General :: Error Calling Get_folders: Launch Helper Exited With Unknown Return Code 1
Jul 18, 2010
hi..
I'm using ubuntu 10.04 and whenever i start nautilus from command line it shows error:
Code:
root@aduait-laptop:~/Desktop# nautilus
Initializing nautilus-gdu extension
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
View 5 Replies
ADVERTISEMENT
Feb 12, 2011
I get the following message when trying to access my 1tb usb drive "Error mounting: mount exited with exit code 1: helper failed with: Error opening '/dev/sdr1': Permission denied Failed to mount '/dev/sdr1': Permission denied Please check '/dev/sdr1' and the ntfs-3g binary permissions, and the mounting user ID.More explanation is provided at [URL].. Really wierd thing is Linux Mint Debian reads it just fine
View 1 Replies
View Related
Aug 5, 2010
I have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
View 2 Replies
View Related
Aug 24, 2010
First of all: it's been more than 12 years ago since I worked with Linux, and a lot has changed in the meantime. But I considered it a challenge to install Ubuntu 9.10 and lateron upgraded to 10.04 LTS without any troubles, until now:
Except my main partition ("/") all other partitions fail to mount. All NTFS partitions from my other OS and also 2 other linux ext4 partitions I've made are not accessible anymore. and, what bothers me the most: I deleted those 2 new linux partitions in the meantime because I couldn't access them initially because Root was the owner (Duh! root is standard disabled in Ubuntu, right?). After an attempt to try to automount all partitions following the help guides I got now big grey errors on my splashscreen while booting, telling that an error occured with e.g. /media/Backup because it is missing or it cannot be mounted, with 3 options below: waiting, skipping or using a command prompt to solve this. I always choose Skip for safety.
Now if I want to see the content of all my other partitions I got a popup telling me unable to mount e.g. /media/Downloads and the message included:
[Code]....
View 9 Replies
View Related
Oct 25, 2010
when i want copy something from dvd my debian squeeze is total slow cpu ussage is 100% and write 2.2 mb/s and musick is stop and play. This same is on burning cd /dvd the device buffer is an about 10-15% this dvd is Pionier 116D on windows xp work perfect. I try benchmark dvd form gnome-disk-utility but i got Error benchmarking: helper exited with exit code 1: Device /dev/sr0 is too slow to benchmark
[Code]....
( everything works on debian lenny on the old kernel 2.6.26 ) I instaling a few kernel and compiling 2.6.35.7 with .config file form ubuntu on finaly didn't help
View 1 Replies
View Related
May 2, 2010
I bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
View 9 Replies
View Related
Feb 27, 2011
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
View 4 Replies
View Related
May 20, 2011
Getting this error seemingly randomly at login:
There was an error starting the GNOME Settings Daemon.
Some things, such as themes, sounds, or background settings may not work correctly.
The last error message was:
Launch helper exited with unknown return code 1
GNOME will still try to restart the Settings Daemon next time you log in.
I thought I might be logging in to fast, but it happened again when I had waited several minutes.
View 9 Replies
View Related
Apr 6, 2010
when i start my pc i have an error: Consolekit session error, unknown return code 0 when i click Ok it then starts my session
View 7 Replies
View Related
Jul 10, 2011
using 'ntfs-config' to make ntfs partitions mount on bootup so that I can access my data partition from Ubuntu. The first time I installed ntfs-config it would not run. I uninstalled and reinstalled it and then it ran, but it didn't seem to be responding very well. I attempted to tick the partition I wanted and set it to be writeable. After I closed the app ALL my ntfs partitions were mounted, even the windows and system reserved partitions, and when I attempted to unmount them I got the following error:
Unable to unmount Data
Error unmounting: unmount exited with exit code 1:
helper failed with
unmount /dev/mapper/isw_dfjjdefcdi_RAID5p4 is not mounted (according to mtab)
I tried rebooting. I tried uninstalling ntfs-config, then reinstalling it (now it wont run again). So I'm at a loss as to what to do. I simply want my data partition mounted on boot up and writable, not the others.
View 4 Replies
View Related
Oct 23, 2010
I have been running a live version on a 8 gig stick. Played nice for a couple of months but now when I try to access the native ntfs file system, I get the following error message.... Error mounting: mount exited with exit code 21: mount: according to mtab, /dev/sda6 is already mounted on /media/c
View 1 Replies
View Related
Mar 26, 2011
My computer has been acting quite strange lately. It's been taking longer to boot, and my sound doesn't play anymore (Only a high pitched sound is heard, and no hardware for sound is detected). Just recently, my Windows 7 Partition returned the error of Disk Error Occured. Press CTRL+ALT+DEL to restart.
Any way I can fix my whole issue, I think my desktop is starting to die on me :O (And its only about 7 months old T_T)
View 4 Replies
View Related
Mar 29, 2011
my windows xp system has recently been messed up, everytime i boot, i see the windows logo and then it reboots so i decided to liveboot ubuntu in order to recover the important files on my hard drive and then reboot. Problem is when i try to click on my "500GB Filesystem" I get this message.Unable to mount 500GB FilesystemError mounting: mount exited with code 13:ntfs_attr_pread_i:ntfs_pread failed:/input/output error Failed to read NTFS $Bitmap:Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk/f on Windows then reboot into Windows twice.The usage of the /f parameter is very important! If the device is SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/directory(e.g./dev/mapper/nividia_eahaabcc1). Please see the 'dmraid' documentationfor more details
View 1 Replies
View Related
Mar 31, 2010
Accidentally the usb plug on my WD "My Book" got halfway unplugged and I didn't notice it. when I rebooted it, it wouldn't read the drive. I tried using G Parted to repair it but no success, it just runs forever accessing the drive and never finishes. (I left it running an entire weekend and it didn't finish) the drive is formated ext3.
When I try to mount the drive in Ubuntu 9.10 it gives this error message:
Strangely if I boot into Windows and use the ext driver I can access the drive just fine. is this something I can fix? if needed I can use Windows to do any repairs.
View 4 Replies
View Related
Dec 10, 2010
I want to ask about Kmail. I have Kmail from Mandriva. I use Kmail for My Email. And When I reply Message, I found some trouble.
Sending failed:
Unknown error code 50. The message content was not accepted.
The server responded: "5.7.1 Message refused by BannedWord check. This email has been rejected. The email message was detected as spam." Please send a full bug report at [URL]. The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. This transport protocol was used: smtp.net
How to solve this email error I get when I try to send email via KMail.
View 2 Replies
View Related
Jun 1, 2010
I slipped on my expansion drive cable and it disconnected quickly, when I reconnected I got this error: Error mounting: mount exited with exit code 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
View 1 Replies
View Related
May 2, 2011
getting a error return code for useradd commandthe return code is 1cite or tell me the explanation of return code 1 .
View 1 Replies
View Related
Mar 31, 2011
I need to get a return code for the command ldapmodify.I try this and didn't workrc=ldapmodify -a -v -c -p $PORT -h $SRV -D cn=$USR,cn=Users,dc=company,dc=com -w $PWD -f $LDIFFILENAMECOUNTecho "return code " $rc what exactly the way to get the return code of that ?
View 2 Replies
View Related
Mar 9, 2010
I have a text file have carriage return code ^L , ^K , I can use vi to read this code , can advise if I want to see this code , what can i do
View 4 Replies
View Related
Aug 14, 2010
Iam trying to burn wave files to a cd that i ripped from a cd when i try burning to gets to 300 meg and stops with these errors CD RECORD RETURNED AN UNKNOWN ERROR (CODE 254) SOMETIMES USING TAO WRITING MODE SOLVES THIS ISSUE Using ubuntu 10.04
View 1 Replies
View Related
Apr 26, 2010
i am using Centos 5, i am trying to mount win2k3 server on centos machine.i am getting the following error.CIFS VFS: cifs_mount failed w/return code = -11
View 2 Replies
View Related
Jun 28, 2011
I learn C++ reading the <C++ primer 4th>, question1.2 let me test if return -1 how the compiler handle this exit code.
and in gcc (GCC) 4.1.1 20070105 (Red Hat 4.1.1-52), I get this show:
[youxi600@Arthas C++ Primer]$ cat q1_2.cpp
int main()
{
return -1;
}
[youxi600@Arthas C++ Primer]$ gcc q1_2.cpp -o q1_2
[youxi600@Arthas C++ Primer]$ ./q1_2
[youxi600@Arthas C++ Primer]$ echo $?
255
[youxi600@Arthas C++ Primer]$
anyone can give me an advise? Many thanks!
View 13 Replies
View Related
Aug 20, 2011
Today I was trying to make a LiveUSB for Fedora 15 with UNetbootin and when I inserted my USB stick, it blinked and then this error appeared:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
View 1 Replies
View Related
Aug 8, 2009
I just installed QT Creator through the repo but I can't build anything because I am getting this error...
Code:
unable to launch "p4":unknown error Does anyone know what package "p4" is? It says in QT creator that its a environment variable...
View 10 Replies
View Related
Mar 20, 2011
I am a beginner in ubuntu and only recently did i install Ubuntu 10.10 using Wubi. I am dual booting along with Windows 7 64bit. Before I got to know of Wubi, I created a free 20GB partition for installing linux. But since it was of no use, I decided to extend another partition adding this 20GB space. The problem now is that I am getting the following error while trying to access the partition.
"Error mounting: mount exited with exit code 12: Failed to read last sector (605949951): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
or the partition table is corrupt (partition is smaller than NTFS),
or the NTFS boot sector is corrupt (NTFS size is not valid).
Failed to mount '/dev/sda5': Invalid argument
The device '/dev/sda5' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?"
These are the results after running sudo fdisk -l /dev/sda:
"Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x76c4009c
Device Boot Start End Blocks Id System
/dev/sda1 1 1 992+ 42 SFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 1 13 102400 42 SFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13 6528 52326400 42 SFS
Partition 3 does not end on cylinder boundary.
/dev/sda4 6528 42717 290694144 42 SFS
View 6 Replies
View Related
Apr 15, 2009
I'm trying to call some Fortran 95 code in C, but I'm having problems with integers not having the same value in C as in Fortran, and changing values upon each run of the program. I think it has to do with the integer type, but I don't know how to fix it. I'm running Gentoo x86. Here are the files I've got:
foo.c:
Code:
#include <stdio.h>
extern int qux_();
main() {
[code]....
View 2 Replies
View Related
May 9, 2010
I'm trying to install a Linux driver for my wireless network card (D-Link DWL-G510) on my Red Hat Linux 7.1 machine with a 2.4.37.9 kernel. I downloaded the serial monkey driver from the sourceforge site and was able to successfully compile the rt73 module and load it into the kernel. The problem now is that everytime I issue the command ifconfig wlan0 up it keeps returning with the following error message: wlan0: unknown interface: No such device.
I'm at a loss as to what to do here. I specifed wlan0 as the alias for the rt73 module in the modules.conf and also tried to load the driver with the command modprobe rt73 ifname=wlan0 (this specifies the interface name according to the instructions packaged in the driver), but the error message still keeps coming up.
Is there something else I need to do in Linux to configure the wlan0 part or is the module not recognizing the wireless network card? It would be quite strange if it is the later since all information from the Internet is indicating this is the linux driver I should be using for mentioned wireless card.
View 1 Replies
View Related
Apr 27, 2011
Error while calling capget function (EINVAL)
View 1 Replies
View Related
Jun 6, 2010
It seems I cannot mount and unmount a USB Drive, it gives me the following error:
Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/DAVE-1
I have changed FSTAB, and now it looks like this:
proc/procprocdefaults00
sysfs/syssysfsnoauto00
usbfs /proc/bus/usb usbfs auto,user 00
devpts/dev/ptsdevptsmode=0620,gid=500
code....
View 2 Replies
View Related
Jan 28, 2011
Im trying to test the return for 0 or greater. The code not working. How can it be fixed ?
<linux command goes here>
RETVAL=$?
echo "$RETVAL"
if ["$RETVAL" -eq "0" ]
[Code]....
View 2 Replies
View Related
