General :: KMail Sending Failed - Unknown Error Code 50
Dec 10, 2010
I want to ask about Kmail. I have Kmail from Mandriva. I use Kmail for My Email. And When I reply Message, I found some trouble.
Sending failed:
Unknown error code 50. The message content was not accepted.
The server responded: "5.7.1 Message refused by BannedWord check. This email has been rejected. The email message was detected as spam." Please send a full bug report at [URL]. The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. This transport protocol was used: smtp.net
How to solve this email error I get when I try to send email via KMail.
When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
Iam trying to burn wave files to a cd that i ripped from a cd when i try burning to gets to 300 meg and stops with these errors CD RECORD RETURNED AN UNKNOWN ERROR (CODE 254) SOMETIMES USING TAO WRITING MODE SOLVES THIS ISSUE Using ubuntu 10.04
Getting this error seemingly randomly at login: There was an error starting the GNOME Settings Daemon. Some things, such as themes, sounds, or background settings may not work correctly.
The last error message was: Launch helper exited with unknown return code 1 GNOME will still try to restart the Settings Daemon next time you log in. I thought I might be logging in to fast, but it happened again when I had waited several minutes.
i have ubuntu 10.10 but now i have problem to access it so i boot from my live CD this what i get in checkcdfordefects.png when i select Try Ubuntu without any change to your computer that i get logo of ubuntu and take long time to load and not see desktop when press esc this error that i get GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
remark in bootf4.png F4.mode
i don't have option safe Graphics Modes i need to acess Try Ubuntu but i don't know what problem?
simple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
I have around 6 email accounts for business & private use that I retrieve and send via pop/smtp with Kmail (Version 1.11.4). But it seems that all my outgoing mail is only sent via one account (say first@gmail.com) even if I select another account for the outgoing I.D field and FROM field. When I look in the sent folder the headers shows the correct sent from account but my recipients headers show they were all sent from first@gmail.com! Ebay keeps bouncing my emails back too as a result saying the email is not registered. It used to work just fine so not sure what is happening. I have tried reinstalling Kmail/kdepim-4.2.4-x86_64-1.txz deleted all the accounts and recreated them but the problem persists.
I'm running an up-to-date Lucid Lynx, full encryption with LUKS on my Eee 1005HA. Since yesterday, after booting, the only "X" is can see is the mouse cursor above a console-like text, saying:
Code:
(process_290) GLib-WARNING **: getpwuid_(): failed due to unknown user id (0) init: ureadahead main process (410) terminated with status 5 fsck [clean, blah bla, check deferred, on battery]
[code]....
So, I googled for the getpwuid_r thing. I found a blog saying to install nscd (did so) and run it. But: To my inconvenience, after every booting, I have to switch to console 1, log in, run "sudo /etc/init.d/nscd restart" and then "sudo restart gdm".
"(process:325): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)"
It comes after choosing language, when the Ubuntu start-up logo shows with the 5 dut under it. I am trying to install Ubuntu Netbook on a little Compaq Mini.
When i try to install Ubuntu 11.04 or try without installing i get graphics like this:[URL] same with older versions, and on older versions i used to get this error: (process:257):GLib-Warning**:getpwuid_r():failed due to unknown user id(0) but on new version it dosent appear. My graphics card is: GeForce 7600GT MSI.
The problem emerged when I started to make the internal microphone and external speakers work [URL]. In either kernel 2.6.32-24 or 2.6.35-15 - cannot install any package with apt-get. Here is the error I get when installing just anything [URL]. Basically, here is it:
Code: ERROR: Build failed. Please review the build log at /tmp/alsa-driver-linuxant.3620.log dpkg: error processing alsa-driver-linuxant (--configure): subprocess installed post-installation script returned error exit status 2 Setting up libxslt1-dev (1.1.26-1ubuntu1) ... Errors were encountered while processing: alsa-driver-linuxant E: Sub-process /usr/bin/dpkg returned an error code (1)
I tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php -rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):
With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!
Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).
I'm running Kubuntu Karmic on my Dell Inspiron laptop - about 200 bug fixes behind because my only available internet is a cellular connection on a crappy wi-fi router - and last night, I suspended it, but it shut down instead. Not a problem, it does this fairly often, figure the RAM gets jostled or something.
But when I go to boot it up, it gets stuck at the pre-loading screen before getting garbled and dropping to the shell, where it says "mount: mounting /dev/disk/by-uuid/[insert hex code here] failed: invalid argument". Of course, mounting /root/sys, /root/dev and /root/proc fails, (directory does not exist) and it gives me the busybox initramfs prompt.
I get the following message when trying to access my 1tb usb drive "Error mounting: mount exited with exit code 1: helper failed with: Error opening '/dev/sdr1': Permission denied Failed to mount '/dev/sdr1': Permission denied Please check '/dev/sdr1' and the ntfs-3g binary permissions, and the mounting user ID.More explanation is provided at [URL].. Really wierd thing is Linux Mint Debian reads it just fine
I've imported a vcard addressbook in kontact. When I create a new mail and start typing something in the "to" input field, no contacts are automatically added. When I click the "select" button, nothing is found, except for the recently added email addresses. Nothing from my imported addressbook though.
This also didn't work in opensuse 11.3 KDE. Am I doing something wrong here?
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
I have download file from this site and have done these steps [URL]. tar -xvf ntfsprogs-2.0.0.tar.gz chown root.root -R ntfsprogs-2.0.0 cd ntfsprogs-2.0.0 ./configure make && make install
Still I have failed to mount ntfs partition with this command.. mount -t ntfs /dev/hda1 /mnt or ntfs-3g /dev/hda1 /mnt
The error is ................. mount: unknown filesystem type 'ntfs' I am using RHEL5.4 and kernel is 2.6.18-164.el5
I just discovered that my server is sending huge amount of data out at about 1Mbps. My immediate thought was the deluge bittorrent client, however it is supposedly not running (and a check confirmed its total active torrents was set to 0). I turned off the network and went in to Firestarter to set the outbound traffic to restrictive, turned on network again and no more data was sent. A look in Firestarter / Events showed a long list of random ports being used (see further down). How can I identify what program is sending all the data?
In Firestarter it doesn't really say much more than the port. Not sure if it is some misconfigured program or a malware/virus. I just got my ADSL connected a few days ago, and before that I used a mobile broadband (3G) as I just relocated. During the period I used the 3G the server might have been without firewall for a few days and it was also at this time I discovered an increase in network traffic (but I didn't really pay much attention at that time). I am running Fedora 10.
List of events from firestarter, my server is 192.168.1.100: Time:Jun 1 16:48:12 Direction: Outbound In: Out:eth1 Port:39435 Source:192.168.1.100 Destination:58.208.xxx.56 Length:129 TOS:0x00 Protocol:UDP Service:Unknown Time:Jun 1 16:48:12 Direction: Outbound In: Out:eth1 Port:6990 Source:192.168.1.100 Destination:112.94.xxx.212 Length:129 TOS:0x00 Protocol:UDP Service:Unknown Time:Jun 1 16:48:12 Direction: Outbound In: Out:eth1 Port:2973 Source:192.168.1.100 Destination:118.93.42.xxx Length:129 TOS:0x00 Protocol:UDP Service:Svnetworks .....
We Are Using Centos 5 64Bit with Kernel 2.6.18.92 with Amd Athlon ProcessorThe problem when calling setsockopt it return error errno:22 InvalidargumentThis code run on Macos ,Sunsolaris ,But fail to execute on Centos 5 64bit & The SCTP mailing group told me that this problem belongs to centosexample form ibm webside
i am using Centos 5, i am trying to mount win2k3 server on centos machine.i am getting the following error.CIFS VFS: cifs_mount failed w/return code = -11
I have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
First of all: it's been more than 12 years ago since I worked with Linux, and a lot has changed in the meantime. But I considered it a challenge to install Ubuntu 9.10 and lateron upgraded to 10.04 LTS without any troubles, until now:
Except my main partition ("/") all other partitions fail to mount. All NTFS partitions from my other OS and also 2 other linux ext4 partitions I've made are not accessible anymore. and, what bothers me the most: I deleted those 2 new linux partitions in the meantime because I couldn't access them initially because Root was the owner (Duh! root is standard disabled in Ubuntu, right?). After an attempt to try to automount all partitions following the help guides I got now big grey errors on my splashscreen while booting, telling that an error occured with e.g. /media/Backup because it is missing or it cannot be mounted, with 3 options below: waiting, skipping or using a command prompt to solve this. I always choose Skip for safety.
Now if I want to see the content of all my other partitions I got a popup telling me unable to mount e.g. /media/Downloads and the message included:
It then says an automatic fsck failed and a manual fsck must be performed, then the system restarted. I have done a manual fsck and it did nothing. I booted up the system with knoppix and did it, nothing.
I have the Huawei E160 UMTS Stick with a German SIM from O2. Actually it is a prepaid tariff where I can buy a daily data flat rate. And I am running Ubuntu 10.04 UNR. I use SMS to order and confirm a daily data flat rate and I made this working with gammu. Not the most comfortable but a very reliable solution (see In order to charge the my account or to check my account balance I can either use the Original Huawei Software under Windows or I can put the SIM in my mobile and dial a number code. By entering the code '4444' my UMTS account gets recharged with 10 EUR (debited form my bank account). With the code '*101#' I can check the account balance.
What I want to do: I want to be able to recharge my account and check my account balance with Ubuntu, so without taking the SIM out and putting it into a mobile phone (and obviously without using the original Windows software).Using gammu in order to send the necessary codes did not work so far. When entering gammu --getussd *101# I get the following result:
Press Ctrl+C to break... USSD received Status : No action needed
