Ubuntu Multimedia :: No Center/LFE - Other Channels Work - 10.04 / X-Fi
Apr 11, 2010
It doesn't matter if I set the audio to 5.1 or 7.1, the center and LFE are silent. I had the same problem in 9.10 but I could work around by using the alsamixer to set the center to 90%, quit, then set back to 100%. This doesn't work in 10.04 as the controls in the alsamixer can't be changed. Is there any way I can get the center channel working? All I can do at the moment is set the sound properties to 4.0 so that the center channel is automatically redistributed to the other channels, but that isn't a great solution.
View 2 Replies
ADVERTISEMENT
May 10, 2011
I have noticed a few threads on getting sound to work properly. I had a problem getting my internal sound card to work on 5.1 channels and investigated the links and information given in the various threads and found that there are slight differences from the references to what I had to do. Firstly, it's a good idea to read through these links first.
[Code]....
View 3 Replies
View Related
Jul 19, 2010
Has anyone had experience building a dedicated multimedia center? I know Its going to be ubuntu based and probably run xbmc. I've seen a pc case to use but I dont know if the remote control for it can work under ubuntu or any other distro. Has anyone had success making a remote control for an ubuntu based media center work?
View 3 Replies
View Related
Jun 24, 2010
I've installed RPMforge and Smart Package Manager.
I had to create my own Centos 5.5 channels to sync yum repos and smart channels.
Here's the Centos 5.5 channel file for Smart:
Just shut Smart PM down, copy this file into /etc/smart/channels, and restart smart.
Smart should then detect the new channels (repos) for Centos 5.5
Update your channels in Smart, and you should then have yum repos and smart channels both in sync, looking at the same set of packages.
Copy this to CentOS-Base.channel, and add it to the /etc/smart/channels directory.
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
[Code].....
View 2 Replies
View Related
Nov 23, 2010
There was 11.2/pulseaudio. Everything worked fine. After some software update channels became misplaced (system considered side channels as a front), pulseaudio stopped working at all and was removed. After upgrade to 11.3 mics stopped working. Current state:
Code:
> speaker-test -Dplug:front -c2 -twav
speaker-test 1.0.23
[code]....
View 3 Replies
View Related
Apr 11, 2011
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI [URL]
- Video resolution seems to change during video playback [URL]
- Channels cannot be found via DVB-S
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
when I try to scan for any available satellite channels to use in Myth, I cannot find any channels. I have invoked "scan -V -l UNIVERSAL -s 1 -a 0 /usr/share/dvb/dvb-s/Astra-19.2E" with the following result:
Code:
scanning /usr/share/dvb/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 5
>>> tune to: 12551:v:1:22000
[Code].....
View 2 Replies
View Related
Apr 8, 2010
i installed Ubuntu 9.10 and it seems i can't have 5.1 sound playing, i've searched a lot but i still haven't found a solution to my problem. tried to change the default channels from 2 to 6, as well as the default-channel-map and much more but still nothing works..
View 2 Replies
View Related
May 24, 2010
I have installed mythbuntu 10.04 and installed my tv tuner (saa7130). I can play games on composite but cannot scan for tv cannels. how i can scan for channels because he cannot find a single channel (I think this is weird) ?
View 2 Replies
View Related
Aug 15, 2010
I am trying to configure my Kubuntu desktop since some time to have Mumble working perfectly... It was running in the past, i re-installed some days ago and now i have a huge problem. Basically, capturing the microphone works and it's sent to Mumble, however everybody also hears my desktop sound. I tried adjusting channels in KMix with no luck. Also i don't understand why the capture channels are enabled and must stay at minimum volume...
View 2 Replies
View Related
Feb 10, 2010
I'm trying to scan for analogue cable channels. How do I go about this?
I'm using the Hauppage HVR-1950 in Karmic.
After initial setup I'd like to use a program other than MythTV.
View 3 Replies
View Related
Jul 24, 2011
I am using ubuntu 10.04.I am trying to get 6 channel audio output.When i open alsamixer it does not show controls for multiple channels. I have seen on articles i read that alsamixer shows controls for multiple channels.how to configure 6 channel audio output on ubuntu 10.04.
View 2 Replies
View Related
Mar 25, 2011
KMix 4.6.0 in OpenSUSE 11.4 (x86) doesn't show up channels. It only shows "Internal sound Analog stereo" So I can't set the input/output channels and the headphone channel for my soundcard. The right soundcard drivers are installed (for Creative Sound Blaster Platinum Live Drive). Earlier versions of KMix worked just fine.
[Code]...
View 9 Replies
View Related
Oct 21, 2010
I can't get mythtv to play television with my Hauppauge HVR-850 tv card. I was able to view tv in mplayer, so I know that the card is working. The tv signal is broadcast only (no cable). I had to set the card type to DVB DTV capture card (v3.x) to get mythtv-setup to successfully scan. I was able to successfully scan both with a "full scan" and with a channels.conf file that I had generated earlier when tinkering tv in mplayer. Unfortunately, the mythtv frontend failed to play any live tv. It said "Error: MythTV is using all inputs, but there are no active recordings?"
[Code]...
View 1 Replies
View Related
Dec 8, 2010
I have recently installed Ubuntu 10.10 and it got really nice interface and is pretty user friendly, but I got an issue directed to sound. I have used Ubuntu 9 last time and had the same problems. So here are my problems: I got Realtek AC'97 ALC655 on-board sound card with 5.1 support and hardware mixing. By reading posts on google and this forums I got an idea it should work OOB but it won't.
The issues: *when I set the sound output to 5.1 + 1 stereo input it makes all the speakers work but act in weirdo way and testing the each speaker confuses me even more, because it's like(test=real sound source):
rearleft=subwoofer
rearright=center
center=frontleft
frontleft=rearright
frontright=rearleft
subwoofer=frontright. o.O
*the sound quality is crappy, it feels like it is old radio player because it requires some seconds for sound to 'condensate' and play normally with some crackles and other distortions.. And I'd like to also ask what sound system is mainly used in Ubuntu? Is it alsa,pulse or OSS? Since I can't find a way to see it.
View 2 Replies
View Related
Dec 17, 2010
i am trying to list radio channels in Tunapie2 and it won't list anything. It will display TV stations, but not radio.
I removed the software and Re-installed it with the same problem. I even removed most files from my .tunapie folder under my home and just left prefs and favorites alone. I did this before re-installing the software.
Icecast works fine, but not Shoutcast Radio.
View 9 Replies
View Related
May 26, 2011
I have a tv tuner card thats a couple years old, well since they are phasing out the old analog cable channels with digital ones, my card is not picking them up anymore. Is there any way to get the digital ones without buying a new card?
View 2 Replies
View Related
Sep 13, 2010
Get_iplayer worked very well for me under opensuse 11.2. After installing opensuse 11.3 it continued to work very well with the exception of STREAMING live BBC channels. These do not work at all. It seems the "modes" I am and have been using are not recognised. I use gnome and installed codecs using codecs_gnome.ymp for suse 11.3. I have no problem with any of the multimedia applications I use.
View 4 Replies
View Related
Mar 30, 2011
I have Ubuntu 10.10, Software Center does not work, and it always shows up errors. When I run:
Code:
dpkg --configure -a
I get:
Code:
Setting up gconf2 (2.31.91-0ubuntu3.1) ...
[Code]....
View 9 Replies
View Related
Jul 26, 2011
i meet a problem recently while i try to install a software via software center. After i start the software center, i input the name of software into the input filed. The panel keep the status of searching with nothing return. While i click the installed software, the right panel show nothing but the icon showing processing. My network works perfect, i can install software using the terminal. The ubuntu version i used is 10.14.
View 4 Replies
View Related
Jul 26, 2011
Every time I try to open the Software-Center It doesn't works, I've tried to reinstall, but the problem still, and I can't find the solution anywhere
When I try to open it with the terminal, it shows this message code...
View 9 Replies
View Related
Mar 4, 2010
I have downloaded the drives for ATI Radeon X1300 Pro and they will not install. The Catylasy also does not work saying that ATI drivers are not installed. Does anyone know how to get this to work?
View 2 Replies
View Related
Nov 19, 2010
Looking at the AMD/ATI download pages, I can't tell if catalyst control center (which installs the drivers) is fully functional for Ubuntu 10.10.
Has anyone had success with this software?
I have integrated ATI Radeon 3200 HD graphics on my motherboard and can't get things working.
View 5 Replies
View Related
Jun 24, 2011
My ubuntu software center will as stated not work properly, i will click a categ0ry and it will just sit there searching, same with if I just search for something, is there something wrong with my Ubuntu installation or is the ubuntu software center server down or something?
View 9 Replies
View Related
Nov 12, 2010
I have a personal laptop and a work laptop. personal is running ubuntu 10.4(which im planning upgrade to 10.10 soon) and Win-Xp on work laptop. I would like to run ubuntu on work machine, but i need to use vmware vsphere client regularly as half my work is related to it.
Is there an alternative available for vmware vsphere client? How can i have ubuntu on work laptop and have access to VMs via the control center? Is running Windows-XP on ubuntu via vitual box a resolution? If yes, I have 3GB of RAM on my work laptop, is that enough?
View 2 Replies
View Related
Apr 10, 2010
Few weeks ago I installed Linux Ubuntu 9.10 and everything was fine. However, Iḿ now triyng to install programs from the Ubuntu Software Center and it does not work properly. I just select the program I want to install and press the button, but I do not get a response. Net connection is ok, so the problem is somewhere else.
View 3 Replies
View Related
May 1, 2010
I have a new install of Karmic on my system with a flyvideo 3000 tv card installed. My problem is that it doesn't find any radio channels and the input channel is completely wrong. I don't have any sound on gnomeradio and can't find the config files to change the input channel. The only input option available to me is dig1 - can anyone point me in the right direction?
I have already read the Howto for this tv card and changed the device to radio0 in the setup. I have setup tvtime perfectly with sound channel as well as with a 5.1 surround configuration. I am missing my favourite radio channel. and I want to get rid of my windows installations once and for all! Update: I did a system update and some things have changed: the radio tower graphic on gnomeradio is now green (I assume it is getting a signal) but no sound yet.
View 2 Replies
View Related
Jan 17, 2010
After I've setup the ubuntu 9.10 I've found that the internet connection working incorrectly. I can ping or even connect to the internet sites with the telnet and see the raw html pages, but when I ran the software center or mozilla I have timeout error message. As a proxy settings I've setup the direct connection in both system and mozilla proxy configurations but it takes no reason. If I put the IP address instead of the domain name in the address bar of the mozilla browser then its loaded the web page correctly. It looks like this problem is relative to some system configuration of X about network (cause telnet google.com 80 working right). I'm using the dhcp connection to the D-Link DSL-504T router.
View 8 Replies
View Related
Jan 13, 2011
Update manager and software center both run, but when I click on "install," they both just sit there and don't respond. If I run software center from a command line, I get the error "WARNING - _on_trans_error: org.freedesktop.PolicyKit.Error.Failed." (There are no updates right now, so I can't get an error from the update manager.) Apparently they aren't invoking gksudo or whatever it is they need to elevate privileges. I can get around this by running them as root, but it is kind of annoying. I'm really surprised that no one else has had this problem, but I've searched it a number of times and I can't find any indication of someone having the same symptoms.
View 4 Replies
View Related
Feb 18, 2011
When I try to open Ubuntu software center, it appears on the process bar for about 10 seconds before it disappears. I can't get it to start.
I have tried alt+f2 and typing 'software-center', didn't help. I tried reinstalling ubuntu software center in Synoptic package manager, but I got this error message: "E: /var/cache/apt/archives/software-center_3.0.7_all.deb: subprocess new pre-removal script returned error exit status 1"
This started to happen after I reinstalled Ubuntu 10.10. After I did that, I got the 'modprobe: FATAL: Could not load /lib/modules/2.6.8.custem/modules.deb, no such
file or directory.' error. Could these two problems be related in any way?
View 9 Replies
View Related
Jun 29, 2011
The update manager gives me this error code...
has anyone experienced this before?
I can't update or download software.
View 5 Replies
View Related