, which is already hooked up to the TV? I'm cheap enough to want to take advantage of the receiver, but I'm also wondering if sound quality will be better, since it's connected to my speakers and the TV just has internal speakers. Remote. Do I want to try and figure out how to use one of the several remotes that I currently own, or is it just easier to buy a computer-compatible remote?
It doesn't matter if I set the audio to 5.1 or 7.1, the center and LFE are silent. I had the same problem in 9.10 but I could work around by using the alsamixer to set the center to 90%, quit, then set back to 100%. This doesn't work in 10.04 as the controls in the alsamixer can't be changed. Is there any way I can get the center channel working? All I can do at the moment is set the sound properties to 4.0 so that the center channel is automatically redistributed to the other channels, but that isn't a great solution.
View 2 Replies View Relatedwhat do i need to write to get the mediafile info from mplayer?
View 6 Replies View RelatedThe DVD is mounted. From the console, I input "mplayer dvd://", and I receive the following output:
MPlayer SVN-r29237-4.4.1 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
[code].....